Database Users

htc diamond

i'm so interested in htc diamond's appearance, is it possible to extract the diamond's ROM and install it in our BA? (of course with the adjustment, since our BA doesn't support video calling..)

evoluzionne said:
i'm so interested in htc diamond's appearance, is it possible to extract the diamond's ROM and install it in our BA? (of course with the adjustment, since our BA doesn't support video calling..)
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=403421

evoluzionne said:
i'm so interested in htc diamond's appearance, is it possible to extract the diamond's ROM and install it in our BA? (of course with the adjustment, since our BA doesn't support video calling..)
Click to expand...
Click to collapse
if you wanna keep same nagivation (touchflo 3D), the answer is NO, apparently it requires high-end graphic chip which most devices dont possess.

Touch Flo 3d / Manilla 3d cab??

Hi guys! I've beem looking for cab of Touch Flo 3d or Manilla 3d, but still found nothing! I have HTC Universal and just want to try this because it has vga screen too. But I found nothing except some port of manilla 2d, but not 3d. What is the difference and where can I download the cab of TF3D?
Thank you and sorry if im stupid

Nobody wants to help?.. =(

Is this the one you are looking for??
http://forum.xda-developers.com/showthread.php?t=405749

sidd said:
Is this the one you are looking for??
http://forum.xda-developers.com/showthread.php?t=405749
Click to expand...
Click to collapse
That's just a setup cab for Manilla if you already have it installed.
Does anyone know where the Manilla 3D cab is?

http://forum.ppcgeeks.com/showpost.php?p=514336&postcount=2
here is the manila and manila engine. you need to install both. although I don't think it will work for your device unless you have the proper open gls drivers and graphic accelerators. but best of luck.

fdimitris said:
Click to expand...
Click to collapse
Huh? You make no sense.

TomTom 7 running slow on HD

I have recently upgraded from the HTC Kaiser to the HTC Touch HD.
Before I switched to the HD I had TT7_910.9185 installed on my Kaiser and it worked perfectly.
After upgrading to the HD I tried installing the same 'TT7_910.9185_SIGNED.htc_diamond_cracked' cab that I had previously used on my Kaiser but it wouldn't install. Eventually though I found another version that did. This version was 'TT7_910.9185_QVGA blue'.
Since installing this new file onto my HD I have noticed that TomTom runs far slower that it used to on the Kaiser (ie. the graphics are more jerky!).
Is there is anything I can do to make the program run more smooth?
Maybe if anyone can point me to a different installation cab?
The problem is not linked to the map because I am using the same UK and Ireland 8.15.2024 map that I used to use on the Kaiser... The problem is also not linked to lack of storage space because there is plenty of space remaining on my SD card.
Also, Does anybody know if it is possible to flip the screen in TT7 on the HD?
Thanks in advance.
Loll

loll_l said:
....Also, Does anybody know if it is possible to flip the screen in TT7 on the HD?
Click to expand...
Click to collapse
I can't help you with the speed issue.
But to rotate the screen via the accelerometer, you can use third-party freeware like Gsen or Gyrator.

Cheers Chris Cross.
Can anyone help me with the speed issue?

Try version VGA black. I've got this one and it's alright.
http://rapidshare.com/files/160129459/ttn7.910.9185_vga_black.cab

the fps of tomtom on the HD is a lot slower than the kaiser when comparing the two side by side. this is due to the screen resolution.

dragon_soft said:
the fps of tomtom on the HD is a lot slower than the kaiser when comparing the two side by side. this is due to the screen resolution.
Click to expand...
Click to collapse
Exactly true. This is why to get the best performance from TT on the HD use the VGA Black cab and use less POIs. It will also be faster if you use it in 2D mode. You could also try u

dragon_soft said:
the fps of tomtom on the HD is a lot slower than the kaiser when comparing the two side by side. this is due to the screen resolution.
Click to expand...
Click to collapse
Use the good cab VGA Black, decrease the POIs, consider using it in 2D, maybe install the SD card speed fix in the HD Wiki of this site and disable Activesync from dragging down the system.

cheers Matterhorn...
is the 'good' VGA Black cab the one lipa47 posted a link to in this thread?

TF3D on other phones than htc devices?

hi!
yesterday i came around to play with the toshiba tg01. i liked it a lot, but i was missing the nice tf3d giu, since the toshi-stuff is b***sh**
so i was wondering if it's possible, to get tf3d on this device.
thanks for your answers. have a nice day!

WM is WM, no matter what device manufacturer is. TG01 AFAIR is WVGA, so there should be no problem on either installing TF3D by a cab or flashing a new rom with it (the better solution).

Is it possible to install Touch FLo 3D on a HTC TYTN2?
If so, can someone direct me to the cab file or rom?

Kamill said:
WM is WM, no matter what device manufacturer is. TG01 AFAIR is WVGA, so there should be no problem on either installing TF3D by a cab or flashing a new rom with it (the better solution).
Click to expand...
Click to collapse
hmm, thought maybe it might also be depending on the underlying hardware ?!

You could try using Manilla 2 but i understand its still a bit buggy:
http://www.modaco.com/content/toshi...es-toshiba-orange-spb-home2-etc/#entry1042985
http://forum.xda-developers.com/showthread.php?t=442154

[Q] Hero with Windows Mobile 6.5

I have a G3 Hero from china which have windows mobile 6.5.
Seems to work
I miss the Touch Flo UI. Its a HVGA screen.
Is it possible to run some cab to have a touch flo?

erm could you share a backup or something?`Oo

Are you sure it`s not just a chinese clone?

Hero
yes its something from china- but seems to be the same device (also htc sync contains fitting driver)

Afaik, this is a fake, as there have been a few similar posts here about these devices and how to do a hard reset when they crash.
But to the best of my knowledge, these are pretty much eschewed by devs, and I don't think touchflo is as simple as a cab to install.

but why in the hell would someone have WM6.5 instead of any other OS ???

a fake? my post? my device?
I have it - i use it.- it works- Touch flo is nothing else the a shell ala spbmobile shell (which works perfect). I already installed two T3DF's which runs in general but doesnt shows up the right ui. Do you thing HTC can change an 3rd party os?
Anyway- I believe key points for shell and working is OS (6.5) processor (Qualcomm /arm) and screen resolution HVGA . If that fits- I see no reason why not.
But back to my question. Who have an idea which of the "hundrets" which are out there could be the working one.

You could download an All In One cab for TF2D, and skin that. I am not so sure for TF3d though. You'd need to change the xml file(s) and resize all the images, unless of course, you manage to find one already done.
After all this is done, there is still no guarantee that it will work. Afterall, TouchFlo is for HTC devices and is HTC Inellectual property. I think they must be pretty annoyed that it has been ripped and thrown on to some China Phones, and also is able to be run on numberous samsung phones etc.

hannespreishuber said:
a fake? my post? my device?
I have it - i use it.- it works-
Click to expand...
Click to collapse
He ment the devise is a 'fake' hero eg. its not the realy thing - therefore fake not that you were lying

Thanks max.
You might get on better over in the winmo forums, as they will be more experienced in this stuff.