i'm so interested in htc diamond's appearance, is it possible to extract the diamond's ROM and install it in our BA? (of course with the adjustment, since our BA doesn't support video calling..)
evoluzionne said:
i'm so interested in htc diamond's appearance, is it possible to extract the diamond's ROM and install it in our BA? (of course with the adjustment, since our BA doesn't support video calling..)
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=403421
evoluzionne said:
i'm so interested in htc diamond's appearance, is it possible to extract the diamond's ROM and install it in our BA? (of course with the adjustment, since our BA doesn't support video calling..)
Click to expand...
Click to collapse
if you wanna keep same nagivation (touchflo 3D), the answer is NO, apparently it requires high-end graphic chip which most devices dont possess.
Related
I want to be able to run my TC in true vga mode like the touch diamond does. What rom do I need to install to do this.
Or will is there just a software package that will allow me to do this?
also,
what is the best rom for the touch diamond on the TC?
I've searched the forums, but there are so many different answers and roms out there...
Thanks
there is no best rom...most roms here are very good....
and you can't use vga on the tc because tc supports only qvga.....
cis4life said:
I want to be able to run my TC in true vga mode like the touch diamond does. What rom do I need to install to do this.
Or will is there just a software package that will allow me to do this?
also,
what is the best rom for the touch diamond on the TC?
I've searched the forums, but there are so many different answers and roms out there...
Thanks
Click to expand...
Click to collapse
Hehe...No.
That led me to another question. Is it possible to replace the screen + the appropriate drivers?
rhov23 said:
Is it possible to replace the screen + the appropriate drivers?
Click to expand...
Click to collapse
Thats a gr8 question rhov23! The TC would become a way better device than Diamond considering it has mem card slot and 1350 mAh battery. Anyone knows if it can be done?
Has anyone tried this, how should I remove the TouchFlo2D?
I think that's not possible.
is it because the screen resolution is 240x320?
http://forum.xda-developers.com/showthread.php?t=470285
Hmm I doubt very much the Jade doesn't have the actual hardware required (could be wrong, though).
Is there a libgles_cm.dll in \Windows ?
Chainfire said:
Hmm I doubt very much the Jade doesn't have the actual hardware required (could be wrong, though).
Is there a libgles_cm.dll in \Windows ?
Click to expand...
Click to collapse
not that i know off
What about Throttle Launcher or something similar to TouchFlo 3D that work without having 3D hardware?
Nope, no libgles_cm.dll in my \Windows
Dutch HTC Touch 3G, ROM 1.40.404.3 (21259), date 10/27/08/ Radio 0.27.30.09
I recently hard reset my phone, as im still running the stock rom, it drives me up the wall having put back my theme mods.
So ive made a cab which will install:
flat black start/program bar today theme tsk (no more beveled bar)
large start menu background (if you have touchflow large start menu on)
flat black wallpaper
works great with Manila Rhodium VGA
Mirror: http://rapidshare.com/files/213475619/PLAzmA_Black_Mod_Pack.cab.html
So all those nice Rhodium Apps are not running on the Omnia, is that right?
But why? Because different Screen-Resolution or because its not a HTC-Device?
z3ntn3l said:
So all those nice Rhodium Apps are not running on the Omnia, is that right?
But why? Because different Screen-Resolution or because its not a HTC-Device?
Click to expand...
Click to collapse
the release by XBmod is VGA, it was originally ported from WVGA i belive, as long as you can find a version thats the right resolution it should run, no idea where you can get it maybe ask xbmod if the extracted it or has it in cab format.
z3ntn3l said:
So all those nice Rhodium Apps are not running on the Omnia, is that right?
But why? Because different Screen-Resolution or because its not a HTC-Device?
Click to expand...
Click to collapse
1. The Omnia has different graphics hardware than the HTC Touch Diamond-Pro series (which just so happens to be the same hardware on the upcoming second generation aka Rhodium and Topaz or Pro2 and Diamond2) which have an ATI chip. The Omnia has and Intel Xscale Direct 3D chip which is integrated into the CPU. I believe the Diamond and Pro's card is not and is totally separate.
2. The Omnia runs at 400x320 or WQVGA. The Blackstone runs at 800x480 WVGA as well so installing on the Blackstone was as simple as cabbing it up (which btw isn't so simple). The Touch Pro and Diamond run at 640x480 and porting Manila2 to these devices was hard enough.
3. There is already Manila 2D from the Touch 3G and Opal (iolite) working on the Omnia which is good enough. Check this out if you already haven't (http://www.modaco.com/content/i9x0-omnia-http-omnia-modaco-com/273892/complete-install-guide-for-manila-touchflo-2d-on-i900/)
thanx for this plazma. works great on my touch pro.
one request however, it works fine in portrait mode but not in landscape. is it possible you can add that in as well?
jonnrb said:
2. The Omnia runs at 400x320 or WQVGA. The Blackstone runs at 800x480 WVGA as well so installing on the Blackstone was as simple as cabbing it up (which btw isn't so simple). The Touch Pro and Diamond run at 640x480 and porting Manila2 to these devices was hard enough.
Click to expand...
Click to collapse
240x400 (i'm sure it was probably just a typo)
redd214 said:
thanx for this plazma. works great on my touch pro.
one request however, it works fine in portrait mode but not in landscape. is it possible you can add that in as well?
Click to expand...
Click to collapse
Try a soft reset, if it still doent work can you post a screen shot.
hi!
yesterday i came around to play with the toshiba tg01. i liked it a lot, but i was missing the nice tf3d giu, since the toshi-stuff is b***sh**
so i was wondering if it's possible, to get tf3d on this device.
thanks for your answers. have a nice day!
WM is WM, no matter what device manufacturer is. TG01 AFAIR is WVGA, so there should be no problem on either installing TF3D by a cab or flashing a new rom with it (the better solution).
Is it possible to install Touch FLo 3D on a HTC TYTN2?
If so, can someone direct me to the cab file or rom?
Kamill said:
WM is WM, no matter what device manufacturer is. TG01 AFAIR is WVGA, so there should be no problem on either installing TF3D by a cab or flashing a new rom with it (the better solution).
Click to expand...
Click to collapse
hmm, thought maybe it might also be depending on the underlying hardware ?!
You could try using Manilla 2 but i understand its still a bit buggy:
http://www.modaco.com/content/toshi...es-toshiba-orange-spb-home2-etc/#entry1042985
http://forum.xda-developers.com/showthread.php?t=442154
If I disable Manilla and run the phone bareback without HTC Sence/Manilla enabled. Does there exist a tweak for the phone which will make the Windows icons, setting, etc turn while in landscape position?
Before you ask the Manilla 2.5 landscape project didn't work for me.
try to google , gyrator 2 , maybe you can use that ..
Thomas
berger-2000 said:
try to google , gyrator 2 , maybe you can use that ..
Thomas
Click to expand...
Click to collapse
Hey Thomas,
mærkeligt at HTC ikke har opfundet noget lignende selv?
Strange that HTC hasn't build something simular?
Virker det ???
dos it works ???
Thomas
It's not an automatic rotation, but try PLToggle in my sig - you may find it more suitable
berger-2000 said:
Virker det ???
dos it works ???
Thomas
Click to expand...
Click to collapse
It sure does. But not in HTC apps like Youtube!
johncmolyneux said:
It's not an automatic rotation, but try PLToggle in my sig - you may find it more suitable
Click to expand...
Click to collapse
One thing john.
I seem to remember a earlier version of HTC Sense which looks very much like the HTC Sense on HD2, but was shipping with automatic landscape and sold with Touch Pro 2.
Why didn't they put that version of HTC Sense/Manilla on HD2? Any idear?
Euroman28 said:
One thing john.
I seem to remember a earlier version of HTC Sense which looks very much like the HTC Sense on HD2, but was shipping with automatic landscape and sold with Touch Pro 2.
Why didn't they put that version of HTC Sense/Manilla on HD2? Any idear?
Click to expand...
Click to collapse
No idea mate. I do know that landscape support for Manila is coming in some ROM upgrades soon. I believe 2.02 (not yet officially released) has it.
johncmolyneux said:
No idea mate. I do know that landscape support for Manila is coming in some ROM upgrades soon. I believe 2.02 (not yet officially released) has it.
Click to expand...
Click to collapse
Lets hope they include full landscape support for the entire device both in Manilla and Windows
Euroman28 said:
Lets hope they include full landscape support for the entire device both in Manilla and Windows
Click to expand...
Click to collapse
BsB Tweaks does the job of adding auto-rotation for non-manila apps very nicely, and of course I'm going to plug PLToggle again
It's just manila that's lacking. I don't think we'll have to wait too long to get to a v2 ROM, which will hopefully have it.