I recently hard reset my phone, as im still running the stock rom, it drives me up the wall having put back my theme mods.
So ive made a cab which will install:
flat black start/program bar today theme tsk (no more beveled bar)
large start menu background (if you have touchflow large start menu on)
flat black wallpaper
works great with Manila Rhodium VGA
Mirror: http://rapidshare.com/files/213475619/PLAzmA_Black_Mod_Pack.cab.html
So all those nice Rhodium Apps are not running on the Omnia, is that right?
But why? Because different Screen-Resolution or because its not a HTC-Device?
z3ntn3l said:
So all those nice Rhodium Apps are not running on the Omnia, is that right?
But why? Because different Screen-Resolution or because its not a HTC-Device?
Click to expand...
Click to collapse
the release by XBmod is VGA, it was originally ported from WVGA i belive, as long as you can find a version thats the right resolution it should run, no idea where you can get it maybe ask xbmod if the extracted it or has it in cab format.
z3ntn3l said:
So all those nice Rhodium Apps are not running on the Omnia, is that right?
But why? Because different Screen-Resolution or because its not a HTC-Device?
Click to expand...
Click to collapse
1. The Omnia has different graphics hardware than the HTC Touch Diamond-Pro series (which just so happens to be the same hardware on the upcoming second generation aka Rhodium and Topaz or Pro2 and Diamond2) which have an ATI chip. The Omnia has and Intel Xscale Direct 3D chip which is integrated into the CPU. I believe the Diamond and Pro's card is not and is totally separate.
2. The Omnia runs at 400x320 or WQVGA. The Blackstone runs at 800x480 WVGA as well so installing on the Blackstone was as simple as cabbing it up (which btw isn't so simple). The Touch Pro and Diamond run at 640x480 and porting Manila2 to these devices was hard enough.
3. There is already Manila 2D from the Touch 3G and Opal (iolite) working on the Omnia which is good enough. Check this out if you already haven't (http://www.modaco.com/content/i9x0-omnia-http-omnia-modaco-com/273892/complete-install-guide-for-manila-touchflo-2d-on-i900/)
thanx for this plazma. works great on my touch pro.
one request however, it works fine in portrait mode but not in landscape. is it possible you can add that in as well?
jonnrb said:
2. The Omnia runs at 400x320 or WQVGA. The Blackstone runs at 800x480 WVGA as well so installing on the Blackstone was as simple as cabbing it up (which btw isn't so simple). The Touch Pro and Diamond run at 640x480 and porting Manila2 to these devices was hard enough.
Click to expand...
Click to collapse
240x400 (i'm sure it was probably just a typo)
redd214 said:
thanx for this plazma. works great on my touch pro.
one request however, it works fine in portrait mode but not in landscape. is it possible you can add that in as well?
Click to expand...
Click to collapse
Try a soft reset, if it still doent work can you post a screen shot.
Related
Hi in this thread I am really hoping that programers will
make this interface also for VGA devices..All this time I always
envy QVGA devices, because most programers only think about them..
We as VGA user can not enjoy the great interface program like that..
So please programer or skin makers..release for VGA devices also =)
So far I only found out pointui has make VGA version also
Come on all VGA users let us support programers to create
skin programs for VGA also in this thread =D
No response
VGA user feels okay?? without this cool interface program??
touchflo and itask allready support vga! the cube doesn't so I use mortbuttons, not so stylish but skin support and works good! also I think the new 3d cube is much slower than the old one.. I want the 0.4 cube with vga
TacoLoco said:
touchflo and itask allready support vga! the cube doesn't so I use mortbuttons, not so stylish but skin support and works good! also I think the new 3d cube is much slower than the old one.. I want the 0.4 cube with vga
Click to expand...
Click to collapse
Thanks for letting me know about mortbuttons
Yes I have tested ftouchflo and it works but there is only little bug..which when my I made my phone to sleep mode and wake it up again my phone will become smartphone =p can not use touch screen anymore..gotta soft reset..ugh
theme freak said:
Thanks for letting me know about mortbuttons
Yes I have tested ftouchflo and it works but there is only little bug..which when my I made my phone to sleep mode and wake it up again my phone will become smartphone =p can not use touch screen anymore..gotta soft reset..ugh
Click to expand...
Click to collapse
damn I thought the problem with the screen was a hardware issue (dell x51v) thanks very much maybe ftouchsl fixes this..
You can find the cube and tones of VGA cabs here:
http://forum.xda-developers.com/showthread.php?t=342039
teixeirabmb said:
You can find the cube and tones of VGA cabs here:
http://forum.xda-developers.com/showthread.php?t=342039
Click to expand...
Click to collapse
Thanks bro, its really a cool colection but the cube I want is the C++ edition
Hi
I see the TF3D from the Touch Hd has been cab'd and is running on the X1 (mine included)... but has anyone (point me if i'm being blind) started to port the X1 panels ready for the Touch HD>??
That would be funky!!!
come on guys... someone must have thought about it...
I got a X1 that i can dump from ... but just needs a chef to 'massage' it into a touch HD .. screen and res is the same.. made by the same.. so should be easy/easier???
Porting the panels to a TouchHD would be a lot different than importing TF3D to an X1. TF3D is just a today screen shell/plugin. The panel interface doesn't do that..you would literally need to dump and install the entire X1 rom onto a touch HD and replace whats there now.
mlinz said:
Porting the panels to a TouchHD would be a lot different than importing TF3D to an X1. TF3D is just a today screen shell/plugin. The panel interface doesn't do that..you would literally need to dump and install the entire X1 rom onto a touch HD and replace whats there now.
Click to expand...
Click to collapse
Nope, not correct.
Why its "easier" with tf3d is because HTC is making the roms with packages now, rather then dump it all in OEMAPPS etc...
The panel can be extracted as well, but thats not a task im gonna do..Im rather gonna remove it totally when I get a fully working kitchen, hard-spl etcetc..
Hey guys,
Even though I don't have a Diamond or Raphael, I decided to take a stab at this one, because I've seen many people requesting it.
So, without further ado, here is the download link for the dumped Manila from the HTC Touch HD:
http://www.4shared.com/file/74338802/4bedbf7a/MBarvian_Blackstone_Manila.html
And if it doesn't work, the link to the Touch Pro TouchFLO 3D:
http://www.4shared.com/file/74338804/a28e1a4f/MBarvian_Raphael_Manila.html
Please report back with your findings!
Hi my friend, i´d like to try this HD Manila but your links don´t work, can u please upload somewhere else?
Cheers
ikow this is probabaly a dumb question..but if im runnin a FUZE with TF3D why would i want the Touch HD version?
is there significant differences?
Late,
Jstar
JstarLuvsTina said:
ikow this is probabaly a dumb question..but if im runnin a FUZE with TF3D why would i want the Touch HD version?
is there significant differences?
Late,
Jstar
Click to expand...
Click to collapse
yes, like the ability to customize manila (change order of tabs, etc.), (should have) a smoother experience, and a whole new stock tab!
updated links, should work now
mbarvian said:
updated links, should work now
Click to expand...
Click to collapse
Now all is fine, thanks
I´ll report my findings soon.
Cheers
mbarvian said:
yes, like the ability to customize manila (change order of tabs, etc.), (should have) a smoother experience, and a whole new stock tab!
Click to expand...
Click to collapse
ok..so its easier than the manila customizer to customizer?? and the stock tabs are better, how? what makes them better?
should i just shut the hell up and try it..its ok, u can say so
JstarLuvsTina said:
ok..so its easier than the manila customizer to customizer?? and the stock tabs are better, how? what makes them better?
should i just shut the hell up and try it..its ok, u can say so
Click to expand...
Click to collapse
that's ok!
it is very easy to customize. I believe it's in the Settings tab that you can change the order (left to right) of the tabs by dragging and dropping. Also, you have a stocks tab on your Fuze?
mbarvian said:
that's ok!
it is very easy to customize. I believe it's in the Settings tab that you can change the order (left to right) of the tabs by dragging and dropping. Also, you have a stocks tab on your Fuze?
Click to expand...
Click to collapse
"stock" like "stock quotes"? like dow jones..if thats what ur talkin about THATS ****IN FANTASTIC .. i could so use that, especially with the changes comming down the ladder in the next few months.
ok ok.. im downloading now
now i need a stripped ROM with out TF3D
mbarvian said:
Hey guys,
Even though I don't have a Diamond or Raphael, I decided to take a stab at this one, because I've seen many people requesting it.
So, without further ado, here is the download link for the dumped Manila from the HTC Touch HD:
http://www.4shared.com/file/74338802/4bedbf7a/MBarvian_Blackstone_Manila.html
And if it doesn't work, the link to the Touch Pro TouchFLO 3D:
http://www.4shared.com/file/74338804/a28e1a4f/MBarvian_Raphael_Manila.html
Please report back with your findings!
Click to expand...
Click to collapse
This's probably a dumb question, but what's the different between yours and the one release from Mun_rus?
http://forum.xda-developers.com/showthread.php?t=443777
Is this with the weather tab position fixed?
Thanks.
landscape mode supported? I'm waiting for someone that tweaks manilaHD with action screen from raphael to port it on xperia
BTW TOuch HD is WVGA. this one apparantly is for WVGA because I've tried and can't see all the bottom part.
arcanehacker said:
BTW TOuch HD is WVGA. this one apparantly is for WVGA because I've tried and can't see all the bottom part.
Click to expand...
Click to collapse
well aint that a slap in the sack..
im installing it now .. this outta be interesting to see on my FUZE
ok, i installed this app but i can't find the execute file in the programs menu?
I have the HTC Pro
touchflo3d
does it work on htc athena ?
didnt work at all on my Fuze.
had to hardreset to get my original back to normal.
ill wait..its ok
no go for diamond here, tap here to launch touch flo --> starting touch flo -- > repeat couple of times and then crashes.. darn..
hoankhang000 said:
does it work on htc athena ?
Click to expand...
Click to collapse
I'd like that answer too. Any perceived problems in just trying it anybody (assuming the device has hard SPL that is)?
Doesn't work
On my Athena (VGA, WM 6, original ROM) I tried the Blackstone TF3D, after install it went into a loop
1 - "Tap here to launch TouchFlo 3D"
2 - "Launching TouchFlo"
Then back to 1 again, after a few loops it froze
After complete uninstall of Blackstone, I tried the Diamond TF3D, all files copied but no setting, or program to launch, it also did not appear in Settings/Today/Items where it could be checked.
Was looking forward to giving some better feedback than this but neither TF3D runs at all.
arcanehacker said:
BTW TOuch HD is WVGA. this one apparantly is for WVGA because I've tried and can't see all the bottom part.
Click to expand...
Click to collapse
does this issue affect all tabs?
I was aware of this, but thought it would not affect all tabs
Download Opera 9.5 Build 15445 FROM HTC IOLITE Stock Rom from here.
3 Versions stores to device only:
FOR AT&T FUZE USERS: Opera9.5_15445_VGA_FUZE.CAB
FOR EVERYONE ELSE THAT HAS A VGA DEVICE: Opera9.5_15445_VGA.CAB
FOR QVGA DEVICES: Opera9.5_15445_QVGA.CAB
Sweet! A new M2D build on the horizon plus now a new Opera build! Thanks Herg for all your hard work! Downloading now...will post back results.
debarron said:
Sweet! A new M2D build on the horizon plus now a new Opera build! Thanks Herg for all your hard work! Downloading now...will post back results.
Click to expand...
Click to collapse
please don't post results. i know it works cause i have tested it already.
herg62123 said:
please don't post results. i know it works cause i have tested it already.
Click to expand...
Click to collapse
Well then I'd hate to say this but the QVGA cab does not work on my HTC Touch running stock Sprint 6.1 ROM. Says "Unable to install Opera Mobile 9.5. The device does not have a valid ROM version.". I checked the cab and it's not limiting to specific platforms and I've had this error before on another Opera cab and removing the Setup DLL from the cab fixed it. I'll try that and let you know. Thanks.
same problem on my Sprint HTC Touch for the QVGA, running NFSFAN's rom and can't install.
Removing the Setup DLL from the cab fixes it.
ooppppssss hold on i will fix that
ok it is fixed and reuploaded now
installs now, thanks. seems pretty speedy!
Hi, some question:
We can use flash in this build??
Do you gonna release Sd version for the app (for qvga version)?
Thanks
herg62123 said:
FOR AT&T FUZE USERS: Opera9.5_15445_VGA_FUZE.CAB
Click to expand...
Click to collapse
Does this also include all the other Raphael devices like the unbranded Touch Pro or an Xda Pro or is this really a Fuze-only build to be used on AT&T's network?
anybody know the changes?
sorry that i'm asking, but i was looking for a changelog everywhere, no luck.
schaggo said:
Does this also include all the other Raphael devices like the unbranded Touch Pro or an Xda Pro or is this really a Fuze-only build to be used on AT&T's network?
Click to expand...
Click to collapse
the one labeled - fuze vga - is set up for at&t since i have a fuze
the one labeled - vga - is for any vga device
the one labeled - qvga - is any qvga device.
Ok, thats what I figured, it might be preconfigured (guess proxy settings and stuff) specificly for the Fuze and not any Raphael. Thanks for the answer, will try the build. I'm on 15202 now and it works really well on a Touch Pro, massively better than the 15529 or so, it's got zoom and renders really quickly.
Is there any consensus on whether 15202 is the most reliable/effective Opera build thus far?
I will tell you which one works better for me, this one or the 15202 once I managed to get this on my mobile. I'm currently fighting with Netbook-Touch Pro-connectivity related problems and I'm too lazy to get out of bed to try the whole thing upstairs with my Notebook...
This is the best bulid of Opera 9.5 i have used and the fastest, works fine on Htc Blackstone
Mirrors
Ola
Here some mirrors for the files.
Thank you for sharing this !!!!!!!
The one labeled - fuze vga - is set up for at&t
http://rapidshare.com/files/191475388/Opera9.5_15445_VGA_FUZE.CAB
The one labeled - vga - is for any vga device
http://rapidshare.com/files/191475387/Opera9.5_15445_VGA.CAB
The one labeled - qvga - is any qvga device.
http://rapidshare.com/files/191475386/Opera9.5_15445_QVGA.CAB
Gr
standard opera splash please
Acceptable said:
Is there any consensus on whether 15202 is the most reliable/effective Opera build thus far?
Click to expand...
Click to collapse
lucian777 said:
This is the best bulid of Opera 9.5 i have used and the fastest, works fine on Htc Blackstone
Click to expand...
Click to collapse
Cant agree, lucian777. For me 15202 is better, mainly because
Nicer loading screen
Adaptive Zoom settings are right after install, no manual tinkering
15202 got the bottom left zoom slider
cant make out any speed differences so far
So no advantages but no real drawbacks either, so I stay with 15202 on my Touch Pro.
Edit: Big drawback, this 15445 isnt uninstallable!
Edit 2: And no other Opera will install ontop of it, tells me installation failed... gotta love those hardresets... *grmpf*
So just got my Xperia the other day and am looking to make the jump to Touch Flo 3d. Looking on the forum here there's at least 6 different versions and I'm kinda confused on what the differences between these even are.
Can someone please clarify the difference between:
Touch Flo 3d 1
Touch Flo 3d 2
Touch Flo 3d HTC Blackstone
Manila
Manila Touch HD
Manila V2
I noticed that there's also a lot of confrontation between installing touch flo as a ROM or just running it on a panel from a CAB file. What are the advantages of either. If possible I'd prefer to keep the Xperia panels and just run Touch Flo in a panel.
Also while I'm at it since I don't think it's worth another thread, can I run the Windows Mobile 6.5 beta in a panel or do I have to install it and wipe out windows mobile 6.1?
I am quite sure that WM 6.5 needs to be installed instead of WM 6.1.
About the Touch flo's im in the same boat... i just would like the "best" version as a panel. So thank you for bringing this up
Windows mobile is the platform on which all your programs run, including the panel manager and touchflo.
There's currently two* versions of TF3D, TF3D 1 and TF3D 2. Manila == TF3D.
The best and newest at the moment is TF3D2, as stickied, it has landscape support, but it also has a few bugs, as it's a beta build. All in all, it works more that good enough.
Best thing I can recommend is flashing one of itje's ROMS, preferably the new 4.0, which has TF3D2. This way, you'll have TF3D as your homescreen, but also the panels.
* Not including different beta's.
Alright thanks a lot, looks like I'll be installing that Touch Flo 3d2 ROM then.
Quick question though. Even if I flash this I'm going to assume I'm not resetting windows mobile since the xperia interface and touch flo 3d are just "skins" for windows mobile, so I wouldn't have to reinput all my settings?
When you flash your ROM, everything will be erased.
If you however just want to install TF3D and keep everything, you will have to wait for daran_clarke to finish his TF3d .cab, which you just install on your phone just like any application.
i recommend running TF3D2 from a rom, because the responsiveness and speed is increased alot. i recommend itje's touch it landscape ver 1.1 rom, as this is the most stable and normal version, as opposed to ver 4 which is lets say... a bit different. if you are intersested i will provide the rapidlinks to this no longer available rom
Already installed itje's V4 and am extremely pleased since it hasn't crashed yet. However I tried going on youtube and the video is really choppy and out of sync with the audio, which used to not be the case. Tested it both on wifi and edge and the data speed makes no difference. Any ideas?
NiklasK said:
Already installed itje's V4 and am extremely pleased since it hasn't crashed yet. However I tried going on youtube and the video is really choppy and out of sync with the audio, which used to not be the case. Tested it both on wifi and edge and the data speed makes no difference. Any ideas?
Click to expand...
Click to collapse
Itje's V4 is (although the filename doesn't tell you this) still in it's beta stages. Some problems will still occur, but Itje is working on it.
That's the reason flext recommended you 1.1.
Am I supposed to have to reinstall the radio, because my EDGE has stopped working altogether since installing Touch Flo 3d?
NiklasK said:
Am I supposed to have to reinstall the radio, because my EDGE has stopped working altogether since installing Touch Flo 3d?
Click to expand...
Click to collapse
Nope, that seems to be an unrelated problem. I've never seen reports of EDGE failing after TF3D installation. If the problem persists, you might want to try a hard-reset (also removing TF3D again).
flashing to tf3d 2 rom
iam kinda new at this and iam trying to flash to tf3d 2 rom because the theme that iam trying to get does not work with my stock rom..
NiklasK said:
So just got my Xperia the other day and am looking to make the jump to Touch Flo 3d. Looking on the forum here there's at least 6 different versions and I'm kinda confused on what the differences between these even are.
Can someone please clarify the difference between:
Touch Flo 3d 1
Touch Flo 3d 2
Touch Flo 3d HTC Blackstone
Manila
Manila Touch HD
Manila V2
I noticed that there's also a lot of confrontation between installing touch flo as a ROM or just running it on a panel from a CAB file. What are the advantages of either. If possible I'd prefer to keep the Xperia panels and just run Touch Flo in a panel.
Also while I'm at it since I don't think it's worth another thread, can I run the Windows Mobile 6.5 beta in a panel or do I have to install it and wipe out windows mobile 6.1?
Click to expand...
Click to collapse
TouchFlo 3D 2 works in portrait and landscape mode [latest version]
TouchFlo 3D 1 has touch flo tabs but only in portrait mode
Manilla is the TouchFlo cube [it isnt touch flo 3d at all]
Manilla HD is the same as Touch Flo 1
Manilla V2, I think is Touch Flo 3D.....
Forgive me for the guessing...I don't use touch flo