Related
Hey folks-
I tried posting this in the S2U2 0.99 thread but there are countless pages and I figure it was like dropping a needle in a haystack. Any smartphone users out there have any experience using S2U2 on it?
My wife's Moto Q will run it, and it will function properly, except it almost appears as if the UI is set to portrait and the background set to landscape. The landscape wallpaper is chosen, but nudged down and left so it leaves equally sized black bars on the top and right side of the screen. The rest of the UI elements look set to portrait, as they are horizontally short (guessing 240 but I don't know for certain) and the slide bar is scrolled off the bottom of the screen. The clock/curtain and the carrier info bar are properly aligned to the top left corner of the screen, but as I said they appear to be portrait as they end at approx 240px.
Does anyone out there use the latest S2U2 with a smartphone (or, better, the Moto Q specifically) and has experienced/resolved similar problems? TIA
Edit: I tried this with and without ddraw and safemode on, and I get the same results every time.
I don´t know. Sorry
i think he is using the dpad function of unlocking s2u2. i think your gonna end up with issues with the looks though. just wasnt meant for a smartphone squarish screen.
Wow, everywhere I post this someone without knowledge of S2U2's capabilities tells me smartphones don't have touchscreens. Thanks for the news flash
Yes, ajk511 is right, mostly. The Q has a 320x240 screen, not square, but even if it did, the S2U2 notes say it supports square screens and smartphones. I'm looking for input from anyone who's used S2U2 with a Q or similar device and experienced or resolved this problem.
I can't tell what S2U2 will do on a Q, but it works perfectly on a Smartphone emulator, except the CallerID part. Could you provide a screenshot of what you've done? I guess you may have to prepare a separate set of wallpapers for your Q as QVGA device needs a 240x320 portrait wallpaper while your Q is 320x240.
Can't speak for the Q, but on my wife's HTC Excalibur it works flawless. I did however make a custom 320 wide by 240 high wallpaper that is running in portrait(!) mode as far as I remember. Slider is visible and working fine with the DPAD.
I can confirm that s2u2 works without problems on my Samsung i600, after I had set NoPowerSuspend to 1 (before that if my phone screeen has been turned off, it stayed off and I can unlock device only after pluging headset wire into the slot), and CallerID to 0.
Now I have one question: how can I set s2u2 to lock keypad on homescreen only?
Sorry for my English
This work in a Smartphone HTC S620?
I had a problem with my samsung i320 (landscape 320x240). S2U2 and settings start in the wrong orientation. unlock is working with DPAD, but it's impossible to use settings
Thanks for your answers
Treo 500v has the same problem.
I started with 1.01 and then 1.05, 1.22b, 1.30 and 1.32.
Always the same problem
BoZ
I guess S2U should have its own help forum. Anyways The problem I am having is that when I turn the back light off and turn it back on S2U pops up just fine but I also get an error notification "Cannot execute \Storage Card\Program Files\XMT_OnPowerOn.exe" Does anyone know if this is a S2U problem or something else?
Running on Q9
I've been running s2u2 on a Motorola Q9c for about 3 weeks now with minimal problems. I love it! I'm just trying to learn my way around some of the power management options, and figure out how to change the size/date of the date. So far so good though, I'm very impressed.
Hi, which s2u2 version are u using?
thanks
newest version works fine on HTC Ozone. Trick is you need to use mydialer to change config, its eazier that way.
I actually used S2U2 with a Pantech Matrix Pro and it worked fine. The only problem is when the screen dims, then goes to the lockscreen, then the screen shuts off, the phone shuts down immediately! Also I could not figure out how to access the settings because it was meant for a PPC. Any ideas?
Try to edit settings via registry values in HKCU\Software\A_C\S2U2
try adjusting your backlight settings, to time out longer.
UltraMagnus said:
Hey folks-
I tried posting this in the S2U2 0.99 thread but there are countless pages and I figure it was like dropping a needle in a haystack. Any smartphone users out there have any experience using S2U2 on it?
My wife's Moto Q will run it, and it will function properly, except it almost appears as if the UI is set to portrait and the background set to landscape. The landscape wallpaper is chosen, but nudged down and left so it leaves equally sized black bars on the top and right side of the screen. The rest of the UI elements look set to portrait, as they are horizontally short (guessing 240 but I don't know for certain) and the slide bar is scrolled off the bottom of the screen. The clock/curtain and the carrier info bar are properly aligned to the top left corner of the screen, but as I said they appear to be portrait as they end at approx 240px.
Does anyone out there use the latest S2U2 with a smartphone (or, better, the Moto Q specifically) and has experienced/resolved similar problems? TIA
Edit: I tried this with and without ddraw and safemode on, and I get the same results every time.
Click to expand...
Click to collapse
It works just fine on my Q..on screen shows the battery charging....i'm using S2U2 v2.41..because it's difficult to editing the s2u2 setting ( b'cause Q is not touch screen.. ) so i use my mobiler apps to control it through PC...
Ray_jai said:
Hi, which s2u2 version are u using?
thanks
Click to expand...
Click to collapse
Try this latest version 2.43 of S2U2, it really works fine on Windows Mobile Smartphone 320x240, specially for Motorola Q CDMA or Samsung GT-C6625 Valencia but settings mode cannot be access, so you should try to edit settings manually via registry values in HKCU\Software\A_C\S2U2 and goodluck...
I'm testing this nice app but I've got several problems after the first setup.
If i insert in the varius tab more than 2 today plugins like Pockerweaver and Pocket Digital Clock in one tab and Todayagenda in other one, every time i enter into the program setup for adding or modifing something and i confirm the modification, my device hang. I need to softreset.
Does someone else have the same problem?
I've got I tyTn (I've tested with both WM 6.0 and 6.1)
lightman3dd said:
I'm testing this nice app but I've got several problems after the first setup.
If i insert in the varius tab more than 2 today plugins like Pockerweaver and Pocket Digital Clock in one tab and Todayagenda in other one, every time i enter into the program setup for adding or modifing something and i confirm the modification, my device hang. I need to softreset.
Does someone else have the same problem?
I've got I tyTn (I've tested with both WM 6.0 and 6.1)
Click to expand...
Click to collapse
I've experienced that sometimes during set up...It happened somewhat randomly, but not so much to prevent me from doing what I needed to set up. Also, it doesn't do it now that everythig is set. You might try:
1. make sure all your plugins are not enabled in the normal Today set up before you try to add them into a tab or sub tab.
2. properly set the "Activate plugin on startup" and "Save memory" checkboxes. I generally have the first only checked on the "main" tab items and unchecked on all other tabs. Also, I generally have the "Save mem" unchecked for the main, and checked for the others.
I can't say this will stop it from happening, but i did expereicnce different results when I played with them some...
jomo25 said:
I've experienced that sometimes during set up...It happened somewhat randomly, but not so much to prevent me from doing what I needed to set up. Also, it doesn't do it now that everythig is set. You might try:
1. make sure all your plugins are not enabled in the normal Today set up before you try to add them into a tab or sub tab.
2. properly set the "Activate plugin on startup" and "Save memory" checkboxes. I generally have the first only checked on the "main" tab items and unchecked on all other tabs. Also, I generally have the "Save mem" unchecked for the main, and checked for the others.
I can't say this will stop it from happening, but i did expereicnce different results when I played with them some...
Click to expand...
Click to collapse
Thanks a lot for the answer...I've followed you tricks...but in my case the problem appears in a systematic way :-((((
I love UL but its still a tiny bit buggy. It just doesn't seem to like certain today plugins. I don't have a rhyme or reason for it, but sometimes it doesn't play nice.
PocketWeaver?
Could it be PocketWeaver? I've used UL for several months now with MANY today plugins. Currently I am using it with both PocketDigitalClock and TodayAgenda. Since PocketWeaver is the only one I haven't tried could that be what UL is not behaving well with?
At one time I had 5 plugins running in 3 tabs and UL setup has never hung for me.
lightman3dd said:
I'm testing this nice app but I've got several problems after the first setup.
If i insert in the varius tab more than 2 today plugins like Pockerweaver and Pocket Digital Clock in one tab and Todayagenda in other one, every time i enter into the program setup for adding or modifing something and i confirm the modification, my device hang. I need to softreset.
Does someone else have the same problem?
I've got I tyTn (I've tested with both WM 6.0 and 6.1)
Click to expand...
Click to collapse
How long did you wait before a soft reset. On my device I have to wait quite a bit for the screen to refresh after any configuration changes. I have 4 tabs with 7 plugins going right now and it does not hang.
I noticed I couldn't get the Audio Manager plugin to work properly in UL, wouldn't expand on selection.
I have phone weaver running without issue. Phone Alarm was giving me problems and very infrequently batterystatus
rifraf1 said:
How long did you wait before a soft reset. On my device I have to wait quite a bit for the screen to refresh after any configuration changes. I have 4 tabs with 7 plugins going right now and it does not hang.
Click to expand...
Click to collapse
I wait several minutes...and it hangs also doing a simple INI refresh...
lightman3dd said:
I wait several minutes...and it hangs also doing a simple INI refresh...
Click to expand...
Click to collapse
UPDATE: i think to have found the reson why...I've set all the ico dimension to a "correct" dimension, like for an ICO with maximum of 48px i've set 48px and not 52 or something more and for an ico of 68 i've set 68 not more or less...and all is working weel now. I can do ini refresh and modify the settings without any phone hang.
I figured I try out UltimateLaunch and I made a new tab and added BatteryStatus today plugin. It locked up, after soft reset it locks up within a few seconds. Any ideas how I can fix this without a hard reset? Thanks
Chris
EDIT: I was able to get to the Today screen and disable UltimateLaunch after about 20 tries and some caffeine! I disabled battery status in the today screen this time and turned of the minimize in Ultimate Launch. This fixed my issues. Thanks anyway.
Chris
Sorry a newbie question. How do I actually put in more than 1 today plugin into the home tab of UL? Does the software allow that? I would like the whole today screen to rotate n not only part of it.
Thanks in advance for the reply.
[email protected] said:
Sorry a newbie question. How do I actually put in more than 1 today plugin into the home tab of UL? Does the software allow that? I would like the whole today screen to rotate n not only part of it.
Thanks in advance for the reply.
Click to expand...
Click to collapse
Adjust the height and add a 2nd plugin, just like you did with the 1st.
[email protected] said:
Sorry a newbie question. How do I actually put in more than 1 today plugin into the home tab of UL? Does the software allow that? I would like the whole today screen to rotate n not only part of it.
Thanks in advance for the reply.
Click to expand...
Click to collapse
If you want to have more than one today plugin on the same tab (i.e., HTC Home with another plugin underneath it) be sure to "combine" the tab.
FYI, the perfect fixed height for UL, with the system tray still visible, is 245 pixels.
Thanks very much for all your help. I got it.
Maybe you Gurus can help me....
I wish to have MyFaves as a UL plug-in but it will not show up unless I have it checked in the Today screen items, then it shows up twice (once in UL & once on my Today screen). Can anyone help me? BTW I have a cooked ROM & am using DuPrade's MyFaves cab file.
dzelaya18 said:
FYI, the perfect fixed height for UL, with the system tray still visible, is 245 pixels.
Click to expand...
Click to collapse
...267 if you don't have the system tray.
I too experienced some lockup issues using Battery Status. I have since unloaded it and no lockups since. I'm thinking it's anything actively monitoring the system that UL doesn't like. Although i have RLToday installed and using it for my msgs notifications, but that is a registry read.
I've got an appointment set up in Outlook on the PC for 7pm-11:30pm this evening.
When I synchronised, the home screen on the HD says "Tomorrow 19:00 - 23:30" instead of "Today"
If I tap the appointment on the home screen to enter the calendar program, it correctly shows under today's date, with nothing tomorrow.
Possible bug in TouchFlo ?
Anyone else seen this ?
Or am I being really dumb and missing something obvious ?
EDIT : After a soft reset, the word "tomorrow" vanishes. So it looks like TouchFlo failed to update the home screen properly until the device was reset.
my bug is different
I have a different bug, no mine doesnt seem to do what you say... as far as I can see...
My bug is that when you set in options to always display day, week or month view and you quit calendar and start it again, bang it goes back to Agenda view (which is rubbish)... is there a fix to get it to stay in what its asked to stay in.
truthseekers said:
I have a different bug, no mine doesnt seem to do what you say... as far as I can see...
My bug is that when you set in options to always display day, week or month view and you quit calendar and start it again, bang it goes back to Agenda view (which is rubbish)... is there a fix to get it to stay in what its asked to stay in.
Click to expand...
Click to collapse
I'm seeing the same thing. When selecting the calendar or appointment from touchflo it always takes you to the agenda view as opposed to the default view you select in the calendar.
bugsy said:
I'm seeing the same thing. When selecting the calendar or appointment from touchflo it always takes you to the agenda view as opposed to the default view you select in the calendar.
Click to expand...
Click to collapse
I was having the same issue.
I needed to reset my device (Pressing power button until it gives the pop up to turn off) and once it came back now it is working fine..
I can set it which way I want now and the setting is sticking...
...and more:
I got all of them... calender always opening in agenda view, a TOMORROW instead of a TODAY until reset, AND another one: IF you activate lets say THREE alarms, only the first one shows up on the today screen, no matter what time it is... So if it the first alarm is over, my Touch ELF's display would change to show to the next open one, but the HD does NOT. Ridiculous...
I see 4 every day all the call.!?Sync by activesync.How to delette this sync?
I too am bothered with this problem.
I want my calendar view set to Month view. So I've choosen Month view form the options and everything seems OK. However, everytime I choose calendar from the home screen it briefly starts in Month view, and then opens the agenda view.
I've tried everything I could find on the net to solve this problem, including:
- Adjusting the calendar to month view and afterwards soft-resetting my HD. Still the same problem.
- Adding -vm to the shortcut in the calendar shortcuts in the Windows directory and in the Windows/Startup directory. this opens the calendar in month view, but from the Home screen still no success.
- Searching the registry for relevant settings, but i'm not knowledgeable enough yet to find the correct ones.
By the way, if I set my calendar view to Day or Week, the same type of problem occurs.
Since I really don't like the Agenda view this really starts to annoy me.
Any other thoughts out there on something I could try?
Regards, Jack
i have the same problem! does anyone know abetter more fingerfriendly calendar program with tf3d integration?
Deixi
Strange stuff...
I don't have the problem everybody describes, but instead next day appointments show with a DS_TOMORROW: prefix instead of Tomorrow: The font is big and it occupies quite a lot of space, looks buggy and pretty annoying.
With regard to a finger friendly calendar - I used Agenda One, but it doesn't work from TF3D Home screen by default - the link needs to be edited, and I can't find the thread where the way to do it was described.
With regard to opening the calendar in the "right" view, it should be relatively easy to fix.
Searching the registry won't help because the links in RF3D seem to be hardcoded - this is the bad news.
The good news is that there's a Manila Patcher which allows to change things. If you know the arguments (somebody mentioned -vm), you can change those.
With regard to today's events prefixed with "Tomorrow", it seems that this is indeed a Manila bug, it just doesn't refresh data. You don't have to reset the device, disabling and enabling Manila is enough. This is not a workaround of course, because resetting is actualy easier, just to reiterate that TF3D is at fault.
Not 100% sure, but if I'm using the device around midnight then TF3D doesn't roll the appointments. If I'm not then it does.
Could be a complete red-herring though. . .
Does HTC have any bug tracking system available for the public, at least for submitting bugs?
Thanks for the tip on SSMaPa vangrieg!
Installed it, added "-vm" in the arguments box belonging to calendar.exe, and after some messages I am now enjoying my calendar in glorious Month view!
And before I forget, the other possible arguments are: -vd for Day view, -vw for Week view, -vy for Year view and of course -va for the dreaded Agenda view
By the way, this is what HTC Support mailed me after just one day's wait:
In order to solve your problem, you will need to hardreset your device. All data and settings will be deleted, so please back-up all your data first. Remove your SIM and memory card and go to Start, Settings, System, Clear Storage and follow the on-screen instructions.
Click to expand...
Click to collapse
Might try that some day, but for now this seems to be werking fine!
Regards, Jack
fasty said:
I've got an appointment set up in Outlook on the PC for 7pm-11:30pm this evening.
When I synchronised, the home screen on the HD says "Tomorrow 19:00 - 23:30" instead of "Today"
If I tap the appointment on the home screen to enter the calendar program, it correctly shows under today's date, with nothing tomorrow.
Possible bug in TouchFlo ?
Anyone else seen this ?
Or am I being really dumb and missing something obvious ?
EDIT : After a soft reset, the word "tomorrow" vanishes. So it looks like TouchFlo failed to update the home screen properly until the device was reset.
Click to expand...
Click to collapse
I too have this problem, and the thing at fault here is apparently the Touch Flo 3D interface. Just as described in the original post, the calendar app itself displays everything correctly, but on the Today Screen in Touch Flo, "tomorrow" entries do not change over to "today entries" when the date changes, i.e. it fails to update.
A soft reset does indeed correct the problem, but it is also sorted out if you change the calendar content in some way. This morning, for instance, I made a simple edit (changed the location variable) in one of the entries, and PRESTO! - the entries on the Today screen were properly presented.
Now, I'm not a programmer, but it seems to me that the Today screen doesn't recognise a date change as something that should trigger an update. Shouldn't it be able to force this somehow?
Speaking about Calendars, does anyone know how to change the text color of the topic while on the TFLO3D home screen.
It is a grey color and it makes it impossible to read.
Hi there, I have the same bug with Touch Flo, but no need to reset the phone. Just go in Start / Settings / Today, untick Touch Flo, do OK, this closes the Touch Flo applications. Then rego there to tick Touch Flo, this runs Touch Flo with the right information.
HTC advised me to hard-reset the device. The problem continues.
Soft resetting touch-flo does seem to cure the problem of the immediate appointment, but it is not a permanent fix.
- Steve
I have another bug in the calendar of the Touch HD.
When I create an all-day event with a reminder, it just doesn't remind me : no ring, no vibe, just the screen that is switched on, and the pop-up appear. But it works fine with a regular appointment. Do you have the same bug ?
I don't know about you guys but i wanted to test this out so i entered some false appointments for 3 days in a row and i'm on the 2nd day and it has worked wonderfully.
It doesn't say 'today' but the top rows are showing today and has 'tomorrow' for the the appointment tomorrow.
I waited till midnight and it did roll over.
Or is this problem only via syncing from Outlook or something?
I have entered a few bogus meetings for the next day on the phone itself to test out your theory and on midnight the Tomorrow tag simply stayed there.
So once again I have no idea what triggers the bug.
Hi,
I just did a hard-reset on my phone, because gyrator (think) wasn't working properly and i hoped that a reset would fix this. However, i'm still having the same problem as before.
In TF3D everything works smooth, exactly how it should be working. The problem occurs when i'm in any application (typing sms or e-mail / browing with opera). As soon as i turn my phone to landscape modus, it turns the screen like it should, but after one second in landscape mode, the phone goes back to the TF3D interface. As a result, i'm not able to browse in landscape modus or type a sms/e-mail in landscape modus.
I think this has something to do with Gyrator (still all the standard settings after installation), since before the reset, the problem occured when i installed the program. However, it might also be another application.
I installed the following programs (i ignored the programs that i'm sure of that are not causing the problem, since i installed them for the first time and i had the problem before):
- G-Alarm
- Coreplayer
- Advanced Configuration Tool 3.2 (still standard settings)
- Massimo Colored Top Bar
- Microsoft .NET CF 3.5
- NoData
- Resco explorer
- Schap's advanced task manager
- Schap's registry editor
- tnyynt SD tuneUp
I tried the search function on the forum, but couldn't find a possible solution. Are there any people here that are familier with my problem?
Thanks!
I had the same issue. I isolated the issue to having 2 programs that handled rotation on some level.
I have exactly the same problem (tested with comics reader, opera...)
Yet I have uninstalled Gyrator... Could Gyrator have corrupted something? I suspect also the colored taskbar to be somehow responsible (as it had already corrupted my boot with another customised taskbar...)
EDIT: Problem Solved
I just uninstalled the last colored taskbar which had not the problem with corrupted boot, but which was the reason for this bug... problem solved for me
Damn, i loved the colored taskbar...is it still possible to have both (maybe a different way of installing the colored taskbar)?
t0k0m0k0 said:
I have exactly the same problem (tested with comics reader, opera...)
Yet I have uninstalled Gyrator... Could Gyrator have corrupted something? I suspect also the colored taskbar to be somehow responsible (as it had already corrupted my boot with another customised taskbar...)
EDIT: Problem Solved
I just uninstalled the last colored taskbar which had not the problem with corrupted boot, but which was the reason for this bug... problem solved for me
Click to expand...
Click to collapse
Interesting. I also have the colored icons taskbar. So far running only on program seems to work on my end. I will keep tabs on this. Thanks.
wpr said:
Interesting. I also have the colored icons taskbar. So far running only on program seems to work on my end. I will keep tabs on this. Thanks.
Click to expand...
Click to collapse
A more complete test would be necessary to really determine the problem... the good news is that everything is ok now for me
the bad news is no more colored taskbar until another try (next time I install a colored taskbar, I will try every known crash test )
There does seem to be a conflict with Opera and replacing the task bar icons, specifically the battery icon. Try installing Schaps Advanced Config and change the "Today -> Show on titlebar" from "Battery" to "Clock".
I was playing some more today. It does seem to be the colored task bar. I added the additional icons for Bluetooth. After that, the issue re-ocurred. A soft reset seemed to solve it and no issues since.
You should try the darklord colored titlebar, it does not cause these conflicts. Search the Blackstone forums for the link as I don't know it by heart and the original version is in Italian (the link in this forum is google translated).
Georgeous2008 said:
You should try the darklord colored titlebar, it does not cause these conflicts. Search the Blackstone forums for the link as I don't know it by heart and the original version is in Italian (the link in this forum is google translated).
Click to expand...
Click to collapse
This is the one I am using.
I also had darklord colored titlebar and had the same problem. When I switched to landscape it crashed into TF3D. Then I uninstalled titlebar and everything works right. For me the landscape view is more important then colored titlebar. You could try to install colored titlebar by the .dll file, not by .cab, but I don't think that will solve the problem. The best would be, if somebody who has colored titlebar and no crashing problem, would write how he did it.
Korbos said:
I also had darklord colored titlebar and had the same problem. When I switched to landscape it crashed into TF3D. Then I uninstalled titlebar and everything works right. For me the landscape view is more important then colored titlebar. You could try to install colored titlebar by the .dll file, not by .cab, but I don't think that will solve the problem. The best would be, if somebody who has colored titlebar and no crashing problem, would write how he did it.
Click to expand...
Click to collapse
For me it was the same but then with Massimo's colored topbar icons.
I've uninstalled it and now it works just fine.
If someone has the colored topbar icons and doesn't have the crashing problem, please post which one you're using.
I have still have the bar installed and have had no issues since the last soft reset. I was playing in Opera and You Tube with no issues.
I am going to install changescreen again and configure it. I will post results.
Jacne Blue-earth taskbar installed and everything looks ok until now
I have seen this bug since the initial days of the X1. Recently after upgrade to the R2 version the problem still exist.
I just have the following things installed in the phone:
Xperia tweaks
David Andrs Batti
Facebook panel
A_S S2U2
A_C S2V
HTC TOuchflo 3D HD Beta 2
Pubba TouchFLO 3D Panel
HTC Enlarge Start Menu
HTC HTC Volume
I always use the TF3D as my defaul panel. I simply love the interface.
The issue is when the phone comes in nothing happens when i press the ANSWER button. I can reject the call but cant answer it. I need to restart the phone and things are fine again.
I think the culprit is
S2U2 or TF3D.
P.S. In s2us i dont use the slide to answer fuction.
Someone else has similar issue.
Its really irritating.
I would blame TF3D because it's the only thing you seem to have on your phone which is known to cause problems.
S2U2 works fine here, but maybe you have something done wrong in the S2U2-settings.
Try setting everything off except:
- Lock when device wakes up
- Power Save mode
- Safe mode
- Display Mode: DirectDraw
Also be sure you have the latest version installed www.ac-s2.com
moleculez said:
I think the culprit is
S2U2 or TF3D.
Click to expand...
Click to collapse
Have you tried a hard reset and then not installed either (and possibly nothing else) for a few days to see if indeed it is a software issue and not a hardware fault?
it happens to me too
by any chance, do you have your phone in a pouch and then when you take it out, it switches to landscape mode from portrait and then you can press anything? thats what happens to me...
Actually I've experienced the same issue and I've posted in the Official S2U2 thread.
My thoughts is that S2U2 is the culprit, because I don't even have TF3D installed (nor ever did). I have been wrestling with trying to fix it for the past 3 hours, and I've come up with nothing!
I have seen this before and I think it is the way that the official WM caller ID tab works. It seems to always want to 'fight' another program for focus. S2U2 has a difficult time with the first call (also the first time the WM caller ID tab makes it's first appearance), but after a restart/reload of iLock2.exe, everything is fine for me.
This really sucks because I've had to resort to the default caller ID tab so that I don't miss anymore calls!
If you think thats a issue let me try setting up S2U2 to SLIDE TO ANWER option and see if it works for me.