Related
Hello all,
I'm a long time lurker, first post here though... Hope you can help me.
After SIM and CID Unlocking my device (o2 XDA Mini S) I updated to the newest IPL/SPL (3.08) and Radio ROM and installed the X-Plore 1.1 ROM. I got a strange problem now though, and don't know if it may be caused be a program or if this is a problem of the ROM of some sort... From time to time with no pattern, the display activates itself and shows the Today-Screen. 30 seconds later the background goes off again (as set in the device) and again 30 seconds later the devices locks itself again. Sometimes just a minute later the display goes on again, sometimes it takes some time, like an hour or two...
I already cleared my Today screen and "Startup" folder is also cleared... If you need anymore information, just let me know. Thanks in advance for any help
Is your device locked or unlocked when this happens?
The device is unlocked. I also tried a few things and maybe it's the spb Shell I've installed, but not sure... Does anyone know about such a problem caused by spb Shell?
I have the same problem with my t-mobile mda with ROM 2.26.10.2
There are many post to this problem.
Disable backlight switching off automaticly when your devise is locked with password.
Or disable password.
It is strange. But many got it by disableing backlight.
Just disable your password and set your backlight timeout and standby timeout to be the same.
Since those two little changes, I've not seen the problem again.
Thank you all, I'll try those two things and get back to you.
i have the same problem. i figured out though that the screen comes on when the phone sends/receives GSM data. i do have a password on the device also my screen doesnt auto lock how do i set that?
Hi. I recently noticed a hit on my battery life and noticed also that, as of late, my device will turn off the back light, but will not power down after the specified interval set forth on the power option in the Settings menu. I can still see the screen under a lamp. If I press the power button, it will go off. I'm figuring there is a registry setting that has gone awry, but I don't know where to check. I'm trying to re-establish my previous settings which got great standby times. I recently installed pRSS Reader, but switched the Today Plug-in from constantly rotating headlines to a non-cycling briefing of new feeds and unread feeds. I was wondering if anyone could help me isolate and fix this problem. Thanks.
I thought I had this problem licked recently, but unfortunately, it's back. I'm not certain what is actually causing the problem because I can't find an identifiable pattern that precipitates the inability to go to standby mode. The backlight isn't the problem so I'm figuring it's the power option. The power option isn't changed, it just won't work. It will start working normally again after a reset, but if I don't have a pattern, I won't know that it is happening until my battery life takes a rapid hit.
Thanks for any thoughts / help.
Curious D said:
I recently installed pRSS Reader, but switched the Today Plug-in from constantly rotating headlines to a non-cycling briefing of new feeds and unread feeds. I was wondering if anyone could help me isolate and fix this problem. Thanks.
Click to expand...
Click to collapse
Seems like your phone can't go to standby because of it is actually heavvy working with loading and showing feeds on the today screen.
If it is not too much work: uninstall the plugin(s), restart the device and see if that solves the problem.
Hi,
Has anyone noticed that the Diamond2 always returns to the home screen after comming out of lock mode or standby?
For example, i could be listening to music, after 5 mins of me not using the screen, the phone would lock. On entering the PIN, the TouchFlo retuns to the home screen, instead of my music app. Same goes for any other app on the TouchFlo. My previous Touch Pro came back to the last opened app on TouchFlo.
Not a huge problem but would be good if there was a tweak to stop this behaviour.
M
mgumbs said:
Hi,
Has anyone noticed that the Diamond2 always returns to the home screen after comming out of lock mode or standby?
For example, i could be listening to music, after 5 mins of me not using the screen, the phone would lock. On entering the PIN, the TouchFlo retuns to the home screen, instead of my music app. Same goes for any other app on the TouchFlo. My previous Touch Pro came back to the last opened app on TouchFlo.
Not a huge problem but would be good if there was a tweak to stop this behaviour.
M
Click to expand...
Click to collapse
I dont think that the people here see it as a problem like you and myself I started a thread weeks ago
http://forum.xda-developers.com/showthread.php?t=507358
1300 views but still no solution, its prob too hard to do Dammm HTC
Martyn
Ps if you find a solution please let me know
I also experienced a problem with switching screens when turning the device back on. Uninstalling TouchLockPro solved the problem for me...
@Brempie
I took your comment about uninstalling TouchLockPro. I didnt have that program installed but i took the PIN lock off my phone temporarily, and hey presto, phone works as it should!
So now we know what causes the problem, hopefully HTC will have a fix for it....eventually.
I'll live with the bug for the moment, i prefer a phone which is PIN locked.
Cheers,
M
I have never had this happen to me. I also installed throttle lock and it always goes back to where it was when I unlock. I just uninstalled throttle lock and did a soft reset to test and make sure it never reverted back to the home screen. Nothing.
No matter what program I am in it wakes up to that same spot. I don't know what the registry hack for this is but there probably is one.
Could you possibly try this? Install ThrotleLock v0.6 and then see if it will work. If it wakes back up to the same screen and not TF3D uninstall it and see if it goes back to TF3D or not.
*warming up this thread*
So, has anyone yet found a solution for this?
It's annoying for me as i have set the device to go to standby after 2 minutes of inactivity when on battery. When i listen to music with the musicplayer in foreground, or when i write an email and someone interrupts me, i put the device in standby by myself or it does automatically after the defined time.
In 95-99%, when i turn back on the device, it has returned back to the touchflo home screen. Very rarely, and it could not yet find any system, the device wakes up exactly where i left it. This is, what it should do everytime but sadly it doesn't.
I'm using the Stock-ROM, activated PIN-Lock of my SIM, having a (WinMobile default) device Lock (4-digits) set to activate after 24 hours (this way it does not activate itself during normal usage, unless i long-press the end-call-button), using 2ndToday with SPB Diary.
It gets more annoying for me every day, because especially during working time i frequently turn the device on and off. Reading RSS-news, turning the device off for an incoming call, turning the device on just to get welcomed by the home-screen instead of staying on the news i previously read isn't that comfortable
Having to open the taskmanager and reactivating the program means at least two more clicks everytime i use the device... so - any solution?
edit: I think i tracked down the source of the problem, watch in this thread:
http://forum.xda-developers.com/showpost.php?p=4366357&postcount=14
Hello! I'm new but I have a big problem. In the enening when I go to bed I often turn off my Experia so I'm not interrupted at night and I can save my baterry. But the problem is that alarm in the morning doesn't want to ring and doesn't want to turn Xperia on back. I found recently the page on the web where somenoe said that it needs to be doen some hidden tweaks so that the WM doesn't try to look how full the baterry is before it sturts up. I can't find that page on the web again so can someone help me with this settings?
Than you.
use flight mode.
x1 cant wake up when off
I don't think any Windows Mobile phone is capable of waking itself up when it's powered down.
you probably use just as much power turning the phone on as you would have used leaving it in stand by..... just sayin'
OK, so I have tried flight mode and it works but anyway does anyone know the hidden settings to change verifiing battery from wm before it turns on again?
Oh, and another problem on my Xperia. I noticed that when I don't use it the screen (backlight) aproximetely every once in 2 minutes turns on again (my power settings are: turn backlight off after 30 sec, standby mode after 1 minute). I think that why battery last only 3 days. Can anyone know how to fix this problem? Thanks.
donci3 said:
OK, so I have tried flight mode and it works but anyway does anyone know the hidden settings to change verifiing battery from wm before it turns on again?
Oh, and another problem on my Xperia. I noticed that when I don't use it the screen (backlight) aproximetely every once in 2 minutes turns on again (my power settings are: turn backlight off after 30 sec, standby mode after 1 minute). I think that why battery last only 3 days. Can anyone know how to fix this problem? Thanks.
Click to expand...
Click to collapse
Change your configuration : Settings / system/ ilumination (check here the items you have enable or disable "enable ilumination".
Well basically, your device is off when you turn turn off the screen.
Not quite. You can always leave a lot of applications running with the screen off.
So what kind of setting to save as much as it can for battery or what kind of app du you recomend?
First, as someone already said, a WM device can not turn itself on when powered down.
To conserve battery... well just make sure no CPU intensive apps are running in the background, wifi, BT, data connection are off and use auto backlight setting.
Most smartphones don't turn themselves on for alarm (WM, UIQ Symbian, S60 Symbians), but i can't tell for all (iPhone does as i've heard, no idea about Android).
PDA is not Mobile Phone.
It has operation system etc.
To run PDA you need about 1 minute for loading all components of OS.
To run Mobile Phone Alarm needs no load components of OS, just display and sound.
In PDA sound can be played with help of driver and so on.
In Mobile Phone just tiny assembler program and clock-chip.
I know my alarm worked before with Touch-It rom. But since I flashed with WM6.5 and my alarm doesn't go off when the screen is off. There's no way around this?
I can't trust the alarm at all, it sometimes works, sometimes doesn't. Same on stock rom and 6.5. G-alarm is much better though..
Are you talking about turning the phone off completely,or turning off to the standby stage ? If you use the standby stage, it works fine, and hardly uses any power in this mode.
Hi,
I've searched for several hours now in these forums and on Google, with no success.
I need an app that leaves the device switched on, but powers off the screen.
In settings/power I can dim the screen, but there is no setting to dim it completely or just switch it off.
I've found screensavers that can show a blank screen, but the screen is still actually powered up, just showing a black image presumably.
I've found apps that can switch off the screen. But you have to manually click on them to switch off the screen.
Does anyone know of a screensaver that after a set interval will leave the device running, but power off the screen please?
Suspend is no good, the device must be up and running apps.
Thanks for your help.
ClearOutLoft said:
Hi,
I've searched for several hours now in these forums and on Google, with no success.
I need an app that leaves the device switched on, but powers off the screen.
In settings/power I can dim the screen, but there is no setting to dim it completely or just switch it off.
I've found screensavers that can show a blank screen, but the screen is still actually powered up, just showing a black image presumably.
I've found apps that can switch off the screen. But you have to manually click on them to switch off the screen.
Does anyone know of a screensaver that after a set interval will leave the device running, but power off the screen please?
Suspend is no good, the device must be up and running apps.
Thanks for your help.
Click to expand...
Click to collapse
What apps are you trying to "keep running"? The only thing that might be an issue when the screen goes into it's normal sleep mode is that audio will stop outputting, and wifi connections will suspend, but there's cabs available here to easily get around both of those (and keep them going even when the screen shuts off).
Well, it's actually to solve another long-running problem that has made me almost lose the will to live....
Alarms don't go off reliably on my TP2.
Sometimes, randomly, the alarm doesn't go off until I press the power button to wake it up. The the alarm instantly goes off. So, if I set an alarm for 6am, sometimes the phone wakes up and the alarm sounds, sometimes not. And if I switch the phone on manually sometime later, at 6:15 say, the 6am alarm sounds then.
It will work fine for a few days, then fail.
It happened on WM6.1 and still continues after upgrading to WM6.5.
I have spent countless hours googling and searching XDA-Dev. I have tried probably ten different alarm apps, with no luck. I have hard-reset various times. I have tried various recommended registry tweaks. I've tried checking the notification queue regularly for any errors. I've tried so many different suggestions, for example, never pressing the power button to turn the phone off, only ever let it hibernate automatically. Warm-resetting it each day. And the list goes on.
So, I'm experimenting with just leaving the phone on forever. But turning the screen off at night to save power / not shorten the life of the screen hardware.
Which leads me to the question about screensavers which actually power off the screen automatically after a set delay. Just like a normal screensaver on a PC.
It's hard to easily convey the frustration I have for the TP2. An excellent phone. But a phone which I can't trust to do the simplest thing: to wake me up in the morning?
It'll end up in the bin at some point very soon now.....
A suggestion
Hi,
In my opinion there must be an application, change or customisation that is leading you to those problems. My suggestion is, to perform a sync towards any computer or server to keep your contacts, then, hard reset and keep the phone with the factory defaults for a while. Then, test the phone's alarms and if all is okay, add one by one your applications and changes, testing the alarms in between. Please do that on the official ROM (whatever 6.5 or 6.1) but official one. You will flash if needed later on.
I know it will be a pain, but you will find the problem.
I am using a TP2 with stock WM6.5 ROM. I have not had yet any issue with the alarms. However, I remember to have had those kind of problems before with WM 5.0 and 6.1. There were always related to freeware applications, customisations, no official ROMs, registry hacks and restored backups done from older builds upon upgrade. The alarm bug in old WM version was also known, but I have not experienced it on newer versions.
There can be some issues with the notification database by times, but as said above, it is almost every time due to customisations.
I am not saying that we should keep our phones without applications, third party software, cooked ROMs, customisation etc. But the goal is to find out what is the reason, and believe me. It is the best if not only way.
If you post the list of applications and hacks that you have in your phone, I can try to see if there is any I could identify like guilty one, based on my own experience.
Complementary, I recommend you to install and use these two applications in attachment. They have worked for me on WM5, 6, 6.1 and 6.5 so far. They are freeware and therefore you can use them without problems.
Good luck!
Thanks for taking the time to reply. All very good advice. I'll have a go when I've got some free time again. In the meantime, has anyone come across a screensaver that actually powers off the screen please?
Thanks again.
ClearOutLoft said:
Well, it's actually to solve another long-running problem that has made me almost lose the will to live....
Alarms don't go off reliably on my TP2.
Sometimes, randomly, the alarm doesn't go off until I press the power button to wake it up. The the alarm instantly goes off. So, if I set an alarm for 6am, sometimes the phone wakes up and the alarm sounds, sometimes not. And if I switch the phone on manually sometime later, at 6:15 say, the 6am alarm sounds then.
It will work fine for a few days, then fail.
It happened on WM6.1 and still continues after upgrading to WM6.5.
I have spent countless hours googling and searching XDA-Dev. I have tried probably ten different alarm apps, with no luck. I have hard-reset various times. I have tried various recommended registry tweaks. I've tried checking the notification queue regularly for any errors. I've tried so many different suggestions, for example, never pressing the power button to turn the phone off, only ever let it hibernate automatically. Warm-resetting it each day. And the list goes on.
So, I'm experimenting with just leaving the phone on forever. But turning the screen off at night to save power / not shorten the life of the screen hardware.
Which leads me to the question about screensavers which actually power off the screen automatically after a set delay. Just like a normal screensaver on a PC.
It's hard to easily convey the frustration I have for the TP2. An excellent phone. But a phone which I can't trust to do the simplest thing: to wake me up in the morning?
It'll end up in the bin at some point very soon now.....
Click to expand...
Click to collapse
do you turn your ringer to silent or vibrate when you go to bed? if so,
go to start/settings/clocks&alarms/more and make sure that the "sound alarms box" is checked. this will make sure that even if your phone ringers/alerts are off, your alarm will ring. also, if you charge your phone while you sleep, go to the backlight settings and uncheck the "turn screen off on ac power" box. if you cant sleep with the phone light on, set it to max dim on ac power and flip it over. i always had this issue when i had the tmobile wing.
ClearOutLoft said:
Hi,
I've searched for several hours now in these forums and on Google, with no success.
I need an app that leaves the device switched on, but powers off the screen.
In settings/power I can dim the screen, but there is no setting to dim it completely or just switch it off.
I've found screensavers that can show a blank screen, but the screen is still actually powered up, just showing a black image presumably.
I've found apps that can switch off the screen. But you have to manually click on them to switch off the screen.
Does anyone know of a screensaver that after a set interval will leave the device running, but power off the screen please?
Suspend is no good, the device must be up and running apps.
Thanks for your help.
Click to expand...
Click to collapse
S2U2 on this forum.
try g alarm.it worked perfect for me with tilt
I have similar Issues with my TP2;
I notice that it is more to do with HIBERNATING than screen off.
My TP2 has go to the point where allowing it to go to hibernation means Screen of Death.
Overnight I charge it and do not let the screen go off and it seems ok (so far).
Guess I will have to Hard reset and test my freeware.
Cheers
G
I had the exact same problem. When the phone goes to sleep, it is ASLEEP. I didn't use the alarm too much but the phone would never notify me when SMS arrived. I'd hit the power switch to check, and bam, three messages arrive at once, some from hours ago. Immensely frustrating, but the problem went away when I installed Energy rom.