When trying to flash rom my activesync shuts down and i get a error 260, I have to reboot pc to try again,thought it might be pc problem but installed activesync 4.5 on another and tried that - same thing???
Any ideas?
Can't seem to get into bootloader either regardless of keypress sequences.
You're running Windows Vista aren't you?
Simplest solution is to get access to an XP machine and try with that. Problem Solved.
No, I'm not running vista - thankfully and neither was the other machine that I tried it on.
Related
Help, my Atom Life is stuck in the upgrade screen and won't turn off or anything unless I do the procedure for HARDreset.
It then still returns to that screen it shows while upgrading.
What do I do?
HELP!
rebeltrousers said:
Help, my Atom Life is stuck in the upgrade screen and won't turn off or anything unless I do the procedure for HARDreset.
It then still returns to that screen it shows while upgrading.
What do I do?
HELP!
Click to expand...
Click to collapse
did u disconnect the USB?
try on bootload mode. remove u,r mini-SD pres rec+volume+restart now it will enter boot load mode, try again update.......
Nope, just thought that running an update designed for compatability with vista would work!!!! (WM6)
Did the whote thing again on another XP computer and it worked fine! No problems!
Thanks heaps!
rebeltrousers said:
Nope, just thought that running an update designed for compatability with vista would work!!!! (WM6)
Did the whote thing again on another XP computer and it worked fine! No problems!
Thanks heaps!
Click to expand...
Click to collapse
BTW, I did the upgrade on a XP session in a VMware workstation 6 virtual session under Vista x64 and it even worked fine.....
Yeah I did mine on a vista laptop. LUCKY!!!!
Hmmm actually it doesn't seem to let me connect to my wireless modem at home anymore. What settings do I need to change?
All I use the wifi modem for here is the internet on my PDA and laptop. It is unsecured and always shows up but I can't get anything in the browser or get a ping to work. The self diagnostic works fine too, and everything worked fine before I upgraded the ROM.
Any help?
Fixed! YAYYY!
Any solutions? my computer will recognize at first but then it says not connected and wont let me acess the files on my wing. Im using Windows Vista btw.
Can somebody help me with this problem?
I am using vista also.. try soft reseting it.
I tried soft resetting it and hard resetting it and it still doesn't work. Now I'm contemplating ever getting Touch It 2.3
Try going in settings->connections->usb to pc and either check it if its not checked or uncheck it if it is checked
Mine did this too last week. Reflash your phone with the official Tmobile RUU posted in the forum.
My steps were:
-Go into bootloader mannually (camera button plus voice command button and finally with those two press, click in the hole (between memory and volume key) with your styles)
-After it seems that pc loaded up some kind of driver, double click on the official Tmobile RUU and flash your phone to stock form.
this should work and goodluck...
I've connected my Wing on my friend's computer and it's recognized by his ActiveSync but its Windows XP he's using. Is there any way i can reinstall or change some settings on my computer so that it can recognize my Wing again? I really prefer the windows xp activesync over the windows vista version but theres no way of getting the old activesync on vista.
Finally!! I fixed the problem! I had to install version 6.1 from microsoft's website, and everything is good now. thanks for the help everybody.
do you have the link to that update im having the same problem
nm i got it, thanks for the solution though
Well... I've been without a phone for close to 3 weeks now (because the phone is bricked) and have been reading and reading and reading..
anyway.. the point being is I think i have came close (I've tried the SD method and it hasn't worked) is there any way at all, to be able to connect the phone on activesync, even when bricked, because thats the only way i can flash the rom!!
respond please!
Not sure what exactly your specific issue is but, having just recovered my, Hermes from "Brick-Hell". I'll try to help.
First, do you have access to an XP machine and AS4.5? This would make things easier... if not have you read MrVanx's guide to syncing on Vista?
But try this anyway:
In WMDC de-select connect via USB (or whatever it says, I forget as I dumped Vista for Linux).
Remove the battery from your device for several minutes. In the meantime reboot your Vista machine. When it comes back up, make sure allowing USB connections is still un-checked.
Go here and download the T-Mobile ROM (2nd Link) to your desktop.
Return the battery to your phone and connect via USB cable. Then run the T-Mobile ROM app from your desktop. If it doesn't work, at first, keep trying until you get by the "Erasing" part. The ROM update will eventually return an error but after that you should be able to flash any ROM to your phone. But first I would Hard SSPL upgrade.
I just did this under XP (in a virtual machine, no less) and it worked like a charm.
Good luck.
Hi I am running Open Touch 7.7 by ttran on my t-mobile wing.
Unfortunately, whenever I connect the phone to my PC via usb all I hear is a the usb connection sound twice and the device is not picked up at all(I cannot access it in My Computer).
I have tried multiple usb cables and used a computer running Windows XP and a computer running Windows 7 (beta). My phone used to connect just fine, which is how i got open touch onto it, but now i can't seem to get it connect to my PC at all. I tried hard-resetting my phone but it did not help.
Any suggestions on how to fix this problem?
reflash
I had the same problem too with this ROM. The only way I could get a connection again was to reflash the ROM. This happened a couple times before I gave up on it and installed a pdaviet rom. Now, I'm currently using (16.03.09) - Herald 6.1 Rom -5.2.20757.1400 which is running very well.
Good luck.
try logging off or restarting computer. For some reason if I can't connect with this rom, that works every time
hey i know how to flash a ROM with my sd card (thanks to ivan's guide) but i dont know how to Hard Spl without pc connection which is needed to flash a rom with a micro sd!
EDIT!: I got my device to connect to the pc. I simply went to Settings-->System--->USB to PC and enabled it. Then when I connected my device i had to run some drivers searches through windows and finally it recognized my wing as a winmo 6.1 device.
My HTC Touch Diamond2 never stays connected to my Windows 7 PC for long.
Therefore its not syncing everything.
If I go into Sync Center the status of the device is Disconnected.
To fix this problem I have to go into Device manager, Uninstall the Microsoft Windows Mobile Remote Adapter, unplug the phone from USB, plug the phone back into USB and Windows recognises the phone and reinstalls the driver.
But later in the day it will disconnect and I have to go through the reinstall process again.
Its really annoying.
How can I permanately fix this?
Try a Hard-Reset. It worked for me to. Or try to reinstall Windows mobile device center.
if that does not work, try to update hard-spl to 2.51 (if your device is already rooted). that helped me out, maybe it will help you, too.
wavesshock said:
Try a Hard-Reset. It worked for me to. Or try to reinstall Windows mobile device center.
if that does not work, try to update hard-spl to 2.51 (if your device is already rooted). that helped me out, maybe it will help you, too.
Click to expand...
Click to collapse
Thanks for the reply.
I have not done a hard reset but I updated the ROM, last week, to the latest that HTC have published.
It did not fix the problem.
I also reinstalled the Mobile Device Center and it didn't fix it.
I have now created a script to reinstall the driver for me. So I just double-click it on my PC and its automatic. Still annoying but now less so!
had same problem but Hard-Reset helped me
you can try do that in another pc ?
I have the same problem.... and I can't try do that in another pc.... what have I to do?
Is it a firewall problem?