Hello guys,
I own my Jade since December. It's the best phone I've ever had. But it occured one problem. From one day to another my Keyboard has changed to the default windows mobile Keyboard. Is there any chance to restore the other Keyboard. The settings in Start-Setings-Personal-Keyboard didn't help.
Thanks in advance for any help.
Greetings from Germany
when youre in your sms / text message menu, you see the keyboard icon in the middle below. Next to it to the right there's a small triangle-arrow, tap it and you get the options for which input mode you want to use.
i download the PDAMEDIA KBD which shows a much bigger rotated keyboard. you might try that as well.
hope this helps.
greets
Thanks a lot. It worked
Related
I have this perfect model, but one big problem with t9 entering text. I need disable this funkcion for ever. Can somebody advice?
Hey, I am having the same issue. It always tries to predict / complete my words but it never does it correctly. I have changed it to stop doing it in both the Touch Keyboard settings and the input settings.
Any guidance would be helpful.
This will disable T9 but...
HKLM\SOFTWARE\Tegic\eT9\ and change the key "XT9SupportMSSip" from value "1" to "0".
... I did this as well as disabling the HTC built in keyboards via SKTools. I also installed 'PCMKeyboard' and 'IM selector' (To set PCM as the default).
In doing all of this, now on reset, one of the HTC keyboards still looks like it's default and I do not get predictive text anymore. Meaning that if I start a new email or sms, enter a letter in the 'To:' field, it wont suggest a contact.
I really haven't poked around as to what is going on so I'm living with it because I like the PCM keyboard to much.
Any help would be great. Thanks!
Your registry advice is not working on my device.
I obtained this reg suggestion through a thread in the 'elf' forum. I needed to use it to enable 'PCMkeyboard'. Sorry, I can no longer find the thread I was reading. You may want try and search for some clues there.
try this
try this
i think it will fix the problem
Hi GUys
The cab file works fine so well done.....
However if you are looking to use your keypad to msg[without T9] it wont work as the file disabled the use of letters, only numbers now work
Any chance that T9 can be turned off and still be able to use keypad to msg as normal.........
Thanks
Has there been any progress on this???
I'm tired of typing using the keyboard, along with the touchscreen and suggestions being made, then if i'm not looking, i press space and it adds the damned suggestion onto what i've typed (for instance: twotoo / memean)
Very annoying when trying to type a text quickly and sneakily in work, as i've got to focus on the text and not who's around me!
If it can be switched off, I would highly appreciate it, I can't find it in the Advanced Config Tool, or under any of the settings.
Thank you,
Hate to do this, but any ideas anyone???
Thank you,
Hi all,
I'm having a problem with the HTC SIPs (Full Qwerty and Compact Qwerty) - they're both stuck on numeric input and won't switch back to text input mode.
ie, I click on the "ABC" button and nothing happens. I therefore can't enter anything other than numbers and symbols!
Has anyone else seen this issue? I'm having to use PCM Keyboard in the meantime, which is frustrating as it doesn't have easy access to "." etc.
Thanks
J
PCM Keyboard prevents the HTC SIPs from working properly. Either remove PCK Keyboard or try the latest version (0.19)
I have the same problem
I have the same problem.
I haven't installed any additional keyboard software, and suddenly my text keyboard is stuck on numerics.
I have a feeling this may have been something to do with the latest firmware from HTC that I've recently installed.
Anyone got any ideas?
Thanks in advance
Pete
Petee said:
I have the same problem.
I haven't installed any additional keyboard software, and suddenly my text keyboard is stuck on numerics.
I have a feeling this may have been something to do with the latest firmware from HTC that I've recently installed.
Anyone got any ideas?
Thanks in advance
Pete
Click to expand...
Click to collapse
Do you have HD Tweak installed?
this will happen if you enable T9
Sorted
Yep, that was it
Sorted - Thankyouverymuchsir
okay so I too now have this same problem, originally I had Dutty's Leo R6 on my phone with HDTweak so I decided to reflash my phone with Dutty's Leo R7 and this time not install HDTweak and see if it works.... But even after doing that, I still keep getting all 3 types of the keyboard inputs stuck on numbers and symbols. after a soft reset whenever I try and type in a text, the first time it usually works fine. But after I have sent the 1st message or just returned to the home tab and try to write another msg, all input keyboards are stuck. Note: I can temporarily fix it by clicking on a previous message, waiting for the menu to popup from the threaded view and then closing it, but after writing that message it will revert back to being stuck
So no HDTweak installed, using new HTC Messaging App, have turned off T9 Autocompletion + Symbol Lock under Input Options and I have also tried installing geniusgeng's cab here: http://forum.xda-developers.com/showthread.php?t=486187&highlight=[solution]+qwerty+keyboard but that doesn't work...any thoughts on how I can fix this with something more permanent?
Thanks
Not sure of any reg tweaks, but why don't you install HD Tweak and then disable T9
Hey, thanks for the amazingly fast reply!!!
okay so I just tried reinstalling HDTweak again and disabling T9, but its still not working I keep having the same trouble. I have also tried all different combinations of disabling T9 only in HDTweak, or both HDTweak and under Input Options and only in Input Options and so on.... but the problem doesn't seem to get resolved.
I have experimented some more and it turns out that the keyboard will only get stuck when I go to the messages tab and click on a text I received to reply to it. If i go to the messages tab and create a new message (where I have to enter in the contact and can't see the threaded msgs) then the keyboard is fine all the time. Does anyone else have this same problem as well, or is it just me?
I would really prefer to be able to quickly reply to texts instead of creating new messages every time...gonna try disabling the htc messaging app (was going to anyway cause it takes waaaay too loooong lol) and see if that magically works
Thanks again!
I had a similar problem and fixed it
I logged on here to see if someone could tell me how to fix my issue, but it is regarding an HTC HD2, not a Blackberry. My problem was similar but not exactly the same. My phone somehow permanently got stuck on Xt9, which I hate and am worthless at using. I couldn't seem to find the answer anywhere online so i'm writing my experience here in case it helps anyone.
Hitting the XT9 / ABC button did NOTHING to fix it. Even though the button would visually change from XT9 to ABC and back, when I hit it (it would change to a green color), the keys themselves would not change at all, and i was stuck looking at keys that make zero sense to me qw... er...ty... ui.... it was like a bad nightmare. I have no idea how I managed to get it stuck on this (sorry I know most of you techies probably have no problem with it but I am just not very tech savvy).
I tried taking out my battery, popping the sim card in and out several times, restarting. Sounds stupid but I didn't know what else to do as I couldn't find any solutions online. Finally called tmobile.
First the rep told me to try going to Settings > Locale and Text > Text Input. She asked what my settings were on, I said ABC. She told me to turn it to XT9 instead, then close out the screen, go back, then switch back to ABC. I did that, and no dice. I figured either the settings are frozen or I'm cursed.
Then she had me go to the screen to write a text msg. When your cursor is in the text box to write in, you will see a little keyboard icon at the bottom of the screen. There's a little arrow next to it. Click on that arrow. That brought up the options of Full QWERTY and Compact QWERTY, and apparently somehow my phone got switched to Compact QWERTY. So I switched back, and that fixed it.
So yeah, apparently there are a couple of different ways to change it.
I wanted to hug this woman through the phone, i was so relieved to be able to text again (I could not write out one single word while on Compact QWERTY). I'm not sure if going this route can help anyone else but it was the answer for me. There may be other options for you when you click on the arrow next to the keyboard.
Good luck!
Hi!
I received a Touch HD few days ago and from the first time I noticed that something doesn’t works properly.
Initially the keyboard by default was the QWERTY one. I changed it to probe the compact one. I did the change with no problems (obviously was not a difficult issue). Well not so obviously because the problem was when I tried to return to full QWERTY keyboard.
I selected the fullQWERTY in the configuration menu, I pushed the OK button but when I tried to write a new message the compact keyboard was still there. I tried to change to any other keyboard but the result was the same. I haven’t installed any keyboard so is not a software incompatibility issue.
I reset the phone, check for rom updates, etc but I cannot select QWERTY keyboard. I have search about this but the only information I found is a post in this forum with no answer.
Please, any information about a possible solution will be greatly appreciated. Just imagine a wonderful HD without its QWERTY keyboard…
Thank you very much.
I have the same issue. A full reset did fix it but then it randomly happened again. Obviously that's not ideal!
Any ideas anyone?
Might it be worth an email to htc?
You checked for ROM updates using? I'm sure there is some registry key but not really certain.
Regards,
Carty..
I have encounter the same issue. I have found out that if you go through setting and select keyboard to change..it will not work...
It seems that touchflo took over the registry.....
Now the correct way to change your keyboard is to
1. press your keypad up.
2. you should see this little arrow beside the your keypad icon
3. when you tap the arrow you will see this menu pop up to pick the keyboard layout.
This is the ONLY WAY to change the keypad
Hope this helps
JuanQ said:
Hi!
I received a Touch HD few days ago and from the first time I noticed that something doesn’t works properly.
Initially the keyboard by default was the QWERTY one. I changed it to probe the compact one. I did the change with no problems (obviously was not a difficult issue). Well not so obviously because the problem was when I tried to return to full QWERTY keyboard.
I selected the fullQWERTY in the configuration menu, I pushed the OK button but when I tried to write a new message the compact keyboard was still there. I tried to change to any other keyboard but the result was the same. I haven’t installed any keyboard so is not a software incompatibility issue.
I reset the phone, check for rom updates, etc but I cannot select QWERTY keyboard. I have search about this but the only information I found is a post in this forum with no answer.
Please, any information about a possible solution will be greatly appreciated. Just imagine a wonderful HD without its QWERTY keyboard…
Thank you very much.
Click to expand...
Click to collapse
When I want to use the keyboard and have the Full QUERTY keyboard selected, it's in numeric mode. When I tap ABC to get to the alfanumeric mode nothing happens. What is the solution?
Axum
Did you try tapping on the right side of the keyboard button so you can choose which keyboard you want to use?
Right hand side there is a abc button, is it not there?
yes, I tried that, both full or compact QWERTY is not working when I select them and then tap ABC. When I select the standard Windows Mobile keyboard, then I get a Qwerty keyboard that I can use.
I had this problem earlier on the same phone (but I did a hard reset then) and now the problem is back.
The problem started when I selected 123 for the first time in the Full Qwerty mode.
Axum
Anything installed before the problems started?
I've had this problem before as well. Do you have any other SIP's installed?
I have the same problem, except mine also does it with the
123
456
789
Caps0Symbol
keyboard. Yes, a horrid explanation, but I have no clue what the English word for it is, since I'm running Danish OS.
go here for a few fixes
http://forum.ppcgeeks.com/showthread.php?p=617541
http://forum.ppcgeeks.com/showthread.php?p=507768
same happened to me today, and it came back after doing the regedit fix
i found that the change to T9 mode in advance config or HDtweak was what was causing it to come back
have now disabled all the T9 options throughout and seems to have stayed put
How do I completely remove t9 from full qwerty? I dont even want to see the little bar that appears when I begin to type.
Thanks
CorruptedSanity said:
How do I completely remove t9 from full qwerty? I dont even want to see the little bar that appears when I begin to type.
Thanks
Click to expand...
Click to collapse
Go to touch input settings and uncheck everything.
I did, I no longer get suggestions but the knob or switch is on T9 by default when I begin to type and I get the bar above that duplicates whats being typed (in an sms for example).
CorruptedSanity said:
I did, I no longer get suggestions but the knob or switch is on T9 by default when I begin to type and I get the bar above that duplicates whats being typed (in an sms for example).
Click to expand...
Click to collapse
Hmm strange sorry man I got nothin. Maybe disable supportmssip in hklm/software/tegic/et9 ?
Ok I noticed that its on ABC not t9 when I attempt to enter text on tasks for note for example, but text entry in sms is set to t9 by default. Weird, shoulndt it be consistent between applications.
Hi all.
Is there a way to disable XT9 text input on the mini? I've tried all sorts of stuff but the bar with the suggestion words keep coming up. I would like to use the plain ABC input instead of always having to correct my text entries, especially given that I use loads of technical words and the dictionary keeps wanting to correct them...
Thanks for you help!
look at settings - region and text (10) - text input (2)- text input options (3) and here turn everything off.
i have not an english version and do not know the exact namings, therfore the numbers. hope it helps.
thanks
thanks. phone's not with me right now. will try when I get home...
Wonderful! Just thought that there were some settings on the keyboard itself that would allow for the T9 disabling but was wrong! Can now do everything that I want, thanks!
Hi,
I have the Dutch version but when I go to country settings -> region, I only can select a country.
I don't see the text options.
Same problem, I'd like to switch it off.
Any help is appreciated!
Regards:
Daan
no no no. Actually as birgit123 said it, it's not the "region" in the Start-Settings. You'll be able to access the "region and text" on the last tab at the bottom, going all the way to the right where you see Personalize as the first option. Scroll through there and you'll find what birgit123 said.
Hi, it sounds so simple and I'm a user of the Touch Diamond 2 for over a year now, completely knowing how to use and configure it but my wife got the HD Mini now and it's different.
Here some screens comparing my Diamond 2 with the HD Mini. As you can see I can switch off XT9 at the Diamond 2 but proceeding exaclty the same way on the Mini, I don't see the region and text option????
Can anybody help me out here, maybe a screenshot of a HD Mini for dummies (because that's how I feel now )
Once again, thanks for all the help!
regards: Daan