Database Users

Where does this keyboard come from?

I have the 16 key touch dual.
So on input options, you have the touch keypad, when I select that sometimes this comes out (please see attached)
I like it thought better than the 20 key touch keyboard.

Yeh... Where?
I second this, it works really well but there is no option to bring it up on the dual... it just randomly appears sometimes when you need to input text.

Thirded.
And whats more, why does text input seem to vary on web pages?
I've got some where it defaults to numeric input when it should be alpha numeric (ie. passwords), others where XT9 seems to be off (the subject on mails in facebook).
Its so stupidly all over the place and inconsistent! If I could just get this one to pop up all the time I'd be happy.

Doesn't that keyboard show when there's no text entry field?
And yes, i want it too, why would they disable it for normal usage?

Yeh I have found the keyboard to be all over the place when it comes to deciding if it will give you tx9, abc, 123, etc.... Anyone know a way to set one of the two alphanumerics as a default at least?

ok ive had this appear a few times now but couldnt figure out why, as you have been asking for it i have been playing around and think i know what is causing it. you may not need everything listed below but these are the settings on my device if you play around with them you should be able to narrow it down.
I'm running Toms rom, found here
i have disabled threaded sms by using the second setting here
i have enabled the favourite people button on the htc home screen by deleteing the key here
the only other app i have that may have changed a setting is the HTC home customiser.
After making these changes tick the enable xt9 setting in romsettings app, exit the app, then go back into it and untick the enable t9 setting, after closing romsettings you should have the keyboard shown in the second screen shot
as far as i can see this changes the keyboard in all applications

Thats great! Still albeit of a noob so you lost me somewhere there, is there a way to this on the stock ROM?

short answer is i dont know. try looking for an applcation called rom settings after installing it there is a t9 setting. untick it and closethe application if this makes no dfference you may want to try altering the other settings and then trying again until it works.

kerrance76 said:
short answer is i dont know. try looking for an applcation called rom settings after installing it there is a t9 setting. untick it and closethe application if this makes no dfference you may want to try altering the other settings and then trying again until it works.
Click to expand...
Click to collapse
Ok will try that thanks. On the side, when you untick "T9" does this make "abc" default text entry as well?

I have confirmed that this keyboard layout come out when no text entry is needed.

muzikfreakah said:
On the side, when you untick "T9" does this make "abc" default text entry as well?
Click to expand...
Click to collapse
I wish, this has been a problem since the phones release - theres 7 pages on it here

muzikfreakah said:
I have confirmed that this keyboard layout come out when no text entry is needed.
Click to expand...
Click to collapse
thats the default action anyway, with the changes detailed the keyboard is available when entering text, if you look at the second image you will see that the cursor is actually in the message box, its the black line at the end of the word hello

muzikfreakah said:
I have confirmed that this keyboard layout come out when no text entry is needed.
Click to expand...
Click to collapse
Eh? Maybe I overdosed on the thick pills last night, but that doesn't make any sense? If I click on a password field in IE, sometimes the main phone keypad always seems to default to numeric entry. But clicking in the field itself pops up this lovely keyboard.
It really does make no sense at all. There doesn't appear to be any standard/global keyboard settings.
And this is in v6 of WinMo, you would have thought they would have got the basics right by now, but the darned sent items has the useless option of "order by from" - when all the sent items are sent from the same person.
Its got plenty of potential, but it just seems like lots of separate teams were implementing it, doing their own thing without any centralised discussion/design.

Has anyone managed to get this to work with the standard T-Mobile [UK] ROM ?

any updates on this as well? it would be nice to just get an option for this

I got it to work, rather by chance, but thing is after that, I could switch to back to the touchpad type anymore.
I installed POCKETCM KEYBOARD. After doing that, somehow it locked this keyboard in when I choose touchpad.
Its rather a workaround, but for those who to use it premanently, you can do it

it also shows up at times when you are entering a password

Ouch ! I read to quickly and did'nt see the word "permanently" !
It does the same for me after installing pocketpc keyboard and even after uninstalling it !!!
Did you find a way to get the classic keyboard back ? This one is nice but there are some important keys missing as "." and a key to hide the keyboard !
Thanks
EDIT : The installation of Resco Keyboard got all the original settings back + Resco Keyboard of course.
So if you need to use the famous "hidden HTC keyboard", simply install Resco Keyboard and then Pocketpc keyboard.
You will then have your classic "touch" keyboards replaced by the "hidden keyboard" (+Resco Keyboard installed of course).
But to my mind, Resco keyboard alone is better...

Physical keys stopped inputting letters; numbers work fine (16 keys)

Hi all!
I bought the Touch Dual last week and since then have been doing tens of installs/uninstalls to check what apps are out there etc (AE Button Plus was one of them).
I remember when i got it I could enter both TEXT and numbers from the sliding out number pad. I used the *XT9 button to differentiate between ABC, abc, XT9 - text input methods.
Now pressing the *XT9 buttons doesnt do anything anywhere - all i can enter with my kaypad are corresponding numbers.
I must have removed/unchecked something in the settings, but what?
Thanks in advance!
callix

callix2 said:
Hi all!
I bought the Touch Dual last week and since then have been doing tens of installs/uninstalls to check what apps are out there etc (AE Button Plus was one of them).
I remember when i got it I could enter both TEXT and numbers from the sliding out number pad. I used the *XT9 button to differentiate between ABC, abc, XT9 - text input methods.
Now pressing the *XT9 buttons doesnt do anything anywhere - all i can enter with my kaypad are corresponding numbers.
I must have removed/unchecked something in the settings, but what?
Thanks in advance!
callix
Click to expand...
Click to collapse
Yes!! I too had that problem... It seems that after installing about 5 apps, this will happen. I hard-resetted about 5 times now and i still dont know what exactly causes this trouble

I have the same problem too.. I've posted it under this link
http://forum.xda-developers.com/showthread.php?t=384160
Does anyone know how to solve it?

Solved
Fixed it. The alphabetical input from the hardware 16-keyboard is back in SMS/Word Mobile/Texting programs!!
Just go to Start > Programs > PDA Settings > ROM Settings > Enable T9.
This makes the hardware *xT9 button allow to switch between ABC, abc, #12, T9.
PS: Im using this ROM (http://forum.xda-developers.com/showthread.php?t=364335). The problem occured after I was using the above ROM for a while, and it was fixed without reflashing anything.
Hope this helps!
Callix

is there like a registry fix for this problem instead of flashing an entire rom?

@sebastlim
there's no need to reflash anything. with my Niki Project 6.1 ROM, when the problem started, i just went to Just go to Start > Programs > PDA Settings > ROM Settings > Enable T9.
Callix

callix2 said:
@sebastlim
there's no need to reflash anything. with my Niki Project 6.1 ROM, when the problem started, i just went to Just go to Start > Programs > PDA Settings > ROM Settings > Enable T9.
Callix
Click to expand...
Click to collapse
Yes, but that options is only available on that rom, others dont have it

And even doing that doesnt change anything on my niki rom.

Until I turned it off and back on again. D'oh!

Problem with physical slide out keyboard and soft input panel keyboards
I have a 20 key version touch dual and had this problem as well - and unlike the other posts, I had not installed any additional apps. The WM 6.1 version CE OS 5.2.19716.1.1.0.
Here is what is happenening:
1. The slide out physical keyboard will type only the numbers when the numeric keys are pressed. The alphabet keys on the sides q/w, a/s, z/x, o/p, ,/l etc only input the first letter and dont cycle on to the second letter [eg only q comes up - you cannot bring on w] and the xt9 stops functioning. Pressing the alt or sym/*/xt9 key does nothing other than typing up *.
2. The two soft input panel keyboards (touch keyboard 20 and touch keypad 12) revert to a qwerty keyboard and dont switch to a xt9 mode.
3. I tried using the Start-->Programs-->PDA Settings-->>check T9 option. It works but erratically. Often, it reverts back when the PDA is turned off and on [not soft reset]. When I go back to PDA settings and look, the T9 option is checked and yet the behaviour was non T9. I checked off and checked on T9 -->> works again. Sliding out the physical keypad seems to preserve the xt9 most of the time. Erratic..
I will try to install the fix from HTC

the difinite solution
Check whether PCM keyboard is installed and if yes, uninstall it. The problem will be solved!

If you install the appropriate version of EzInput (found here: http://forum.xda-developers.com/showthread.php?t=426281 ) it should re-enable your hardware keys.
Good luck!

Who here uses the Letter Recognizer for input?

I have a question for those of you (if any) who are using the letter recognizer, the block recognizer, or the original Windows Mobile keyboard as your input method on the Touch HD: Do you get word completion pop-ups?
I'm a long-time WM user (the Touch HD is my fifth WM device) and the letter recognizer is my preferred method of input and one of the reasons I like it is the convenience of not having to type entire long words most of the time, with the ability to simply pick from the completion suggestions pop-up instead. However, I get no completion pop-up on the Touch HD when I use the letter recognizer. The same is true for the block recognizer and the WM keyboard as well. Am I alone in experiencing this? Am I alone in being annoyed by this? What gives?...

I use the Letter Recognizer and find it faster than any of the keyboard. Make sure you enable T9 in the default keyboard and word completion will be available. I thought I lost it too when I accidentally disabled T9.

Thanks for your response. This tells me that something might be wrong on my device, because I get no word completion pop-ups even when I do that.
Here are all of my current settings related to this:
On the Full QWERTY keyboard, the "ABC <-> T9" slider is set to T9.
On the Compact QWERTY keyboard, the "ABC <-> T9" slider is set to T9.
Under "Touch Input Settings", "Word Completion in T9 mode" is selected, "Word Completion in ABC mode" is selected, "Auto-Substitution" is deselected, "Spell Correction" is deselected.
Under the input "Options" (the original WM input options), on the "Word Completion" tab, "Suggest words when entering text" is selected. (The "Suggest after entering" setting is "2 letters", the "Suggest" setting is "4 words", and "Add a space after word" is deselected.) And "Enable Auto Correct" is deselected.
Still no word completion suggestion pop-ups...
I have no idea what could be wrong!
If there's anyone out there with additional insight into this, your feedback would be appreciated. You might be my only hope.

It's odd, I set mine to the "phone keypad" and now it wont go back to any of the others, I've tried them all, selected them, go back in and *poof* it's gone back to a standard phone layout. Turning it on and off failed to fix this so I'm presuming I'm going to have to reset

I have the same problem here too.
What keyboards do you have installed? I have the SPB Keyboard, reckon that might affect things??
All my settings are the same as above...and HD Tweak says T9 and word completion are on. T9 and word completion wwork fine on the keyboards but not the letter/block recogniser.

I don't have any third party keyboard installed (if I don't count the HTC stuff that came with the phone). I do have a bunch of other software installed, on the other hand. But, I don't think any of those have anything to do with input methods (although, it's hard to discount "unintended consequences"...).
I must add that suggestions don't work for me on the Windows Mobile default keyboard either. (I'm not sure if you implied that it works on yours.)
So, my exact situation is as follows:
HTC Full QWERTY keyboard:
Suggestions displayed horizontally listed (i.e., HTC-proprietary)
HTC Compact QWERTY keyboard:
Suggestions displayed horizontally listed (i.e., HTC-proprietary)
HTC Phone keypad:
Suggestions (surprisingly) displayed horizontally listed (i.e., HTC-proprietary)
Windows default keyboard:
No suggestions
Letter recognizer:
No suggestions
Block recognizer:
No suggestions
Suggestions aren't applicable to the Transcriber, naturally.

Perhaps I should have tried this much sooner, but it just occurred to me to try a wider Google search on this topic, and I came across another thread on this site that seems like it might contain the solution(s):
http://forum.xda-developers.com/showthread.php?t=441656&highlight=word+completion
I'm at work right now, so I can't try it right away, but I'll surely do it as soon as I get home. If anyone else with this problem is willing to try that before me, please let us know about the result.

gadgetuk437 said:
I have the same problem here too.
What keyboards do you have installed? I have the SPB Keyboard, reckon that might affect things??
All my settings are the same as above...and HD Tweak says T9 and word completion are on. T9 and word completion wwork fine on the keyboards but not the letter/block recogniser.
Click to expand...
Click to collapse
I use the phone keypad on mine and it was fine up until yesterday.
The only thing it gives now is numbers! every other method of text input appears to be ok

Strange, I have had no issues with word complete as long as T9 is selected in the default HTC Full QWERTY keyboard or any of the HTC keyboard. Had this issue with my Omnia in the past where if T9 is activated, the Word Complete pop-up won't work and I had to do a registry tweak to enable word complete, after which T9 is disabled in the other keyboards.

One questoin from a newbie -
i have a problem that I can not menege to use Letter Recognizer.
In settings for inpust I select Letter Recognizer. And confirm.
But always I get keybord. If I open settings again the Full Querty is chosen.
thanx

sorry - I've read the f... manual
I was to lazy

xmaspast said:
I use the phone keypad on mine and it was fine up until yesterday.
The only thing it gives now is numbers! every other method of text input appears to be ok
Click to expand...
Click to collapse
I had a similar problem on my rom (German) after setting T9 to enabled in HD Tweak. Setting T9 in the keyboard settings is fine but you might wanna try to deactivate it in HD Tweak if you enabled it there before.

should it only work when T9 is on ? Or should it also be on when you use ABC?
Cause I would like to have it on when I enabled ABC

I use the letter recogniser about 50% of the time.. I find it slightly quicker than the keyboard on WM.. However as a long time user of UIQ... SE P800/900/990/1 I wish there was something similar to the letter recogniser available on those?? Any one know? It was so logical.. Use the lower half of the screen for letters, top for numbers, and straddle the middle for capitals.. Not like WM where you are restricted to a small box at the bottom.
anyone know if you can get this for WM6.1?

Well, I'm happy to report that the solution explained in the post at the following URL has done what I was trying to achieve (post #8 on that thread):
http://forum.xda-developers.com/showpost.php?p=2630663&postcount=8
This brings back the word completion pop-up lists on the standard Windows Mobile input methods. It does eliminate the HTC word completion on the HTC input methods, though (including T9, which makes the Compact QWERTY useless for typing words). But, if you're not interested in those input methods and all you want is to be able to use the Letter Recognizer, Block Recognizer, or WM keyboard with word completion, this may be your solution. (Naturally, try it at your own risk...)

memko123 said:
sorry - I've read the f... manual
I was to lazy
Click to expand...
Click to collapse
How exactly did you get the Letter Recogniser to work? I used to have it in the OEM ROM but my Enable_recognisers.cab doesn't seem to work on Dutty's 2.1 xtreme ROM.... or is it me??

Full Qwerty Keyboard turns into number keypad

Whenever a sms is open, the touch screen keyboard that is opened is supposed to be full qwerty. However, mine has turned in a number keypad. There is no way i can change to full qwerty again. I can change into transcriber, block recognizer, letter recongnizer but cannot revert back into qwerty. How can this be?
Even a soft-reset cannot solve this. Can anyone help? Thanks

If I tap the "Up" arrow next to the SIP "Show/Hide" icon I get a popup menu that offers ...
Touch Input Settings
English >
Phone Keypad (this will be what you have selected)
Full QWERTY (this is what you want)
Keyboard
Other Input Methods >
Ta
Dave

Did you turn on the T9 option with HD Tweak? This caused the same problem on the Touch HD, might be the same on the TP2.....just an idea....

DaveShaw said:
If I tap the "Up" arrow next to the SIP "Show/Hide" icon I get a popup menu that offers ...
Touch Input Settings
English >
Phone Keypad (this will be what you have selected)
Full QWERTY (this is what you want)
Keyboard
Other Input Methods >
Ta
Dave
Click to expand...
Click to collapse
Er Dave.... thanks for the suggestion. I already know how to change different input options from arrow up key. Sorry I didnt make myself clear earlier.
The problem is that even when I choose qwerty.... the number keypad still appears. It has happened before and the only way I can go back to qwerty is to go back to previous backup setting.
I'm just wondering if anyone else has faced any problem like this.

michi123 said:
Did you turn on the T9 option with HD Tweak? This caused the same problem on the Touch HD, might be the same on the TP2.....just an idea....
Click to expand...
Click to collapse
Hi michi, I never use HD tweak and T9 option before. Only use qwerty and hardware keyboard only. This number keypad just appeared out of nowhere.

st8800 said:
Er Dave.... thanks for the suggestion. I already know how to change different input options from arrow up key. Sorry I didnt make myself clear earlier.
The problem is that even when I choose qwerty.... the number keypad still appears. It has happened before and the only way I can go back to qwerty is to go back to previous backup setting.
I'm just wondering if anyone else has faced any problem like this.
Click to expand...
Click to collapse
Oh well, worth a shot...
Try the other guys suggestions
Dave

See... funny thing is that 5hrs ago, I backed up the device. During this time, I did not install any software and hardly used the phone except for some sms and inputing new contact info. Suddenly, the qwerty keypad input doesn't appear any more.
I just restored my backup and the qwerty keypad is up again. Hope someone knows what is going on, if not, I have to backup everyday!!!

It happened to me too. I changed the registry so I could map keyboard keys to emulators, changing the eT9 IME to the windows mobile default. Perhaps you have done this? If so, change the values back and it fixes the problem after a soft reset.
I think the registry location was HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts
Layout Text should be "eT9 IME",
Ime File should be "\windows\eT9ime.dll"

I have same problem
I give up on the keyboard for now. Not sure what broke it and I didn't backup everyday. Registry looks a bit different for me.

I did this previously at it work very well.
---------------------------------
Originally Posted by beemerTPPC
IMPORTANT: previously be sure that HKLM\Software\Tegic\eT9\XT9SupportMSSip has a value of 0.
Simply change these two registry keys under:
HKLM\system\currentcontrolset\control\layouts\e 0010409
Ime File : \windows\xt9ime.dll change to Ime File :\windows\compime.dll
and
Layout Text : XT9 IME change to Layout Text : COMP IME
And soft reset.
------------------------------
Today it happened again.... lucky I backup last night. 1 hour ago everything was still working. Again.... no new software or settings changed. What could be the problem?
I checked the settings are still the same.... now even suggested words don't appear.
Sigh... until a solution can be found... I just have to keep doing backup / restore....

mikeinashed said:
It happened to me too. I changed the registry so I could map keyboard keys to emulators, changing the eT9 IME to the windows mobile default. Perhaps you have done this? If so, change the values back and it fixes the problem after a soft reset.
I think the registry location was HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts
Layout Text should be "eT9 IME",
Ime File should be "\windows\eT9ime.dll"
Click to expand...
Click to collapse
I cant choose eT9ime.dll because I really like the suggested words to appear.

This works form every time
Just change
HKLM\Software\Tegic\eT9\Ime.change CurrentET9Style from 1 back to 0

cjatcti said:
Just change
HKLM\Software\Tegic\eT9\Ime.change CurrentET9Style from 1 back to 0
Click to expand...
Click to collapse
Hmm... strange my CurrentET9Style was set at 8. What does this change do?

thanks. I had the same problem on my HTC Fuze.
This helped: HKLM\Software\Tegic\eT9\Ime.change CurrentET9Style from 1 back to 0
but I have a different problem. (had this before the reg edit)
my problem is: If I write hello it'll automaically become hellHello... and if I write it it'll become iIt.. I switched off capitalization but tht didn;t help!!

Worked!!
This reg change did it for me cheers!!!!

cjatcti said:
Just change
HKLM\Software\Tegic\eT9\Ime.change CurrentET9Style from 1 back to 0
Click to expand...
Click to collapse
I just started having this same problem today. I tried cjatcti remedy, and it worked so far . QWERTY keyboard is back to normal. If the phone keyboard comes back, I'll let you all know.

Excellent work. Worked very well so now I have the word selection and the keyboard I like. THANKS

Wish
I would have seen this thread before I hard reset.

Changing the CurrentET9Style from 1 back to 0 works ... but once I go into, say edit a contact, then the number pad will re-appear again. The registry key is modified back to 1 again ... any quick trick to stop this? really don't want to change the key again and again...

I use my Kaiser with the ROM PDA Corner Ultimate X-v9 a six months ago without any problem. Today i saw the first page of the forum the application SMSer from "oldsap". I found interesting and tried to install. Soon after the installation I was testing it and realized that I had the same problem as everyone here. Changing CurrentET9Style from 1 back to 0 solved my problem. I think in my case the problem appeared after the installation of SMSer, so i uninstaled and my QWERTY is working normal now.

Turn off XT9 permanently and stop it from interfering with Swype?

I've installed Swype and really like it. I'm using SIPchange to enable it as a default. Unfortunately, XT9 will interfere with the words selected by Swype even after you've picked the right word. The only way to disable this is to manually change to Touch Input keyboard and disable XT9 on the keyboard before changing back to Swype.
I've already disabled both Spell Correction and Word Completion in Touch Input under Settings> Personal> Input> Touch Input> Options, but XT9 still turns on the next time I restart the phone.

Hi, I'm using swype too and haven't noticed any interference from XT9, but I might not have known what I'm looking for.
What are your symptoms?

I have had that happen to me before on certain Roms... cant tell you which one... usually, it works fine (I am using Topix Rom now)
When it did happen, I turned off XT9 under the settings but I ALSO opened the default keyboard and turned it off there but pressing the key.... moved back to swype after that and the xt9 word options were gone... just the usual swype dictionary/options at times.... Soft reset didn't change anything... it was all ok still
Hope this helps

Unfortunately for me, once I shutdown/soft reset the phone, XT9 is automatically activated on the Touch Input keyboard again even though everything has already been turned off in the Settings>Personal>Input. Also, it seems that the Touch Input keyboard automatically defaults to one of the Chinese input methods instead of English. Maybe that's where the problem lies. Where can I default the Touch Input keyboard to English?
BTW, I have my Locale set as Australia, so that isn't the problem.
The symptoms are: Once you've "Swyped" the word and pick the one you want, XT9 then shows up with it's word choices and either shows the same word or if I have it initial caps, make it all small letters
I also noticed that in Settings>Personal>Input, when I select Swype then click the "OK" button, it doesn't save the selection, and goes back to "Touch Input" when I open the "Input" dialogue again. I guess this probably means that some of my registry entries are toast...

That is indeed weird... do you have something like SIP change installed? I use that to start Swype by default during startup after a restart.. Don't know if that might help...

Yes, I do have SIPchange installed, but it's already set to Swype as the default.

I had the same problem and this is my partial solution.
Go to HKLM/Softwares/Tegic/eT9/IsSupportMSSIPContact
Change the Dword from 1 to 0.
this will get rid of XT9 for Swype but only if it is NOT the default. Therefore, there is the nagging inconvenience of having to change it to Swype every time your soft reset. But it is better than that nothing.

Thanks for the partial solution. It's at least better than what I'm doing now after every reboot, which is to:
1. change Swype to Touch Input
2. change Touch Input to EN so that the keyboard shows up
3. click on the XT9/ABC button
4. change Touch Input back to Swype..
One thing to note, I just went to the registry and there isn't the value you listed. However, there is the following string value:
HKLM\Software\Tegic\eT9\LRU_MS_InputMethod and the value is Swype.
I'm wondering if this is what is causing XT9 to activate when Swype is active.. Do you have this value in your registry? what value is it?
Quick edit to note that I added a DWORD IsSupportMSSIPContact with value "0" and soft reset... Sorry to say that it didn't disable XT9 even if Touch Input was defaulted. Guess my problem is slightly different than yours.

Yes, all those values are the same. Need ot check if you also disable xt9 using some .cab. If not then you will need to do the following:
HKLM\System\CurrentControlSet\Control\Layouts\e0010409\Ime File
Change it to read as compime.dll
and
HKLM\System\CurrentControlSet\Control\Layouts\e0010409\Layout Text
Change to COMP IME
This will disable eT9. Please remember the original values should you want to revert back.
I think that should work.
have fun.

weenween, the two registry values you gave are already what is on my phone..
But XT9 still enables itself when I restart the phone. I've now resigned myself to disabling XT9 on the Touch Input keyboard manually each time I restart the phone.
In any case, thanks for your help.

I have exactly the same problem adn symptoms as GregWee. Must be becasue we both have Hong Kong HD2s where the default english keyboard is PinYin?

I have a similar issue. I have a TMOUS HD2 with QQ 2010 mobile loaded on it for chinese text entry. The QQ keypad has become the default everytime I reboot - entirely unwanted. Somehow it interferes with the contact dropdown list in messaging and email. It has something to do with the T9 staying on when entering a contact name. I installed sipchange but it does not overide the QQ default after a soft reset.
After changing between keyboards a few time it begins to work properly in email and then finally in messages. Right now, since the last soft reboot and playing around, when I am in either email or messages the stock keyboard will automatically switch from T9 to abc when I move the cursor to enter a contact name. The contacts appear as I type as they should. Swype works fine too. I have no idea what I did to get it to work but I have had the same experience several times today. Hopefully I will figure it out.
I would like to know a way to override the QQ as the default keyboard. I think this might fix the problem.
Any suggestions?