all what I did is installed program called wasserwaage-net-en.XScale_2003__4K__v4.20 or what called bubble level
and was working fine
and by mistake while playing on it pressed on use Samsung Omnia use this sensor, and worked after
now nothing working for g-sensor for example Teeter
also g-sesnor calibration not working at all nothing move
but pic rotate when rotate the phone working
also mute the ring when flip on its face
tried to uninstall this application and done soft reset no luck
hope can fix without need for hard reset
Related
Well a few days ago I went on a barrage and installed a bunch of apps like Gyrator 2, SensorLock, LevelSight, HTC Home, Ultimate Launch, HomeScreen ++.
I also coincidentally noticed two problems now First is when the device is on and I press the power, it doesn't turn the device off! Second is the HD is supposed to be able to detect the status of the stylus so when you pull it out in a call it opens the notes application. I also checked with Gyrator 2 which shows what the system reads for the stylus status and it no longer detects whether the stylus is in or not!
I'm going to try to uninstall each app one by one... but do any of you know whether there might be some other problem?? Or if someone's experienced the same thing, what are some recommendations to remedy this issue?
Each day of using the HD more and more problems keep popping up... I didn't drop $900 on this phone for nothing ><"
Do you also have problems with the volume buttons? If so, then perhaps your keypad service isn't running. You can check this with task manager v3.1
cardefbel said:
Do you also have problems with the volume buttons? If so, then perhaps your keypad service isn't running. You can check this with task manager v3.1
Click to expand...
Click to collapse
Ahh nifty the volume buttons don't work. Now how to turn this back on... hrmmm... time to poke around.
I had this problem when using MobileMagic for auto rotation using the G-Sensor. Uninstalling this fixed the problem. I now use ChangeScreen and find that this works better for me.
Hope this helps.
cardefbel was right it was the keypad service, I must've turned it off while messing around in the registry, should be more careful next time...
Turned it back on and everything works fine now. Thanks!
Ive noticed that when the phone rings in my pocket and I attempt to pick it up, I often accidentally hang up since I touch the END-key on the way up from the pocket.
Ideally it should only be possible to answer the phone by sweeping finger across screen, but it turns out that also hardware keys are active once it wakes up on incoming call.
Anyone having same problems as me?
Is there a fix for it?
Thanks!
Here's InCall Lock - a program I made for my HD but it should work on any WM5+ device including HD2. Requires .Net 3.5.
Just tried this and couldnt get it to work :-(
Settings/Menu/All Settings/Lock/Display and choice Windows Classic.
not working
seams like all the programs available don t work with the leo, any solution please?
also deeply annoyed by this. Normally S2U2 was doing this on my HD, but even that fails with HD2
For some strange reason the start button has stopped working, i can only access start by touching top left of screen. Tried soft reset and it worked for a while and then stopped again any ideas?
Timax_50 said:
For some strange reason the start button has stopped working, i can only access start by touching top left of screen. Tried soft reset and it worked for a while and then stopped again any ideas?
Click to expand...
Click to collapse
I have that problem when I add a 3rd party task manager. I use WK Task. Have you added any software lately ?
Skyfire makes start button stop working.
I detected this problem when Skyfire 1.5 was running. I close Skyfire and the button works again.
hello ive searched everywhere is there an app or tweak for hd2 im annoyed that when on a call i keep pressing the on screen buttons is there anything i can do to stop this thanks..
The light sensor on the HD2 should turn the screen off automatically so that you don't press anything. That being said maybe you have a problem with your sensor so make sure it works, if it doesn't then try flashing another rom or call HTC.
Hope this helps.
master reset
rugersrob said:
hello ive searched everywhere is there an app or tweak for hd2 im annoyed that when on a call i keep pressing the on screen buttons is there anything i can do to stop this thanks..
Click to expand...
Click to collapse
you try a master reset befor you anything bigger in your phone, sometimes is always very easy but since you can't find it just do a master reset.
start,-settings-security-factory reset hope this work
same problem here, hard reset didn't change anything.
maybe you want to try this (stops working after soft reset, until i re-install) or this (also doesn't work right for me).
maybe one of theses two works for you.
the last option would be to go to \Windows\Lockscreen and rename the "LS_PhoneCallScene_480x800.cpr" (brings back the default wm 6.5 lockscreen) and then lock the device (windows button --> lock) on each call.
This app can help you.
http://forum.xda-developers.com/showthread.php?p=52931285
Hi all,
since I am new in this forum I would appreciate if I am in the wrong section to raise my issues, please let me know and I will accordingly move my post. Thanks.
Following issues I face with my 2 month old UMI Zero.
1. can not make regular phone calls via speaker. my partner can listen, myself cannot hear a word. fact headset icon shows in the very top menue line, speaking via headset works fine but does not make life easy.
serveral factory resets done, updates etc. nothing worked.
2. yesterday, the next issues occured out of nothing. my touch buttons do not operate anymore at all. no function behind except the blue lights. Need to reboot if I would like to switch apps/functions.
Anyone who can help me to solve my problem or experienced same issue(s).
Thank you.
Best
StadenKarl
Same issue with buttons with my umi zero
My buttons stopped working as well all at once, considered as contact problem until one day they returned to respond unexpectedly.
After working fine for a while stopped responding once again.
Thinking it's might be software issue, I've installed a new rom material V 3.0 lollipop inspired 4.4 kitkat provided by umi Root joy tool. It didn't help, however, regardless to update the buttons now are lightened but not stable responsive therfore still useless.
For now used this post to enable soft keys: search Google for "enable-soft-keys-navigation-bar-android-phone"
Another free app which I found useful is called My home Button, can be downloaded from play store.
Hopefully a solution will be found soon
The only solution is to dissasemble the smartphone and connect properly the hardware components, you can dissassemble your phone with an hot air gun
Same issue and possible solution
Come on! Are u kidding?
My buttons stopped working yesterday but with a reboot everything was fine again. Until now. No signal from the buttons, light nor fucntion. I'll try flashing it and, if not, i will have to dissasemble and check the hardware.
If this doesn't work I'm thinking about downloading an xposed module that allows you to remap the phisycal buttons. I'll try remapping home, back and settings buttons into the power and volume ones. Let's see if it works.
First of all sorry for my bad english ( I'm french). For the problem with your touch bouton you can also use gravity box ! With this app you can enable the navigation bar and you gonna have touch bouton like the nexus phones. If you don't know how to do that you can ask me question in a next post.
Dear All,
Just want o let you know that after being hesitant for so long, I finally disassembled my Umi Zero and guess what? The back camera connector was not connected, and the touch button + speaker connector at the bottom was also not connected! I just connected them back, put the battery back, and touch buttons + mic were working fine. Tested with voice recorder, playing audio, and also few calls.
Disappointed though by the component assembly....most of the screws were very lose and one even came out without unscrewing. Also, the screws are of different sizes, so please please please take note where each screw goes (What I did is get an A4 paper, made a sketch of he phone outline, and placed the screws on each area where I removed them from).
Note : Most likely you will break the back glass cover so you might as well place an order on Aliexpress before you disassemble it. It is possible to remove it without breaking with lots of extra caution though.
No sound and no soft keys
I had the same problem with my daughters Umi Zero.
I found a work round for the buttons:
-temporarily install an app which emulates the keys so you can navigate. eg Handy Soft Keys from the Playstore
-enable in settings/accessibility
-reboot
-need to be rooted
-install file manager, eg ES file explorer
-in ES tools, activate Root Explorer
-navigate to local/device/system/build.prop
-drop to end, leave a couple of lines space then edit by adding: qemu.hw.mainkeys=0
-save and reboot
You have soft keys
Uninstall emulator app
Backup etc before you start
Haven't fixed the sound yet: nothing from the speaker, phone and headphone jack doesn't work.
Bluetooth does work.