Database Users

HARGH HELP HELP HELP :(

i was trying to upgrade my Qtek 1010 with an english ROM but during the uploading of the ROM file , energy goes down here at home
now Qtek show me a nice empty bar and isn't recognized from Active Sync.
there is a WAY to restore everything like starting ?
PLEASE HELP! i don't want to throw away my qtek

Fortunately following the guides on this forum i managed how to reinstall everything , and everything work fine
thanks to all in this forum

HELP ME P3300 Does not upgrade to WM6 Cause Error 260

Hi to everybody.
I would want to set you a very strange problem that has happened to one friend of mine. He has installed the original ROM wm5 and he wants to pass to wm6, once connected the pda to the computer activesync unfortunately it tries to syncronize him but remains to syncronize to the endless (1° strangeness) one.
Later starting the official updating htc downloaded by the site, continuing with the instructions and reaching the prophetic moment in which the pda is disconnected by activesync and puts on in formality bootloader to adjourn from the prophetic error 260 that I have documented and I bring here you him:
Me being a little hacker and almost all knowing the methods to upgrade the ROM I have recommended him to try to put in formality bootloader to extract the content of the original file and to make to depart the file ROMUpdateUtility, but also them error 260. Not giving me for defeated I have tried the last method from me known, the updating from micro sd card.I have dictated him footstep footstep what had to do but not even this time of it to wanted to know to adjourn him (2° strangeness, doesn't know however if has correctly done all finding himself him in the Marche and me in Sicily ). I think that can treat more specifically him of the pc of the operating system, even if he has told me that it has the xp.
Now I put me in your hands, aspect suggestions on as to resolve.
I thank you in advance
And excuse me for mine bad bad..... English

To get your P3300 back to live
Don't worry if things goes wrong sometimes.
1.What you can do is maybe a good option if you have a P3300 without a
provider then you can better going
to the website of Htc register yourself (its free!) Then register
your model of your Htc Product.
Go to the Htc club. you will find your originale udate rom!!! This is also
to find it here.
2. There is a nother option.
copy your RUU_singned img to a sd card and put the sd card bac to
your P3300.
Start the bootloader by pressing the both key rec. and power
and hold em when your do a reset.
You will see a 3 color line on your screen then you will see
the install progres from your img.
wait and follow the instruction on that display.
I had also a problem a month ago but and this option by the sd card
did working fine for me.
Now I update the software and also the dial pad to vista look. That is
realy awesome!
It's working fine and do its job what this model has to do!
Succes and good luck!

PLEASE I need help! I have an htc p3300 and when I try to update it goes up to 3% and turns off. There isn't any rom that I haven't tried but noone worked . Is there anything I can do ? Thanks in advance

...
takes sd card out..
you done uspl.. if not.. click it in my signature..

In need o a little assistence.

Hello,
It's already a long time ago since i needed a Dutch ROM for the HP 6xx series, i can't ind this anywhere but now i finally have a Dutch device.
so now i heard something about ROM Dumping, i also understood that this has something to do with pdocread.
but as the rookie ( maybe even ''noob'' ) that i am, i want to ask the following question, how do i dump my dutch rom, what programs do i have to use or that, and is installing a Dutch rom the same thing as flashing it to your device? or do i have to convert files to .dio format?
all help is welcome!
post scriptum,
i got the 614 in every language available right now, so if you do me the favour for guiding me through this dumping, ill upload all the ROMS of any language you want, i got almost every language.
sincerley, alex

ok, i used DUMP TOOLS now and in the ''manual''of dump tools
it says i have to copy dump_gene_os_extrom.exe
to my device, i did this.
it also said that i needed a minimum of 70MB.
after like 5 minutes the device copied data to the storage card
im using a 1 gb micro SD of kingston.
now, it already copied 716mb on the SD card and growing.
i cant imagine a rom any bigger then like 120MB.
i tried alot of things so could someone please help me?
im willing to donate if anybody wants money for their time, no problem.

you are not using the correct dump tool, there is specific dump tool for 61x here. You need to connect to computer with activesync to use it

keyx said:
you are not using the correct dump tool, there is specific dump tool for 61x here. You need to connect to computer with activesync to use it
Click to expand...
Click to collapse
Thank you very much for this, it really helped me, i retreived the following files now from my device :
- diskimage_Ver.nb0
- part2.nb0.payload
- part2.nb0.payload.part1
- part02.raw
the files standing above, are the files that where retreived from my Dutch hp 614, now i want this rom, on my other 614 that ain't Dutch.
i already tried to rename the diskimage_Ver.nb0 to > flash.dio, then flashed that file into my 614, after that whas done it got stuck at the startup screen.
so is anybody prepared to help me out and tell me how i can get it to work.
P.S. for the ones that are going to link me to the thread where someone links to a Dutch ROM, that one doesnt work, it doesnt go any further then the start up screen.
if there's people that want money for their help thats absolutely no problem.
i just want my pda restored and dutch.
thank you in advance.

that is weird...it should work
anyway can you flash custom rom like my 6.5 or sergiorus 6.1 without problem?
also post your result from executing this command when your device is running a working rom:
pdocread -l
and
pdocread -t

Need help, possible made a brick of my Wizard

Hi, pleas if someone know, help me.
Made downgrade of my Qtec9100 right due to instructions of Dr Puttingham. Got G3. All was great but, by mistake I started flashing radio first. (radio rom 3.02.11) But something went wrong.
Wizard do not want comunicate with PC. Made hard reset, but not work.
Still see big beer and greetings from Button. IPL 1.01 and SPL 1.01 and OS 1.5.4.2 - after 5 times reseting it will start WM5. Phone is off.
Please help. Is there som cab which can help me?? I still can write some programs to the storage card. Can I flash it back to radio 1.01 ? from card? And then may start work USB....
Please help me.
Uff, can charge but only if it is off.

hey again,
really no one can help me?
Are there some "cab" which can reanimate usb connection of my wizard?
I still can use my memory card to do some update. But cannot find any cab programm. please help.

hi,
don't worry. i have nearly the same problem with my g4.
bootloader start, but flashing anything didn't let the phone starts.
i think our phones are too old, so the cracks don'T read the threads here.
my posting in g4-section is also didn't answered.
the ftp-section is empty.
if noone can help me the next days, i will buy another one from ebay.
so don't worry
greetz

Hmm, but that's pity isn't it?
my wizard is working but can't use USB connection. maybe there is sam cab program which can make changes and set USB to work.
but thx 4 reply

hi,
no one help me, but reading of forum save my wizard from destruction.
this thread help me and my Wizard is in good health yet
http://forum.xda-developers.com/showthread.php?t=341158&highlight=program
Thx a lot to You Great Zabardast_1 - You are a great ONE

[Q] [help] rw6828 rom update without left softkey

I'am new to xda forum, and I try to search and explore for a match problem but unfortunatelly I can't find . so correct me if I'am wrong
I get an 2nd ipaq rw6828 with left softkey problem. On daily usage, it wasn't a big deal for me. But when it comes to rom upgrading, it was.
On all rom upgrading tutorial, it's all use left soft key to enter bootloader, both on upgrading via SD card or via PC.
I've cleaned the keyboard path n flexy cable. It's definitelly not "dirty keypad" problem.
It was important for me to upgrade to wm6
So, if you all have a tutorial for rom upgrading without left softkey, point it to me.
Many thanks
PS : sory for my bad english

bump
no one here (