Hi, pleas if someone know, help me.
Made downgrade of my Qtec9100 right due to instructions of Dr Puttingham. Got G3. All was great but, by mistake I started flashing radio first. (radio rom 3.02.11) But something went wrong.
Wizard do not want comunicate with PC. Made hard reset, but not work.
Still see big beer and greetings from Button. IPL 1.01 and SPL 1.01 and OS 1.5.4.2 - after 5 times reseting it will start WM5. Phone is off.
Please help. Is there som cab which can help me?? I still can write some programs to the storage card. Can I flash it back to radio 1.01 ? from card? And then may start work USB....
Please help me.
Uff, can charge but only if it is off.
hey again,
really no one can help me?
Are there some "cab" which can reanimate usb connection of my wizard?
I still can use my memory card to do some update. But cannot find any cab programm. please help.
hi,
don't worry. i have nearly the same problem with my g4.
bootloader start, but flashing anything didn't let the phone starts.
i think our phones are too old, so the cracks don'T read the threads here.
my posting in g4-section is also didn't answered.
the ftp-section is empty.
if noone can help me the next days, i will buy another one from ebay.
so don't worry
greetz
Hmm, but that's pity isn't it?
my wizard is working but can't use USB connection. maybe there is sam cab program which can make changes and set USB to work.
but thx 4 reply
hi,
no one help me, but reading of forum save my wizard from destruction.
this thread help me and my Wizard is in good health yet
http://forum.xda-developers.com/showthread.php?t=341158&highlight=program
Thx a lot to You Great Zabardast_1 - You are a great ONE
Related
Hello Guys,
I tried about everything, but i cannot get the windows 2005 splashscreens installed. I tried the file from buzz, the one in the "all download links" topic, and even the old cab file. Do i need to do a hard reset to get it done? I have the feeling i am missing something here...
i did it ones before when i had 2003, and therefore i now have windows 200SE splashscreens, very nice, but i prefer the 2005 ones now. Because i am running 2005
Thankx in advance!
P.S : thankx for all the great work on 2005, i am running on that OS now, and it is perfect!
I am stuck with the same problem
Hello,
I had the same problem.
I downgrade my Qtek2020 with win2003SE with a customized extended rom (2005 bootscreen).
And i re-upgrade it with win2005.
Now i have a nice boot screen and the most important, now the cab for changing bootscreen are working... Just need a soft reset to see the screen.
It's radical method, but it work.... and take time (more than 1h)
Bye
Garou-69
hi garou,
So there is a way to solve this problem. I hope there is a more
less dramatic way to get this problem solved
perhaps someone can look into this?
Greetz,
braindump
Read here...
http://forum.xda-developers.com/viewtopic.php?p=117057#117057
Hello James.
Thankx for your post!
greetz,
Braindump
hi,
try to unlock and unhid the extROM.
reboot and then install the bootsplash cab.
reboot again...
buzz
hello buzz,
thankx for the advice, i just did that, and it works like a charm.
don't you just love that himalaya device. best piece of hardware i ever bought!!
greetz,
braindump
...that makes me really glad... ;o)))
buzz
buzz_lightyear said:
hi,
try to unlock and unhid the extROM.
reboot and then install the bootsplash cab.
reboot again...
buzz
Click to expand...
Click to collapse
hi.
how about Wm5Themes. I installed it and nothing happens. Help pleazzz!
Thanks
How about us under 1.60c.00WWE with PS and 30.53 Storage 120.32 Program memory configuration?
There is no Extended_ROM partition... :?
EDIT:
Never mind... I ran the Extended ROM unlocker anyways and even though it does not show the Extended partition it allows the bootscreens to install just fine.
Regards,
Rayan
Hi to everybody.
I would want to set you a very strange problem that has happened to one friend of mine. He has installed the original ROM wm5 and he wants to pass to wm6, once connected the pda to the computer activesync unfortunately it tries to syncronize him but remains to syncronize to the endless (1° strangeness) one.
Later starting the official updating htc downloaded by the site, continuing with the instructions and reaching the prophetic moment in which the pda is disconnected by activesync and puts on in formality bootloader to adjourn from the prophetic error 260 that I have documented and I bring here you him:
Me being a little hacker and almost all knowing the methods to upgrade the ROM I have recommended him to try to put in formality bootloader to extract the content of the original file and to make to depart the file ROMUpdateUtility, but also them error 260. Not giving me for defeated I have tried the last method from me known, the updating from micro sd card.I have dictated him footstep footstep what had to do but not even this time of it to wanted to know to adjourn him (2° strangeness, doesn't know however if has correctly done all finding himself him in the Marche and me in Sicily ). I think that can treat more specifically him of the pc of the operating system, even if he has told me that it has the xp.
Now I put me in your hands, aspect suggestions on as to resolve.
I thank you in advance
And excuse me for mine bad bad..... English
To get your P3300 back to live
Don't worry if things goes wrong sometimes.
1.What you can do is maybe a good option if you have a P3300 without a
provider then you can better going
to the website of Htc register yourself (its free!) Then register
your model of your Htc Product.
Go to the Htc club. you will find your originale udate rom!!! This is also
to find it here.
2. There is a nother option.
copy your RUU_singned img to a sd card and put the sd card bac to
your P3300.
Start the bootloader by pressing the both key rec. and power
and hold em when your do a reset.
You will see a 3 color line on your screen then you will see
the install progres from your img.
wait and follow the instruction on that display.
I had also a problem a month ago but and this option by the sd card
did working fine for me.
Now I update the software and also the dial pad to vista look. That is
realy awesome!
It's working fine and do its job what this model has to do!
Succes and good luck!
PLEASE I need help! I have an htc p3300 and when I try to update it goes up to 3% and turns off. There isn't any rom that I haven't tried but noone worked . Is there anything I can do ? Thanks in advance
...
takes sd card out..
you done uspl.. if not.. click it in my signature..
Hello everybody,
I'm new on this forum, so firstly I must appologise you for my english grammar and for my impatience.
I searched this forum and the net for answers for my questions but after a week I'm so confused to write a new Topic about it.
So I upgrade my MDAIII from WM2003SE to helmi's WM6.
I started from repartition Extended ROM. I unhided & unlocked, but when I try to repart ExtROM (on many possible ways) I allways have a bug...
So then I thought that isn't imidiately for me, and I just do the upgrade.
Now when everythings is okay I want to finish the software on my device.
I looked up for Extended ROM for WM6. I have the xplode's cubs.
I have found the issue about installing things from ExtROM from Storage Card. But this isn't for me enough resolution.
Meybe I'm crazy, and you say I haven't got any problems (like keep comming Christmas), but when my ExtROM is unused and I can't resize memory, I can use it.
To the now I didn't found the resolution for unhide, unlock & change my ExtROM on WM6.
But when you tell me this can be true and it will work, I can downgrade my device for WM2003, change the whole ExtROM cabs and other files in it, and then upgrade to WM6.
I found out that in these cabs isn't a autorun.exe, anybody knows how do with this?
PS. Can anybody tell me that Windows Update in WM6 work and update anythink? 'Cause I don't want to install things that they are unusable for me like VOIP aplication (I prefer Skype) and Audio Manager and WMDC.
Thanx for all of your answers. Regards
99% answers are under search button and sometimes even on Wiki.
Just 2 things to make you sure (but still nothing new): unlock and unhide and reformat is possible only in ppc2003. I don't think it is possible to use this space in WM6. You just loose 16MB of flash space. 99% of us had no problems with getting rid of ExtROM. Search buttons has some solutions if you can specify your problem. "I allways have a bug..." is not specifing a problem, at least not for me, as I'm not a fortuneteller. Even being a fortuneteller I cannot promise you that anything will work for sure, as you (your child, dog, girl, wife, UFO, whatever) can step on your BA (or disconnect, or take the battery out) and break it in the middle of the process. Just try to find out.
Windows UPDATE does not do anything for you. For sure not in BA. Want to know more, search. And if you don't like shopping, go fishing I see no point in asking us what to do not to do sth.
And Merry Christmas We will talk about new year later on.
PS: don't push all the buttons and run flashing-related programs without first reading what are those buttons/programs for. I mean it.
I have an unbranded Chinese P800 from eBay and would like to upgrade it to WM 6.0. What I have onboard :
1. WM 5.0 OS 5.1.525 (Build 15364.3.4.4)
2. Processor ARM926T OMAP730
However, one perculiar thing is that I can't find any Device Info on IPL, SPL, Radio ROM etc. I've tried using WST 4.2.2 but to no avail. I'm using my Lenovo S10 Netbook running XP and ASync 4.5. What I've managed to do are :
1. Run USPL, it goes from 0.. to 60.. and hangs, I reset my P800, USPL resumes to 70..100 and the RUU program starts,
2. the screen on my P800 turns dark with the Linux Penguin and some message of mapping, preloader etc comes on temporarily before Windows comes on again,
3. RUU runs, upgrading to image 9.99 (original image is blank-no info), when UPDATE ROM IMAGE ON YOUR PDA PHONE comes on it never gets to more than 0% (no blue progress bar), my P800 screen goes dark, loses connection and I get ERROR(260).
I have done this several times and there is no way I can verify if the CID is unlocked as I can't get the SPL info anywhere. So I will appreciate any help I can get. Thanks in advance.
Hi Salimbs,
Have a look at these two posts:
* Regarding the CID unlock for Artemis
http://forum.xda-developers.com/showthread.php?t=334667
* Regarding the error 260
http://forum.xda-developers.com/showthread.php?t=293085&highlight=error+260
Hope this will solve your problem
mouse.co.nr said:
Hi Salimbs,
Have a look at these two posts:
* Regarding the CID unlock for Artemis
http://forum.xda-developers.com/showthread.php?t=334667
* Regarding the error 260
http://forum.xda-developers.com/showthread.php?t=293085&highlight=error+260
Hope this will solve your problem
Click to expand...
Click to collapse
Hi mouse.co.nr,
Many thanks for your reply and pointing to the right direction. I'll get to it asap and post the outcome (success I hope!)
Hi Salimbs,
just another note,
in the past I found myself in big trouble (not with Himalaya as it was SD flashed) but with Charmer and Magician ROM updates, also with ROMs that I have already used in the past and classified as stable,
Roms used to get blocked during upgrade leaving me in Boot mode if I don't remember bad..
I have noticed that this error was common when Ms. Office applications like for sxample Word or Excel was turned on!
it makes like a kind of disturb to the rom!
once closed (all office and not necessary applications) roms updates smooth and bug free!
Don't remember if it was an Err 260 or not, I just remember that update blocked at a certain point...
try to do your upgrades with office turned off!
wish it will help to solve your problem
X-Mouse
mouse.co.nr said:
Hi Salimbs,
just another note,
in the past I found myself in big trouble (not with Himalaya as it was SD flashed) but with Charmer and Magician ROM updates, also with ROMs that I have already used in the past and classified as stable,
Roms used to get blocked during upgrade leaving me in Boot mode if I don't remember bad..
I have noticed that this error was common when Ms. Office applications like for sxample Word or Excel was turned on!
it makes like a kind of disturb to the rom!
once closed (all office and not necessary applications) roms updates smooth and bug free!
Don't remember if it was an Err 260 or not, I just remember that update blocked at a certain point...
try to do your upgrades with office turned off!
wish it will help to solve your problem
X-Mouse
Click to expand...
Click to collapse
Hi mouse.co.nr,
Well noted and I'll keep this in mind. From your experience have you ever tried the SDHC.cab so that your phone can read the micro SDHC? I ran it in my phone and now my STORAGE CARD is gone! Anyway, thanks again. Cheers!
Not SDHC my friend but Artemis SDHC,
I don't know what is exactly the difference, maybe one is for big SD and the other is for MicroSD, anyway I've tried the one for artemis and now I'm working with a 8 GB micro sd, and it can go till 16 GB.
I've tried that with other artemis ROM versions and works very good...
For your problem have a look at this post:
http://forum.xda-developers.com/showthread.php?t=345038;
and download the programs indicated below...
What I advice you to do is the following:
1) remove your SDHC card (it have a sort of bad luck with any upgrade that needs a reboot)
2) copy SDHC_Artemis_back2original.cab to your documents folder (PPC documents obviously) then run it, soft reset.
3) then copy the correct SD HC for artemis "SDHC-Artemis.cab ", in the same way of the above and run it.
this shuld work "I wish for you"
let me know..
how about the ROM update? did you succeed at the end?
have you also updated also GSM radio ROM? generally original roms come with a 2.11.... version, old and not always good in reception!
I advice to change it in 03.18.90 shall work well also with your provider, for GSM signal WIFI, GPRS and GPS..
have a look at this post for more details: http://forum.xda-developers.com/showthread.php?t=397939
X-Mouse
mouse.co.nr said:
Not SDHC my friend but Artemis SDHC,
I don't know what is exactly the difference, maybe one is for big SD and the other is for MicroSD, anyway I've tried the one for artemis and now I'm working with a 8 GB micro sd, and it can go till 16 GB.
I've tried that with other artemis ROM versions and works very good...
For your problem have a look at this post:
http://forum.xda-developers.com/showthread.php?t=345038;
and download the programs indicated below...
What I advice you to do is the following:
1) remove your SDHC card (it have a sort of bad luck with any upgrade that needs a reboot)
2) copy SDHC_Artemis_back2original.cab to your documents folder (PPC documents obviously) then run it, soft reset.
3) then copy the correct SD HC for artemis "SDHC-Artemis.cab ", in the same way of the above and run it.
this shuld work "I wish for you"
let me know..
how about the ROM update? did you succeed at the end?
have you also updated also GSM radio ROM? generally original roms come with a 2.11.... version, old and not always good in reception!
I advice to change it in 03.18.90 shall work well also with your provider, for GSM signal WIFI, GPRS and GPS..
have a look at this post for more details: http://forum.xda-developers.com/showthread.php?t=397939
X-Mouse
Click to expand...
Click to collapse
Hi Mouse,
Thanks to you my STORAGE CARD problem is solved! However with regards to my ROM update I'm still a little confused.I've managed to patch the artemis_jumpSPL_pof_v1.nb using Kermit the Frog(jumpSPL.exe). After that I run the RUU again but I still get the same result-0%Can you tell me how or show me the relevant threads?
Hello Salimbs,
Kermit sounds funny but it's the first time I don't know how does it work!!
try the ufficial SPL unlocker for artemis, nothing more,
download from here:
http://forum.xda-developers.com/showthread.php?t=311403
* Connect your PPC through Active Sync (connection shall be established),
* Run start_uspl.exe from the Artemis_USPL package in the link above,
* Run till it reachs 100% and Dos Window turns off alone, and launches RUU upgrade interface..yes, yes, continue, continue.... 100%
* After device shall have SPL 1.11 and so you can load new ROMs
let me know if it will solve the problem..
X-Mouse
mouse.co.nr said:
Hello Salimbs,
Kermit sounds funny but it's the first time I don't know how does it work!!
try the ufficial SPL unlocker for artemis, nothing more,
download from here:
http://forum.xda-developers.com/showthread.php?t=311403
* Connect your PPC through Active Sync (connection shall be established),
* Run start_uspl.exe from the Artemis_USPL package in the link above,
* Run till it reachs 100% and Dos Window turns off alone, and launches RUU upgrade interface..yes, yes, continue, continue.... 100%
* After device shall have SPL 1.11 and so you can load new ROMs
let me know if it will solve the problem..
X-Mouse
Click to expand...
Click to collapse
Hi mouse,
Actually "Kermit the Frog" is the icon for JumpSPL.exe. Anyway, like I've mentioned in my first post everything seems OK except that I can't check for the SPL and when the RUU runs it never gets to more than 0% and then I lose connection and get ERROR 260. I'll be trying again and let you know of the outcome. Once again, thank you, I really appreciate your help!
salimbs.
Hi Salimbs,
sorry for hearing that...
try to enable RAPI before USPL!
http://forum.xda-developers.com/showthread.php?t=320155
Remove SDHC card (and uninstall SDHC software from ppc)
Then USPL
Then Rom Update Utility
mouse.co.nr said:
Hi Salimbs,
sorry for hearing that...
try to enable RAPI before USPL!
http://forum.xda-developers.com/showthread.php?t=320155
Remove SDHC card (and uninstall SDHC software from ppc)
Then USPL
Then Rom Update Utility
Click to expand...
Click to collapse
Hi Mouse,
I'm open to all suggestion. I'll try it again and we'll see. Thanks.
I'm afraid that I've not met with any success after trying all the combination and tricks mentioned in this thread. Every time at the part of the RUU flashing it never goes beyond 0% then I lose connection and get ERROR 260. I would appreciate any help I can get, and thank you in advance.
Hallo,
i have got a p800 from china and have the same problems. I tried all things but the update doesnt work. The connection always interupts with err260.
regards
HOPE TO HELP ME PLS...
AFTER LOT OF EXPERIMENTS-with upgrading and trying diferent roms. spl 3.50 , 1,20.
My device htc x7500 ameo, do not boot any more- do not at all,just black screen.
-when i press the power on button the green light is lighting continously but the ameo never start.
-last one. i check the spl ver on my device it is spl 1,20olipro...
do you know how to resolve this biig problem???
thank you very very much for your help.
freelover said:
HOPE TO HELP ME PLS...
AFTER LOT OF EXPERIMENTS-with upgrading and trying diferent roms. spl 3.50 , 1,20.
My device htc x7500 ameo, do not boot any more- do not at all,just black screen.
-when i press the power on button the green light is lighting continously but the ameo never start.
-last one. i check the spl ver on my device it is spl 1,20olipro...
do you know how to resolve this biig problem???
thank you very very much for your help.
Click to expand...
Click to collapse
I SOLVED IT.
SOLUTION:
HTC Athena/SD Card Flashing
From XDA-Developers
(Redirected from Athena SD Card Flashing)
Jump to: navigation, search
Rename the .NBH file to ATHEIMG.nbh and copy it to your miniSD card. Press camera+com manager+soft reset to bootloader and wait for reading ATHEIMG.nbh from SD. Remember, the miniSD card must be formatted with a FAT32 filesystem before copying the file ATHEIMG.nbh to your miniSD. After finished, do a soft reset.
pls i need any spl 1.2 rom URGENTLY
Thanks to everyone especially cmonex for the good works but pls people i need serious help i have been searching for any spl 1.2 rom but all the links are down, i would really appreciate if someone could upload one for me or just mail it. pls my athena isdown and i really need to get back on mobile. here is my mail [email protected]
i would really be very grateful.......
Laoluibitoye said:
Thanks to everyone especially cmonex for the good works but pls people i need serious help i have been searching for any spl 1.2 rom but all the links are down, i would really appreciate if someone could upload one for me or just mail it. pls my athena isdown and i really need to get back on mobile. here is my mail [email protected]
i would really be very grateful.......
Click to expand...
Click to collapse
you can download spl 1.2 at http://forum.xda-developers.com/showpost.php?p=2372079&postcount=1