Just a quick question,
As I understood, the Touch HD has a bug of when you rotate your screen to landscape, sometime the Phone dialer appears (im using gyrator 2)
With all the cooked rom, fixes around, I just wonder if this has been fixed yet? I've try searching using several related keywords but no luck...
Thanks.
I have this problem too - I'm using GSen but I'm going to try some of the others people have suggested
Switch to WM dialer rather than HTC dialer. YOu will loose the ability to make video calls though.
use changescreen v 1.5, its the best without bugs
I am not aware of this bug (with FlipIt)? :S
I have this problem too. Even when gyrator is not activated.
Could anyone describe this bug a litte bit more precisely? I haven't noticed any bug with the dialer yet even while using Gyrator2.
So, maybe its just an configuration issue?
johnpatcher said:
Could anyone describe this bug a litte bit more precisely? I haven't noticed any but with the dialer yet even with Gyrator2.
So, maybe its just an configuration issue?
Click to expand...
Click to collapse
For me it happens sometimes (ok, actually most of the times) when I rotate the device to use landscape mode in Opera or another program. It jumps out of the program and the dialer appears for a few seconds then finally ends up in TF3D...
as I understood it, it's TouchFlo which is causing problems as it was not designed to be used in landscape. Switch off tf3d and the rotation issues go away..
Related
Hi guys
Does anyone know if there is a fix for this bug as mentioned on the Gyrator website help page? In fact, does anyone get this bug or just a special few??
Q. When I rotate to any new orientation, the phone application pops up, or the today/manila screen appears?
A. As you'll probably know, orientation is disabled by default on the Diamond, because the HTC developers are either too incompetent, or lazy, to build applications which are orientation aware. As such, strange things happen with either Gyrator rotates the screen, or you use any other application to do the same thing.
ed.dark said:
Hi guys
Does anyone know if there is a fix for this bug as mentioned on the Gyrator website help page? In fact, does anyone get this bug or just a special few??
Q. When I rotate to any new orientation, the phone application pops up, or the today/manila screen appears?
A. As you'll probably know, orientation is disabled by default on the Diamond, because the HTC developers are either too incompetent, or lazy, to build applications which are orientation aware. As such, strange things happen with either Gyrator rotates the screen, or you use any other application to do the same thing.
Click to expand...
Click to collapse
Yes, it is a PITA. I'm using a file called "rotator-netxscale-2003-4k-v420". It brings up a box on top of other apps to change the screen around. I have it programmed to the down volume button with AEBplus. The trick is never to switch the screen orientation while in TouchFlo3D. If you start your app first then activate the above program to change the screen it is all good, if you go to the TouchFlo 3D interface...it is not a happy camper. Unlike the normal WM Today Screen, TouchFlo3D Home is allergic to landscape.
I use Gyrator2, and TouchFLO is disabled by default in the settings, preventing it from being re-oriented if the device is turned. If you do a little searching, you'll find more threads that can help you configure Gyrator2 to stop the phone app, including incoming calls, from re-orienting. Plus, you can add any app you want in the settings. One I added was the Bubble Breaker game, which would restart a new game automatically if you turned the phone...
The same thing can also be done with MobileMagic.
Just deny auto rotation to the the apps that do not like
to be rotated or that rotate them self, like Teeter.
Thanks for the info chaps but i think that there is a bug in the system which SOMETIMES pops up the phone or manilla when i rotate an app (opera or tomtom mainly) from portrait to landscape using any method (gyrator, gsen or handymenu). It seems that these apps (phone, manilla) dont like any change of orientation even when they are in the background and opera or tomtom is rotated.
I have changed the gyrator2 .ini file to make no apps rotate except the ones i want to. Not even that works........
Any more help please?
http://forum.xda-developers.com/showthread.php?p=3044607#post3044607
Hmmm, donĀ“t have that Problem. Dunno why, but it works as it should.
Hi, just found a bug using gyrator on my new touch HD when typing a message in landscape mode. The dot (.) and comma (,) are inverted, so trying to type one of them gives the other as a result. Haven't yet tried without gyrator if the keybord gives the same problem, and will post it here later on.
Thanks
has anyone experience any problem when using S2U2 on X1? I can press panel key or Ok key then it will take me to the panel/today screen without slide to unlock.
S2U2 screen sometimes display abnormal
Please?
randy_c said:
has anyone experience any problem when using S2U2 on X1? I can press panel key or Ok key then it will take me to the panel/today screen without slide to unlock.
Click to expand...
Click to collapse
Same here. The Panelbutton as well as the Camera button still work in S2U2 lock mode. It doesn't concern me much, because it's essential that noone gets a phone call or music starts to play while the phone is in my pocket. If the panel-button is accidentally pressed nothing bad happens.
S2U2 screen sometimes display abnormal
Please?
Click to expand...
Click to collapse
This sometimes occured when I set the "Display Mode" to DirectDraw. Now I use RawBuffer and haven't had this problem for 3 weeks now.
Let me ask you a question:
When in landscape-mode and the phone is locked with S2U2 the button to slide reacts very slow. In portrait-mode the button follows the finger very quickly. Is it the same with your phone?
Let me ask you a question:
When in landscape-mode and the phone is locked with S2U2 the button to slide reacts very slow. In portrait-mode the button follows the finger very quickly. Is it the same with your phone?[/QUOTE]
I have the same problem. Maybe it's the X1
Thanks, so then I'm calmed First I thought it could be an issue of the picture I use but after a few different ones it was still the same. So it's not just my phone
that's interesting, with the exception of the landscape problem I wasn't aware of the x-panel and camera button issues. This is more likely going to be a fix / update needed for S2U2...
I have got the same problem.
S2U2 doesn't work correctly in landscape mode on my Xperia. The sliding thing and the whole program become very slow.
This problem doesn't seem to be solved yet.
I am wondering if its a Xperia only problem, otherwise in should have been fixed till now.
F-Styla said:
I have got the same problem.
S2U2 doesn't work correctly in landscape mode on my Xperia. The sliding thing and the whole program become very slow.
This problem doesn't seem to be solved yet.
I am wondering if its a Xperia only problem, otherwise in should have been fixed till now.
Click to expand...
Click to collapse
The Xperia always seems to be very slow in landscape mode no matter if I'm using the SE panel, the messaging application or touchflo3D. Very strange behaviour considering the display resolution stays the same.
It is partly a xperia specific problem. The panel button is controlled at a very low level in the phone. The panel button action is located in the registry, but that action is called from a low level. The button isn`t recorded by most programs.
A_C knows of this issue.
btw, you can disable landscape for s2u2. So it`s in portrait allways.
dekeijzer said:
btw, you can disable landscape for s2u2. So it`s in portrait allways.
Click to expand...
Click to collapse
Yeah, that's right. But then sometimes the screen messes up completely when I slide out the keyboard and the phone wants to change the screen mode. Also, I have problems with the dialer and S2U2. Sometimes the dialer screen stays on top but S2U2 locks the screen. There is no way to unlock the screen anymore because S2U2 is not on top but the dialer screen cannot be closed.
If this problem is Xperia specific, I will disable S2U2 in landscape mode. I always hoped they will bring a update which solves this problem.
The Xperia always seems to be very slow in landscape mode no matter if I'm using the SE panel, the messaging application or touchflo3D. Very strange behaviour considering the display resolution stays the same.
Click to expand...
Click to collapse
Yes i realized the same. I thought this would be a problem of Windows Mobile and not of the Xperia. If it is a Xperia problem, this is a big minus point for the phone.
It's a nice unlock system, but I have found that when I use this programme the battery loses power quickly.
was using ver 1.44 very stable for a long time
until i installed panel manager from r3a... same issues with panel button unlocking and ok button unlocking
upgraded to 1.62 and problems got worse...
downgraded to 1.52 and switched back to panel manager r2a for the time being.. which is ok.. b/c i rarely used the growing panel and the new cnn panel sucked anyway..
would love to have all the features of s2u2 1.62 but alas xperia doesn't quite seem to work that well with it
currently i have s2u2 set to ignore screen rotation and not unlock with keyboard slide out
my only real grief at this point is that it won't let me use slied to answer or just the regular answer keys with caller id turned on ... i have to turn it off and use the SE answer key completely unlocks my phone to display that message too so agravating...
A_c makes a kick ass program none-the-less ... !!!
same problem here. Also with last version no lock for panel button and camera button...
Camera and Panel button are known issues ...but not a problem for me either -as I do not see S2U2 as a "security focused lock" ...instead I see it as a "prevent accidental calls etc" type of lock
I still use the system lock with password if I need to "security lock it" (using a today shortcut that immediately invokes it, with password)
Must say I suffered some probs with v1.4 and v1.5 (caller ID & power drain)
But am using 1.62 without problems -it doesn't freeze on caller ID (I have it on window rather than full screen) and the battery drain has gone completely (uses <10% overnight for example, with G-alarm and data / active sync both running all night)
I found that it really was critical to uninstall, delete the S2U2 folder in program files, and delete the whole S2U2 tree in the registry ...and then soft reset -before installing the new version
I'm a huge fan of S2U2 ...its just awesome -without a doubt THE must-have app IMHO and always the first thing I install after a hard reset
I use S2U2 and have just upgraded to 1.62. Seems to be working ok so far, although no-one's called me since I upgraded so not sure of freeze problem :-(
(note to self: Get out more, make some friends ;-)
I find landscape doesn't work well at all with S2U2, but then I also find that with PointUI Home2, so maybe it's an X1 thing with particular software...?
The battery drain issue does seem to be resolved in 1.62.
I too am having problems with screen freezing when a call is received - the slider doesn't answer and since I had the buttons disabled there was no way to answer the call.
I'm still experimenting with other settings but I don't get many calls so it is a long process.
Still, a superb program and essential for me because of the problems with a magnetic case which causes calls to be answered just by removing the phone from the case.
jcsxda said:
Camera and Panel button are known issues ...but not a problem for me either -as I do not see S2U2 as a "security focused lock" ...instead I see it as a "prevent accidental calls etc" type of lock
Click to expand...
Click to collapse
Which means it can't even do accidental call prevention properly, as I found today. It's still quite easy to press the Panel button then the Call button in succession, as they are next to each other, especially if the phone's in a case. Result - pocket dialling, defeating the whole object of program. Shame really, as I've found S2U2 ideal on other phones.
Yep landscape is very slow ..... when i put ignore screen rotation on sometimes when open the keyboard screen goes all fuzzy... bitof a problem. But its a great program...sure it just needs some tweaks n bugfixxes for the X1
sweeet on v2.02 im no longer getting these landscape issues
Get my HD2 today upgrade to the latest rom and where is g-sensor support?? No landscape mode??
Euroman28 said:
Get my HD2 today upgrade to the latest rom and where is g-sensor support?? No landscape mode??
Click to expand...
Click to collapse
I've just checked and I have all the landscape / portrait switching in the laters 1.66 ROM that I had in 1.48. I know it's unlikely but could you have relied on an additional application to manage the switching that now needs to be reinstalled? Not trying to teach you to suck eggs just making a suggestion.
Regards.
cMMY69 said:
I've just checked and I have all the landscape / portrait switching in the laters 1.66 ROM that I had in 1.48. I know it's unlikely but could you have relied on an additional application to manage the switching that now needs to be reinstalled? Not trying to teach you to suck eggs just making a suggestion.
Regards.
Click to expand...
Click to collapse
just upgraded to 1.66 and have not made any changes and no landcape mode
Install BsB Tweaks
http://forum.xda-developers.com/showthread.php?t=589305
Yes using BSB will provide increased configuration options for screen rotation. I'm thinking though that, as the the screen rotation and Gsensor functionality is not disabled by the upgrade to 1.66 for me or others (I think there would have been more "noise" here if this was a "standard" anomoly experienced by others in relation to this update) perhaps there is a technical fault? Perhaps BSB would not be able to help in that case but you could always try. Screen rotation, landscape mode should work with or without BSB tweaks (to a greater or lesser extent). Maby HTC technical support could help if you can't get it working.
Regards).
mazzarin said:
Install BsB Tweaks
http://forum.xda-developers.com/showthread.php?t=589305
Click to expand...
Click to collapse
Would I be right in thinking that the problem is you can only go into landscape mode with certain things, like the photos and videos tab, or opera?
If this is the case, then you're absolutely right. Out of the box, landscape only works in a few places. It still doesn't work on Sense in general, even with tweaks that are available here.
Or is it that nothing works landscape for you?
johncmolyneux said:
Would I be right in thinking that the problem is you can only go into landscape mode with certain things, like the photos and videos tab, or opera?
If this is the case, then you're absolutely right. Out of the box, landscape only works in a few places. It still doesn't work on Sense in general, even with tweaks that are available here.
Or is it that nothing works landscape for you?
Click to expand...
Click to collapse
I get landscape in camera, photos, music and in Opera and Internet Explorer and then texting and emailing.
But no G-sensor turn then I access Windows start menu holding the phone in landscape position and generally the g-sensor only works then turning from portrait and tilting the phone to the right. Not to the left. the driver not fully implemented?
Euroman28 said:
I get landscape in camera, photos, music and in Opera and Internet Explorer and then texting and emailing.
But no G-sensor turn then I access Windows start menu holding the phone in landscape position and generally the g-sensor only works then turning from portrait and tilting the phone to the right. Not to the left. the driver not fully implemented?
Click to expand...
Click to collapse
It's software mate - nothing to do with drivers. It's just the way Sense works.
You'll need to use 3rd party software if you want to do anything other than "default" rotation (as you described), in the apps that you mentioned.
BsB Tweaks allows you to add applications to the list off "rotatable" ones. I've also done an app myself (see PLToggle in my sig), but that works differently. It's triggered by holding the call button down, and just toggles between standard orientation and an orientation of your choice (any of the other 3). It depends what you want to do really, but BsB offers the ability to rotate the screen when you rotate the device, but only in that 1 direction.
There are obviously other apps out there. I'm just giving you a couple of options.
Hope it helps
johncmolyneux said:
It's software mate - nothing to do with drivers. It's just the way Sense works.
You'll need to use 3rd party software if you want to do anything other than "default" rotation (as you described), in the apps that you mentioned.
BsB Tweaks allows you to add applications to the list off "rotatable" ones. I've also done an app myself (see PLToggle in my sig), but that works differently. It's triggered by holding the call button down, and just toggles between standard orientation and an orientation of your choice (any of the other 3). It depends what you want to do really, but BsB offers the ability to rotate the screen when you rotate the device, but only in that 1 direction.
There are obviously other apps out there. I'm just giving you a couple of options.
Hope it helps
Click to expand...
Click to collapse
Any idear why HTC choose to limit such a high-end device like HTC HD2?
Euroman28 said:
Any idear why HTC choose to limit such a high-end device like HTC HD2?
Click to expand...
Click to collapse
I don't think that it's a limitation. It's just the way it works. I guess it's a preference thing as it doesn't bother me.
I do know that most of Sense can't be rotated succesfully, but that obviously wouldn't stop them making auto-rotation work everywhere else. The option's there to turn on and off. I guess that's enough for most.
johncmolyneux said:
I don't think that it's a limitation. It's just the way it works. I guess it's a preference thing as it doesn't bother me.
I do know that most of Sense can't be rotated succesfully, but that obviously wouldn't stop them making auto-rotation work everywhere else. The option's there to turn on and off. I guess that's enough for most.
Click to expand...
Click to collapse
Just on way Manilla landscape and landscape then using the windows menus would have been nice
Euroman28 said:
Just on way Manilla landscape and landscape then using the windows menus would have been nice
Click to expand...
Click to collapse
I expect we'll see more of it in later versions of manila, but that's just a hunch.
Hi there! I have a problem with S2U2 on my I8000 Omnia 2. I installed it, and tried it. It's a cool program, but the call screen is not working to me.
----------
I also have new problems with S2U2. smile.gif I don't care about the sliders anymore, I was turned all off. But when my phone rings, and I press the answer button, the phones keep ringing and not do anything. I can't accept calls with S2U2. Is this a known issue or someone have an idea how to fix this? Or I should use an other app like S2U2?
----------------------
This messages copying modoco.
Try the latest S2U2 Release v2.30, works like a charm on my Omnia2.
Make sure to select RawBuffer as Graphics Mode. (Setting is located at Advanced S2U2 Settings page)
S2U2 was a real pain in the ^ss up until v2.30.
I haven't had any locking issues with the new version, but some serious battery drain have been spotted. I don't mind, since I have chargers at the car, the office and any other place I need it.
It takes like 13% percent of battery overnight when the phone sleeps.
Without S2U2 I can navigate with GPS for an hour for around 10%.
i am facing one serious problem when using S2U2.
original Samsung Omnia2 alarm does not work properly under S2U2.
sometime alarm ring properly. but sometime, only a very short "beep" then it stopped.
this happened especially during alarm in Snooze.
anyone know how to tackle this problem?
thank you in advance
Fire1986 said:
Try the latest S2U2 Release v2.30, works like a charm on my Omnia2.
Make sure to select RawBuffer as Graphics Mode. (Setting is located at Advanced S2U2 Settings page)
Click to expand...
Click to collapse
I am using WM6.1 and problem with s2u2 (LATEST) is that while it locks the screen nicely, it leaves the ans/end hard key exposed. This creates problem when I accidentally press them while taking phone out of the pouch. For that I had to have other arrengements as mentioned in this forum. If you had no such issues, then your OS must be of a different version. I hate machine specific softwares.
Not true
Out of all HTC snobs here at XDA, A_C is the one who really cares. V2.22 was blazinly fast updated to V2.24 because of dimming issue on ... thats correct - Samsung Omnia II devices. So talking about device-specific software about S2U2 is so wrong and unfair.
I am facing a different problem with S2U2..
When I am listening to music through Touch Player, the song gets paused as soon as S2U2 activates, then I have to press the lock key and then the song plays again
When S2U2 is not running it plays the song flawless..
Any settings I need to change..?
Khisha said:
Out of all HTC snobs here at XDA, A_C is the one who really cares. V2.22 was blazinly fast updated to V2.24 because of dimming issue on ... thats correct - Samsung Omnia II devices. So talking about device-specific software about S2U2 is so wrong and unfair.
Click to expand...
Click to collapse
But at the end of the day, it is not locking the ans/end lock keys which is a problem
Ps: I hv never owned an HTC
No need to use S2U2 now, I am using TouchLockPro, much much better, no more secondary gesture when power on, also the app is fully utilizing the G-sensor and the light sensor.
mokkimhong said:
i am facing one serious problem when using S2U2.
original Samsung Omnia2 alarm does not work properly under S2U2.
sometime alarm ring properly. but sometime, only a very short "beep" then it stopped.
this happened especially during alarm in Snooze.
anyone know how to tackle this problem?
thank you in advance
Click to expand...
Click to collapse
I had the same problem that was very annoying and some of the above too...The main reason I wanted s2u2 was because I didn't want the hardware key button answer call to be enable.Sometimes I was answering calls without knowing it because it was in my bag and with all the stuff in it the button was pushed by itself...From what i see samsung herself has slides for accept or end calls, why the hardware key buttons have to work too?Do you know any trick to disable them when the phone is locked...
Thanks i n advance!
I have the same problem with my Omnia.
Using latest S2U2 (2.43) and setting an alarm with the standard Samsung app.
I have tried most probably all combinations of s2u2 and alarm settings, without any luck.
Anyone ever found a solution for this ?
I am using the T-Mobile US version of the HD2.
Whenever I make a call the dialer screen stops responding to touch, that includes the entire screen, not only the dialer buttons (sometimes if I rub the button it will respond, but most of the times it won't).
If I press the home button during the call the screen starts responding to touch again, but if I go back to the dialing screen its stops working again.
If I end the call using the hard button the dialer screen starts responding to touch again.
I hard reset the phone and the problem disappeared and then after a few days started again.
The proximity sensor works fine during the call and turns off the screen if I place the phone next to my face and turns it on again if I move the phone away from my face.
Anyone has a fix for this problem?
i had the same problem with one of energy's roms, but with all the flashing and different cabs, i never isolated the problem.
flash and rom and install your cabs one by one?
do you have bsb tweaks installed by any chance?
Same problem here, HD2 T-mobile dialer not responding
Same exact problem here.
Using the US stock HD2 T-mobile ROM with HTC sense Today's plugin disable (using spb pocket plus, phone weaver and Pocket Breeze instead).
Once I initiate a call the screen stops responding.
I used Kaiser Tweaks to change the dialer to the "Windows Mobiel Dialer"... now, the screen works fine, but when dialing a number I can't see any of the contact information. Also, with windows mobile dialer the proximity sensor is not working, so my face keeps activating buttons on the phone now.
Need help here!!!
I have BSB installed.
Also have many other cab's installed, so can't tell when or which software caused this.
Also, when tried to enable HTC sense again... the phone crashes... tooke me another 2 hours of reset'ing untill I was able to disable Sense and revert to windows 6.1 today's screen.
Turn off the BsB Tweak "tap time". That causes this problem.
johncmolyneux said:
Turn off the BsB Tweak "tap time". That causes this problem.
Click to expand...
Click to collapse
IT WORKED!!!!!!!!!!
The HD2 dialer is working again
Thank you!
Any idea why the WM dialer is not showing the contacts?
The fix worked, but...
That fix worked, the problem is I like the tap delay setting. without it I launch programs by mistake almost all the time while scrolling.
I tried to play with the registry value the fix changes:
HKLM/System/GWE/Touch/Filter/Minimumtaptime
the initial value is 0, the tweak changes it to 30, I tried lowering the value all the way to 10 and still every time the dialer screen stops responding while talking on the phone. It works fine once the value is reset to 0.
Does anyone know how to change the tap delay and stop the problem from happening? The answer might be found if we know why does it only happen in the dialer screen? Maybe there is a registry value for the dialer that is causing a conflict.
Thank you johncmolyneux!!! Enabled this recently to see how it worked and noticed the dialer stop responding, searched the forums and found this. Thanks!
Works like a charm!!
thanks, been looking for that for a long time...
changed BsB tap settings to off, soft reset, and now the HD2 touch screen works again during a call, so I can use the speaker and dialpad
Thanks a lot, Worked like a charm for me! Strange thing to include that tweak in BsB though - maybe works for other models/ROMs..
Heartfelt thanks
I recently updated my stock ROM and encountered this problem. After searching the forums I found this solution. MANY THANKS Mr M!