I'm having a problem with Fring on my Jade
the program can't find wifi connection even its connected
any suggestion?
yeah, don't use it.
use Pigeon: http://getbest.ru/
Thank You!
Related
Hey, perhaps I am blind, but I can't find anything here that would help me.
I am looking for a Software that helps me controlling my Mobile Device (HTC Touch Diamond) from my Computer, via LAN, Bluetooth, best would be over Active Sync - USB
Does anyone know there something helpful?
Thanks a lot
My Mobiler
Please have a look under www.mymobiler.com
Thanks! This Software is great!!! Better then I expected!
this is pretty coool! ashame the lag when textin from the laptop
you may wanna check this out
http://soti.net/
remote control via internet
hi guys,
perhaps I am blind too, but I can't find anything here that would help me.
I am looking for a Software that helps me controlling my Mobile Device (HTC Touch Diamond) from my Computer, via internet. I search a software like VNC but working in reverse!!! So, i need to run a program installed on my diamond while the phone is several miles far from me
Does anyone know there something helpful?
Thanks a lot
P.S. sorry for my english....
Use VNC server (pocketvnc) instead of client.
vnc connection problem
hi HwangPL,
thank you very much for your replay. After your post i've downloaded pocketVNC server version 1.4.2.0(demo version), but i'm not be able to use it. The vnc client on my pc says "connection failure". I think I'll go crazy before sunday......
If you or anybody else have a solution please post it!!!!!!!!!
Thank you one more time.
Try to use old VNC Viewer on your PC. I cannot connect when my mobile phone uses GPRS connection, but it works with WIFI.
I cannot test it right now, cause I don't have any WIFI connection (it surely worked some time ago).
I'll try to test it tomorrow maybe
I think there are a lot of problems with the type of connection. I use a hsdpa connection with my diamond, while my pc is connected to internet with another mobile phone that works with an umts connection. I'm not sure how to configure the firewall. However i'm not sure how to configure the tabs of vncpocketserver. I think that's why i'm not understand very well english (i'm italian) and on the web i didn't found anything wrote in my language.
So, you are my only, precious, last chance......
CIAO
I think there are a lot of problems with the type of connection. I use a hsdpa connection with my diamond, while my pc is connected to internet with another mobile phone that works with an umts connection. I'm not sure how to configure the firewall. However i'm not sure how to configure the tabs of vncpocketserver. I think that's why i'm not understand very well english (i'm italian) and on the web i didn't found anything wrote in my language.
So, you are my only, precious, last chance......
CIAO
OK. I used vncserver v.1.4.5.0 demo, on my pc VNC Viewer Enterprise E4.5.1 via WIFI (on mobile as internet connection) and it worked. Goodluck!
hi, i came back!!!
Finally i've found the solution. The problem is the IP address. My operator doesn't give me a public IP but a NAT address. This is a very big problem because the phone can't accept any type of connection by the web. Fortunately i found a beutiful program called "Hamachi" that works on both the computer and the PocketPC. So i resolved my problems.
Thanks very much to all for suggestions.....
Hey there,
I am having i think a small problem with both SOTi and My mobiler.
I Have a Touch diamond and when i am seeing the camera on the PC all goes black in PC preview, but on device i can see the camera images.
Can anyone help.
Brgds
Hi
Strange nobody else having same problem.
I believe the reason with the no preview its due to the autofocus, can anyone check on this.
Tks in advance
Jeyo Mobile Companion 2.1
Have installed Tom Tom software which works OK but evertime I use it it makes a data connection via Edge or gprs.
How can I stop it?
The same thing happens if I have a wifi connection to my network it also tries to connect via Orange.
How can I stop this as I do not want an unwelcome bill in a while?
If it means disabling something so that I can not connect to internet via gprs that would be fine but seem to be unable to find a setting.
Thanks
Hi
I no expert but sounds like AGPS kicking in. Do you have Location Settings option in "Settings\System"? If yes you can turn this off, if not then dunno, maybe someone else can guide.
You could also install the "HTC No Data" utility, search the threads here or Google it.
Cheers
Proper Job!!!
Seems to have stopped it dialling up with TOM TOM
Just need it to not dial up when using wifi now.
You may wanna try searching for and installing MoDaCo NoData... Works great for me...
Sussed it.
In network settings instead of havung it set to Orange Internet set it to Work Network and works OK.
Proper Job.
izzyzc said:
You may wanna try searching for and installing MoDaCo NoData... Works great for me...
Click to expand...
Click to collapse
Yep, NoData is a great app.
Blocking the internet connection. And saving some battery..
Hi,
I need to install either Fring or Nimbuzz on my HTC Touch Pro 2 so that I can receive VOIP calls. I installed fring, however it is unable to connect to WLAN. I turned off all the security on my router and it still couldn't connect, so I'm guessing that fring does not yet support this phone.
The touch pro 2 was not found in the list of Nimbuzz's supported phones either. Has anyone managed to get this phone to work with either Fring or Nimbuzz? If not does anyone know of a suitable alternative?
Nimbuzz
Hi Darrenultra.
I have Nimbuzz working fine. Haven't had a chance to test VoIP calls though.
I have Fring working and VoIP configured too on 3G as well as WiFi. No probs.
Fring is what I would really like to get working ....glad to see that it is possible.
Did you download Fring directly to your phone by visiting www.fring.com/cab? Or did you do it some other way? I'm wondering if I maybe there are more than one Windows Mobile versions.
Fring seemed to install fine for me. However it is unable to find either my Wifi connection, or that of my neighbours. Instead when I try and start Fring I get a screen which says:
'Please Select Connection
Search for WLAN...'
However no WLAN is ever found. Any suggestions as to where I'm going wrong will be most welcome.
...there is one other thing that I forgot to mention.
I'm a bit worried that even when I do get fring working it is going to encounter some problems. The Touch Pro 2 tends to go into standby mode after sitting around for a minute or so. Will it still be possible for me to receive incoming calls on fring when it is in standby?
Any ideas?
I guess you must have tried the standard route of un-installing Fring and then soft reset and then re-installing Fring?
I would say turn your wifi on, launch Pocket IE. Go to fring.com and download the cab file directly. Install it. It will (should) sense the WiFi connection and take you further.
Hope this helps.
darrenultra said:
Fring is what I would really like to get working ....glad to see that it is possible.
Did you download Fring directly to your phone by visiting www.fring.com/cab? Or did you do it some other way? I'm wondering if I maybe there are more than one Windows Mobile versions.
Fring seemed to install fine for me. However it is unable to find either my Wifi connection, or that of my neighbours. Instead when I try and start Fring I get a screen which says:
'Please Select Connection
Search for WLAN...'
However no WLAN is ever found. Any suggestions as to where I'm going wrong will be most welcome.
Click to expand...
Click to collapse
I've got the same problem... I guess just have to wait for updated version of fring before wifi issue can be solved.
I removed Nimbuzz because I found it chewed through my battery - it was insane. I could get through 1.5 days on a charge, but with Nimbuzz, I'd be looking for a powerpoint by midday on day 1. Love the app but not at that cost!
go to nimbuzz web site.choose your phone az touch pro..it work fine on pro2.no screen size problem..bud i didn't use VOIP calls yet.
I installed fring v3.35.3.248, works well... give it a try... http://www.fring.com/versions/#Windows
Hi guys
My girlfriend has a palm treo pro but she has a problem and i was wondering if you could help her out cause i am not able to.
She can't connect with internet explorer to the internet. I have tried all the connection setups provided by her provider but it still isn't working. although she CAN send e-mails and receive e-mails and connect to windows live messenger.
Is this a registry problem or am i still configuring some stuff wrong.
plz help
with kind regards,
kuraki
It doesn't work on either Wi-Fi, or ActiveSync, or Data?
nope. wifi not working either. can you help us?
Have you tried using another browser like Skyfire or Opera? Give them a shot and we can see what happens from there.
Hi all,
my Facebook mobile from my new HD2 doesn't work via Wifi, only work via GPRS connection... anyone have similar problem??? and anyone know how to fix it???
Any help about will be welcome.
You are turning WiFi on first yeah?
Mine works fine.
someone knows how to fix it?
If i have facebook on in the background I sometimes have to exit it then run it again for it use wifi. Especially if I have just taken the phone out of standby.
Hello,
I am having same problem. I connect WIFI and then I open Facebook (1.4) and then I see the GPRS connection starting.
Any twaek to do here?
Thanks