Hello Guys,
I'm having a strange problem with my earphones...I have the Elfin with the original rom...when i connect my earphones with my phone...it automatically diales the first number and sometimes even voice commander opes on its own..I am able to listen to songs and the volume is perfect...but after some time it automatically diales the first number and it is really irritating......
Plz help me guys...Thanx...
hi i'm having some problem with volume adjustment on my HTC Touch. I own a HTC touch which i recently upgraded to Windows 6.1. After that i'm facing a problem. With every call- either incoming or outgoing i've to increase the volume of phone by sliding up the volume key. With windows 6.0 it wasnt there. Any body has a solution. Plz help.
hi i'm having some problem with volume adjustment on my HTC Touch. I own a HTC touch which i recently upgraded to Windows 6.1. After that i'm facing a problem. With every call- either incoming or outgoing i've to increase the volume of phone by sliding up the volume key. With windows 6.0 it wasnt there. Any body has a solution. Plz help.
I have exactly the same problem as above. Any solution?
Some1 help us plzz.....
same problem, both with wm 6 and 6.1.
very low voice with the wired earphone but not with the BT earphone
I had the in-call volume issue with the original ROM..I have now upgraded to Onyx ROM and this issue is now solved.
for those of you who dont want to flash a new rom to your phone:
backup ALL of the data on your phone (files, contacts etc) & do a hard reset
you do a hard reset by pressing the reset button and then holding down the red & the green key. Then follow the instructions on screen.
Hard resets are good for sorting out little problems sometimes
Related
Hi chaps,
I have a SPV M500 but for some reason it is very quiet when on the phone. In a busy street I can barely hear what the other person is saying. I have put the volume on maximum but still very quiet. Is there anyway I can make it louder?
Also, I can't figure out why the 4 buttons surrounding the cursor button locks from time to time preventing me making calls for no apparent reason but I can still use the cursor and the touch screen. This usually occurs after I've synchronised my phone or I have left it for a while.
Any ideas?
Cheers
you might want to post this in the Magician forum since that is what the m500 is. (its a bit more busy in there)
volume slider
Just slide this button up during a call. You should here the volume going up
edit/don't know why image doesn't show, but click it and it does
Thanks I know about the slider, it is on maximum but it is still very quiet... I have no idea why.
Sorry moderators, can you please move this to the Magician section please!
thanks saldous.
always best to try the simple things first. What's it like on speakephone (hold down the (green)answer key).
Was it loud before? Tired a soft reset
furby said:
thanks saldous.
always best to try the simple things first. What's it like on speakephone (hold down the (green)answer key).
Was it loud before? Tired a soft reset
Click to expand...
Click to collapse
Speaker phone works fine. Thanks I didn't know it is activated by holding down the green button!
I've only had the phone for a week, its always been like this but just wondered if anyone knew how I could tweak it to make it slightly louder.
Would a soft reset wipe the memory etc?
soft reset doesn't wipe the memory; it's like rebooting windows.
Hard reset will wipe all memory, like formatting your harddrive (although windows is still there, but "reset" to factory settings)
Are you turning up both sliders on the volume control. There's one for windows and one for the phone.
There aren't really any tweaks to increase sound volume, but it's not very loud to begin with.
V
earpiece problem
also im using orange spv M500....it has that fault mate...the problem is with the speaker...thats too week so itz hardware issue cant help..
But still u can do some registry tricks...
install resco explorer to do it...
go to registry editor
find...-HK curr user-controlpanel-sound categeries-Incall-init volume set to 15
Hi everybody,
I have this one problem. After 2 days of usage, my Hermes suddenly went mute. No vibration or screen click can be heard even If I changed it to the loudest. I missed a lot of calls and sms due to this problem. The only way to solve this problem that I employ is by soft-reset my device.
I really hope somebody can help me tracking to root-cause of this problem and in the same time providing or proposing a solution to it.
Kindly help. Regards
morisa
Device: DoPoD 838Pro
did you unmute it from the speaker icon ?
if you have a backup restore it if not do a hard reset just make sure you backup your contacts/ stuff first
Phone goes mute
I think I'm having that problem too. Just out of the blue it happened. Didn't install anything extra the whole week. But when someone calls it rings, and if it's missed, it doens't play the miss call tone... or any other sound in that case.
darky said:
did you unmute it from the speaker icon ?
if you have a backup restore it if not do a hard reset just make sure you backup your contacts/ stuff first
Click to expand...
Click to collapse
Hi,
I noticed that the problem started to happen when I long-press the "Green" Button to activate the speakerphone during a call instead of pressing the "Speaker On" menu on the screen.
I've no idea why but maybe that could be the problem. Presently, I have to press that "Speaker On" on-screen menu to activate the speakerphone to avoid this problem.
Maybe other users can confirm this problem.
Regards,
morisa
mmorisa said:
Hi,
I noticed that the problem started to happen when I long-press the "Green" Button to activate the speakerphone during a call instead of pressing the "Speaker On" menu on the screen.
I've no idea why but maybe that could be the problem. Presently, I have to press that "Speaker On" on-screen menu to activate the speakerphone to avoid this problem.
Maybe other users can confirm this problem.
Regards,
morisa
Click to expand...
Click to collapse
Got the same issue here and I don't use speakerphone
my pda´s auto mute so
No sound although speaker icon no in mute
I have the same problem. Out of the blue no sound is heard at all. I tried changing volume but it did not do any thing. Had to shut down (not soft reset) and restart device and it works fine. This happen several times and I can figure out why it does this.
If anyone can help...
Tal
Same here, I'm using a X01HT Softbank variant TYTN flashed with the latest HTC WWE rom and after about like 12 hours of use the device goes mute for some reason, making calls it works perfectly but playing sounds or ringers the speaker does not work. Anyone have any ideas? I'm thinking of maybe re flashing the device since most of my information is on my storage card. I'll see if that fixes the problem :-\.
same problem here....
Same here. Only a reboot fixes it.
I have the same problem but it only happens when using the speaker phone. After the call ends, then there are no more system sounds etc. I then have to soft reset, which pisses me off as I use the speaker phone plenty in the car.
If i dont use the speakerphone, then there is no problem. Kind of strange....
Has anyone got any ideas on how to solve this?
I have same problem. I thought it was software related, but seems that it is caused by the speaker phone. I had the exact same problem with my old IPAQ 6515. It must be a software issue with WM although the 6515 had WM2003SE and the TYTN has WM5 so I do not know. Really annoying though as I use this phone for an alarm and it never goes off because the sound turns off sometime while I am sleeping - Uhggggg!
I also have the problem. Only a Softreset brings the speaker back to live.
my new problem...misery loves company
same here; curiously 2 pages into this thread and there are no real solutions.
I have solved the problem on my TyTN.
The Midlet Manager is the root cause for the Phone Mute issue on my device.
lol I just started getting this issue out of the blue after a couple of months and I didn't install anything :|
yeah nothing but a soft reset brings the sound back
Happens to me too. Strange coincidence - I've just checked my m3100 and it's giving me the silent treatment now. Time for another soft reset
I never use Midlets, so that rules the above theory out for me. However my battery was almost dead. I was using WiFi at the time, which turned itself off when the warning notifications popped up. Maybe when the battery drops below an acceptable level it turns the sound off to save power, but doesn't restore it after charging?
nope it happens to me even if my battery is fully charged
this used to happen on my i-mate PDA2k, and my JasJar (Universal) running both WM5, AKU3.2, 3.3, 3.5 and unfortunately even WM6 :S
Hi All,
After checking and testing the phone. I found out that the only way for me to solve the muting problem is by silencing the notification sound when a new email arrives. Since I have an unlimited EDGE/GPRS, my push mail is working around the clock. Thus, by not having the new email sound notify, the muting problem gone. This is caused by the notification event locking up the sound and not releasing it even after I read the mail. Previously the only way to resolve is by soft-reset but now, no more.
I have no idea whether this work or not for others but you might try and post your solution here.
Regards,
morisa
Hi All!
I've recently bought the device. It's really cool, but there is one big problem.
When I call, party can't hear me. Mic volume is too low, even if i talk right into the microphone, speech is not high quality. But when I run voice recording, all is very good, so the problem is not in a hardware mic.
I've tried to upgrade several firmwares, but don't know which one should help me. The new one did not fix the problem.
Any thoughts? Maybe soft or registry key?
yes..
im also facin the same problem.. huhu cud anyone help?
yea!
i just followed the steps to update rom, walla prob resolved! but unfortunate i updated with imate rom 1.12 though, no pdf n ppt viewer preinstalled huhu
try with the pressure of 10 seconds of the green key when you call.
i had the same problem!
Hi All,
I was wondering anyone out there is experiencing the same issues as myself and hopefully can tell me how to correct the problem.
If I install a cooked WM 6.1 ROM (could be any number of them, ceM, NIAX, etc) the volume through the earpiece (not BT headset or wired headset) is terribly low (to the point I can't use the device). I have configured the volume to be FULL (high) but still it's impossible to hear.
If I install the OEM WM 6 ROM from HTC (or Dopod) the volume is A LOT louder (but not necessarily great quality).
Can anyone tell me where the settings for volume might be contained in the Registry or otherwise? I have tried various changes under HKCU\ControlPanel\SoundCategories\ but nothing seems to flick the switch, so to speak.
Any help would be greatly appreciated.
Regards,
WC
+1
Almost same problem here!
I wish to rise the volume of the internal speaker!
It is a matter of registry,or what?
Thanks in advance.
Regards
My solution
hi,
I had this issue also, then i found a solution which worked for me, will be glad to share, extract the attachment into windows folder and the shorcut in startup folder, soft reset couple or three times and chek if its worked. be carefull all files are hiden so be sure to select (show all files in the files explorer, the same as in your computer)
here http://forum.xda-developers.com/attachment.php?attachmentid=128582&stc=1&d=1226249651
let me know.
thnks
thanks for sharing
I'll let you know...
Masalism,
Thanks for your post, I have given it a shot and get the following result. The volume is definately louder, but I have no volume control with the jog dial on the side of the phone. Also the quality in the earpiece is quite distored, possibly from the volume......?
Many thanks for your suggestion, if you have any other ideas, I'm all ears.
(to the Mods, apolgies for posting in the wrong section)
WC
Update:
Hi All, I have discovered that "Schaps WM6 4.30 ROM" http://forum.xda-developers.com/showthread.php?t=355506 has, for me, the best volume level and control.
Just thought I'd share my findings.
WC
WangChung, still the problem remains! Anyone know how to solve this problem without trying several Roms?
incoming ring
Additionally - I hear no incoming ring whatsoever in the earphones. The phone is ringing according to its settings, but I do not hear it independent wheter or not I am listening the audio player (core, win) or not.
im in the same boat i guess
sir, my phone speaker is automatically switching on for incoming and outgoing calls,but not showing speaker symbol, and ear phones also not working .i tried hard resetbut nothing change. please anyone give suggestion
I too get this problem
Not really sure about the solution, but i have a simple work around that works on my p3400 WM6.5
1. Mute the phone (system as well as ring)
2. Restart