Related
Hi to all in this forum.
I have one T-Mobile MDA Compact II PM200. In this forum i hound that his name is Charmer. I try to unlock it with Lokiwiz03a. Program give me a code but device says that code is wrong. I try with other software to unlock it and after that mobile work with SIM card but no signal
I reflash mobiele with WM6 founded her in the forum, not it have English (before have German) but again no signal. I try now to unlock it with Lokiwiz02a and choose CID unlock. Again no signal.
When device in Automatic search mode no found network. If in Manual mode found but unable to register in network. When i put mobile to my computer speakers no outgoing signal from mobile that's not normal.
What is the problem ?
Can onyone help me with information ot needed software ?
In moment mobile information is:
ROM version: 10.2.0.8 WWE
ROM date: 2/03/07
Radio version: 01.12.20
Protocol version: 4.0.13.23
Identity:
Model No.: WIZA200
Platform: PocketPC
IMEI: 35703700051525500
Hardware:
CPU: OMAP850
Speed: 195 MHz
...
I try to found information about this problem here in forum but w/o result.
10x in advance
Did you try to flash a new radio? 2.69 or 2.19?
No.
I found this files:
BREEIMG.zip
breeze.zip
inside breeze.zip are:
SSPL.exe
spl
breezessplv1.nb
inside BREEIMG.zip is:
BREEIMG.nbh
is this needed files for radio flashing ?
if not then what files I need to try with other radio version ?
I download Radio from ftp on this form for Prophet. And try with Prophet_G4_RadioRom_v2.47.11 but now mobile not start. Go to splash screen and after few seconds restart.
I try to put it in bootloader mode but ActiveSync can't make connection and for that flash software can't wreit new radio or flash into mobile.
I ry with:
1. dowenload this t-mobile official rom (http://www.tm-phonedownloads.com/files/RUU_Compact ll_2060227_20602110_021921_T-MobileUK_Ship.exe)
2. enter your Charmer into bootloader mode by pressing power + camera + reset, let go of the reset, but keep holding power + camera until the three colur screen will show up (that is bootloader mode).
3. connect the Charmer to your pc (make sure your battery is fully charged)
4. run the t-mobile rom.
5. good luck!
but ActiveSync can't make conection.
?
If you are in bootloader Active Sync wont make a connection. Just plug in the usb cable into your phone while in bootloader and run RUU.
Cheers,
vlodeck.
I try with this 2:
1. T-Mobile official rom RUU_Compact ll_2060227_20602110_021921_T-MobileUK_Ship
2. Prophet_G4_RadioRom_v2.69.21
T-Mobile official rom RUU_Compact ll_2060227_20602110_021921_T-MobileUK_Ship
===================================
inside are this files:
EnterBootloader.exe
nk.nbf
README.doc
ROMUpdateUtility.exe
RUUGetInfo.exe
RUUResource.dll
Prophet_G4_RadioRom_v2.69.21
========================
inside are this files:
EnterBootLoader.exe
nk.nbf
ROMUpdateUtility_G4.exe
RUUGetInfo.exe
RUUResource.dll
phone not start normaly. just start and after 5sec restart. i put it in Bootloader mode (press Camera, Power_buton and Reset. then release Reset and after few sec. mobile goto in Bootloader mode). when conect USB cable ActiveSync not find mobile and this file not make upadte/conection: ROMUpdateUtility.exe and ROMUpdateUtility_G4.exe
if I try to start RUUGetInfo.exe windows says that this is not valid Win32 application.
then what RUU to start ?
how to flash other Radio into this mobile or to reflash it again to be alive ?
anyone will help me for my problem ?
in moment when i start my pocetpc it displays:
IPL 1.12
SPL 1.12.0000
OS 10.2.0.8
the row GSM .... missing.
in moment i can't make connection with ActiveSync. then how to flash again mobile ?
now i try to flash it with RUU:
http://www.tm-phonedownloads.com/download_manager_mda_com2.html
http://www.t-mobile.de/downloads/?r...ku3.3_38222_382117_026921_tmo_de_ger_ship.zip
but it gives a error
i try with this:
http://www.my-audio.net/xda/Univers...s/Universal_Upgrade_v1.30.68_radio_1.09.0.zip
but when software start flashing says that this Utility is not for my device and to find right
?????
I'm guessing that this universal radio upgrade is for universal
Download this:
http://www.mobione.pl/pliki/ruu_252_eng.zip
Extract it, copy the .nbf of the rom you want to upgrade your device with to the extracted RUU folder. Once copied - run RUU.
P.S. The problem with your device is that you have upgraded wm6 on 1.xx bootloader. Thats why the system doesnt start. If the method I described above doesnt work. Post me.
Cheers,
vlodeck.
now i can bootloader mode,
i did it but got this error while i upgrade my rom to newest rom 3.3...
i got this "invalid command 326": please check your NBF data, this NBF data cannot be used for your PDA Phone.
hi again to all
after long time i try to play agian with this brick-PM200 that haven't signal.
last time (before more 2 years) i write ROM and after that PM200 not start, only in Bootloader mode (3 color lines).
today i revive it when flash this:
HTC_charmer_upgradeut_noid.rar
(
EnterBootloader.exe
nk.nbf
ROMUpdateUtility.exe
RUUGetInfo.exe
RUUResource.dll
)
PM200 start, in begin fave full signal. after 30-40 seconds signal gone (but not test in/out call). i try to restart mobile, try hardreset, try manual search on operator - all no result.
on start i put near radio but power amplifier not work. i think that this is harware problem.
but not 100% sure.
is possible this problem to be from wrong radio settings ?
i try to write different radios for Prophet but every time get message "Invalid tool" and radio flashers stop.
i try with universal radio thata Vlodeck says but again this message.
what to do ?
before two days i repair one HTC Touch Elf100 and read that can sniff USB comunication to check Vendor ID and other ID.
but in my PM200 this not work. on Elf100 work easy like is writed here in forum.
when start wyty (or what's name is) make connections with mobile but after write:
ruurun 0
says that need password. if try with password for Elf100 not accept it.
what is the password for Charmer (PM200) ?
or if there is other way to get Vendor ID and other ID how ?
I can help you maybe. You need to downgrade to Aku 2.2 using the original utulity. Then the Radio will be downgraded too. But nobody knows the exact way on how to do that. (Maybe Vlodeck knows that?) I'll try to get it this week and tell you then.
As for the password try CHARMER. I have never been able to test it with MTTY cause I don't get in the right mode but I think the olny possibility is CHARMER. Just try it with whatever tool you want.
Hope that was helpfull
10x for answer.
next day will test password and post result.
how to downgread to aku2.2 ?
if you find solution please post it.
today i try but w/o success:
Cmd>password charmer
Cmd>ruurun 0
Cmd>getdevinfo
Invalid command : getdevinfo
For a help screen, use command ? or h
Cmd>
i try and with passwrod CHARMER. result is same.
what are commands for MTTY that supported Charmer ?
OK you have the same problem I have. You have Cmd> in the window. To get the comands and the password working you need USB> instead of Cmd>. That is the same problem I have and I don't know how to fix it.
in moment i use MTTY 1.42
before 3-4 days i repayr one HTC Touch Elf100. and this MTTY work find. no problem that write CMD not USB.
terminal show CMD> i write commands and mobile answer w/o problem.
but in my Charmer not answer.
possible reason is access password. but not sure.
There are simple comands. And for them you don't need SuperCID. I tried them and they haven't worked too. So I think there is something else with it. Maybe the Bootloader locks all comands and you need a password for that too. But I don't know about that.
@ChrBeck
you try to make SuperCID SD card to have full access to mobile. and after that to try flash it with RUU ?
next morning will try this.
p.s. now find this:
http://www.tm-phonedownloads.com/
http://t-mobile.iris-global.com
Well, we can't SuperCID and Security unlock a Charmer with a bootloader over 1.x at the moment. This is surely impossible. That won't work using a SD Card too. So I think you will not have any luck.
Brother i am upgrading my device it stoped at 2% now its dead only goes to bootloader show
ipl 1.81.00001
spl 1.81.00001
i master reset but nothing happened i flash all roms on wiki nothing happened always say invalid tool
i need this rom because this has previous this
Rom version 1.8.415.2 wwe
Rom date 11-3-06
Radio 02.71.90
protocol version 4.1.13.31
EXT Rom 1.8.415.102
Thanks in advance who help me in this case
I have another set of that how can i read other set rom and flash in to that set
Was it CID locked? did you buy the phone r did you get it with a subsciption?
oddball1 said:
Was it CID locked? did you buy the phone r did you get it with a subsciption?
Click to expand...
Click to collapse
Not it is Not Cid locked & Also Not Sim Locked.. yes i buy from a shop in pakistan but when i upgrade i get problem
I also have bricked my Herald after upgrading to Aserg but nothing now ,,only green screen and off ...
it was CID locked
from Mobinil Plz Help
zubi1984: i had the same problem.
try mtty.exe (use wiki), and try the commands for it.
if it says something clearly, then you can -somehow- unbrick your device.
if it gives error..
-this happedned to me-
you should bring it to the service, with warranty.
if you are lucky, they will fix it to you without price.
i hope you have warranty, because the man in the service said that i really fuc*ed it up... the new motherboard would have been very expensive.. without warranty
so first of all, calm down, and let's start reading about the upgrade, read a lot, and go to another forums, maybe somebody can help to you unbrick your device
____
my device said:
error 30* invalid upgrade tool (for any roms)
only in bootloader mode running
hard reset failed
reset does not works
no charge lights on charge
mtty.exe error, commands: no answere.
pulyka
Hi pulyka, Can you Please tell me about commands for mtty.exe..what to write inside te command box exactly ,,
any more details about "mtty " would be thankful
for me:
Cmd>info 1
Invalid command : info 1
For a help screen, use command ? or h
Cmd>info 2
Invalid command : info 2
For a help screen, use command ? or h
_____________
this is wrong.
___
read it carefully!
http://wiki.xda-developers.com/index.php?pagename=Hermes_BootLoader
try it, but in your own risk..
unfortunately i am not an expert in this..
some people helped me in a hungarian forum.. and they said, my pda is bricked completely:S
if mtty working properly:
sb
I already connect to USB!
Cmd>info 0
GetDeviceInfo=0x00000000
Wizard
Cmd>info 1
GetDeviceInfo=0x00000001
2.21.0000
Cmd>info 2
GetDeviceInfo=0x00000002
+ SD Controller init
- SD Controller init
+StorageInit
***** user area size = 0x1EB80000 Bytes
HTCSWIZTMO07 â-r€HTCE
Cmd>info 3
GetDeviceInfo=0x00000003
this is died device:
info1
Invalid command : info1
For a help screen, use command ? or h
Cmd>info 1
GetDeviceInfo=0x00000001
2.24.0000
Cmd>info 0
GetDeviceInfo=0x00000000
Wizard
Cmd>r2sd all
***** user area size = 0x1DE40000 Bytes
R2SDBackup() - Download type = 5
usTotalBlock = 1 sizeof(SDCARD_SIGNATRUE_TABLE)=512
GetDeviceCID: Error - InitDecoder
GetDeviceCID: Error - InitDecoder
You didn't get the proper security level to download a specific image
Cmd>
pulyka
I have an HTC Innovation, Qtek 9100...also wizard i think, Os: 1.1.7.8
GSM 1.4.10, SPL 1.01, Ipl 1.01, The language is in french.
I want at least to change the language to english, but i want it also a little updated.
I don't know what g3, g4 means and how to find out what version i have.
Please tell me where to begin to upgrade the phone, here are to many post and are some terms i don't understand like g3, g4, ipl, spl.
I don't think the phone is locked.
I also have vista
Thankyou and please guide me a little.
Start Here
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
You have a G3 device
Here is a link to flash an english rom to your device
ftp://xda:[email protected]_9100_RUU_Prodigy_10107105_Qtek_WWE_ship.exe
it is not an upgrade basically the same as you have now but in english
here is a link to all the files you need to unlock the wizard both sim unlock(any sim card can be used) and cid unlock( You can install any rom)
http://rapidshare.com/files/53377946/Wizard__CID___Sim_Unlocker.rar
password for rar file is scousemartin
Once you have all this installed, you can flash any wm5/6 rom available for the wizard
thankyou, u've cleared things up for me ...
just how u know that is ia g3 or g4, g i think g stands for generation right??.....
found the info from the links...thanks again..
lanst question, after u what is the best wm5/6 to install onto the wizard? what rom posted here? i see here some tnt rom, are they good?
I use tnt 1933 from here and have no problems with it ,i would use radio 2.19 as well,as people have issues with missed calls etc, a link for that is there too
I know you have a g3 as your ipl and spl are 1.01 if it was a g4 it would be 1.01.xx
http://forum.xda-developers.com/showthread.php?t=341550
download links are located in post 3
you know what is not working? the link to the original wwe rom, from the ftp, looks like it is not there anymore!? can u verify that? or is my computer the problem?
yes i have just checked it isnt available anymore, in fact none of them are there anymore. download my wizard unlock pack and unlock the wizard with lokiwiz2b how to is here http://forum.xda-developers.com/showthread.php?t=249474
hope this is my last question!
What i have missed or what am i doing wrong?
so, i installed the rom from your unlock archive and it is ok, my wizard is in english now
i tried my simcard and it works so that results that my phone is not sim locked so i didn't use any of the sim unlock tools.
now i try to flash the tnt rom and gives me : error 295 and says something like imposible to use on your device and says to use some newer nfb file
...and what is the extended rom?
now i am reading: You MUST have an IPL and SPL at 2.xx or higher (BOTH not just one or the other).
so this means i can't install this rom if i have ipl spl 1.01?
reading a tutorial while updating this post!, so i red that i have to install a tmobile rom before i can install any rom? is this true?
Which rom did you install the button rom? or the o2 rom?
if it was the button rom did you follow these instructions
1 - Unzip lokiwiz.zip to a folder on your desktop
2 - Copy EnableRapi.cab to your Wizard
3 - Execute the EnableRapi.cab in your phone. Wait for it to finish
4 - Guarantee that your phone is connected via activesync with the computer
press the windows key + r and type cmd and press enter to get a dos window,that way when lokiwiz finishes you will still be able to read what it says
5 - Click on the black dos window that has opened and type cd desktop then type dir /ad and then a list of all the directorys on your desktop will be shown then change directory to the lokiwiz2b directory and Execute lokiwiz.bat (on your computer!)
Extended rom is what it says, a part of rom that is in an extended partition, basically it contains customisation programs and important files for installing into the wizard when it is hard reset.
when you say you tried your simcard ,was it the same provider e.g. o2 that you were using before? If it is the same that wont make a difference, try a sim from a provider that you dont have like t-mobile.
Anyway simunlock just allows you to use any sim, cid unlock allows you to load any ROM which is what you want to do.
Hi folks, i'm trying to upgrade my C500 to WM6 but am failing at using the SPV-Services superCID as the website seems to be down. Is there an alternative way to superCID my C500?
Ahh, found some instructions here:
http://www.geocities.com/gggbitonti/typhoon.htm
that doesn't need the SPV-Services program
TyphoonNBFTools in crash
TyphoonNBFTools crash! Give me an error (debug of windows). no solution ?
trying to unlock c550
Im trying to unlock a spv c550 but having trouble with the last part, I can get the cert cab installed but cannot unlock.
The bootloader is hurricane not typhoon can someone help please.
Cheers
Fermec
the C550 isn't a typhoon it's a huricane, you are better off asking the question in the huricane forum
GordonCopestake said:
Hi folks, i'm trying to upgrade my C500 to WM6 but am failing at using the SPV-Services superCID as the website seems to be down. Is there an alternative way to superCID my C500?
Click to expand...
Click to collapse
The service should be back up now.
Hi ,
Mates , it's still Down !!
any Ideas ?alternative ones :S . .
Please help . .
On Kar-Hoe pages in tutorial is second alternative how to unlock your Typhoon, look link:
http://karhoe.net/content/view/35/1/
* If you cannot use SPV-Developers SuperCID tools, download this tool and use the alternative method. Then do the following.
- Keep your Tornado connected to ActiveSync.
- Extract it with WinRAR etc.
- Open the Lokiwiz.exe
- When you opend the Lokiwiz.exe you will get a black DOS screen with 4 options:
U. Unlock
L. Lock
C. Cid Unlock (SuperCID)
Q. Quit
erik.aragorn said:
On Kar-Hoe pages in tutorial is second alternative how to unlock your Typhoon, look link:
http://karhoe.net/content/view/35/1/
* If you cannot use SPV-Developers SuperCID tools, download this tool and use the alternative method. Then do the following.
- Keep your Tornado connected to ActiveSync.
- Extract it with WinRAR etc.
- Open the Lokiwiz.exe
- When you opend the Lokiwiz.exe you will get a black DOS screen with 4 options:
U. Unlock
L. Lock
C. Cid Unlock (SuperCID)
Q. Quit
Click to expand...
Click to collapse
Sim lock remove ?
I've had a search around but can't find any answer to this relating to an Artemis / Orbit.
I have just got hold of a second hand Orbit and when trying to check the CID lock via WST it comes up saying the CID is corrupt. Is there any way to fix this? I understand I should be able to write a new CID block? But I'm not sure whether these blocks are interchangable between devices (e.g can I use a key 82 block from a Wizard to write to an Artemis?)
Secondly - if I use USPL to bypass the CID - can I upgrade the ROM to 6.5 or will it through up an error because the CID is corrupt?
Cheers in advance and sorry if I'm being stupid :S