Database Users

Testing if CID unlocking was successfull??

Hi, Im having trouble unlocking my CID.
According to awizard it should be ok but Terraterm tells me otherwise. Im using terraterm to backup my firmware directly to my miniSD card but it wont let me. According to another forum, it means CID was not unlocked. Please help?
my aWizard output:
---
Initializing............CID unlocking mobile... DO NOT DISCONNECT UNTIL THE PHON
E REBOOTS!
[ 4:33:09.28] MachinaGod lokiwiz start
CopyTFFSToFile(0x0, 0x10000, lock_backup.bin)
g=52: b8124838 - 86af7c25d4133564
Key idx: 52
olddata: 1366e7e34185ec1f460f100469464259621e8365aeb43277cf2858b925828379
newdata: 95ea23df0bf16432cf7be60912a5cbdedee342037c9d3bd3dee342037c9d3bd3
newsum=ee928866 encsum=5a3282e33b2f38b4
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
CopyFileToTFFS(cidunlocked.bin:0, 0, 00010000)
ERROR: ITWriteDisk - An internal error occurred.
result=80072746
[ 4:33:24.94] Your phone is now CID unlocked....
Store the generated 'lock_backup.bin' file in a safe place. It can help to resto
re your device if anything goes wrong.
====
TerraTerm Output:
====
Cmd>r2sd all
***** user area size = 0x79280000 Bytes
R2SDBackup() - Download type = 5
usTotalBlock = 1 sizeof(SDCARD_SIGNATRUE_TABLE)=512
You didn't get the proper security level to download a specific imag
===
Doesnt this mean my CID is still locked?

Yes you're right, it's not unlocked. In my signature is a tried and true method.
Good luck!

Dr Puttingham said:
In my signature is a tried and true method.
Good luck!
Click to expand...
Click to collapse
yup i can vouch on it

Can't unlock CID using Lokiwiz03

Hi!
Im willing to flash my rom using a dumped OSRom.nb with pdocwrite util. The thing is that I read all the warnings about locked CID in the aWizard thread http://forum.xda-developers.com/showthread.php?t=252957&highlight=awizard
And it turned out that aWizard uses the same pdocread and pdocwrite as I do. So naturally I want to CID un-lock my hw6915.
But theres the thing I cant!
Bootscreen shows only 2 numbers
1.00.00
1.50
No SPL or IPL. I guessed that my hw6915 is G3 because of the 2 repeating zeros, but who knows. So I wanted to get into the boot loader command promt but nothing worked
action button + power + reset (all at the same time for a few seconds) is Useless.
So can someone please tell me how to determine the IPL/SPL or get into the boot loader mode or how to get my whatever G CID un-locked. The lokiwiz errors from aWizard are as follows:
Initializing............CID unlocking mobile... DO NOT DISCONNECT UNTIL THE PHON
E REBOOTS!
[ 5:50:22.76] MachinaGod lokiwiz start
CopyTFFSToFile(0x0, 0x10000, lock_backup.bin)
ERROR: ITReadDisk: outbuf==NULL
reading lock_backup.bin:
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
CopyFileToTFFS(cidunlocked.bin:0, 0, 00010000)
ERROR: Unable to open host/destination file - The system cannot find the file sp
ecified.
result=80072746
[ 5:50:29.06] Your phone is now CID unlocked....
Store the generated 'lock_backup.bin' file in a safe place. It can help to resto
re your device if anything goes wrong.
* Press [Enter] to continue

rx-8 You read for what device Lokiwiz03 ??????
Where is written that this works at 6915?
Read description of the program and do not try to use on your device!

No readme file
Well actually the zip file with Lokiwiz does not contain a readme file, but I suspect that it originally was meant for Wizard but other user with different phones have reported that it had worked on their phones. So after a week of reading the forums I came up only with this cid unlocker. I guess desperation took over me... Anyways can you suggest other utility?

How to reset phone lifetime

Sorry if this is fool question. Does anyone know how to reset phone lifetime to zero. I am using Dopod 838pro. Thank you

hardreset ought to do the job

It depends what you mean. If it's the overall incoming / outgoing call timers (not just ones you can reset after individual calls) then a hard reset will not reset them. Nor will flashing new ROMs Radio or otherwise.
Now of course, I cannot think of a legitimate reason for doing this other than to fool a prospective purchaser of the phone, except perhaps if you have just bought the phone and want just your own totals. Still, this is not a legit activity.
Theoretically speaking only, it would be possible:
Method 1
Code:
1) put device in bootloader mode
2) disable activesync usb connections
3) connect to bootloader using mtty.exe
4) when you see "USB>" prompt type this (DO NOT COPY-PASTE):
USB> rtask b
0 <--- wait until you see a "0" here
ate1 <--- enable local echo
atv1 <--- verbose output for return values
[email protected]?1 <--- get outgoing call time
[email protected]?0 <--- get incoming call time
[email protected]=<value1>,<value2> <--- set incoming and outgoing call
OR
Method 2
http://forum.xda-developers.com/showpost.php?p=743016&postcount=4
http://forum.xda-developers.com/showpost.php?p=1320316&postcount=5
Mike

I have successfully reseted call timers. Cheers Mikes

I tried but i was not able to did it, maybe because my pc running Microsoft Windows Vista ???

mikechannon said:
[email protected]=<value1>,<value2> <--- set incoming and outgoing call
Click to expand...
Click to collapse
not true... it won't accept any value, the specific purpose of this is solely to reset the timers

casperkid said:
I have successfully reseted call timers. Cheers Mikes
Click to expand...
Click to collapse
Which way ???
I'll try 3 methods and fail. Tell me bro ...

I tried Method 1. But when connect to bootloader using mtty.exe
I do not see a "USB>" prompt I see a "Cmd>" prompt.
What is wrong?

Hrrrm.. I thought I'd try this too as I've always been curious about this...
It seems I get the Cmd> prompt too - is this as I'm accessing the 2.10.Olipro bootloader? Is there a different command set to this?

Hrrrmmm - Replying to myself...
It looks like you need to have to have HardSPL-1.10 installed - as looking at the changelogs for Olipro's HardSPL:
Code:
Hard-SPL-1.11
- Flashing Radio BL 0108 now supported
- Downgrading SPL no longer allowed.
- rtask command removed.
- new RUU interface required to flash ROM files.
Hard-SPL-1.10
-Initial release; SuperCID and no signing required
-Compatible only with Radio BL 0107
-has rtask commands for accessing radio facilities.
This means you'd have to downgrade to SPL v1.10 to get into the rtask b command set. Then upgrade to v2.10 later on...
That being said, when I try [email protected]=270F,270F I just get back "ERROR". It seems to do this on all values except 0000,0000 - however this doesn't seem to modify the call timers returned by talk?0 and talk?1...
Phone is currently IPL-1.04, SPL-1.10.Oli - which I understand should work, however I get the following:
Code:
USB> info 2
HTCSUSB> task 32
Level = 0
USB> rtask b
Enter Radio Image
AT-Command Interpreter ready
atv1
OK
ate1
OK
[email protected]=2710,2710
ERROR
[email protected]?0
@TALK: 00023C7D
OK
[email protected]=ffff,ffff
ERROR
Flashed back to SPL-1.01.Oli and the same problems... [email protected]=xxxx,xxxx will error on any value that isn't 0000 - which obviously doesn't reset the timers.

eightball said:
I tried Method 1. But when connect to bootloader using mtty.exe
I do not see a "USB>" prompt I see a "Cmd>" prompt.
What is wrong?
Click to expand...
Click to collapse
I have the same before, but after I flash my ROM with Hard-SPL-V7, and I see right away the USB> under mitty.exe. Search the forum for Hard-SPL-V7 if you want. After resetting the timer, you may want to flash back the Hard-SPL-V7 to another version. Good Luck!
Reason for resetting the timer: I bought my ATT 8525 in eBay, and I hate to see my phone showing hundreds minutes of incoming and out-going calls. Secondly, it is a chanllenge to myself if I can do it. Yes, I did it. It is part of the reason I bought ATT 8525/Hermes, it is FUN to do modifications!

Huh? Hard-SPL v7 doesn't have the rtask commands required to do this! Do you mean that you downgraded to 1.10, then reset usage, then upgraded to v7 afterwards?

Thanks to Pof, my phone was SIM Unlocked & SuperCID before hand. I tried to get USB> under mitty.exe with no luck. Eventually, I tried to change my HardSPL version, thanks to Olipro, I download the HardSPL-V7 from this thread http://forum.xda-developers.com/showthread.php?t=296722
As I said, after I flashed my ROM with this HardSPL-V7, I can get USB> under mitty.exe. Yes, after resetting the timer, I switched back to the original HardSPL by running Pof's Sim & SuperCID program again.

aaronwms said:
Thanks to Pof, my phone was SIM Unlocked & SuperCID before hand. I tried to get USB> under mitty.exe with no luck. Eventually, I tried to change my HardSPL version, thanks to Olipro, I download the HardSPL-V7 from this thread http://forum.xda-developers.com/showthread.php?t=296722
As I said, after I flashed my ROM with this HardSPL-V7, I can get USB> under mitty.exe. Yes, after resetting the timer, I switched back to the original HardSPL by running Pof's Sim & SuperCID program again.
Click to expand...
Click to collapse
I don`t understand how did you reset the timers in Hard-SPL-V7 when rtask command is disabled???

That's what I was wondering... I still haven't managed to figure this out - see my earlier posts for details...

CRCinAU said:
That's what I was wondering... I still haven't managed to figure this out - see my earlier posts for details...
Click to expand...
Click to collapse
I will try today with Hard-SPL 1.10 and SPL 1.04. I will report what happend!

I did a downgrade from HardSPL V7 (2.10 Olipro) to HardSPL 1.10 and done the folowing commands:
USB> rtask b
Enter Radio Image
AT-Command Interpreter ready
There was no "0" so I typed ate1 an got "0". Then continued:
atv1
OK
[email protected]=270F,270F
OK
Success. Timers are 00:00:00. The important thing is to have SuperCID on "info 2".

Hrrrm - I just did exactly what you did again, and it still errors... The difference is that I'm running radio version 1.50.30.10. I'm in the middle of flashing it back to 1.48.00.10 to try...
Nope... Still errors...
Code:
USB> rtask b
Enter Radio Image
AT-Command Interpreter ready
(type in atv1e1)
OK
[email protected]?0
@TALK: 00026755
OK
[email protected]=270F,270F,
ERROR
This is using SPL-1.10.Oli, radio version 1.48.00.10.
From what I understand, my device is SuperCID...
Code:
USB> info 2
HTCSUSB> task 32
Level = 0
USB>
What am I missing here? lol
IPL-1.04
SPL-1.10.Oli
Radio: 1.48.00.10

Now what?

So, now I cant get anything working in my P4350 except the bootloader mode.
The way I got here:
Installed many roms, trying to find the best for me. After some time, even the most stable rom was not stable, all of them crashed, freezed, rebooted after about 1 day usage. (With and without SD card, and no apps installed).
So I decided to remove hardspl and do the whole thing again. I downloaded Aserg-Remove-Hard-Spl pack, and run it. After the second step the phone was not completly blank, I saw the console staying at the "praying ..." text (without backlight), and the phone didnt responded for any buttons or touch. So here came the third step, the RUU, but it gave me error 260, that it cant find my device. (How would this, since the activesync was not connected?)
So i couldnt do anything, I soft reseted the phone, but it wont turned on, or it did but the screen left blank. - like no rom were installed. I tried to press the camera, and the RGB screen came up, saying IPL 4.14.0001 and SPL 4.70 Yang.
Tried to hard reset, but when I pressed send, it said fail.
Tried to update at this position with RUU, but its need activesync so it gave me the same error. Tried to install 3 different roms from 2 differenct SD Cards (that worked before), and It checks the Card, the the RGB screen comes up (like no rom would be on the SD card).
Created a GoldCard, and installed the official ROM. The "Checking SD Card" text stays here for 5 secs, then the RGB screen comes up.. wtf?
Same with heradiag.nbh
Now tried again the Hard reset, it said succesfull, but when it tries to boot I just get a green to black gardient image, something like this: http://www.cylekx.net/help/tutorial_assets/images/byte ramp and green gradient.jpg (but rotated), and nothing else happens.
Any ideas to get the device back to life?
Maybe there are some hardware malfunction inside the phone?
Thanks, and sorry if I posted this to a wrong thread. (was not sure where it should go)
Just got a WhiteScreen crash at the "Checking SD Contents" screen.. It cant be software problem i guess.
Cmd>getdevinfo
GetDeviceCID: Error - InitDecoder
HTCSHTCE
Cmd>ls
clean up the image temp buffer at 0x8C100000 Length 0x03A00000
BOOTLOAD_PAGE_TABLE_BASE_C_VIRTUAL= 0x8C080000
Clear image temp buffer done .
MTTYDownloadImage
start download
==CreateFile err==nb0 Sync bytes error(0) 6B != 42
Error : DownloadImage return error (code = 0xFFFFFFFF)

While your phone is in Bootloader mode, install the original ROM with the RUU. All Heralds (P4350) and Atlas'(Wing P4351) can be flashed while on the bootloader screen. Just disregard the step on the RUU that says to make sure your phone is connected to ActiveSync. Also if you have downloaded the whole RUU for the Original ROM, you have to edit the .EXE file to remove the .SPL file that is inside. You can use 7-Zip to get inside of the .EXE file. If not, then just install the ROM as you normally would. You will not need a SD card to install this. Let us know what happens. EVERYONE: if I have forgotten to mention something, please add.

baronmxc said:
While your phone is in Bootloader mode, install the original ROM with the RUU. All Heralds (P4350) and Atlas'(Wing P4351) can be flashed while on the bootloader screen. Just disregard the step on the RUU that says to make sure your phone is connected to ActiveSync. Also if you have downloaded the whole RUU for the Original ROM, you have to edit the .EXE file to remove the .SPL file that is inside. You can use 7-Zip to get inside of the .EXE file. If not, then just install the ROM as you normally would. You will not need a SD card to install this. Let us know what happens. EVERYONE: if I have forgotten to mention something, please add.
Click to expand...
Click to collapse
Hah, i was so unlucky A chip on the motherboard burnt, so if u plugged in the USB it crashed immadiatelly, no wonder why the PC couldnt recognise it..
But still have a problem. Tried to flash the original shipped rom, and another costum rom but both said INVALID MODEL ID.
So what now?
thanks
Cmd>getdevinfo
GetDeviceCID: Error - InitDecoder
HTCSHTCE
Cmd>ls
clean up the image temp buffer at 0x8C100000 Length 0x03A00000
BOOTLOAD_PAGE_TABLE_BASE_C_VIRTUAL= 0x8C080000
Clear image temp buffer done .
MTTYDownloadImage
start download
==CreateFile err==nb0 Sync bytes error(0) 6B != 42
Error : DownloadImage return error (code = 0xFFFFFFFF)
Cmd>set 32
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
PL_SDSetSlotNumber() - MPUIO_SDIF_SEL1=0, MPUIO_SD_IF_SEL=0
SDInit - SD ver2.00
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Card status error in response. MMC_STAT = 4000
SD Ver2.00: Low Capacity
SD clock to 24MHz
***** user area size = 0x79A00000 Bytes
SDInit---
SDInit OK
Unlimited time!
GetDeviceCID: Error - InitDecoder
g_cKeyCardSecurityLevel = 0
HTCE
More Info:
Now i can connect with MTTY and write commands in the bootloader. With this SPL version most commands i found doesnt work, but I got some information about my phones status: the GoldCard's security level is 0, thats correct. The problem is with the CID: GetDeviceCID: Error - InitDecode
I think the problem is this, since it cant get the CID, cant verify the rom matches .
I can write things with mtty into ram or storage, is it possible to write the whole rom directly to the devices boot dir?

CheeseDave said:
Hah, i was so unlucky A chip on the motherboard burnt, so if u plugged in the USB it crashed immadiatelly, no wonder why the PC couldnt recognise it..
But still have a problem. Tried to flash the original shipped rom, and another costum rom but both said INVALID MODEL ID.
So what now?
thanks
More Info:
Now i can connect with MTTY and write commands in the bootloader. With this SPL version most commands i found doesnt work, but I got some information about my phones status: the GoldCard's security level is 0, thats correct. The problem is with the CID: GetDeviceCID: Error - InitDecode
I think the problem is this, since it cant get the CID, cant verify the rom matches .
I can write things with mtty into ram or storage, is it possible to write the whole rom directly to the devices boot dir?
Click to expand...
Click to collapse
a INVALID MODEL ID error occurs when you use the wrong RUU/ROM for a phone. Heralds must use the Herald RUU and Wings must use the Wing RUU.
Herald RUU (P4350) <- English version is the 3rd link.
T-Mobile Wing [Atlas](P4351) RUU <- Phone Number and IMEI Required
T-Mobile Wing [Atlas](P4351) RUU<- Phone Number and IMEI NOT Required however I believe that this is an older Windows 6.0 Build
If you want to keep your phone hard spl'd, you need to modify the EXE of the RUU and erase the SPL.nbh file.
As far as writing the ROM directly, that is out of my expertise. Someone else will have to answer that.

baronmxc said:
a INVALID MODEL ID error occurs when you use the wrong RUU/ROM for a phone. Heralds must use the Herald RUU and Wings must use the Wing RUU.
Herald RUU (P4350) <- English version is the 3rd link.
T-Mobile Wing [Atlas](P4351) RUU <- Phone Number and IMEI Required
T-Mobile Wing [Atlas](P4351) RUU<- Phone Number and IMEI NOT Required however I believe that this is an older Windows 6.0 Build
If you want to keep your phone hard spl'd, you need to modify the EXE of the RUU and erase the SPL.nbh file.
As far as writing the ROM directly, that is out of my expertise. Someone else will have to answer that.
Click to expand...
Click to collapse
Thanks for your help, but as i said my device ID is messed up with the USPL process... "GetDeviceCID: Error - InitDecoder" None of the RUUs works.
Waiting for the directly-writing method, or i'll have to replace the storage at the mainboard... (wont be cheap).

error spl

here is my problem
stuck in bootloader.
I have a HTC Athena x7500
Wend I turn on the device, it goes directly to bootloader and
the screen is:
ATHE 100
IPL - v1.00
ATHE 100
SPL-v3.05.0000 OR my old spl is 1.10
I have tried to change the language of my athena and then he died :spanish > fransh
USB (wend is to connect)
series (wend is unconnectable).
I can not turn the unit off by pressing the button, but must take
the battery.
I have tried with hardspl its not working
I want a solution in the forum xda-develop it says my q must upgrade to the rom of espana oficial
After downloading the rom:Advantage_HTC_SPA_2.21.412.1_1.50.00.00_Ship
I tried to upgrade to this rom May j has a mesage on my athena screen:
found spl v1.10
dowload Spl before v3.05 is not allowed! or on my pc has a mesage error 244 invalid model id
I tried to update it with the sd card i have the same mesage
upgrade with athenaUnlucker not work
upgrade with hardspl v7 not work
upgrade with CheetahUnlocker not work
upgrade with athena wraper not work
I tried to fix the problem with mtty
cmd> task 32
level=ff I board on my pda (cid locked)on the Spanish language HTC_304
Cmd> lnb filename.bin 76508000
invalid comand
or Cmd> lnbs filename.bin 75108000
Cmd>
no response
helpe me plaise::crying:
it's been two year since I looked for a solution
sorry for my bad Englis
thank you in advance

Try This!!!
schnieder said:
here is my problem
stuck in bootloader.
I have a HTC Athena x7500
Wend I turn on the device, it goes directly to bootloader and
the screen is:
ATHE 100
IPL - v1.00
ATHE 100
SPL-v3.05.0000 OR my old spl is 1.10
I have tried to change the language of my athena and then he died :spanish > fransh
USB (wend is to connect)
series (wend is unconnectable).
I can not turn the unit off by pressing the button, but must take
the battery.
I have tried with hardspl its not working
I want a solution in the forum xda-develop it says my q must upgrade to the rom of espana oficial
After downloading the rom:Advantage_HTC_SPA_2.21.412.1_1.50.00.00_Ship
I tried to upgrade to this rom May j has a mesage on my athena screen:
found spl v1.10
dowload Spl before v3.05 is not allowed! or on my pc has a mesage error 244 invalid model id
I tried to update it with the sd card i have the same mesage
upgrade with athenaUnlucker not work
upgrade with hardspl v7 not work
upgrade with CheetahUnlocker not work
upgrade with athena wraper not work
I tried to fix the problem with mtty
cmd> task 32
level=ff I board on my pda (cid locked)on the Spanish language HTC_304
Cmd> lnb filename.bin 76508000
invalid comand
or Cmd> lnbs filename.bin 75108000
Cmd>
no response
helpe me plaise::crying:
it's been two year since I looked for a solution
sorry for my bad Englis
thank you in advance
Click to expand...
Click to collapse
try this,
here's an experimental program I made to make the process more automatic so users can fix their own wifi without our help.
this is good for both corrupt modelid and corrupt wifi, and fixes both at the same time.
STEP BY STEP:
1. download attachment at the end of the post for mac1.exe (requires .net 2.0 installed on the PC)
2. you will also need to download the other attachment in this post for the mtty program.
3. enter bootloader (tricolour screen) manually by pressing and holding camera button all the way in (yes I mean that, press it in as hard as you can!!), while doing a reset, then keep the camera button held until you see the tricolour screen.
4. disable USB in activesync (wmdc if you have vista - in this case, do not kill wmdc, just disable usb in it!!!)
5. run mtty and select USB option from the dropdown box!
6. then press enter in main window that comes up, see if that gives you Cmd>
7. now you should have Cmd>, if not, re-check if you did the above steps right until you get Cmd>
8. now run the mac1.exe, type in your MAC address you want to use for the Athena, if you have SPL 3.xx reported on the tricolour screen, then use the button for SPL 3.xx, otherwise if you have SPL 1.xx reported, use button for 1.xx.
9. this should have generated a .bin file for you, copy that bin file in the folder of mtty.
10. now, in mtty, type (do not copypaste!) this command: task 32
11. this should return Level = 0
12. now, you must only do one of the two following commands:
- if you have SPL 3.xx, then type (do not copypaste!!) this command: lnb filename.bin 76508000
(there filename is the name of the .bin file you generated - don't forget to put .bin after filename, as the full name is needed).
- OR, if you have SPL 1.xx, then the command is different (do not copypaste!!): lnbs filename.bin 75108000
(there filename is the name of the .bin file you generated - don't forget to put .bin after filename, as the full name is needed).
NOTE, the command starts with a lowercase "L", not "I"!
WARNING: PLEASE DO NOT MIX UP THESE TWO DIFFERENT COMMANDS!!!
if this info helps: most people will have SPL 3.xx, and if you have AP4 (not vanilla) already running then you're definitely 3.xx
13. mtty will popup a window asking "OK", you press OK!
if you get "Fail to synchronize with the host (1)", then make sure you did follow step by step. if still same error, try placing mtty and the bin file under C:\.
14. now the file downloads, if mtty reports it flashed the file, and at the end "code entrypoint unknown", then that's it, now boot back to WM and see if wifi works.

thank you for the answer
I tried with mtty and mac1.zip
here are the step
Cmd> task32
level=ff I board on my pda (cid locked)on the Spanish language HTC_304
Cmd> lnb filename.bin 76508000
invalid comand
or Cmd> lnbs filename.bin 75108000
Cmd>
no response
I do not have the mac address of my wifi on the label of my pda so I put j 11 11 11 11 11 11 is what it must have the real mac address
I do not know what to do
It's been 4 months I'm looking for a solution for my pda
help me please