Related
I just got my kjam today, about 5 hours ago, just took it off the charge like 4 hours ago and loving it so far. but my problem...:
I connect to my wireless router fine but my internet uses a proxy, so how do i set the proxy on pocket ie?(my isp requires i use a proxy to browse the net)
If i can't set a proxy on pocket ie, does netfront work with wm5 and does it support proxies?
ok, this i havent tested this but think its right:
On your wireless settings page (start/settings/connections/network cards/
Pick the wireless SSID relating to your home WLAN, click (not hold, just click) it'll open the config screen. in the connects to box, change to "my work network" or another network if you have edited networks already.
ok out back to the connections page
open "connections" under "my work network" configure the proxy server
Hopefully this will now work
Beeble said:
...open "connections" under "my work network" configure the proxy server...
Click to expand...
Click to collapse
there is no "my work network" under connections it just has my wap and gprs connection.
also i installed netfront and put the proxies in there but still nothing.
in that case try:
settings/connections
Advanced tab
select networks
programs wich automatically connect to the internet should use:
- click new
Make a new wifi network setting (call it whatver, wifi or your ISP name it doesn't matter)
Configure the proxy for that setting.
Revert to reply 1 to change the wifi SSID connection to associate with the new wifi network, and it will use the proxy settings you specified.
(hopefully!)
alright, i did as you said but i have another problem now. it won't even connect to my router. I took the WEP key i had off and still, wont connect. and yes its on mixed (b&g)
It says available then i click and hold click on connect. it says connecting then goes back to available... and wififofum does no good when i click on connect.
pocket ie uses my work network proxy settings and if you setup that way then it wont connect via wifi or/and messenger wont connect to the internet, i use netfront mostly better then pocket ie
i gave me kjam a static ip and it connects to the router right away, but still no browsing. im using netfront as well but every time i open it up i get an error and the "error reporting" thing comes up and asks me if i want to send the error.. is netfront WM5 compatible?
-update-
I just installed netfront v3.3 and connected to my wireless network and its giving me this error: "Cannot load page. TypeNS no server is specified" where to i specify the dns server? couldn't find it in netfront so its gonna be in the network settings of the kjam..
-UPDATE-
I GOT IT!!! IT WORKS.. wow ok but one last question, when you go to start>settings>connections>Network Cards and then click on "Network Adapters" on the bottomw, which one is the built in wifi card cuz i set the IP and DNS for like 4 of those adappters.
-FINAL UPDATE-
so i accidently hard reset my device but it did me some good. cuz i did a soft reset after the setup process and now have no junk apps installed
but i installed netfront 3.3 and set the proxies init, connected to my wireless network and it worked right away. msn messenger still isn't working but i installed IM+ and that works. i`m posting this using my kjam so all is well
the WIFI state is connected. but when I try to open a webpage, eg,www.google.com, it shows error: the page cannot be found. Check the name and try again. anyone knows that? how can I fix it?
Thanks.
HELP ME
Someone can help me?!
Where are you using the wifi? Is it your home network or work/hotspot?
Go to settings then the connections tab then tap the "wireless lan" icon. Tell us what you see on that screen, then click the advanced tab and tell us what is there too. Finally click "menu" then "network cards" and tell us what is there (should be a list of available networks).
The only problem I have with my wireless is that i need to have a very strong signal to be able to receive my IP address via DHCP. Once it has it then it's OK and i can wander about but I get no address when the signal is weak ( less than 50%).
Cheers
Gadget.
tatata
Check that you have set the connection type to "internet" - I suspect this problem occurs because you have it set to "work".
Chris
I am having the same problem , my signal is nearly 100%, the phone is set to internet, Belkin 54g,, authentication is 'open', WEP, the key was entered manually (26 digits ), do i use 802.1 access ?
mode is infrastructure, tx rate is auto, channel 11,, the mac and ip address is correct,, what is enroll ?
I have tried everything and it is obviously connected so why will it not load pages ?
Had the same problem myself with my XDA IIs. Only solution I could find was to turn disable the firewall on my router. No idea why that worked, and cant find a way to turn the firewall on without causing the problem again, but it did work!
got smilar problem here, some times even when i connected and browsed web say 2 mins. ago suddenly connection can not be established i have tried it with belkin 54g linksys and 3com routers all same couldnt find any solution and accepted it as it is
gadget_uk said:
Where are you using the wifi? Is it your home network or work/hotspot?
Go to settings then the connections tab then tap the "wireless lan" icon. Tell us what you see on that screen, then click the advanced tab and tell us what is there too. Finally click "menu" then "network cards" and tell us what is there (should be a list of available networks).
The only problem I have with my wireless is that i need to have a very strong signal to be able to receive my IP address via DHCP. Once it has it then it's OK and i can wander about but I get no address when the signal is weak ( less than 50%).
Cheers
Gadget.
Click to expand...
Click to collapse
hello All and Gadget
Bought the XDA mini S from 02 yesterday and havent really been playing with it except installing programs, removing the 02 files and finding my way round the phone.
Anyway, having problem with getting WIFI, can anyone help?
At home, I use Wanadoo broadbrand wireless 'livebox' and here are the following details on the Mini S:
Wireless Lan> main tab> SSID - blank, mode - infrastruture, BSSID -blank, Tx rate - auto, channel - 0
Advanced tab > status, not connected to network, MAC - 00-09-2D-8D-66-BF, IP - 0.0.0.0
network cards tab> wireless tab - wanadoo - 2D9E available
network adaptors> network card connects to 'The internet'
Thanks in advance
Andy
Might be a stupid question but.....
Have you got any security on your wireless router? if so have you permitted the MAC code of your device to connect and obtain an IP address from your router?
Anthony.
an2ony said:
Might be a stupid question but.....
Have you got any security on your wireless router? if so have you permitted the MAC code of your device to connect and obtain an IP address from your router?
Anthony.
Click to expand...
Click to collapse
Thanks for the prompt reply. Another stupid question is how do I find out if I have security on my wireless router and if i have security, how can i permit the mac code to do its stuff.
Thanks again.
Andy
Check out:
http://help.wanadoo.co.uk/resultDis...Configuration+Manager&resultType=5002#Goto155
Have you set up a WEP security key to prevent unauthorised access to your ADSL Connection? if not then you should; I think the 'LiveBox' has a default key which you have to enter to connect and obtain an IP address.
Not being familiar with this router, I cannot tell you exactly but I would expect you to have to permit a new MAC code under the 'associated devices' menu.
Sorry for being Vague.
Hope this helps. :roll:
an2ony said:
Check out:
http://help.wanadoo.co.uk/resultDis...Configuration+Manager&resultType=5002#Goto155
Have you set up a WEP security key to prevent unauthorised access to your ADSL Connection? if not then you should; I think the 'LiveBox' has a default key which you have to enter to connect and obtain an IP address.
Not being familiar with this router, I cannot tell you exactly but I would expect you to have to permit a new MAC code under the 'associated devices' menu.
Sorry for being Vague.
Hope this helps. :roll:
Click to expand...
Click to collapse
Anthony
First of all, thanks for the link. I am able to see all the details (technical) of my livebox on the wanadoo configuration page.
There is a WEP key set and having tried to enter as much info on the relevant places on the mini s, no luck.
The mini s does recognise the 'livebox' and connects to it then drops off. However, it doesnt pick up any info from the 'box' to complete the relevant wireless tabs on the mini s.
Dont know how I'm going to resolve this but thanks for your help so far.
Shame not to utilise the Mini S with my current wireless broadband connnection.
Cheers
Andy
Hi All
Thanks for the advice so far and after so many attempts I am still unable to configure the mini s to use the wireless connection at home.
Need a huge favour. Would anyone give up a few minutes of their time to go through the configuration on the phone with me.
Please PM me your contact number and when it is convienent for me to call you back.
Much appreciated.
Andy
Hi Andy,
the settings depend to some extent on whether you have an access point (router) or shared connection.
You need to know the network name SSID, (and whether it's hidden)
WEP, WPA/PSK key,
Whether (as previously stated) you have MAC address control enabled in your router
Whether you have DHCP enabled (for automatic IP address from router)
Whether you need to log on (enroll) to password protected shares.
In the mini-S wifi>Menu>Network Cards>Network Adapters tab you should set your network card to connect to The Internet and check that the adapter (SDIO WLAN etc.) is set to use auto IP (if you have DHCP) or pick your own IP address if you have a fixed range.
If you have Zone Alarm or another firewall (I surely hope so :wink make sure that the (mini-S) IP address is in the trusted zone
Lastly; if you seem to be connected but you can't get any web pages - just a page not found error, try killing bloody ActiveSync on the mini-S, sometimes when I'm browsing I suddenly can't access pages and that's what the problem turns out to be - when you stop active sync running in the background it all starts to work again.
This is assuming you have a router not a shared connection which may be slightly different.
Oh....and read the threads about 802.11b and g, if your router only allows 11g the mini-S doesn't connect (I'd find the threads and point you to them but I gotta get back to work soz)
HTH (feel free to contradict or put me straight guys
:lol: )
Kim
cozzykim said:
Hi Andy,
the settings depend to some extent on whether you have an access point (router) or shared connection.
You need to know the network name SSID, (and whether it's hidden)
WEP, WPA/PSK key,
Whether (as previously stated) you have MAC address control enabled in your router
Whether you have DHCP enabled (for automatic IP address from router)
Whether you need to log on (enroll) to password protected shares.
In the mini-S wifi>Menu>Network Cards>Network Adapters tab you should set your network card to connect to The Internet and check that the adapter (SDIO WLAN etc.) is set to use auto IP (if you have DHCP) or pick your own IP address if you have a fixed range.
If you have Zone Alarm or another firewall (I surely hope so :wink make sure that the (mini-S) IP address is in the trusted zone
Lastly; if you seem to be connected but you can't get any web pages - just a page not found error, try killing bloody ActiveSync on the mini-S, sometimes when I'm browsing I suddenly can't access pages and that's what the problem turns out to be - when you stop active sync running in the background it all starts to work again.
This is assuming you have a router not a shared connection which may be slightly different.
Oh....and read the threads about 802.11b and g, if your router only allows 11g the mini-S doesn't connect (I'd find the threads and point you to them but I gotta get back to work soz)
HTH (feel free to contradict or put me straight guys
:lol: )
Kim
Click to expand...
Click to collapse
ello mate
I gotta agree with the activesync thing. I had the same problem as of 2 mins ago just tried exiting active sync and would ya believe it my wi fi now works. So i gotta say cheers mate!
cheers
tatata said:
the WIFI state is connected. but when I try to open a webpage, eg,www.google.com, it shows error: the page cannot be found. Check the name and try again. anyone knows that? how can I fix it?
Thanks.
Click to expand...
Click to collapse
I had the same problem with my Linksys WRT54G before. I upgraded the firmware (dowloaded from Linksys website) of my WRT54G and the problem solved.
New to the board (Just got my Cingular 8125) Having the same problem.
I get an IP addressfrom my router, it shows I am connected on my network settings, but still can't pull up any pages. It has never worked since I got it (only 3 days though) Someone please help us.
If >Connection Manager>Settings>WiFi Settings shows you have an IP address and are connected (Advanced :Status) then check your firewall settings and try stopping ActiveSync, always seems to do the trick for me
Also check out this post, could this be your problem?
http://forum.xda-developers.com/viewtopic.php?t=41469
@ cozzykim
I have shut down my zone alarm and don't have firewall enabled on my linksys WRV54G. ActivesSync is also closed. Still no luck
I will try to update my ROM it is not far fetched that cingular Jerry rigged the WiFi. I hope ther is a class action suit coming soon.
Thanks for your help.[/quote]
I have a SPV M3100 (TyTn, I think) but I cant get it to connect using WiFi to my wireless router. I can go into 'Configure Wireless Networks' and tell it to connect to my router, all the settings are correct, but all it does is try to connect and fail, and no error message comes up.
Does anyone know how I could fix this problem?
Thanks,
Sebastian
it might help if you state what rom your are using and what protection the router is using? I know there are many threads discussing this issue with WM6 using WPA. Have you tried connecting with no encryption? If so can you connect.
Sorry, the ROM version is: 1.23.61.4, date: 7/13/06
It is running WM5 PocketPC. Encryption is WEP. No I havent tried no encryption. I will after when I get home.
Sebastian
OK, I've tried without encryption, and I've fiddled about with the settings but it still doesn't work.
Each time I tell it to connect it says 'Connecting' for about a second then says 'Unavailable' for a few seconds, then back to 'Available', untill I next tell it to connect.
Any suggestions?
thanks,
sebastian
if it use mac filtering the mac of the tytn need to be added to the lists of mac's the router wanna talk to
that's not the problem either, sorry
Couple of things (I'm running WM6 on my M3100, so WM5 is a bit of distant memory ) you could look at.....
First, does your router use DHCP to issue IP addresses? if not, you'll need to set the phone with a static IP. To do that, go to Start / Settings / Connections tab / Wi-Fi / Network adapters tab, make sure it says "connect to the internet" then tap the "802.11" network adapter, tap "use specific ip address", fill one in and "ok" your way back out.
Second, in Start / Settings / Connections tab / Wi-Fi / Wireless tab, tap and hold your "unavailable" wireless connection then choose Edit. Make sure the "connects to" box says Internet. Also, if your router doesn't broadcast its' SSID, (on WM6 at least) tick the box that says "this is a hidden network", then go next, next finish (making sure the authentication and encryption types match your router config!!).
Hope this helps,
Mark.
I have now been through every intricate detail within settings, and still to no avail. One (possibly) good thing did come out of it though - an error message.
I got it when going to create a new WiFi connection and clicking on the 802.1x tab, it says:
"Cannot log on to the wireless network. This network requires a personal certificate to positively identify you."
I made sure I inputted the network key correctly and all the encryption settings were right.
Please tell me that helps solve the problem! lol
btw, the router is a D-Link DSL-604+, just incase that helps anybody solve the problem.
sebastian
If you're getting certificate errors, it sounds as though you've ticked the setting in the phone's wireless config that says something like "IEEE 802.1x network access" and selected "smart card or certificate".
Go back in to the wireless config, tap and hold the "unavailable" network, then select Edit. Go through - next, next and the authentication is on the last page IIRC.....just untick the box, tap finish and you should be away!!
Cheers,
Mark.
It WORKS!!
I forgot to untick 'The network key is automatically provided' and tried to connect, and it now works
I'll just kiss goodbye to my battery life now
Thanks for everyone who has helped me.
Sebastian
My ATT Tilt wont connect to my D-Link Wireless N Router.. does the Tilt not work on N routers?
hi there , i can see that my Polaris is connected to my router via wpa2-psk
as it's MAC and ip are showed in router
I also see that an IP is assigned to my Polaris , but i cannot surf the internet
Tried IE , Opera and YouTube
Anybody has a suggestion?
depend on your network setup really
as take me my wifi dont have direct uplink
so i have to manualy set ip's and gateway and dsn to my
pda to match the computer which is the gateway and what
dns it have
you can get that in windows in a console by ipconfig /all
and manualy set my ip within the same subnet as the computer
which is gateway
Rudegar said:
depend on your network setup really
as take me my wifi dont have direct uplink
so i have to manualy set ip's and gateway and dsn to my
pda to match the computer which is the gateway and what
dns it have
you can get that in windows in a console by ipconfig /all
and manualy set my ip within the same subnet as the computer
which is gateway
Click to expand...
Click to collapse
THANKS!!!WORKS!!!!
you'd better check your router's DHCP settings as your provider might wish to change his DNS server addresses in the future and your device will keep using old, static ones
same but different?
Greetings:
this thread title describes my problem, but have to admit that I'm not certain the fix described above would apply to me (or perhaps I just didn't understand the answer??)
My setup:
HTC Advantage x7501 (freshly done a "hard reset") running WM6.
I DO NOT have a SIM card installed, nor do I plan (at this time) to use on a 3G network, just wish to use as a mini-computer on wifi. i've set the "wireless lan" Power Save Mode to "best performance" and am sitting close to wifi. Other windows and mac laptops have successfully used this router for years.
Asante FriendlyNet 3002 Wireless router (80211.b; WEP capable and on, MAC address controls capable and on)
The HTC has been connected several times to the router with the 40/64 - bit encryption. The little arrows move during connection, then stop and status is reported as "connected". The Wireless Lan "Advanced" tab shows "connected to network", reports the MAC, and the right IP address, and allows me to 'renew' it (and it always renews to the same #).
I do notice under the "configure network adapters" part of the wi-fi control settings that there are no "name servers" filled in, but the router is doing DHCP so maybe this is not a problem??? (checking my mac powerbook, I don't fill them in there either)
If I check (from another computer) the router I can see the HTC advantage shows up in the DHCP list of active clients.
Now: when I go to surf the internet, I get NOTHING with either IE or Opera 8.65.
when I put an address in the browser bar (or click a link on the Opera homepage) I see a status bar report at the bottom of the screen that says: "Images 0/0KB Looking up host..." after sometime this process times out. sometimes then I get a message to the effect of "unable to locate host" or just a time out.
Any suggestions?
ugggh: BTW, I have my "configure network adapters" setting to say that My Network Card Connects to: "the internet", not "work"
AND, under Connections I used the "select networks" button to say both types of programs should connect using "My ISP"
many thanks in advance! ( i have been trying for nearly two weeks a bit here and there, reading, googling, etc. w/o luck...)
May I suggest to enter manually the DNS and alternate DNS. I had the same problem and done that and worked.
marklar2u said:
Greetings:
this thread title describes my problem, but have to admit that I'm not certain the fix described above would apply to me (or perhaps I just didn't understand the answer??)
My setup:
HTC Advantage x7501 (freshly done a "hard reset") running WM6.
I DO NOT have a SIM card installed, nor do I plan (at this time) to use on a 3G network, just wish to use as a mini-computer on wifi. i've set the "wireless lan" Power Save Mode to "best performance" and am sitting close to wifi. Other windows and mac laptops have successfully used this router for years.
Asante FriendlyNet 3002 Wireless router (80211.b; WEP capable and on, MAC address controls capable and on)
The HTC has been connected several times to the router with the 40/64 - bit encryption. The little arrows move during connection, then stop and status is reported as "connected". The Wireless Lan "Advanced" tab shows "connected to network", reports the MAC, and the right IP address, and allows me to 'renew' it (and it always renews to the same #).
I do notice under the "configure network adapters" part of the wi-fi control settings that there are no "name servers" filled in, but the router is doing DHCP so maybe this is not a problem??? (checking my mac powerbook, I don't fill them in there either)
If I check (from another computer) the router I can see the HTC advantage shows up in the DHCP list of active clients.
Now: when I go to surf the internet, I get NOTHING with either IE or Opera 8.65.
when I put an address in the browser bar (or click a link on the Opera homepage) I see a status bar report at the bottom of the screen that says: "Images 0/0KB Looking up host..." after sometime this process times out. sometimes then I get a message to the effect of "unable to locate host" or just a time out.
Any suggestions?
ugggh: BTW, I have my "configure network adapters" setting to say that My Network Card Connects to: "the internet", not "work"
AND, under Connections I used the "select networks" button to say both types of programs should connect using "My ISP"
many thanks in advance! ( i have been trying for nearly two weeks a bit here and there, reading, googling, etc. w/o luck...)
Click to expand...
Click to collapse
I have a HTC Wizard (Cingular version). Last week, I discovered this forum and upgraded my phone from WM5 to WM6.1.... and the exact same thing happened to me! Before the upgrade (on WM5), my phone was surfing the internet thru Wifi just fine... and 30 minutes later, after the upgrade -- it didn't work.
Like you, I searched thru these forums and found various "tricks"... none of them worked for me either.
Luckily, I didn't give up on my phone. A couple days later I got the idea "let's see if I can connect to other networks". I stood out on the back porch and my phone found 3 or 4 other Wifi networks..... I tried to connect to each, with no luck. I came back into the house, and on a whim tried my own home network again --- IT WORKED! Since then, I have been able to connect to various-and-sundry Wifi networks just fine. The problem "just went away" (which some others on the forum have reported... "just keep trying", they say).
I have no conclusive evidence, but my theory is that there are some default (or residual) registry settings for Wifi that need to get "pushed out" or overwritten. By attaching to several different networks, the new/default settings in the registry gets overwritten, and once all the "bad" data is gone -- your phone will be fine.
Hope that helps.... good luck!
TY - but no success yet
MariaM:
I went to my router config page and got the DNS, then I checked the DNS from a laptop (that is successfully connecting) and both report the same:
domain net
nameserver 71.252.0.12
nameserver 71.250.0.12
Note that neither show / report a "WINS".
entering these into the SETTINGS>CONNNECTIONS>WIFI>NETWORK ADAPTERS>NAME SERVERS helped...and I did a soft reset after entering them, and the entry did hold in the setting after the soft reset.
if anyone has any ideas I'd be thrilled. Happy to do a hard reset again and start from scratch if need be. TY.
Hello.
Today I downloaded Office 2010 for my HD Mini. After completing the phone restarted.
I then tried to check my email, which failed with a 'no connection' error. I checked the the WiFi was on (it was) and tried again, no luck. I then noticed that the little 'Data Connection' icon was not displayed in the taskbar. I went to Settings>Wireless controls>Data connection and turned this on. Now I could check emails, surf the internet, all as normal. I am sure that this was being done using the WiFi due to the speed of pages loading. But surely I shouldn't need to turn on a Data connection, to use WiFi?
Mine is havin a similar problem. I am not able to surf even if I connet to my wifi. Only after enabling the data connection it starts work. Though I am not sure which internet its using. Since it was kind of slow.
Don't know for sure if its a bug or hardware issue but it is something. Someone pls help.
mkstevo said:
Hello.
Today I downloaded Office 2010 for my HD Mini. After completing the phone restarted.
I then tried to check my email, which failed with a 'no connection' error. I checked the the WiFi was on (it was) and tried again, no luck. I then noticed that the little 'Data Connection' icon was not displayed in the taskbar. I went to Settings>Wireless controls>Data connection and turned this on. Now I could check emails, surf the internet, all as normal. I am sure that this was being done using the WiFi due to the speed of pages loading. But surely I shouldn't need to turn on a Data connection, to use WiFi?
Click to expand...
Click to collapse
Well. I think I might have found the problem here. I was looking for the setting to turn Wi-Fi off automatically after a few minutes and I came across the setting for DNS Address, I have manually assigned an IP addresses on my Wi-Fi as otherwise my Apple Mac and Windows PC's can't see the printer, I had assigned an IP address and the Gateway address for the router, but I had not found the panel for DNS servers, I had assumed that the DNS server would be located automatically - it appears this is not the case and the HTC HD Mini was using the GPRS DNS server to locate the IP addresses before downloading the pages via the Wi-Fi connection.
So, if suffering from not being able to access the internet on Wi-Fi without a GPRS connection being made try the following:
Settings >
Wireless Controls >
Wi-Fi >
Advanced (Button) >
Adaptor and Networks >
Network Adapters (Tab) >
Tap on - Broadcom 802.11 Network Adapter >
Name Server (Tab)
Enter your router DNS server in the appropriate section
Click Done.
Not sure if this is required...
What is the DHD adapter???
I did enter both my IP and DNS settings here though... Just in case!
Tap on - Broadcom 802.11 DHD Network Adapter >
Name Server (Tab)
Enter your router DNS server in the appropriate section
Click Done.
Then back out of all the menus/pages.
This worked for me. Worth a try?