Related
I just bought the new T-Mobile (USA) MDA a couple days ago, a version of the HTC Wizard.
I have been able to connect with GPRS/EDGE, and seem to be getting EDGE speed, which is nice (my first EDGE phone).
However, no such luck with Wi-fi.
At my house, I can easily connect, at all times, with a few different wi-fi networks, with my wi-fi enabled laptop, and with my older PPC--an IPAQ 2210, with Spectec SDIO Wi-Fi card, can browse the web via Wi-Fi, etc.
The MDA does connect to Wi-FI, appears to be connected to it. (After turning it on in Connection Manager, of course.) But I cannot access any web sites with it. On trying to do so with PIE, I always get the error message:
"The page cannot be displayed or downloaded because the connection was lost, Check the connection and try again later."
I have not once been able to access one web site via Wi-Fi, with the MDA.
Can anyone help with this?
Thank you.
I ahve the same problem and have not figured out how to solve this...
Can anyone help us?
same problem here, also with t-mobile as provider. can it be a problem related to t-mobile???
me said:
I just bought the new T-Mobile (USA) MDA a couple days ago, a version of the HTC Wizard.
I have been able to connect with GPRS/EDGE, and seem to be getting EDGE speed, which is nice (my first EDGE phone).
However, no such luck with Wi-fi.
At my house, I can easily connect, at all times, with a few different wi-fi networks, with my wi-fi enabled laptop, and with my older PPC--an IPAQ 2210, with Spectec SDIO Wi-Fi card, can browse the web via Wi-Fi, etc.
The MDA does connect to Wi-FI, appears to be connected to it. (After turning it on in Connection Manager, of course.) But I cannot access any web sites with it. On trying to do so with PIE, I always get the error message:
"The page cannot be displayed or downloaded because the connection was lost, Check the connection and try again later."
I have not once been able to access one web site via Wi-Fi, with the MDA.
Can anyone help with this?
Thank you.
Click to expand...
Click to collapse
I have exactly the same problem
I guess you could try going under "Settings" "Connections" "Network Card" and make sure your network card is set to connect to "The Internet"
Select your wireless card and then make sure the drop down says "The Internet" and hit ok.
Also, make sure your GPRS Connection settings aren't setup to use T-Mobile's proxy. When your gprs is setup to use a proxy for web browsing, PIE will attempt to use the proxy with any connection. And by proxy, I'm not talking about an APN or anything.
Are you running security on your router? If so try shutting it off to test or try to connect to someone elses WiFi network to test.
wagz said:
I guess you could try going under "Settings" "Connections" "Network Card" and make sure your network card is set to connect to "The Internet"
Select your wireless card and then make sure the drop down says "The Internet" and hit ok.
Click to expand...
Click to collapse
I spoke with a TMob customer service rep about this a couple weeks ago, and this is basically what he told me to do. A T-Mobile HotSpot (Starbucks, etc) should work without making any changes. But if you want to use your own WiFi connection, you have to do the following:
Start Menu -> Settings -> Connections Tab -> Connections Icon
Select Advanced Tab -> Select Networks
Change first dropdown to "My Work Network".
Click OK, OK.
Then when you want to roam with GPRS/EDGE again, you have to change it back to "T-Mobile GPRS".
Very annoying to say the least. If anyone knows a better way to do this, I'd love to hear about it.
This works for me:
Start Menu -> Settings -> Connections Tab -> Connections Icon
Select Advanced Tab -> Select Networks
Change the first dropdown to My Work Network
Change the second dropdown to T-Mobile GPRS
Make sure My Work Network is set to connect to the internet, but has NO proxy settings.
Make sure T-Mobile GRPS is set to connect to the internet, but HAS proxy settings.
Magic!
frycow, you rock!!
That worked perfectly!! I hated that I had to keep switching networks whenever I wanted to go online via GPRS or wifi!!
Thanks!!!
frycow,
wow. that sounds great. but I can't get it working. could you take a couple minutes to walk me (and I'm sure others too) through your exact settings? especially the proxy settings.
thanks!
frycow is a freakin champ....that did the trick!! I've been WAITING to get this working!!
AHHHH, AND IT FINALLY GOT MY POCKET MSN TO START WORKING TOO!!!! Still doesn't work on GPRS, but it certainly works on Wi-Fi!! I suppose the last thing would be to get it working on both!! regardless, this is SWEET!!
I can´t get it working :evil:
When I Change the first dropdown to My Work Network and after that tryn to sync without having wifi enabled, the device does not connect with GPRS..., solutions...
frycow, hazchem, djswivel:
Could one of you help out Paltkugen and I? Both of us can't get it working. If you could let us know the specific settings, including the proxy settings, I would really appreciate it. Its so frustrating to know it works for some people, but not being able to get it going.
Thanks!
I did EXACTLY what fry posted....follow this carefully
Start Menu -> Settings -> Connections Tab -> Connections Icon
Select Advanced Tab -> Select Networks
Change the first dropdown to My Work Network
Change the second dropdown to T-Mobile GPRS
Click Edit on the My Work Network dropdown -> Proxy Settings Tab
Check the first box (This network connects to the internet), but NOT the second (This network uses a proxy server to connect to the internet)
Now do the same for the T-Mobile GRPS settins in the edit menu, only check both boxes this time. Then type in 216.155.165.50 as the proxy server. From there you should be good.
djswivel said:
I did EXACTLY what fry posted....follow this carefully
Start Menu -> Settings -> Connections Tab -> Connections Icon
Select Advanced Tab -> Select Networks
Change the first dropdown to My Work Network
Change the second dropdown to T-Mobile GPRS
Click Edit on the My Work Network dropdown -> Proxy Settings Tab
Check the first box (This network connects to the internet), but NOT the second (This network uses a proxy server to connect to the internet)
Now do the same for the T-Mobile GRPS settins in the edit menu, only check both boxes this time. Then type in 216.155.165.50 as the proxy server. From there you should be good.
Click to expand...
Click to collapse
That is exactly what I did too. Just tried it again and I can't use GPRS to surf. I have Wifi turned off. GPRS is not connected. I open PIE and go to some URL (google.com). GPRS starts connecting and successfully connects to T-Mobile GPRS.
Then, for about 30-60 seconds, the status bar says "Locating". Then an alert pops up that says "The page cannot be displayed or downloaded because the connection was lost. Check the connection and try again later."
Next, I turn on WiFi. It conects to my local WiFi network. It is still connected to T-Mobile GPRS too. I go back to PIE. As soon as I try to goto a URL, the GPRS connection drops, and again it says "Locating..." for a while. Then the same alert pops up again.
So now that GPRS isn't connected and just WiFi, I try going to the URL again. Same results.
Next I try turning off WiFi. Now there are no connections. I restart WiFi and there is just a WiFi connection. Same results in PIE.
I thought maybe the proxy is the problem, so I turned off the proxy in GPRS. When I do this, the checkbox "This network connects to the internet" won't stay checked. Even if I check it and click ok, when I go back it is unchecked. And when I did this, I couldn't even connect with GPRS. And with WiFi on, it would connect to Wifi, but going to a page would immediately pop up an alert that says "Cannot Connect with current connection settings. To change you connection settings, tap Settings."
I added the proxy back in and then tried changing the GPRS access point name from wap.voicestream.com to internet2.voicestream.com and internet3.voicestream.com. internet2 wouldn't even make a connection, but internet3 did. however, i still couldn't locate pages in PIE. So I changed it back to wap. I think my unlimited GPRS plan is configured the VPN way, so I remember having to use internet2 or internet3 in the past.
Could the proxy server not be working right for me? Is it possible that I cannot locate the proxy because I'm configured in a non-standard way (with a different access point - internet3) than most?
I think I'll call tmo and see if I can get changed to the regular AP (wap). I'm not using VPN stuff right now anyway. If anyone has other ideas, please let me know.
Thanks again!
I think i have a work around. but involes changing it back and forth when switching btwn wifi and gprs..
created two connections.
one with proxy and one without.
im only able to surf gprs with proxy.
when connecting via GPRS set both networks to connect to PROXY.
when using WiFi, set both networks to connect using NOPROXY.
that should work. at least it worked for me. tried only 2 pages and it loaded for both. GPRS used myvoicestream and wifi google.
yowzator said:
I have Wifi turned off. GPRS is not connected. I open PIE and go to some URL (google.com). GPRS starts connecting and successfully connects to T-Mobile GPRS.
Then, for about 30-60 seconds, the status bar says "Locating". Then an alert pops up that says "The page cannot be displayed or downloaded because the connection was lost. Check the connection and try again later."
Next, I turn on WiFi. It conects to my local WiFi network. It is still connected to T-Mobile GPRS too. I go back to PIE. As soon as I try to goto a URL, the GPRS connection drops, and again it says "Locating..." for a while. Then the same alert pops up again.
So now that GPRS isn't connected and just WiFi, I try going to the URL again. Same results.
Next I try turning off WiFi. Now there are no connections. I restart WiFi and there is just a WiFi connection. Same results in PIE.
I thought maybe the proxy is the problem, so I turned off the proxy in GPRS. When I do this, the checkbox "This network connects to the internet" won't stay checked. Even if I check it and click ok, when I go back it is unchecked. And when I did this, I couldn't even connect with GPRS. And with WiFi on, it would connect to Wifi, but going to a page would immediately pop up an alert that says "Cannot Connect with current connection settings. To change you connection settings, tap Settings."
I added the proxy back in and then tried changing the GPRS access point name from wap.voicestream.com to internet2.voicestream.com and internet3.voicestream.com. internet2 wouldn't even make a connection, but internet3 did. however, i still couldn't locate pages in PIE. So I changed it back to wap. I think my unlimited GPRS plan is configured the VPN way, so I remember having to use internet2 or internet3 in the past.
Click to expand...
Click to collapse
Earlier today I had been trying to get VM Net Browser or Resco File Explorer to work, and they *were* working, albeit very sporadically. Sometimes I could see whole windows network complete with shared files and directories, other times I could browse to my computer and it wouldn't show anything as being shared. Looking for a solution, i found this thread.
I followed the recommendations of the previous posts and got exactly the same results as yowzator, including the weird thing with the "This network connects to the internet" checkbox unchecking. My GPRS access point is also named wap.voicestream.com - not sure if that matters.
However, I know that I was having at least partial wi-fi success before trying this fix or I wouldn't be able to have seen my home network. So I gave up on this fix and put everything back to the default - GPRS for programs that automatically connect to the internet, no proxy, and My Work Network for programs that automatically connect toa private network, with "This network connects to the internet" unchecked because it's impossible to check it and expect it to stay checked.
I tried surfing around to a few pages with wifi only (connections shows me connected to my network, I turned off the phone icon in the comm settings, and tapping on the connectivity icon on the taskbar didn't have GPRS listed) and amazingly, some of them worked - though the "locating" process seemed to take a while, they sometimes seemed to load faster than with GPRS (especially if I let my MDA go to sleep and then turn it back on again).
And then they don't work again, without me doing anything. So I don't think the fix we've been trying is a true fix to the problem - if it was then then pages would *never* load with the proxy disabled. Right?
I've been wondering if the "modem" tab under My Work Network is supposed to be blank . . . even if it's using wifi it seems like a poor UI design to not have a checkbox or something saying "this connection is for wifi and not dialup".
I am using the 2.17 ROM update. My wireless router is a D-link DI-624 extreme g. I'm using WEP encryption.
I am crying . . . tears . . . of confusion.
SOLUTION!?
This works for me (suggested in another thread):
1. Add the following to the registry:
HKEY_LOCAL_MACHINE\COMM\TIACXWLN1\PARMS:
DWORD dot11SupportedRateMaskG=8
(Note that there is already a key in the registry called "HKEY_LOCAL_MACHINE\COMM\TIACXWLN1\PARMS: DWORD dot11SupportedRateMask=1" - you should leave this alone)
2. Do a soft reset.
3. Go to your wi-fi settings -> Power Mode tab -> Best Performance (without this step it didn't work for me)
4. Turn on wi-fi and connect to anything in internet explorer. It should seem blazing fast compared to GPRS.
Note that this assumes you haven't done any of the fixes in this thread. That is to say, leave it with GPRS for programs that automatically connect to the internet (with no proxy), and My Work Network for programs that automatically connect to a private network, with "This network connects to the internet" unchecked because it's impossible to check it and expect it to stay checked.
So far (for a few minutes anyway) this is working for me! Even Resco File Explorer seems to mostly work - I can map my PC's shared folders and see my stuff reliably, as far as I can tell. VM Net Browser is still wonky though.
The thread this solution comes from is http://forum.xda-developers.com/viewtopic.php?t=38898&start=0&postdays=0&postorder=asc
Hi,
tried that solution
(I have a thread below)
still falls over on "locate".
I have no home network so I have never got anything working - connects fine on a public hotspot, but as I say, fails on locate.
I've had enough - may either phone T-mobile pay CS - something I really don't want to do out of principle - or just send teh phone back.
any new info on this? can seem to get it to work.
i have configures it many ways as suggested above. only time i was able to browse on wifi was with no proxie was set up. i connect through another network, (the mda automatically hooks you up to all avalible networks) but that only lasted a few minutes.
is there even a chance i could someone at tmobile even help me??? anyone here call them and get got service/help with getting it to work?
thanks
skot
Hi,
I've just got a T-Mobile Vario. It connects fine on GPRS and PIE navigates to web pages.
I then try to connect to a free WiFi hotspot (I have no home wifi network to test on).
It *connects* fine. However, when I try to navigate to a web page it hangs on the "Locate" message, then times out.
I have searched the forum and read similar problems but with home networks not public hotspots- for example:
http://forum.xda-developers.com/viewtopic.php?t=46118
I tried the solutions suggested there but with no luck. Has anyone had similar problems?
I *really* need to get WiFi working (by the end of the weekend hopefully) as thats what I got the device for in the first place.
I am a WiFi virgin so any pointers will help.
ipl 1.06
spl 1.06
gsm 1.12.10
os 1.6.2.4
protocol version 4.0.13.23
ExtROM 1.6.2.105
Cingular 8125 WiFi fails
I have the same results. My router assigns my device an IP address with WiFi on, but I get the message "...the connection was lost." whenever I try to surf internet. If anyone understands how to set it up, we'd appreciate instruction that works (I'd like a Cingular user if possible) but I would also like to learn what the settings mean. Anyone have a link to network setup information? I have a WiFi network in my home which works for my wife's laptop and my old PDA. This 8125 is bugging me.
working now...
OK, as soon as I posted and went back to the PDA the WiFi connection now works - gremlins again... I didn't change anything or even soft reset - it just connected. I wonder if it was because the GPRS connection ended... I'll try turning off my automatic e-mail checking and post again. BTW, I am using the suggestion of the first Network being "work - no proxy" and the second being "MediaNet - proxy"
Your problem doesn't seem the same as mine.
I have no home network.
My vario, on a public hotspot, always "connects" but always fails on "locate".
you need to make sure the connection is not using a proxy server.
go into settings
connections
then manage existing connections
untick the checkbox on the proxy settings tab that says this connection uses a proxy (or words to that effect)
now you should be able to connect to the network as long as their is no security in place to stop you.
good luck
R
Hi,
I have no "manage existing connections"
under settings->connections.
I go into connections which gives <tasks> and <Advanced> tabs
Under Advanced> I have <select networks>
This screen "Network Management" has two drop downs
1 states "Programs that automatically connect to the internet should connect using"
"T-Mobile Internet" is selected
If I edit and look at proxy settings it has:
"This network connects to the internet" ticked
the proxy server box is empty
If I edit the modem tab it has Cellular Line (GPRS) selected
Dropdown 2 has
Programs that automatically connect to a private network should connect using:
the dropdown is filled with "My Work Network"
By default the "connects to the internet" box is empty. I have filled this in previously with no luck.
Modem is empty as are all the other entries.
I have swapped the order of the dropdowns, I have made both "My Work network" and both "T-Mobile Internet" with no luck.
I have tried the suggestions on the thread I referenced above - again with no luck.
To repeat I can get the "connection" up. When I select the network it states connection is "good" yet when I try to surf to a page it craps out on the "Locate" message.
Is it failing to find a DNS server on the wifi link?
I'm just guessing as I know v little about WiFi as I have never used it before
TIA for any further contributions
I just wanted to say I have this same problem and have not been able to solve it yet. I can't tell whether to use GPRS while using Internet, or whether I should have the connection set to "Work" or "Internet" or what.
I have tried with 3 unprotected wireless networks already and have gotten the same results with each. I suspect it may be due to DNS. Hopefully it is not the phone itself.
Hi mat,
Well it can't be that you *must* use GPRS whilst surfing - thats what WIFI is for!
I suspect (no real evidence)T-Mobile have somehow crippled the OS to make it difficult to work out how to get free hotspot access working properly. Looking at their site they say CS do not "support" WIFI access problems - how convenient!!!!!
Although I am a WIFI virgin/idiot, I am not a *total* idiot and would have been able to get it working if it was completely straightforward.
To add ammunition to this opinion, I do not have a T-Zone account (I should have but it hasn't been set up correctly). Anyway I tried to connect though a t-zone and it worked straightaway presenting me with the login page. I could also download data - the terms and conditions.
However, obviously I couldn't surf to totally check it out as I couldn't login.
I wish someone would provide a definitive solution as it is really irritating me now!!!!!
Why would it be hanging on "locate"? I imagine it must be because it cannot look up the IP address through the free WIFI link. I made the same suggestion as you did earlier something to do with the DNS setup.
Thats as far as I can get!!!!!
ok got my tzones proxy working flawless but now wifi refuses to work.. i can connect to wifi and get good signal but when i try to view a webpage with it thats a no-go it just says Connecting... on the IE taskbar and thats all then times out! i knwo this is probli a simple fix so someone help!
jacob-mda said:
ok got my tzones proxy working flawless but now wifi refuses to work.. i can connect to wifi and get good signal but when i try to view a webpage with it thats a no-go it just says Connecting... on the IE taskbar and thats all then times out! i knwo this is probli a simple fix so someone help!
Click to expand...
Click to collapse
I had the same problem. This is what I did to resolve.
got to start menu,settings,connections,then connentions again. then go to advanced, then select networks In the first box put my isp.(or create it). In the second box should be your t-zones settings.(dont edit)then hit ok twice and then exit to today screen. Give this a try, it worked for me.
The reason this is happening is because the proxy servers used by all major carriers are only available from inside thier network. Im not sure if it is because of DNS records are not provided from outside their network. Once you connect to the WiFi network, the proxy server is unreachable.
For other purposes than this, I have 2 networks setup. One with all the proxy settings for the cingulara network and one that doesn't have the proxy settings. Its easy enough to change when you just have to select a different network to connect to the "internet" with.
Can't have proxy server set up and use wifi too....
My first wizard had defective wifi card. I spent numerous hours with the tmobile support and HTC support to try and get it to work. The first thing they had me check was to disable proxy settings. Both tech supports straight out told me you can't have both. I once saw some thread where someone adjusted a lnk file or registry value so that when wifi was turned on, the proxy settings were disabled;when turned off they were re-enabled.
Hope that helps, Jess
I have a HTC Wizard running WM5. I am running a connection with proxy settings and one without. I can turn on wifi connect to IE and then turn off wifi. Re-open IE and gprs will connect and then load page. I did'nt need to use any special registry settings.
i have an i-mate Jasjar wm5, I am using USB activesync cable to connect my device to my desktop PC. I would like to access the internet using LAN-DSL in my office.
Any idea or suggestions on how to do it?
Suggestions, insights, or any kind of guidance is highly appreciated.
unless you have set it to block it
then your device connected to activesync will allways have the same
lan network access as the pc
you prob have to change connection in settings->connection->connection advantage and pick mynetwork rather then my isp
Rudegar said:
unless you have set it to block it
then your device connected to activesync will allways have the same
lan network access as the pc
you prob have to change connection in settings->connection->connection advantage and pick mynetwork rather then my isp
Click to expand...
Click to collapse
thanks for the quick reply. activesync (v4.5) is on the exceptions list of windows firewall, hence it is not blocked.
My Work Network connection settings (modem and VPN) is empty. do we have to input any settings on them (modem and/or VPN)? On the proxy settings - I checked the box for 'This network connects to the Internet', I did several tests on unchecking/checking the box on 'This network uses a proxy server to connect to the Internet' - tried both IP of my desktop PC (192.168.1.12) and default gateway (192.168.1.1) on ports 8080, 80. I noticed though - the box for 'This network uses a proxy server to connect to the Internet' - always goes unchecked everytime I go back to check the settings.
i did several test settings, but it doesn't worked either. always it says 'This page cannot be displayed, connection was lost check settings'
any idea on these? thanks for your time
guess you could try changing the dns to what the pc is using
and try with other applciations like the network tools ping
and messenger to see if it's a IE issue
I also want to connect to internet through activesync 4.5 usb
hi, i have the same problem, i want to connect to internet through activesync 4.5 and wm5 herms. i am not good a computer use so could you please guide me step by step. i can synchronize but can't use internet.
if its through the office network, you may need to play with some settings to "fool" the office network to let you out.
The way to check what im talking about is to download http://johnhaller.com/jh/mozilla/portable_firefox/ portable firefox, and see if it connects by default. In my office, i had to input the LAN proxy settings into firefox to make it work. If this is the same for you, then i guess you'll have to do the same on the PPC. If you do find that this is the problem, and you cannot connect with firefox, post back and ill see if i can help
Turn off "Advanced Features"
explorer2612 said:
thanks for the quick reply. activesync (v4.5) is on the exceptions list of windows firewall, hence it is not blocked.
My Work Network connection settings (modem and VPN) is empty. do we have to input any settings on them (modem and/or VPN)? On the proxy settings - I checked the box for 'This network connects to the Internet', I did several tests on unchecking/checking the box on 'This network uses a proxy server to connect to the Internet' - tried both IP of my desktop PC (192.168.1.12) and default gateway (192.168.1.1) on ports 8080, 80. I noticed though - the box for 'This network uses a proxy server to connect to the Internet' - always goes unchecked everytime I go back to check the settings.
i did several test settings, but it doesn't worked either. always it says 'This page cannot be displayed, connection was lost check settings'
any idea on these? thanks for your time
Click to expand...
Click to collapse
There's a setting in ActiveSync "Advanced" and uncheck the box. See if that helps. It apparently has helped others with USB connection issues.
rightclick on ActiveSync icon on systemtray --> connection settings... ---> config as my pic you can access internet thought your PC. If you still can't connect to internet please hardreset your PDA
Okay, this has been bugging me for a long time, so I decided to solve this by myself once and for all.
Situation:
1. GPRS requires a proxy connection
2. WiFi and ActiveSync (A.S. on PC when connecting to an Exchange Server) "inherit" the same GPRS proxy settings, and are unable to connect to that proxy server, which make them both unusable.
So, naturally, I configured "The Internet" connection to use the GPRS access point and the GPRS proxy,
And "My Work Network" to be an internet connection WITHOUT a proxy.
But for some reason, that doesn't work.
The connections tab doesn't let "My Work Network" to be a "proxyless" internet connection.
I tried many configurations, trying to fool the wifi connection, until I got to a final solution that works.
The wifi knows to pick the connection without the proxy, so does the activesync, and so does the default GPRS connection, when no other connection is present, automatically!
So, the solution is this:
1. Go to the Start->Settings->Connections->Advanced tab->Select networks
Under "Programs that… Internet should connect using"
Click New to create a new connection:
Name for settings: Direct Internet
Modem: Leave Blank
Proxy Settings:
This network connects to the internet [Check]
This network uses a proxy [Uncheck, or Check and fill in your home proxy settings]
Click OK.
2. Under "Programs that… private network should connect using"
Click New to create a new connection:
Name for settings: GPRS Internet
Modem: Click New, and follow the wizard to add your GPRS access point.
Proxy Settings:
This network connects to the internet [Check]
This network uses a proxy [Uncheck, or Check and fill in your GPRS proxy settings]
Click OK until all windows are closed.
3. Now we need to get WiFi and AS to use the "Direct Internet" we created.
Go to the Start->Settings->Network Cards (Or Wi-Fi for some OSs)->Network Adapters tab
My Network card connects to:
set "The Internet"
(This will make your Wifi choose the "Direct Internet" connection, with the proxy you specified, or without a proxy)
4. On your PC, Open the Microsoft ActiveSync Window (Make Sure you have ActiveSync 4.5 or higher)
Click File->Connection Settings
This computer is connected to:
set "The Internet"
(This will make your ActiveSync inherit the "Direct Internet" connection, with the proxy you specified, or without a proxy)
That’s it, you're done!
The beauty is that Windows mobile knows it needs to use the "GPRS Internet", only when other connections are not present.
Now you don't have to mess with selecting a proxyless connection when connecting to a WiFi source, or using activesync
thank you very much for this, has helped very much.
i think this is a brilliant work around...... thank u soooooooo very much... i have been banging my head endlessly to try and find some solution to the problem i had.... and nothing could have been better than this....
:cheers:
Shlomki is there any way i can force MS Exchange to use AS when cradled? coz somehow it connects using GPRS even when cradled and connected to AS...
i'm happy to hear it helped you both!
phreaker18 said:
Shlomki is there any way i can force MS Exchange to use AS when cradled? coz somehow it connects using GPRS even when cradled and connected to AS...
Click to expand...
Click to collapse
if you followed the steps exactly as i described, exchange SHOULD use AS (your PC's internet connection). that's how its working for me right now.
when cradled and connected to AS, did you try browsing to a website to see which connection it tries to use? try to use PIE and see if it tries to connect to the GPRS or the PC's internet connection.
if it uses GPRS also, there might be a problem with your settings..
Repeat stages 1 & 4, they are critical for that matter.
Try stage 1 without entering a proxy server. just uncheck the proxy settings and check "This network connects to the internet".
Shlomki do u think i should uncheck enable advanced networking in settings--> connections-->USB to PC....?? do u think that maybe the problem creator?
shlomki said:
2. Under "Programs that… private network should connect using"
Click New to create a new connection:
Name for settings: GPRS Internet
Modem: Click New, and follow the wizard to add your GPRS access point.
Proxy Settings:
This network connects to the internet [Check]
This network uses a proxy [Uncheck, or Check and fill in your GPRS proxy settings]
Click to expand...
Click to collapse
when i complete step 2 [without checking proxy settings] and go back to see if this connects to the internet is checked or not it is always unchecked even though i check it some seconds more... am i doing something wrong here?? i dont think my GPRS connection uses any proxy settings...
phreaker18 said:
when i complete step 2 [without checking proxy settings] and go back to see if this connects to the internet is checked or not it is always unchecked even though i check it some seconds more... am i doing something wrong here?? i dont think my GPRS connection uses any proxy settings...
Click to expand...
Click to collapse
yes, it happens to me also. i think thats the way they intended it to be.
when you use a proxy with the work network, it doesnt uncheck the internet option.
are you using a proxy at all?
no i dont use a proxy..... i connect to the internet using a cable modem... n between the cable modem and the PC is my netgear WiFi router...
then why did you follow a post that's inteded for proxy connections
just select your proxyless gprs settings as your internet connection, and set active sync (on the pc) and network cards (on the ppc) to use "the internet".
im sorry if i didnt make myself clear.... i had proxies... since ur method didnt work i changed the whole setup on my PC and now i dont use a proxy...
but ur post was very informative nonetheless..
thank u again
shlomki said:
Okay, this has been bugging me for a long time, so I decided to solve this by myself once and for all.
Situation:
1. GPRS requires a proxy connection
2. WiFi and ActiveSync (A.S. on PC when connecting to an Exchange Server) "inherit" the same GPRS proxy settings, and are unable to connect to that proxy server, which make them both unusable.
So, naturally, I configured "The Internet" connection to use the GPRS access point and the GPRS proxy,
And "My Work Network" to be an internet connection WITHOUT a proxy.
But for some reason, that doesn't work.
The connections tab doesn't let "My Work Network" to be a "proxyless" internet connection.
I tried many configurations, trying to fool the wifi connection, until I got to a final solution that works.
The wifi knows to pick the connection without the proxy, so does the activesync, and so does the default GPRS connection, when no other connection is present, automatically!
So, the solution is this:
1. Go to the Start->Settings->Connections->Advanced tab->Select networks
Under "Programs that… Internet should connect using"
Click New to create a new connection:
Name for settings: Direct Internet
Modem: Leave Blank
Proxy Settings:
This network connects to the internet [Check]
This network uses a proxy [Uncheck, or Check and fill in your home proxy settings]
Click OK.
2. Under "Programs that… private network should connect using"
Click New to create a new connection:
Name for settings: GPRS Internet
Modem: Click New, and follow the wizard to add your GPRS access point.
Proxy Settings:
This network connects to the internet [Check]
This network uses a proxy [Uncheck, or Check and fill in your GPRS proxy settings]
Click OK until all windows are closed.
3. Now we need to get WiFi and AS to use the "Direct Internet" we created.
Go to the Start->Settings->Network Cards (Or Wi-Fi for some OSs)->Network Adapters tab
My Network card connects to:
set "The Internet"
(This will make your Wifi choose the "Direct Internet" connection, with the proxy you specified, or without a proxy)
4. On your PC, Open the Microsoft ActiveSync Window (Make Sure you have ActiveSync 4.5 or higher)
Click File->Connection Settings
This computer is connected to:
set "The Internet"
(This will make your ActiveSync inherit the "Direct Internet" connection, with the proxy you specified, or without a proxy)
That’s it, you're done!
The beauty is that Windows mobile knows it needs to use the "GPRS Internet", only when other connections are not present.
Now you don't have to mess with selecting a proxyless connection when connecting to a WiFi source, or using activesync
Click to expand...
Click to collapse
Thank you so much for this work around. You don't know how long I have been fighting this problem. What an elegant solution!
I think that I might try to abuse this to let other porgrams connect using T-mo GPRS since it seems that only web works when the Proxy is on, and other things work when its not.
woah
shlomki your the man!!!!
wahhhh
stumbled said:
shlomki your the man!!!!
Click to expand...
Click to collapse
ei shlomki, i use ur configuration for two days, after that I can't connect to my wifi router anymore
what will i do?????
stumbled said:
ei shlomki, i use ur configuration for two days, after that I can't connect to my wifi router anymore
what will i do?????
Click to expand...
Click to collapse
are you using wm6?
wm6 roms have a known issue with connecting to some secured networks.
try to set your router to allow unsecured connections and reconfigure your wifi settings in your ppc.
if it connects fine, the problem is with the wifi drivers.
shlomki said:
are you using wm6?
wm6 roms have a known issue with connecting to some secured networks.
try to set your router to allow unsecured connections and reconfigure your wifi settings in your ppc.
if it connects fine, the problem is with the wifi drivers.
Click to expand...
Click to collapse
im using WM5 in my Xda IIs blueangel...
what will i do?
stumbled said:
im using WM5 in my Xda IIs blueangel...
what will i do?
Click to expand...
Click to collapse
i don't know, sorry.
but it has nothing to do with proxy settings.
go to the blueangel forum in xda-developers and ask for help...
good luck
Hi Shlomki.
Followed the instructions when trying to connect with explorer it says cannot connect with these settings after further investagation for some reason the this connection connets to the internet check box won´t stick on the new connection we made or on work connection every time i go back to check it it´s unchecked again any ideas thanks
Dave
pftg4 said:
Hi Shlomki.
Followed the instructions when trying to connect with explorer it says cannot connect with these settings after further investagation for some reason the this connection connets to the internet check box won´t stick on the new connection we made or on work connection every time i go back to check it it´s unchecked again any ideas thanks
Dave
Click to expand...
Click to collapse
read the manual again, from start to finish, and do not skip a word.
if you're not using a proxy in your "Work Network Settings", this manual is not for you.