Hi,
I have upgrade to the latest rom 20060426B1WWE.
When I get a call the GPRS is not suspended.
Can sameone with the old rom check how it works?
http://www.seeo2.com/support/XdaAto...ll&faq_id=1394&type=faq&category_id=197#q1394
Q7 Will GPRS get disconnected if a phone call comes in?
Answer:
Priority will go to phone calls. Thus, GPRS will be suspended during the call and automatic resumed after the call.
Maybe a bug?
JoseF
Hi,
The point is a don´t get the call. It goes direct to the voice mail.
If using Wifi then the connection drops and I can answer the call.
Any ideas why
JoseF
Yes same here in india with Cellone service, i installed all the three roms available on this site and some setting combinations ie network to automatic / manual etc
the problem persists, i have a unlimited gprs package with the service but cannot use, i tested the sim on P910, Nokia 6680 works perfectly, so not a sim problem not a service problem, it is the problem with O2 Atom, having this problem since day one
hope newer roms will have this problem solved
GPRS can use 1, 2 or 4 data slots depending how busy the cells (towers) are in your area. If you happen to be using 4 slots and you get a call the call will not get through, if you're only using 1 or 2 slots then your call can get through...
Pot luck really...
JohnK1973
thanks for the info,
but i do not know if the setting you mentioned is changable, as ichecked my atom there is no option, i checked immedialetly one after the other once on atom and next on P910 same location same chair same room, it works on P910 but not on atom i can confirm because i called the cell from my landline (the land line is of different service provider)
Hello
Some days ago I received my HTC Shift and I am very satisfied!
Unfortunately there is one strange Problem:
I am using a MultiSIM by T-Mobile, that means I have one number for multiple devices.
If the HTC Shift would make phone calls and someone calls me, the shift and my MDA Vario III would be ringing.
When I activate the Modem in my Shift it seems the Shift receives phone calls and then denies them! So nobody can call me when I am using my shift, since all calls are directed to my mailbox
Has anyone of you an idea what can I do?
(btw: I unlocked my Shift already to full WM6 )
The shift doesnt support phone calls...even if you have on sim card it wont ring
Use it for its gprs/edge/3g and sms sending n receiving
rdosti said:
The shift doesnt support phone calls...even if you have on sim card it wont ring
Use it for its gprs/edge/3g and sms sending n receiving
Click to expand...
Click to collapse
Hello
thats exactly what I like to use the shift for. I am not interested in making phone calls with it.
But the Shift is blocking calls, which should also arrive on my mobile phone...
I think HTC has made this blocking to avoid connection problems when somebody tries to calls the shift (which is not supported).
Is this right?
Might work?
I don't know for sure about T-Mobile. I am using a similar service (they call it "FlexiCard") from E-Plus. They have a function that allows you to designate one of your SIM cards as the primary card. This is the card that will receive calls (and SMS) first, only if this card is not active (phone turned off) or busy a call or SMS will be routed to the other card.
However, there seems to be a service difference between T-Mobile and E-Plus: I have the SIM card in my Shift still designated as the "primary" card. If the modem is turned on, this is interpreted by E-Plus as "busy", so calls go to my phone (which holds the "secondary" card). If the modem is turned off, the SIM card in my Shift is obviously inactive and not visible to the mobile network. So the only reason for me to switch "primary" vs. "secondary" would be to continue receiving SMS messages on my phone rather than the Shift. Unfortunately, for SMS E-Plus does not bother whether the "primary" card is active / busy or not, SMS always go to that card (understandable when you look at how SMS works on mobile networks).
If you don't find any information about switching primary/secondary card in your documentation that came with the card I suggest contacting the T-Mobile hotline. They should be able to tell you whether this functionality is available with your "MultiSIM" and how to switch "primary" between the cards.
Thank you mw65719 four your tip.
I just phoned with T-Mobile support.
They don't support it like Eplus to switch between SIMCards.
It is just possible to define a primary card for SMS service, not for phone calls. Whenever someone calls me both phones are ringing.
So I will have to buy a new contract with T-Mobile just for data transfer, which is more expensive than the combination of phone/data contract.
I have the same issue with the MultiSIM from t-mobile. Both phones (the other one is a Touch) are ringing, after the first ring a line-busy message is generated.
Seems that the Shift in canceling the incoming call after the first ring.
Does anyone has an idea to solve this problem instead of splitting the MultiSIM into two separate contracts?
Have just opened a suuport case at HTC Europe concering this issue. Seems to be a German (and t-mobile) specific problem.....
speech service ?!
gsiakoe said:
Seems that the Shift in canceling the incoming call after the first ring.
Click to expand...
Click to collapse
find out how the call canceled
a: is it the 3g modem that set the networkstatus to -> data service only
b: or a apllication that will call canceled - reason busy
see here what i mean
http://www.t-mobile.de/downloads/laptop/hyperterminalmulti-sim-anleitung.pdf
I think it's part of the WinMo/SnapVue side.
Vista enables a lan connection with WinMo for internet.
So there could be settings in the registry to enable/disable this busy status.
I try to find somethin, but unfortunately i'm not a pro like others here in the Board.
Where are you folks, on Planet Mars, everyone and all documents I read say that the Shift cannot support phone calls???????
alexn2 said:
Where are you folks, on Planet Mars, everyone and all documents I read say that the Shift cannot support phone calls???????
Click to expand...
Click to collapse
it can be made to recieve them though. we all say Bengalboy's pics. about the phone calls being blocked. that does suck. i guess we have to wait till the phone side is re activated.
Idea how to activate phone pad
Pawel062 said:
it can be made to recieve them though. we all say Bengalboy's pics. about the phone calls being blocked. that does suck. i guess we have to wait till the phone side is re activated.
Click to expand...
Click to collapse
I had some phone calls with T-Mobile Business support and they told me a trick how to activate the phone function, but I dont get this to work.
What I have to do is the following:
1. Download and install a hyper terminal application on Windows mobile (I found http://www.cambridgevx.com (Server seems to be down at the moment))
2. Open a direct connection to the modem
3. Enter the following commands:
3a: AT_odo?
(this should show 1 which means speech is deactivated
3b: AT_odo=0
(speech is beeing activated)
4. Reset Windows Mobile and the phone should be activated
I was told this is known to work on some data modems and should work on the HTC Shift too.
But always I try setp 2 I get an error "cannot open data connection"
Has anyone an idea?
Irgendware said:
I had some phone calls with T-Mobile Business support and they told me a trick how to activate the phone function, but I dont get this to work.
What I have to do is the following:
1. Download and install a hyper terminal application on Windows mobile (I found http://www.cambridgevx.com (Server seems to be down at the moment))
2. Open a direct connection to the modem
3. Enter the following commands:
3a: AT_odo?
(this should show 1 which means speech is deactivated
3b: AT_odo=0
(speech is beeing activated)
4. Reset Windows Mobile and the phone should be activated
I was told this is known to work on some data modems and should work on the HTC Shift too.
But always I try setp 2 I get an error "cannot open data connection"
Has anyone an idea?
Click to expand...
Click to collapse
problem there is no phone pad aka dial pad in production models as far as i know. so even if u can re enable it u wont have any images etc... it'll most likely require a custom rom or if we get lucky a cab.
Pawel062 said:
problem there is no phone pad aka dial pad in production models as far as i know. so even if u can re enable it u wont have any images etc... it'll most likely require a custom rom or if we get lucky a cab.
Click to expand...
Click to collapse
I am not interested in using the phone pad.
I like to solve the busy line problem (read some posts above). When activating the speech on modem side, this would be solve and I could use my Shift with my MultiSIM-Card
Irgendware said:
I had some phone calls with T-Mobile Business support and they told me a trick how to activate the phone function, but I dont get this to work.
What I have to do is the following:
1. Download and install a hyper terminal application on Windows mobile (I found http://www.cambridgevx.com (Server seems to be down at the moment))
2. Open a direct connection to the modem
3. Enter the following commands:
3a: AT_odo?
(this should show 1 which means speech is deactivated
3b: AT_odo=0
(speech is beeing activated)
4. Reset Windows Mobile and the phone should be activated
I was told this is known to work on some data modems and should work on the HTC Shift too.
But always I try setp 2 I get an error "cannot open data connection"
Has anyone an idea?
Click to expand...
Click to collapse
souds interesting ! .. have you try some scenarios ? with 3G enabled, with 3G disabled, with wifi enabled, with wifi disabled ... etc ?
I can't try myself.. but as there are data connection through 3G.. I think that it is possible to find a solution to the step 2 !
Anybody found a solution for this?
Getting my shift soon, and im going for a twin sim solution. would suck if i cant get phone calls on my kaiser cos the shift is on in snap vue mode and rejects the calls.
I am experiencing the same Problem with my Shift.
It is crazy, because my Mobile rings a halt time, then the Shift rejects the call. Afterwards, I have to call back.
The problem should be able to solve, but you have, anyhow, to tell the shifts modem not to reject voice calls. Still, I do not know how to tell the modem
Hello?
Has anyone resolved this issue? I'm a new MultiSIM user, and the idea of not having any internet with my shift is ****ing me off (that would make it as useful as a brick ).
Any resolution is appreciated.
Cheers.
HI @ all, i don´t know, if you fixed that problem.
I´m a multi SIm user too. With the original Radio Version (shipped with german SHIFT) the same problem. After that, i update the radio Version to the Phone edition radio Version:
see:
http://forum.xda-developers.com/showthread.php?t=486234
(but here always my WinCE Side was really slow??) so I Downgrade back the phone edition
1.27.35.28 and ce OS version 5.2.1620 (I00 ROm I think)
And now, Phone is working, and never the Multisim usage hangs up.
I don´t know why, i play every 1 month with Shift and upgrade, downgrade something, then the most time shift is not in use, so i don´t make a history what happend...
:-(
But with the new radio Version it will work.
maybe this rom work too:
Cmonex posted another radio for backup. This radio is for original rom (ie all other roms from the forum). Look for the link on page 5, or here
http://rapidshare.com/files/20211808...ift1582123.zip <- this is not for the phone or for this rom
Mirror: http://www.mediafire.com/?sharekey=7...e6ba49b5870170
Irgendware said:
Hello
Some days ago I received my HTC Shift and I am very satisfied!
Unfortunately there is one strange Problem:
I am using a MultiSIM by T-Mobile, that means I have one number for multiple devices.
If the HTC Shift would make phone calls and someone calls me, the shift and my MDA Vario III would be ringing.
When I activate the Modem in my Shift it seems the Shift receives phone calls and then denies them! So nobody can call me when I am using my shift, since all calls are directed to my mailbox
Has anyone of you an idea what can I do?
(btw: I unlocked my Shift already to full WM6 )
Click to expand...
Click to collapse
it happens with all multiple sims when you have all the devices activated!!!...
when you have multiple sims and you have all the devices open...
which device should accept the call ??
it does not work as douplex land line... not all of your mobile devices should ring at the same time ... obviously the one that was opened first and got the signal from your provider should get the line...
the twin sim solution works fine with me ... plus unlimited internet access from phone and the shift...
BUT one device open at a time ...
Hi All,
I'm new to smart phones, and I'm pushing my comfort zone a little here, so please bear with me!
I've just got a new XDA Orbit 2 on O2 in the UK (which I believe is virtually the same as the Polaris, with a bit of customisation by O2) and I'm trying to get VOIP working over wifi (I have no interest in using it over 3G - this is a banned activity by the network provider).
I've tried to follow instructions on this forum, but seem to have got stuck.
I've downloaded and installed WM6VoIP.CAB and SetupVoIP_V0.3.CAB, and after some playing I think I've managed to get the right settings into SetupVoIP - it now says on the Today screen "Internet Calling: Available".
However, when I try to make a call, it still says service provider is O2, and calls are being routed over their network - even though I've got it set to use the internet "Whenever available" (I've even tried turning off the "phone" so that the only option is to route calls over the internet, but it didn't - it was just unable to make the call).
Has anyone sucessfully got VoIP working on this version of the phone? If so could you please help me - it would be really useful if I could use VoIP from home where I've got WiFi!!!!
I have a VoIP account with voiptalk.org
Many thanks for your help
Charlie
same here...
bump!
Please help someone!!!
If it says Internet Calling: Available. Tap it and it will change to Internet Calling: Selected. Then calls will be routed through your WiFi
Is there no SIP client that brings VOIP to Windows Mobile?
Try Agephone Mobile 2. Best VOIP software I've tried to date.
Hello Everyone,
I really don't know if this post will be in the right place. I have been reading this forum for quite some time now and i can't find that many direct references to the HTC 3600i. Is the "Trinity" actually the 3600i?
Anyway, to the point of the post.
I have a HTC 3600i, purchased in Australia from carrier 3 (Hutchison 3G Australia). It is the original ROM from the carrier and never had Internet Calling enabled.
I have downloaded a collaboration of cabs that re-enabled this feature, allowed me to configure my SIP details and i could actually make and receive SIP calls using the handset. My problem is that regardless of what i do or what CAB / DLL / RegHack i do i cannot seem to get any sound through the ear speaker nor the loudspeaker.
The person i call (or the person that calls me) can hear me fine, i just cannot hear anything through the handset.
My desire to use the build in WM6 Internet Calling feature comes from being frustrated over trying about 5 different SIP phones that failed to excite me (as they cannot integrate with the phone ear speaker - like when you make a normal phone call, nor can they integrate with my address book).
Any information that could be shed upon this situation would be greatly appreciated (eg. how to make it so i can hear the person i am talking to using the Internet Calling feature). I am quite new to this scene but am very excited to get involved.
Hi please help. I have an unlocked phone (Windows Mobile 6.1) with no sim card that I am able to surf the net on my WIFI, but have not figured out how to make a call. I am able to sign in to my Gmail account where I have GV and can dial a number. It calls my home phone, which is what it is set up to do.
My question is what do I need to add to get a free phone number and then my GV can call it, which would be my cell phone? Do I need anything else? Again, just looking for a reliable and FREE way to make outbound calls to anyone in the US. Meaning not Skype or Fringe where free calls are to other members.
Thanks!