Hello,
When the light captor detect that you are calling, the screen is turning off.
Why it isn't turning on when you end the call ?
Is it possible to custurmize it ?
thanxxx
oioioioioioi said:
Hello,
When the light captor detect that you are calling, the screen is turning off.
Why it isn't turning on when you end the call ?
Is it possible to custurmize it ?
thanxxx
Click to expand...
Click to collapse
You can use hd tweak or advanced configuration tool to set this up.
yes, but you can just activate or desactivate the option (phone option).
I activated it but the screen is not turning on when i end the conversation.
I have the same problem here. The screen goes off when receiving but I don´t get the screen on when I finish OR when I take the phone away from the ear.
I remember this problem before i install programs.
Is it the same for you ?
I don't think hard reset resolve this.
i ve this problem too. any help?
Same for me, and tweaking the HDTweak settings/AdvancedConfig settings didn't change anything.
Maybe because I tested in the evening on the street though...will report tomorrow when I get a call during daylight
UP
Pleeease !
Related
Every time i call someone, when they answer the call the screen turns off.
If i want to end the call or do anything else i have to turn the screen back on before i can press end.
Is there a way to stop this happening?
I have tweak_HD and changed all the settings on that but it still does it.
You have a soft key down to the right for ending calls. The screen turns off so you can stick the phone between your shoulder and ear if you must do something with your hands while in a call and thus not click something with your ear or face
The same problem.
Tweak HD did not resolved this issiue. Any other ideas cause it's relly annoying from mu point of view
already discussed
this is aproblem discussed many many time, is an energy setting. with HD tweak i think you can solve problem. but when you are in a call and screen goes to sleep tap on the on/off button of the blackstone and your screen retake from sleep.
pitt1983 said:
this is aproblem discussed many many time, is an energy setting. with HD tweak i think you can solve problem.
Click to expand...
Click to collapse
I got Tweak HD and like I said before - it did not solve this problem
pitt1983 said:
when you are in a call and screen goes to sleep tap on the on/off button of the blackstone and your screen retake from sleep.
Click to expand...
Click to collapse
I belive we're looking for solution which doesn't involve any buttons
The best solution should be to use the "light sensor" to turn on the screen soon as we remove the phone to our ear
I have heard that S2U2 (freeware) automatically turns the screen off when a call is connected and then automatically turns the screen back on when the call is disconnected. If you want to use the screen during the call, you need to slide your finger on the screen to unlock it.
I'm not sure if this directly addresses your problem, but it might be an option to try out. I have never used S2U2, so unfortunately I cannot confirm what it can and can't do or how well it does what it does.
MonteCristoffOn said:
After searching all day long (and testing too)... Good news for #1.3! I've found it!!! (poor HTC guys who want to hide all their tweaks...)
So, I will publish a new version tonight with this and some other minor corrections.
Don't forget to ckeck it via AppToDate (thanks again Paul, for this great neat app).
Click to expand...
Click to collapse
from Tweak HD thread
Well, we will check it in the evening than
I just got new HTC Diamond HD phone from Orange.
Whenever I make a call, the phone goes to standby and I have to turn it on again from the top.
This does not happen if the phone is kept straight, only happens when the phone is close to the ear (may be some sort of light sensor).
Please help.
I have tried a few setting in registry but it still same.
Hi
maybe u can try THIS
sure this is what you are looking for...
cheers
Try a hard reset. My phone was hanging during a call. After hard reset everything ok
PhaseIV said:
Try a hard reset. My phone was hanging during a call. After hard reset everything ok
Click to expand...
Click to collapse
That don't work, still goes off (light goes off), as soon as I dail a number and take to my ears. Phone is still connected and talking the actual handset goes off.
press the home button and the screen comes back on.
or pull the stylus out
thanks for your advise.
Any more ideas, keeps it awake without using stylo or press home page key.
Firstly, it's HTC TOUCH HD, not diamond hd.
Secondly, I think you are talking about protection during the call. If u'll turn it off, u would press some buttons or even hang with your ear
Sorry, It is HTC Touch HD.
I have cound the way to fix it.
This problems is caused due to the light sensor. This setting can be disabled.
I download HD tweak form http://montecristoff.webs.com/ and disabled the light sensor and it all works fine.
Thanks to all
I have big problems when i speak in the phone, almost everytime i hang up a few apps have started. Is there a way to deactivate the touchscreen or something when a call is active?
Simply press the power button to deactivate the screen.
Am I missing something?
I always had this till I realized you could turn the screen off during a call. I have a few programs installed, Inesoft being one of them. I believe it's that which auto turns my screen off when I accept an incoming call.
vwrmic said:
I always had this till I realized you could turn the screen off during a call. I have a few programs installed, Inesoft being one of them. I believe it's that which auto turns my screen off when I accept an incoming call.
Click to expand...
Click to collapse
Thanks, that sounds great. I will check it out!
XperiaTweek has an option for this too afaik
please correct me if I am wrong, but i think the Xperia default setting is that the screen IS turned off during a call!
Xperia Tweak offered the option to switch this off and leave the screen on
stetre76 said:
please correct me if I am wrong, but i think the Xperia default setting is that the screen IS turned off during a call!
Xperia Tweak offered the option to switch this off and leave the screen on
Click to expand...
Click to collapse
Think you're right
Do you know the registry key behind this?
if someone can make a program to relate the light sensor with the screen off, coz when am using my BT headset i dont want my screen to be off and when i dont use it i want the screen to be off, so if has a light sensor we should utilize it saying "during a call when u see light dont go off coz it means he is using BT headset otherwise screen is off" or if we can know from BT activity, again a program saying if ur using phone then off is ur using BT Headset then dont off"
regards
Rabia said:
if someone can make a program to relate the light sensor with the screen off, coz when am using my BT headset i dont want my screen to be off and when i dont use it i want the screen to be off, so if has a light sensor we should utilize it saying "during a call when u see light dont go off coz it means he is using BT headset otherwise screen is off" or if we can know from BT activity, again a program saying if ur using phone then off is ur using BT Headset then dont off"
regards
Click to expand...
Click to collapse
Wouldn't it be easier to tell x1 not to screen off when using a Bluetooth headset? or when wired headset is plugged in? But you idea sounds cool too.
it would only the application that does that requires a restart switching between options which makes it a bit inconvenient
Rabia said:
it would only the application that does that requires a restart switching between options which makes it a bit inconvenient
Click to expand...
Click to collapse
I mean X1 does it automatically with my idea. ??
Wouldn't it be easier to to write a program for X1 to know when there's a bluetooth/wired headset connection then mess with the light sensor?
But either would be cool....if possible.
My X1's screen is switched ON by default when I get a call. Its pretty annoying actually.
FURTHERMORE, I've got a password lock on it. So if I speak longer than 5 mins (thats the limit I put for the password), then when I end the call, it asks me for the unlock code before I can see the today screen again!!
Can someone tell me if there's a solution to this??
Thanks
Hi,
I had a problem with my Jade where the LCD screen blackout while making a call out, and i need to turn the screen on again pressing the power button.
Can anyone advise me?
Thank you in advance for your advise.
Vincent
No problem, is a normal function
Yup, that's normal behavior. There is a sensor which senses when you have the phone touching your face. It then turns the screen off. You wouldn't want it to activate all kinds of options while rubbing your face.
Thanks a lot! but Garmin problem now..
Hi ralfbonne, Arunia,
Thanks alot for your advise.
I have another problem which is the Garmin Mobile XT 5.00.10W.
Is a cracked version, after i installed S2U2 v1.60, the below error message pops up while half way using the Garmin GPS:
"Read access violation at data address 0xF9C3D650. Program address 0x0016FAF4 in background thread NULL (GfxFieldWindowProc)".
Is this caused by the settings for S2U2?
Besides, sometimes it took too long time to get the satellites signals, can be up to 20mins long!
Could you please kindly advise me too?
Thanks in advance.
Have a nice day.
Vincent
How to keep screen on in call (no blackout): solution
All registry hacks & Advanced Config tricks for keeping the screen on while a call is in progress do not apply to the Jade/3G.
However, there is a solution to overcome this annoying feature:
install Touch InCall Screen Tweak, and set the options "Ignore first screen off" and "Always On" in the options.
Why keep the screen on during call? Your face will just start activating things at random. If you really need it on (maybe using earpiece) you can always press the power button.
It's annoying
I have never accidently pressed anything on the screen while calling.
However, having to press the power button to bring the screen back while calling voicemail has annoyed me many times.
I also believe it is annoying that the screen blacks out. Even when I have the phone facing down and not to my ear, the screen blacks
I need to get it on, so I could use speakerphone. I'm one of those that love using speakerphone, so yea
I will try the InCall cab file.
Hi need help... i am using WM6.5 Onyx rel 5.2 and i need a way by which i can turn off the backlight when a call gets connected. Currently the phone vibrates when the call gets connected.
I also wrote a mortscript for turning the backlight off but i think we can implement it in some other way. pls guide...
there is an option in S2U2 that lets u do it, and u can deactivate all the other things so it wont interfere with ur normal usage (like locking itself, etc.)
crapula512 said:
there is an option in S2U2 that lets u do it, and u can deactivate all the other things so it wont interfere with ur normal usage (like locking itself, etc.)
Click to expand...
Click to collapse
Thanks crapula, i already scripted a mortscript to do this but i wanted some other way(inbuilt)... maybe like modifying the phone canvas so that it can turn off the screen like it is vibrating when the call gets connected... just in a similar way.