Is there a way to kill AS in order to save battery?
There are many threads with the same question, use the search and you will find some like this: http://forum.xda-developers.com/showthread.php?t=457793
Utilizem a porra da pesquisa.
I used the search and dude read that post. However when I did that there was no solution in that thread.
Eu usei a porra da pesquisa e não tinha nesse o post o que procurava!
Search for ASyncKiller
HTCzar said:
I used the search and dude read that post. However when I did that there was no solution in that thread.
Eu usei a porra da pesquisa e não tinha nesse o post o que procurava!
Click to expand...
Click to collapse
You dind´t search right.
Faz como eu e anda de página em página.
Ok thanks for the tip :=)
Sabes alterar as softkeys para o PI
ASyncKiller don't work, I use the fake server trick and it's ok now
http://forum.xda-developers.com/showthread.php?t=288352
ps: don't delete the fake server, if you delete it activesync will come back.
The fake server isn´t working for me with or without AS Killer, any other options?
i can confirm mikechannon's guide at post 2 works like a charm!
if you close manually activesync (obviously while not connected to the pc) it will not run again!
when you plug the device with the usb it will run as expected!
cheers
This AS is a Pain in the ASS, just can´t do it.
Are you talking of this post:
http://forum.xda-developers.com/showthread.php?t=288352&highlight=activesync
Call me mad, but I stopped it easily and accidentally. I stopped from the drop down menu top right corner, then connected to a pc as a disc drive.
Active sync aint popped up since.
.....and it's not switching on your device at midnight?
Beards
Not as far as I'm aware no. I used to see the same problem, a.s. in the drop down menu, always there even if I selected it off. After connecting to a computer as a disc drive it appears to have gone. I'll wait 'till midnight now to report back.
Hasn't been in the drop down menu for days.
mooro1973 said:
Not as far as I'm aware no. I used to see the same problem, a.s. in the drop down menu, always there even if I selected it off. After connecting to a computer as a disc drive it appears to have gone. I'll wait 'till midnight now to report back.
Hasn't been in the drop down menu for days.
Click to expand...
Click to collapse
Did you connect again in normal activesync mode?
Matterhorn said:
Did you connect again in normal activesync mode?
Click to expand...
Click to collapse
Since carrying out the Fake Server I have not sync'd the device using AS.
.... but the device still wakes up at midnight.
Beards
Matterhorn said:
Did you connect again in normal activesync mode?
Click to expand...
Click to collapse
It will sync normally if I select a.s. on connecting to a p.c.
Just looked in task manager - it;s there but the check box is grayed out.
Definately not showing in drop down menu, even with soft reset, and haven't seen it wake up the device at all -but now I will look for it at 00:00
Finally! I´ve done it, it off and it´s on when connected to the pc.
Many thanks to you all!
HTCzar said:
Finally! I´ve done it, it off and it´s on when connected to the pc.
Many thanks to you all!
Click to expand...
Click to collapse
Using my method?
What I do
I did the following with my HD, and it killed my Active Sync entirely, including midnight wake. Not sure if it will work for everyone, but did for me:
1. Install ASyncKiller to keep from having to manually close Active Sync down after you sync via USB;
2. Set up a fake server, uncheck all items to sync, hit finish, schedule for manual retrieve (as discussed in the links posted above) and KEEP the fake server.
3. In MemMaid or other task manager (there are free ones, I believe, if you search) open up the notification queue look for "repllog.exe". There should be three instances of it. Delete the one that says "AppRunAfterTimeChange."
Hope this works, and, yes, it is ridiculous that you have to go to such lengths for something so simple. This is why I love Windows Mobile
Related
Hi,
I just bought a Magician (Qtek s100) and the app Photocontacts seems to almost never work. The pics I assign almost never show up when someone calles me, even the default pics won't show.
Is there any way to fix this??
Funcemina bem no meu QTEK 9090. Tenho a impressao k isso nao deve tar mto bem instalado. Ja meteste a hipotese de fazer um hard reset?
Oi, epa ele vinha assim de origem com ele instalado e nunca funcinou muito bem...
Hi, well it came on the original ROM and It never wrked all that good since the begining
tiagoppc said:
Hi,
I just bought a Magician (Qtek s100) and the app Photocontacts seems to almost never work. The pics I assign almost never show up when someone calles me, even the default pics won't show.
Is there any way to fix this??
Click to expand...
Click to collapse
Don't know if this is the case, but it is crucial that the application is running in the background. If you close it things wont work... Just minimize.
to laaban
I also have the same problem, and your tip doesn't work, thanks thought.
Not sure if it worked
After some dig in, I just though from conclusion to try to change the ringtone of the phone to default after I had it changed before to fantasy, and then... photocontacts is working again. Let's see for how long. I will keep in touch.
I've tried it all, just minimizing, default ringtone and nothing.... I have rom 1.11 and SPB pcoket plus installed if that helps anything
Got this pain... solved finally
re installed caller_ID .. when there was an error about some file poped up.. go back to file explorer and rename that file.. then re install .. there will be like 4-5 of them.. soft reset.. :wink:
hard reset
You can always try to do a hard reset and install application by application always trying after each application if photo contacts is still working with another phone. This way you can check which is the program that is keeping photo contacts from running.
good morning everybody,
quite a newbie here. Please be patient.
I have noticed that my qtek 9000 does not disconnect automatically after a gprs connection. Per example after mail checking . It did it until somedays ago. I did not change anything in the applications installed.
Could somebody explain mewhy this can happen ? Is there a solution?
Many thanks for your kind replies
Tony
I need it, too
I know there are some third parts programs that cheks idle connections.
But i hope there's a registry hack 'cos i don't want a program in background that eats ram and/or CPU.
Is that possible?
:!:
I need this too !
Ok got it . The hack is GB - soft gprs & tweak
http://www.gb-soft.cz/xdaii/product_gprs_tweak_en.htm (for free download)
Settings (qtek 9000) to get immediate disconnection after mail connection are as follows...
Hope that a wise guy will bring things to normality on next rom release...
Cheers
I can't belive that there isn't another way to solve this problem.
I can't belive that there isn't another way to solve this problem.
Click to expand...
Click to collapse
...Me neither but........it seems so, unless a new rom will come to solve it.
Strange enough, but after a couple of hours under the new rom management, the disconnection worked...Then it stopped at once. Who knows why....
I went through HR and tried it again without ANY application...same problem.
At this stage I browsed around and grabbed this hack..
To be followed thus...
T
Strange enough, but after a couple of hours under the new rom management, the disconnection worked...Then it stopped at once. Who knows why....
Click to expand...
Click to collapse
It never worked in my (new) rom!
Maybe there is a program in extended rom that was not properly installed at the first boot.. And it start working from a reset..
I don't know.. :shock: :? [/quote]
Maybe there is a program in extended rom that was not properly installed at the first boot.. And it start working from a reset..
Click to expand...
Click to collapse
Installed my ROM twice in order to solve this issue..In vain.
By the way just give the hack a try... No memory swallow and excellent result. Worth the install ......
O No ??? (come si suol dire...)
[OT]
tony64 said:
(come si suol dire...)
Click to expand...
Click to collapse
SEI ITALIANO??!
.. :lol:
Ed io che mi sforzavo per tradurre (non che il mio italiano sia migliore :lol: ).
[/OT]
BTW ok: i'll try it.. But i hope in a better solution
Ciao!
install Resco Registry editor, then look in your registry for AlwaysOn string (there is a distinct entry for each connection setting you have created), then change from 1 to 0 or viceversa (if you want to be always connected: on packet data transmission you pay only for traffic, not for the time of connection, and your line is always free)
italos said:
then change from 1 to 0 or viceversa
Click to expand...
Click to collapse
It is set to zero...
Any news?
I need too gprs automatic disconnect. Any idea?
I set the idle timeout to 60 seconds. Don't remember how I did it (thought with a standard settings program), but looking for it I found the following thread:
http://forum.xda-developers.com/showthread.php?t=268397&highlight=gprs+timeout
I know theres a million posts about activesync but honestly i've never ran into an error i couldn't solve. Now i'm just stuck.
When i connect my device to USB nothing happens. Windows makes that device connected sound and thats it. Activesync doesn't budge. I've restarted my pc, soft reset my device. Repaired activesync, uninstalled and reinstalled it. Ran that ReSync program several times as well as Activesync Toggle. NOTHING
I changed the USB cable even plugged it into a different port. When i do that windows pops up with that little notification new hardware found. Does its little routine but still... activesync is dead.
What do i do all mighty ones?
------------------------------------------------------------------------------------
Just tried to connect with my laptop and same thing. My brother's wizard connects to my activesync.... Does this mean its time for a hard reset?
What's happen ?
Is Activesync wizard client launching when you connect usb cable ?
Is Activesync server (pc) launching when you connect usb cable ?
Have you removed any notification in notification queue on wizard , with memmaid (or sktools) ?
Is the process repllog.exe is launching when on wizard you connect usb cable ?
elrigolo said:
What's happen ?
Is Activesync wizard client launching when you connect usb cable ?
Click to expand...
Click to collapse
no its not popping up nut its running as shown by task manager.
elrigolo said:
Is Activesync server (pc) launching when you connect usb cable ?
Click to expand...
Click to collapse
no, stays dormant in the taskbar
elrigolo said:
Have you removed any notification in notification queue on wizard , with memmaid (or sktools) ?
Click to expand...
Click to collapse
no
elrigolo said:
Is the process repllog.exe is launching when on wizard you connect usb cable ?
Click to expand...
Click to collapse
its located in the notification que twice., first one doesn't have an argument, second one says AppRunAfterRndisFNDetected.
guess its not detectind Rndis... also when i use softic card export in usb mode, it does connect to the pc as a flash drive. but i removed it thinking it might be the culprit.
You need two repllog notification queue :
1- AppRunAfterRndisFnDetected (you have this one)
2- AppRunAtRs232Detect (you must recreate this one with memmaid or sktools for exemple)
thanks for that info, i just added the 2nd one, i'll try it out when i get home.
also one of the 2repllogs i've got has the argument /sched /remote /h thursday, august 03, 2006 - 8:01:40 should i remove this or leave it?
No you can leave it.
Some news ?
Same thing happened to me. I ended up having to uninstall ActiveSync on the PC, then go to Device Manager and remove the SmartPhone USB driver, reboot - and reinstall. Fixed the problem.
The time before that, I had to hard reset the Wizard when I trashed ActiveSync on the device itself.
elrigolo said:
Some news ?
Click to expand...
Click to collapse
worked like a charm, thank u so much, thought i was due for a hard reset but u were right on the money.
but when i first added the one i was missing i had to switch batteries, when i did that it was gone so i just re-added it and now its still in there.
haven't swapped batteries yet but done a couple of soft resets and its fine.
thanks again!
you're welcome
BTW guys - simular prob here... but I'm not going to hard reset... wondered if there where any simularities ?
http://forum.xda-developers.com/viewtopic.php?p=337673#337673
Terran
I recreated the second one but cannot find this option using memmaid.
1- AppRunAfterRndisFnDetected (you have this one)
to [email protected]
try this it will solve your pb.
Thanks to Big Purple Penguin.
Killer!! Thanks
rubbercow said:
uninstall ActiveSync on the PC, then go to Device Manager and remove the SmartPhone USB driver
Click to expand...
Click to collapse
Sorry to be an absolute dufus, but I can't see the driver in the Device Manager. My activesync just says "Retrieving settings" constantly.
Slave1 said:
rubbercow said:
uninstall ActiveSync on the PC, then go to Device Manager and remove the SmartPhone USB driver
Click to expand...
Click to collapse
Sorry to be an absolute dufus, but I can't see the driver in the Device Manager. My activesync just says "Retrieving settings" constantly.
Click to expand...
Click to collapse
I posted the solution for that problem in:
http://forum.xda-developers.com/viewtopic.php?t=56223
My 1st post gives a cab file, my second post in that topic gives a solution using regedit.
Thanks mate!
Slave1 said:
Thanks mate!
Click to expand...
Click to collapse
you're welcome
elrigolo said:
You need two repllog notification queue :
1- AppRunAfterRndisFnDetected (you have this one)
2- AppRunAtRs232Detect (you must recreate this one with memmaid or sktools for exemple)
Click to expand...
Click to collapse
I got stuck with ActiveSync to. Used MemMaid to change/add this... now it works again...
Thanks !! you saved my day... :lol:
Im learning my way into my new wizard, I have some questions:
How do I add data directly to my SD card from the PC? I dont have a miniSD reader or adapter. I want to add some MP3 and photos
ActiveSync only allows me to browse the phone internal memory.
Is there any tiny app that allows me to shut down the phone or restart it?
Thanks
prueba el wm5torage este va a convertir tu wizard en un lector de memorias sin k se active el active sync
enjoy it
Ciao Londere.
Thanks a TON!
Now I have a new question:
How can I map the Envelope button on my wizard, so when I press it, I can launch a new SMS message without going thru the menues to do this.
At this moment I have it mapped to the messaging app, but I want to go straight to send SMS as I just described.
Thanks!
one day saw a thread with this info search in the wizard forum bu remaping keys or something like that
found a solution here not sure if its the one you saw, but thanks for pointing me in the right direction!
Now I need to know how to map this shortcut to the envelope button, the settings>button app does not work for this.
Or I could use vijay555's suggestion and add an icon to the today screen with a link to it, but I dont know how to do it...
thanks again
so well i had never remap a kay well only the softkay with the tweaks . net but only the softkey
peu said:
Now I need to know how to map this shortcut to the envelope button, the settings>button app does not work for this.
Click to expand...
Click to collapse
Still looking for a solution to this Thanks!
hey guys...just looking for some help. its not a big problem but i just got my hands on my HD yesterday and everytime i check whats running in the backround...theres Active Sync.
i close it and check back 2 minutes later and there it is again!
i noticed this on my diamond after i update it with the latest WWE ROM but didn't take to much notice of it because i was giving it to the girlfriend.
is it meant to run in the backround??
i haven't even connected it to the laptop yet
cheers,
Phil
Same problem for me !
eire77 said:
hey guys...just looking for some help. its not a big problem but i just got my hands on my HD yesterday and everytime i check whats running in the backround...theres Active Sync.
i close it and check back 2 minutes later and there it is again!
i noticed this on my diamond after i update it with the latest WWE ROM but didn't take to much notice of it because i was giving it to the girlfriend.
is it meant to run in the backround??
i haven't even connected it to the laptop yet
cheers,
Phil
Click to expand...
Click to collapse
I tried this http://forum.xda-developers.com/showthread.php?t=423540 from the Diamond forum, but it doesn't seem to work.
cheers mate,
i'm gonna give that a go and i'll let you know how i get on
eire77 said:
hey guys...just looking for some help. its not a big problem but i just got my hands on my HD yesterday and everytime i check whats running in the backround...theres Active Sync.
i close it and check back 2 minutes later and there it is again!
i noticed this on my diamond after i update it with the latest WWE ROM but didn't take to much notice of it because i was giving it to the girlfriend.
is it meant to run in the backround??
i haven't even connected it to the laptop yet
cheers,
Phil
Click to expand...
Click to collapse
I have the same on my old device, Mitac Mio A701. This is probably normal for Windows mobile device. Check out this thread too. there are solutions for this...
the most simple and elegant solution:
just add activesync to exclusive list in the task manager...
1. when you'll check and get activesync on (uninvited)
2. go to task manager.
3. Click and hold on the word Activesync and then select from the pop-up "add to exclusive".
4. go to exclusive tab and thick activesync (repllog.exe).
done. worked for me many times (many ROMs)
i've tried this one (thanks to KukurikU) ...and so far so good.
i think its still running in the backround somewhere but i can't see it.
will try the other ones suggested...for a permanent fix later
cheers
eire77 said:
the most simple and elegant solution:
just add activesync to exclusive list in the task manager...
1. when you'll check and get activesync on (uninvited)
2. go to task manager.
3. Click and hold on the word Activesync and then select from the pop-up "add to exclusive".
4. go to exclusive tab and thick activesync (repllog.exe).
done. worked for me many times (many ROMs)
i've tried this one (thanks to KukurikU) ...and so far so good.
i think its still running in the backround somewhere but i can't see it.
will try the other ones suggested...for a permanent fix later
cheers
Click to expand...
Click to collapse
yes you are right, you only prevented the application UI from running, the processes that's related to activesync are still running. there are several of them, so you may only have killed 1 or 2.
i don't understand why you want to kill activesync permanently. how do you sync your contacts and calendars and all that? :S
buggybug0 said:
yes you are right, you only prevented the application UI from running, the processes that's related to activesync are still running. there are several of them, so you may only have killed 1 or 2.
i don't understand why you want to kill activesync permanently. how do you sync your contacts and calendars and all that? :S
Click to expand...
Click to collapse
i don't wanna kill it permanently...i just don't want it running in the backround and the fix that i applied works fine for me but i don't understand why its running??
Kill ActiveSync Process when idle
Please see this...which I believe is an elegant solution to ActiveSync continous running...
http://forum.xda-developers.com/showpost.php?p=2135727&postcount=1