Database Users

gprs automatic disconnection after mail checking

good morning everybody,
quite a newbie here. Please be patient.
I have noticed that my qtek 9000 does not disconnect automatically after a gprs connection. Per example after mail checking . It did it until somedays ago. I did not change anything in the applications installed.
Could somebody explain mewhy this can happen ? Is there a solution?
Many thanks for your kind replies
Tony

I need it, too
I know there are some third parts programs that cheks idle connections.
But i hope there's a registry hack 'cos i don't want a program in background that eats ram and/or CPU.
Is that possible?
:!:

I need this too !

Ok got it . The hack is GB - soft gprs & tweak
http://www.gb-soft.cz/xdaii/product_gprs_tweak_en.htm (for free download)
Settings (qtek 9000) to get immediate disconnection after mail connection are as follows...
Hope that a wise guy will bring things to normality on next rom release...
Cheers

I can't belive that there isn't another way to solve this problem.

I can't belive that there isn't another way to solve this problem.
Click to expand...
Click to collapse
...Me neither but........it seems so, unless a new rom will come to solve it.
Strange enough, but after a couple of hours under the new rom management, the disconnection worked...Then it stopped at once. Who knows why....
I went through HR and tried it again without ANY application...same problem.
At this stage I browsed around and grabbed this hack..
To be followed thus...
T

Strange enough, but after a couple of hours under the new rom management, the disconnection worked...Then it stopped at once. Who knows why....
Click to expand...
Click to collapse
It never worked in my (new) rom!
Maybe there is a program in extended rom that was not properly installed at the first boot.. And it start working from a reset..
I don't know.. :shock: :? [/quote]

Maybe there is a program in extended rom that was not properly installed at the first boot.. And it start working from a reset..
Click to expand...
Click to collapse
Installed my ROM twice in order to solve this issue..In vain.
By the way just give the hack a try... No memory swallow and excellent result. Worth the install ......
O No ??? (come si suol dire...)

[OT]
tony64 said:
(come si suol dire...)
Click to expand...
Click to collapse
SEI ITALIANO??!
.. :lol:
Ed io che mi sforzavo per tradurre (non che il mio italiano sia migliore :lol: ).
[/OT]
BTW ok: i'll try it.. But i hope in a better solution
Ciao!

install Resco Registry editor, then look in your registry for AlwaysOn string (there is a distinct entry for each connection setting you have created), then change from 1 to 0 or viceversa (if you want to be always connected: on packet data transmission you pay only for traffic, not for the time of connection, and your line is always free)

italos said:
then change from 1 to 0 or viceversa
Click to expand...
Click to collapse
It is set to zero...

Any news?

I need too gprs automatic disconnect. Any idea?

I set the idle timeout to 60 seconds. Don't remember how I did it (thought with a standard settings program), but looking for it I found the following thread:
http://forum.xda-developers.com/showthread.php?t=268397&highlight=gprs+timeout

My newbie questions

Im learning my way into my new wizard, I have some questions:
How do I add data directly to my SD card from the PC? I dont have a miniSD reader or adapter. I want to add some MP3 and photos
ActiveSync only allows me to browse the phone internal memory.
Is there any tiny app that allows me to shut down the phone or restart it?
Thanks

prueba el wm5torage este va a convertir tu wizard en un lector de memorias sin k se active el active sync
enjoy it

Ciao Londere.
Thanks a TON!

Now I have a new question:
How can I map the Envelope button on my wizard, so when I press it, I can launch a new SMS message without going thru the menues to do this.
At this moment I have it mapped to the messaging app, but I want to go straight to send SMS as I just described.
Thanks!

one day saw a thread with this info search in the wizard forum bu remaping keys or something like that

found a solution here not sure if its the one you saw, but thanks for pointing me in the right direction!

Now I need to know how to map this shortcut to the envelope button, the settings>button app does not work for this.
Or I could use vijay555's suggestion and add an icon to the today screen with a link to it, but I dont know how to do it...
thanks again

so well i had never remap a kay well only the softkay with the tweaks . net but only the softkey

peu said:
Now I need to know how to map this shortcut to the envelope button, the settings>button app does not work for this.
Click to expand...
Click to collapse
Still looking for a solution to this Thanks!

Alarm problem

Hello, everyone
I have a problem with my HD which I do not know if it was due to the installation of Spb Time. What happens is that I can not for the alarm to operate the phone only the Spb team. I carry the alarm default opens the window where it appears the three configurable alarms choose the time and then he appears not active in Manilla or rings. If Spb time is activate he plays in but does not appear as an asset in Manilla. what they think they can be?

Sorry I even donkey. I found the solution, I had not chosen the day of the week ....
Close please

_Fly_ said:
Sorry I even donkey. I found the solution, I had not chosen the day of the week ....
Close please
Click to expand...
Click to collapse
Nem comento, isso não parece teu.
No comments, it doesn´t look yours

How to kill ActiveSync?

Is there a way to kill AS in order to save battery?

There are many threads with the same question, use the search and you will find some like this: http://forum.xda-developers.com/showthread.php?t=457793
Utilizem a porra da pesquisa.

I used the search and dude read that post. However when I did that there was no solution in that thread.
Eu usei a porra da pesquisa e não tinha nesse o post o que procurava!

Search for ASyncKiller

HTCzar said:
I used the search and dude read that post. However when I did that there was no solution in that thread.
Eu usei a porra da pesquisa e não tinha nesse o post o que procurava!
Click to expand...
Click to collapse
You dind´t search right.
Faz como eu e anda de página em página.

Ok thanks for the tip :=)
Sabes alterar as softkeys para o PI

ASyncKiller don't work, I use the fake server trick and it's ok now
http://forum.xda-developers.com/showthread.php?t=288352
ps: don't delete the fake server, if you delete it activesync will come back.

The fake server isn´t working for me with or without AS Killer, any other options?

i can confirm mikechannon's guide at post 2 works like a charm!
if you close manually activesync (obviously while not connected to the pc) it will not run again!
when you plug the device with the usb it will run as expected!
cheers

This AS is a Pain in the ASS, just can´t do it.

Are you talking of this post:
http://forum.xda-developers.com/showthread.php?t=288352&highlight=activesync

Call me mad, but I stopped it easily and accidentally. I stopped from the drop down menu top right corner, then connected to a pc as a disc drive.
Active sync aint popped up since.

.....and it's not switching on your device at midnight?
Beards

Not as far as I'm aware no. I used to see the same problem, a.s. in the drop down menu, always there even if I selected it off. After connecting to a computer as a disc drive it appears to have gone. I'll wait 'till midnight now to report back.
Hasn't been in the drop down menu for days.

mooro1973 said:
Not as far as I'm aware no. I used to see the same problem, a.s. in the drop down menu, always there even if I selected it off. After connecting to a computer as a disc drive it appears to have gone. I'll wait 'till midnight now to report back.
Hasn't been in the drop down menu for days.
Click to expand...
Click to collapse
Did you connect again in normal activesync mode?

Matterhorn said:
Did you connect again in normal activesync mode?
Click to expand...
Click to collapse
Since carrying out the Fake Server I have not sync'd the device using AS.
.... but the device still wakes up at midnight.
Beards

Matterhorn said:
Did you connect again in normal activesync mode?
Click to expand...
Click to collapse
It will sync normally if I select a.s. on connecting to a p.c.
Just looked in task manager - it;s there but the check box is grayed out.
Definately not showing in drop down menu, even with soft reset, and haven't seen it wake up the device at all -but now I will look for it at 00:00

Finally! I´ve done it, it off and it´s on when connected to the pc.
Many thanks to you all!

HTCzar said:
Finally! I´ve done it, it off and it´s on when connected to the pc.
Many thanks to you all!
Click to expand...
Click to collapse
Using my method?

What I do
I did the following with my HD, and it killed my Active Sync entirely, including midnight wake. Not sure if it will work for everyone, but did for me:
1. Install ASyncKiller to keep from having to manually close Active Sync down after you sync via USB;
2. Set up a fake server, uncheck all items to sync, hit finish, schedule for manual retrieve (as discussed in the links posted above) and KEEP the fake server.
3. In MemMaid or other task manager (there are free ones, I believe, if you search) open up the notification queue look for "repllog.exe". There should be three instances of it. Delete the one that says "AppRunAfterTimeChange."
Hope this works, and, yes, it is ridiculous that you have to go to such lengths for something so simple. This is why I love Windows Mobile

[SKIN] iClicker for Salling Clicker [VGA SKIN!]

This is a work in progress, FOR VGA ONLY, as I have no way to test on any other device.
I've really didnt care for the interface of Salling Clicker, its truly a pain to use on my Touch Pro, and the buttons are tiny for the touch screen, resulting in having to use the dirrections keys to Play, Pause, Skip, not a problem, but finger friendly would be nice. I edited the bitmap resources in the EXE, thats why the file is an EXE, I don't know how to compile CAB files and the like, installation is easy. Copy the exe onto your storage card and drag into the Salling clicker folder in the program files folder. DONE! You may have to soft reset your device in order to successfully move, seems its protected if your using it, go figure. I was attempting to make it more finger friendly, and I did manage to make the buttons twice as big, which helped a little but the background on the navigation bar stopped working leaving me with a blue bottom, so I need to figure out why that is. Pictures are below, Id like to know if anyone knows how to enable finger scrolling as the program does not support it as of yet. Thanks for looking!
Update: I resized all the buttons so that they are now much easier to use on a vga device, or at least my Touch Pro, so the Diamond should work the same way, and anything with a VGA Resolution. There is still a bit of a problem with the back drop for the bottom bar, as well as transparency seems to have disappeared all together with the larger buttons, so it is in fact alot easier to use but, the bottom bar is a bit unsightly, so if anyone has any ideas of how to correct this let me know, I am putting up the new files for anyone to test. I plan to sharpen them later when I have time, as I have been busy at work lately its been hard to get around to it. Also it seems the "Menu Back Button stays on the front page, which Im not sure, I think I may have overwritten the dimmer one signifiying that it was unavailable, I will have to dump the resources again to make sure. Also the buttons seem a little smashed together, and being on a Mac doing all this isnt making the solutions to these problems all that easy lol. Thanks again for looking.

AT LAST! a vga skin for salling. i was getting cranky. thank you

nir36 said:
AT LAST! a vga skin for salling. i was getting cranky. thank you
Click to expand...
Click to collapse
Your very welcome!

um, i must be missing something, because the size of the buttons is EXACTLY the same. it is MUCH nicer and MUCH more beautiful.. but the size is the same...

nir36 said:
um, i must be missing something, because the size of the buttons is EXACTLY the same. it is MUCH nicer and MUCH more beautiful.. but the size is the same...
Click to expand...
Click to collapse
I'm still working on the button issues, I resized them, but the background would disappear when I did, so I havent quite figure it out as of yet. Sorry for the miscommunication. it does however seem that the bigger the button, the actual area that the bottom appears is larger as well, everything else moves up, so it auto resizes itself. As i dont know anything about programming it maybe the the background moves up as well.

hmm. well, i can try to open the exe in VS2k8 and see if i can manage something..
they promised a VGA version in the salling forum and it never came

nir36 said:
hmm. well, i can try to open the exe in VS2k8 and see if i can manage something..
they promised a VGA version in the salling forum and it never came
Click to expand...
Click to collapse
Yeah I'd been waiting for it as well, it seems they stopped development to a degree, maybe they just ran into the issue I ran into lol probably not though, but the navigation bar does resize itself so the coding has to be there, its just the background turns to an god awful blue lol. I'd be very great ful for your help, I posted it up to see if anyone would help me out with it. Thanks! I used Res Hacker on my Macbook Pro, Crossover thankfully ran it fine.

Sorry about the Personal BUMP
*bump*
Again I appologize for a personal bump, but I feel that someone could help out with this since Saling has dropped the ball on this as of yet.

MuchÍsimas gracias
¡¡no sabes lo que te agradezco el aporte!!
Muchas gracias lo estaba buscando desde hace mucho tiempo.
Javier

Si no hay problema, sigue buscando a alguien para ayudar a colorear con el fondo de la barra inferior, nadie ha respondido hasta el momento, no está seguro de por qué, tal vez nadie sabe acerca de este proyecto lil, pero su muy buena acogida.
Yeah no problem, still looking for someone to help with the background coloring of the bottom bar, no one has replied as of yet, not sure why, maybe no one knows about this lil project, but your very welcome.