i have a few problems with my wing: my touchscreen doesnt work and my wing makes no sounds...can someone help me?
Please be more specific with your description, it is easier for everyone to help. I have a similar issue as well and I posted it in a different section (Herald Mobile 6).
how much more discriptive can i be, the touch screen wont work and it isnt makin any sound!
which rom do you have, what have you done before touch screen doesnt work, can you switch your phone on and so on...
no rom and yea i can turn it on
Related
i have a mda vario 2 ( hermes) i've been installed a rom called hermes_wwe_3.62 Malina2d now phone boots up fine but the touch screen dose not work at all ! can anyone help ? .
To get pass the alignment screen i had to create a file on storage card " welcome.not" and that got me pass alignment screen.
now i am a newbie so please all the help would be appreciated i did have a look for file called touch.dll to replace it but could find one. ( as i read somewhere that might be the problem.
my ipl -1.04 & spl-2.10.01ipro
i really don't know what to do i have tried to re flash the rom no luck there.
all the hardware buttons work fine.
Not sure about that one. Why not post the question in the thread from where you got the rom? That name doesn't ring a bell.
If not try flashing the stock shipped rom, or the at&t stripped to see if the issue goes away. If it does go away, then don't use that rom.
cant really remember where i got the rom from as i the phone is my little sisters. do you have a link for the rom you suggested
My sig has the stripped rom, and the shipped at&t roms. You can also find some programs and my roms there too.
And to be safe make sure that hardspl is installed.
If that doesn't fix it, there might be a hardware issue.
cheers for your help. i am going to download one of your roms and pray that might resolve the issue . what the latest hardspl ? i thought 2.10 was the latest ? how do i tell what is the on i have installed on the phone ? Hardspl and spl are they the same thing ?
If you flash one of mine, flash the at&t rom first, that will straighten out any issues with the memory.
if you have 2.10olipro, your all set! spl (or hardspl) is the bootloader.
no luck still having issue with the touch screen wont wont work.
the touch screen used to work fine before. all this it just became very laggy so i decided to upgrade the rom , i went to thru a few roms.
any other idea ?
i must say i do love your rom everything is set out all nice and neatly shame the touch isn't working.
Thanks for the compliment on the rom!
Sounds like it has some kind of hardware issue. If your inclined to take it apart carefully (I haven't taken mine apart yet), you might be able to check all of the connections, and for dirt or anything that might be the issue.
I believe there are disassemble instructions on the wiki.
Maybe someone with more experience in taking the phone apart can chime in.
touchscreen issue
i m having the stupid touchscreen issue i have tried everything ( including disassembly and removing gasket but it still does not calibrate
starting to hate that phone
Sounds like Digitizer could be dead.... Need to replace the LCD and Digitizer if thats the case.
The trouble with this is there are a few different things that could be causing this and just replacing the LCD might not fix it.
Sounds like it could be though. If you are having trouble, DON'T do a hard reset until you have installed an app called "remote screen alignment", freeware off the net. It copies the alignment info to the PC so you can do a quick alignment using the PC instead of the buggered screen. Otherwise you'll be going in circles for ever without being able to get into the today screen.
Cheers...
actually i have hard reset the device
the trick is to put a file called welcome.not on memory card to skip first time alignment
i'll change screen and see if it fixes itself later
i ll use the phone as it is till then
new lcd
i changed the lcd it worked flawlessly for 3 weeks then bang! the bottom half of the lcd stop to work
i think that the ribbon on the lcd got damaged when i installed it on the hermes the fact that it needs to be turned 360 degrees during assembly cause the problem any thoughts from you guys????
I have an Imagio that i would like to give to a friend, they want Angry birds. And well.... The Imagio is Windows Mobile. So i was wondering if i can get android on there?
I've heard rumors that a blackstone ROM would work, But i've no idea how to go about installing it.. Any ideas?
I've tried a few times to put it on there but it doesn't work for me. I've been asking around as well.
Is not that easy, it is not the same hardware only same processor and ram, maybe FM radio and GPS is the same, but imagio must have a different GSM radio (because of the HSPA features) and also a CDMA/EvDO radio; the bluetooth is 2.1 instead of 2.0 and the hardware keys are different (only 4 on the blackstone)... The key is to develop a new Android rom for the imagio, is just a matter of drivers and configurations, i am pretty shure it's all there but has not been put together yet...
---
The ignorance is a deseased, but it can be cured
It booted (i guess) !!
coolpoete said:
I've tried a few times to put it on there but it doesn't work for me. I've been asking around as well.
Click to expand...
Click to collapse
Hi, i was ale to boot yesterday but i found a problem with the LCD screen, it is not recognized and is blank, i think maybe we can work it out using the correct command line arguments in the startup.txt HaRET file
Please try it, i need help:
http://www.4shared.com/file/h9LTDTdp...imagiotar.html
The screen is blank, but i know it boots because it turns off the screen after a minute and responds to the "send" buttom and turns on, also it created a data.img and FSCK0000.REC file
There's a lot of work to do but we are on the right way !!!
Thank's
Hey everyone, recently my hd2 touch screen stopped working, I'm not sure why it stopped responding but it will only respond by the physical buttons. The only thing I can do with it is turn it on and put it into sleep and or turn it on to the lock screen. I currently have android on it.
I searched around and found out that alot of people had the same problem as me and the only way to fix it is by sending it to HTC so they can replace the faulty screen. Now I'm going to try that but before I send it in I want to reset the phone back to original settings with WM 6.5 and remove the SPL. The problem is I am not sure how to do it, so can anyone let me know how I can do all that or point me in the right direction?
Appreciate the help
I had the exact same issue. I reset the phone multiple times and tried different roms from stock to modded, android to winMo 6.5 with no success. Your luck might be different, but the only way I was able to get my HD2's screen running properly was to have the digitizer replaced. I know it sucks, but at least you're not the 1st to deal with it.
Money2g said:
The problem is I am not sure how to do it, so can anyone let me know how I can do all that or point me in the right direction?
Click to expand...
Click to collapse
The right direction would be the search button. Just look for "Remove HSPL", "Uninstall HSPL" and you'll find plenty of results:
http://forum.xda-developers.com/showthread.php?t=611433
http://forum.xda-developers.com/showthread.php?t=623402
and you'll probably need this thread too:
http://forum.xda-developers.com/showthread.php?t=623283
One warning: please check whether you need a EU or TMOUS ROM before proceeding... Wrong ROM could brick your device, making things probably worse than they are...
Sincerely,
Mac
Awesome, another HD2 screen not working topic. We was seriously running low on these, Its not as if there wasn't enough or answer wasnt available already a million times over or we would have been in real trouble.
I have just installed WP7 and when it started the touch screen doesnt want to work at all. On everything it said it was installed successfully and i did every step in the guide -> http://forum.xda-developers.com/showthread.php?t=1356833.
Buttons works.. i can volume+ and - and i can also lock the phone but due to not working touch i cant work with it..
Anyone? Its not broken .. it was working great on the Android before the flash. Please i really need to know what to do.
Edit: I even tried installing v4 but still doesnt works.... :x
Im really sorry for triple posting but this is getting annoying. All day im trying other and other ways, flash back to WM6.5 .. TOUCH SCREEN WORKS ITS NOT GOD DAMN BROKEN ... I've send a PM to the developer of the ROM, guess what no answer.. i dont want to get back to WM6.5 .. I've used to flash 4 NAND androids (the best ones) each one of them in the main functions shows at least 2 bugs which are annoying like freezing display or my favorite - i cant hang up... i posted a thread in the Q&A Android forum about this, again no answer... I ONLY NEED TO KNOW WHAT TO DO to get my touch screen responding and working on my god damn WP7 so i can stop getting freezing stupid display and to be able to god damn hang up.. IS IT that hard!?!?!? Oh the best one is - i cant post to the main topic of the rom because according to the forum rules the newbies are idiots and they cant recognize any bugs in the rom so they can report it!... Jesus Christ give me a f***ing answer how to fix my touch screen driver or something or whatever i want my god damn phone working........
Hello I have the same problem, I went back to Windows Mobile 6.5 but the problem remains !!!!!! The touch does not work anymore!! How do you solve this problem??http://media.xda-developers.com/images/smilies/mad.gif
Hello you some news? I hope you do not have to buy the new touch screen!
For the original poster, I have no idea, sorry. For the second poster, it definitely sounds like your digitizer is broken. Have the same problem with my HD2. You can get them for cheap on Amazon, but replacing it takes some skill. Don't know where you live, but most repair shops will do it for around $50 here in the states.
Same here. i tried the YukiXda/Xboxmod Rom and after a reboot the touchscreen stops working. Will report to the devs. do not worry my friend
Hey darky, did you try installing the old HTC drivers on your WP7? Not sure if you did, or if that particular rom uses the newer drivers, but that could potentially help out. I found the old drivers in the Xboxmod cab update thread. Don't know if the rom you're using supports cabs or not, I've only used xboxmod & yukis rom. Search that thread, would post a link but using my phone at work.
---------- Post added at 08:38 AM ---------- Previous post was at 08:35 AM ----------
Nitro_123 said:
Same here. i tried the YukiXda/Xboxmod Rom and after a reboot the touchscreen stops working. Will report to the devs. do not worry my friend
Click to expand...
Click to collapse
Same as you, over here. As soon as I updated to SP1 & rebooted, no more touchscreen! But mine wouldn't work in any OS, including WM6.5. So I think my digitizer just had bad timing for me, but who knows could be rom related.
Thank you all for taking time to answer!
@lorispari No i couldn't get it fixed at all, your problem sounds different than mine because my touchscreen works with other OS without problem.
@JonnieLasVegas I haven't tried, i only tried different radio version and reinstall of the HSPL... though i dont know how much that could help me because im still new with the smartphones... as far as i see this HTC HD2 is really great but has a lot of factory bugs in hardware and software side (if i could say it that way). Even with stock WM 6.5 it had a lot problems. Anyway when i saw the thread with all the known bugs that WP7 has... i just clicked the HTC Leo: HD2 category and switched back to Android ICS which was another mistake because i forgot its still buggy as hell so im flashing atm to Gingerbread however in few months im selling this phone and getting HD7, hope till then there will be a category for him (or it may have.. i havent checked)
Thanks again for the answers! Appreciate it!
My screen was unresponsive twice. Turns out digitiser was broken. So had to flash to stock rom and send to htc for repair
If you need a fix, pm me, found one
Hey guys,
a friend has a HTC HD2 what has some strange issues.
If you start the phone, everything is fine, you can work with it like it should be.
But after you switch of the display and reactivate it after some time it seems that the digitizer is no more working.
It's just luck if you try it several times and it work again. Most of the time it doesnt.
At first for me it seems to be a software issue.. he was still on Stock ROM WM 6.5 and nothing changes anyway.
So I did all steps to unlock the phone and installed ICS 4.0.4 release. Still same issues here... :-/
After that I gave WP 7 a try, there it seems to be a bit better but still the same trouble.
After turning on the display again the digitizer is no more working. But directly after a reboot it works still fine even with multitouch.
Does anyone had ever heard a a HD2 like this? Is the digitizer just broken or can I repair it in any way? I mean it works great if you don't switch the display off
May you find something useful here http://forum.xda-developers.com/showthread.php?t=1774566