Hi there.
First of all I'am new in this community and with that I would like to congratulate everybody that have done such a good job, I apologize my English but linguist is not my best.
So, i bought a Qtek S200/Prophet recently and it doesn't start, it stays in the boot that says the IPL, SPL, GSM and OS version for 15 to 30 minutes sometimes even an hour. I've tried the original ROM's and only one time and after almost 1 hour, it started. i did the startup configuration but since i haven't my sim card inserted i had to reboot, when i started again it didn't.
Can anybody tell me whats going on??Thanks
Cumps CyreX
Problem solved. Thanks for nothing
CyreX said:
Problem solved. Thanks for nothing
Click to expand...
Click to collapse
Then let us know, what you done. In a forum you can make a question, or you can give an answer.
NEO130 said:
Then let us know, what you done. In a forum you can make a question, or you can give an answer.
Click to expand...
Click to collapse
True in that..
Well i just installed a Portuguese ROM and it worked..the other time i was installing ENG ROM..
Cumps CyreX
CyreX said:
True in that..
Well i just installed a Portuguese ROM and it worked..the other time i was installing ENG ROM..
Cumps CyreX
Click to expand...
Click to collapse
But warning, if you flashed a portuguese Rom, you must speak portuguese. Thanks bro
NEO130 said:
But warning, if you flashed a portuguese Rom, you must speak portuguese. Thanks bro
Click to expand...
Click to collapse
LLOLL..
I do speak Portuguese..I'm Portuguese..
Cumps
Related
Hi
what is problem , i can get only on bootloader mode my herald and nothing more.
i get phone on dead situation , so i'm trying to fllash but i can get nothing from this?
can anyone explain what's going on?
best.r
haveri said:
Hi
what is problem , i can get only on bootloader mode my herald and nothing more.
i get phone on dead situation , so i'm trying to fllash but i can get nothing from this?
can anyone explain what's going on?
best.r
Click to expand...
Click to collapse
When nothing works except bootloader - try to flash an original Rom with RUU.
look in the wiki.
And try.
papamopps said:
When nothing works except bootloader - try to flash an original Rom with RUU.
look in the wiki.
And try.
Click to expand...
Click to collapse
Yes yes before writte here on forum i have try much think about herald
Fllash has going just on 2% and then stoping.
how can i solve this problem?
best.r
haveri said:
Yes yes before writte here on forum i have try much think about herald
Fllash has going just on 2% and then stoping.
how can i solve this problem?
best.r
Click to expand...
Click to collapse
Which language does your Herald has - and what do you want to flash. You have to choose teh original RUU.
Does it give the "Vendor-ID error"??
papamopps said:
Which language does your Herald has - and what do you want to flash. You have to choose teh original RUU.
Does it give the "Vendor-ID error"??
Click to expand...
Click to collapse
Yes , give this "Vendor-ID error" (294)
I'm trying to flash with :RUU_Herald_HTC_WWE_1.8.405.1_02.71.90_Ship , this {RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Ship nothing , i dont know what language herald have before?
haveri said:
Yes , give this "Vendor-ID error" (294)
I'm trying to flash with :RUU_Herald_HTC_WWE_1.8.405.1_02.71.90_Ship , this {RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Ship nothing , i dont know what language herald have before?
Click to expand...
Click to collapse
Last chance. Try to flash ANY rom. Posted in the WIKI.
Good luck. When you don´t find one without given Vendor-ID error. You have to wait for the official HTC update.
You can add me to messenger if you use:
papamopps said:
Last chance. Try to flash ANY rom. Posted in the WIKI.
Good luck. When you don´t find one without given Vendor-ID error. You have to wait for the official HTC update.
You can add me to messenger if you use:
OK i'm trying all this flash that bee here
http://wiki.xda-developers.com/index.php?pagename=Herald_Upgrades
OK i have add your mail
Click to expand...
Click to collapse
My unit is working fine..can make receieve calls etc...
Am running on Meschle's 2.11 lite....hard reset fine everything fine...
When I try to upgrade to the full version - Gives me error...Connection.check cradle etc...
Tried Official ROM - same problem
Tried Manual Bootloader - goes into a white screen and hangs...then after 4-5 minutes i see the colored screen with IPL 3.04.0001 and SPL 1.11.000...
if I reset goes back to the ROM that was there on it...works fine...
Did I just brick my phone?
Not that I am not happy with it...but then why the Bootloader and flashing is not working?
Try the official dopod version from here.
NOTE: it will change ipl, spl and gsm radio versions.
After that run uspl again before tryin any other rom
NikMel said:
Try the official dopod version from here.
NOTE: it will change ipl, spl and gsm radio versions.
After that run uspl again before tryin any other rom
Click to expand...
Click to collapse
Thanks a million...it worked re-flashing the official version now !
phew !
I think it's high time - i gave my orbit a rest rest from all the ROMming..
hehe
nice
devdarshan said:
Thanks a million...it worked re-flashing the official version now !
phew !
I think it's high time - i gave my orbit a rest rest from all the ROMming..
Click to expand...
Click to collapse
NikMel said:
nice
Click to expand...
Click to collapse
Hi Nikmei, do you need to tun uspl first before flash the official dopod rom, thanks
This method is only for an extreme case like when you can’t boot!
Do not use this method for update w/out the uspl.
tongphan said:
Hi Nikmei, do you need to tun uspl first before flash the official dopod rom, thanks
Click to expand...
Click to collapse
NikMel said:
This method is only for an extreme case like when you can’t boot!
Do not use this method for update w/out the uspl.
Click to expand...
Click to collapse
thanks , when i try to run upsl it got to 70% the the screen turn off and a pengune picture, what should i do now, thanks
If you really want to flash your pda then you better hard reset it then uspl will work for 100%.
Normally if you run uspl you should get a blank screen and after that you can goon with the update wizard.
tongphan said:
thanks , when i try to run upsl it got to 70% the the screen turn off and a pengune picture, what should i do now, thanks
Click to expand...
Click to collapse
NikMel said:
If you really want to flash your pda then you better hard reset it then uspl will work for 100%.
Normally if you run uspl you should get a blank screen and after that you can goon with the update wizard.
Click to expand...
Click to collapse
NikMel, i have the dopod m700, try to run the upsl few times before flash to wm6 rom, every time it went to 70% the screen went off, please help
I can't tell you for sure if this procedure will work for your pda.
this works on artemis or p3300 or dopod p800
tongphan said:
NikMel, i have the dopod m700, try to run the upsl few times before flash to wm6 rom, every time it went to 70% the screen went off, please help
Click to expand...
Click to collapse
NikMel,
you just saved me alot of money.
I just ordered a new mobile device yesterday because I thought I had bricked my device.
Fortunately I found this post and was able to reflash the device with this rom. So I have cancelled the order.
Thank you so much!!!
I would love to donate to you if you have paypal
If you would then send it to this forum.
Sorry but I dont know how you can do it.
Arura said:
NikMel,
you just saved me alot of money.
I just ordered a new mobile device yesterday because I thought I had bricked my device.
Fortunately I found this post and was able to reflash the device with this rom. So I have cancelled the order.
Thank you so much!!!
I would love to donate to you if you have paypal
Click to expand...
Click to collapse
NikMel said:
If you would then send it to this forum.
Sorry but I dont know how you can do it.
Click to expand...
Click to collapse
Found donate! link in the bar.
hehe OK
Arura said:
Found donate! link in the bar.
Click to expand...
Click to collapse
NikMel said:
hehe OK
Click to expand...
Click to collapse
I meant navigation bar!
I have a friend who is atm in the east.
Now i'm wondering if he brings me one if I can get it in my own language (dutch) and how should I do it? I couldn't find an answer on this question and hopefully someone here can tell me!
Thank you!
golles said:
I have a friend who is atm in the east.
Now i'm wondering if he brings me one if I can get it in my own language (dutch) and how should I do it? I couldn't find an answer on this question and hopefully someone here can tell me!
Thank you!
Click to expand...
Click to collapse
Hello Golles, There are dutch rom's available wich you can flash on the Polaris if the device is Hard-SPL. It's possible to flash the rom in any language.
You can flash your phone with every rom here...
And every rom means you can chose from several languages....
golles said:
how should I do it?
Click to expand...
Click to collapse
There are lots of guides... Try to search....
Re: Bad Flash brick Pharos!
Hi,
Sorry for my Bad English
I bricked my Pharos!
I Have a problem!
I Made my Own Pharos rom with "jose_sonseca" Totorial!
The Tutorial is bad, now start my HTC Pharos only in the "smart mobility" screen.
No Rom ( My own createt rom ) not Loaded!
how i can enter the bootloader and reflash the bad rom?
The rom gang up in the "smart mobility" screen!
No Active Sync...
Edit: SPL: 1.11Mobiz!
The phone is only one day old... ;(
Please Help...
Thx
How i can enter the Bootloader mode?
How i can reflash my Pharos?!
Please help..
Lou
O.k!
The Answear is " Soft reset and Camera!"!
I Reflash it now!
did it work the second time?
avathar behemoth said:
did it work the second time?
Click to expand...
Click to collapse
If not, upload your part02.raw, and I will try to compile it.
avathar behemoth said:
did it work the second time?
Click to expand...
Click to collapse
Works great now...
jose_sonseca said:
If not, upload your part02.raw, and I will try to compile it.
Click to expand...
Click to collapse
Can you please Upload a German Rom with original Bootsplash?
Many Thx
LouTheDuke said:
Can you please Upload a German Rom with original Bootsplash?
Click to expand...
Click to collapse
I don't have it, but it's posted here -> http://forum.xda-developers.com/showthread.php?t=420216
For the original bootsplash, I don't think that german rom have it, so apply my original bootsplash, I've posted it here -> http://forum.xda-developers.com/showthread.php?t=412324
Hi,
How can i add Portuguese language to
Mango Without NoDo Backup.
Thanks
I did it. My omnia is now in portuguese.
Sent from my GT-I9000 using Tapatalk
Hi!
Could you please post a Tutorial how to do it? Do you have portuguese br or pt?
I jut got my Omnia 7 with Mango 7.5 8107 version and would like to put Portuguese.
Thanks!
I am sorry. I only see your answer now. if you still need help let me know.
Anth1980 said:
I am sorry. I only see your answer now. if you still need help let me know.
Click to expand...
Click to collapse
Hey Anth1908, thanks for your kindly attention but i could done that already!
Ok. When we know how to do the right steps its very easy. I think i will try the dft freedom rom.
Anth1980 said:
Ok. When we know how to do the right steps its very easy. I think i will try the dft freedom rom.
Click to expand...
Click to collapse
Yeah, became simple! DFT Room its great, using it for 3 days now, simple better and nothing to worry, nice job they´ve done.
Does it have the portuguese language? Does the bluetooth works to share files in dft?
Yeas,we have brazilian portuguese! Unfortunatly, didnt find my galaxy s over bluetooth...