Database Users

bluetooth car handsfree disconnect issue

ok.. I read a couple of threads regarding this issue but could not find any solutions. one guy said that ak3.3 fixed his problems but 3 have a spv m3100 and I don,t know wich update pack should I choose besides cingular wich doesn't have video calling.
Any thoughts?

Doesn't anybody have the same issue and managed to solve it?

I had the same issue when I upgraded to WM6, I fixed it by installing the GPS radio ROM. This fixed it straight away.

In installed the latest 1.35 ROM and that did not fixed it and even with XDA live that did not work. Where can I find the GPS Rom?

andrei318ti said:
Doesn't anybody have the same issue and managed to solve it?
Click to expand...
Click to collapse
My 8525 was disconnecting from my car constantly after getting the phone a few days ago. My TyTN never had this problem. Even after installing the exact same ROM onto the 8525 that was on my TyTN I still had the same problem.
Basically, after a minute or two of being connected to my car the bluetooth on the phone would turn off. It didn't just disconnect. It turned off completely. This phone did it just like the Treo 750v (very unreliable phone by-the-way) did.
The problem appears to have gone away now that I have installed WM6 on my 8525. I have not done anything special to get it working aside from installing the LSVW WM6 ROM. It is definitely worthwhile to give it a try.

I believe that 1.35 is the "GPS enabled, but not initialized" rom.

OJ2000 said:
I had the same issue when I upgraded to WM6, I fixed it by installing the GPS radio ROM. This fixed it straight away.
Click to expand...
Click to collapse
I had it fixed by changing the registry values for bluetooth power saving. Upgrading to VM6 and to radio rom 1.35 (gps enabled) bringed back the problem... now I cannot find anymore what registry value I had changed...

stepir said:
I had it fixed by changing the registry values for bluetooth power saving. Upgrading to VM6 and to radio rom 1.35 (gps enabled) bringed back the problem... now I cannot find anymore what registry value I had changed...
Click to expand...
Click to collapse
Ohhh....please try to find them because I searched high and low and still no solution.

Try this:
http://forum.xda-developers.com/showthread.php?t=245887&highlight=bluetooth+power+saving

Ok I tryed the small fix on that link and did not work at all. I also inslled WM6 LSVW and still nothing. Any other ideas?

Try this: "jetware.hands-free.extension.1.24".

Installing the leaked Cingular ROM fixed the problem for me. Prior to this, it would connect briefly, then disconnect, and would come and go, but mostly would not connect. Now, every once in a while, it disconnects very briefly, but for the most part is solid.

Tryed jetware but still no go. Any other idea? doesn't anyone that has a hermes use a car handsfree bluetooth system? From what I know all devices suffer from this?

Nothing? Hasn't anybody found the solution to this problem? From what I read it happens to almost all hermes devices.

Yes, had the same problem.
Have a SPV M3100 with the Audi A4 Bluetooth (part of Gen II GSM Prep).
My old MDA Vario worked flawlessly.
SPV3100:
1. Pairs and makes / receives calls.
2. After 10-15 Mins calls are not routed through car kit.
3. When making / recieving call after 10-15 Mins, handset thinks its connected to handsfree (headset symbol in phone dial pad) but car does not pickup call hence no handsfree and no sound in handset ear piece!
4. Occasionaly, handset reconnects to car handsfree automatically on an incoming call.
5. Connection of in car charger SEEMS to improve realiablility.
6. Switching Bluetooth off then on on the handset will initiate a new connection that again works for 10-15 Mins.
Mark

temoore said:
Installing the leaked Cingular ROM fixed the problem for me. Prior to this, it would connect briefly, then disconnect, and would come and go, but mostly would not connect. Now, every once in a while, it disconnects very briefly, but for the most part is solid.
Click to expand...
Click to collapse
I get the problem with the new rom also, have been using it for weeks now. The new ROM does NOT resolve the issue, at least with the Acura HFL system.

So it seems that there is currently no fix to this issue.

bsica said:
I get the problem with the new rom also, have been using it for weeks now. The new ROM does NOT resolve the issue, at least with the Acura HFL system.
Click to expand...
Click to collapse
Well, it did resolve it on my '07 Audi Q7.

I tried to contact HTC and this is what I got
Thank you for your enquiry. An IMEI check of your device indicated that it is a network branded phone.
IMEI:? 357719003647231? Network: Orange Romania SA
Unfortunately we do not offer technical support for network branded handsets, as both software and hardware can be altered by the network provider.
Please contact your provider for any support that you might need, including repairs and software updates.
Click to expand...
Click to collapse
Can anyone with a TyTN contact HTC and ask for a solution?

Thanks temoore,
Looks like I need to get my boss to upgrade my car from A4 to Q7 to get the phone hands free to work.
It just might work.......;-)

Problem connect HTC Touch 3G with Passat 2008 Bluetooth

Hi,
I have a HTC Touch 3G:
The phone is recognised (the name), it seems to pair ok (had to put in a 16-digit PIN), but then the car (Passat 2008) kit cannot connect to the phone for some reason.
Is there any solution for this subject?
Regards,
SpiderXman

I believe, you have to turn on the rSAP-Profile in the BT section of your Jade.
The VW vehicles have a BT-Unit, that only works with mobiles, that have the rSAP (remote SIM Access-Profile) enabled.
You know, how to enable it ?
Start-->Settings--> Bluetooth --> SIM Access
Hope this helps.
Greetings from Cologne,
Arniebirdy

Thanks for your help,
However I have done this procedure without success.
SpiderXman

Emanuel Ferreira said:
Hi,
I have a HTC Touch 3G:
The phone is recognised (the name), it seems to pair ok (had to put in a 16-digit PIN), but then the car (Passat 2008) kit cannot connect to the phone for some reason.
Is there any solution for this subject?
Regards,
SpiderXman
Click to expand...
Click to collapse
Hi/ I have the same problem with BMW X5 2004. paring is OK, but it dosn't work. it looks like connect and then disconnect (on phone screen headset icon appear and disappear). SIM access anable but no sucses
With touch 3452 it was not a problem. HTC support team told me that it is a conflict with BT kit on BMW. Now I see not only.... What to do???????

For most of the things discused here no one has paid.
For the things people have paided for go to the garage, i know i would!

Tom Lenferink said:
For most of the things discused here no one has paid.
For the things people have paided for go to the garage, i know i would!
Click to expand...
Click to collapse
You know you can, but how to resolve this issue ???? I think any payment can't, can it?

Hi,
using Jade's BT SAP with BMW 3 series (E91).
Works like a charm, except one issue: names in BMW phonebook appear sorted by first name.
In Jade its sorted - as it should be - by last names.
No solution found until now.
Anybody an idea?
Thanks
@ConsultantR
Try this for older BT Kits: http://www.jetwaremobile.com/

ConsultantR said:
Hi/ I have the same problem with BMW X5 2004. paring is OK, but it dosn't work. it looks like connect and then disconnect (on phone screen headset icon appear and disappear). SIM access anable but no sucses
With touch 3452 it was not a problem. HTC support team told me that it is a conflict with BT kit on BMW. Now I see not only.... What to do???????
Click to expand...
Click to collapse
Hi there,
I have a similar problem with my Volvo S40 2009. My Jade and the car connects each other but every 15-30 seconds the connection cuts off. It is very annoying while talking to someone, just in the middle of the conversation the radio starts to run again, since Jade loses connection to the car.
Is this some kind of configuration or setup issue? Any help?

I had this on / off problem too.
It was a fault in the phonebook contacts (some signs are obviouly not allowed in this bluetooth stuff (e.g. / or ")
So i moved all contacts to a folder, that wasn´t synchronised and that worked fine. Afterwards i added this removed contacts back step by step and was able to identify the problematic ones.
The easy way instead is to set up the phonebook to SIM only and copy the most used contacts to the SIM
Regards Quirlsen

Quirlsen said:
I had this on / off problem too.
It was a fault in the phonebook contacts (some signs are obviouly not allowed in this bluetooth stuff (e.g. / or ")
So i moved all contacts to a folder, that wasn´t synchronised and that worked fine. Afterwards i added this removed contacts back step by step and was able to identify the problematic ones.
The easy way instead is to set up the phonebook to SIM only and copy the most used contacts to the SIM
Regards Quirlsen
Click to expand...
Click to collapse
Thanks for the hint Quirlsen. Is it only the Name and Surname lines, which I have to correct? Otherwise it would be impossible, since I also have the Windows Live(Msn Messenger) contacts in the Contact List.
By the way is there a way to remove those Msn Messenger Contacts from the phonebook? They just popped up after I logged in once to Windows Live.

To be honest, i don´t know.
I´ve exported my whole contact list to csv, cleand it up with Control+H and imported it back (i had to add all picvtures afterwards
Your Win Live prob you could solve by defining different phonebooks for sync with phone and other stuff.

Touch HD and Parrot Bluetooth

Hi All,
For just over a year now, I used my TyTN 2 with my Parrot CK3100 bluetooth carkit with no worries.
Last week I got my Touch HD (woah - what an upgrade), and cannot get it to pair with the parrot.
On the parrot and TyTN 2 I would select a windows CE device on the parrot and hit it. 60 seconds later all was good to go.
With the Touch HD, I cannot get it to pair. The Touch HD picks up the parrot, I select it, and it begins to pair. At that moment, the Parrot says "Pairing failed" and that is that. I can reboot, fiddle, try other devices on the Parrot etc... and nada. Just won't work.
Any ideas people?
TIA

Hey
I have it paired with my parrot so if defo works, one thing to try is updating the parrot as I did this about 3 months to get it working with my n95 8gb.
Sully

Thx man. I actually thought that just after I posted. I last updated the Parrot about a year ago. I hope it works. I struggled today having to pick-up the damned phone to speak to people

where can you update your parrott?

Go here: http://www.parrot.com/uk/support/downloads
Download the update tool and whichever PDF relative to how you will do it.
Use the tool to download the latest firmware.
I use my notebook and bluetooth connection to connect to the parrot and do the update. Is very simple, and quick.

Okay, updated the CK3100 to latest firmware. No change. My Touch HD is listed in the paired devices list, but pairing fails everytime when trying to connect.
I am not using the stock ROM on the Touch HD though. I am running Dutty's 2.1 Extreme ROM. Think this could be the problem? Debating re-loading the stock ROM to see if it makes a difference.

Dominion,
Sorry I cannot help, but I am very interested in any future input, since I was about to order a Parrot ck3100 TODAY
This coincidence may save me from ordering the wrong kit. I hope you can sort out yours.
Thanks

I absolutely have to get this working. I have become dependant on the CK3100, so will persevere. As soon as I have a working result I will post my findings and solution.
I am busy re-loading the stock WWE ROM on my Touch HD right now, then will try again. If that won't work (gut says it will though), then I have to dig into the dark hidden spaces of Google Failure not an option here. I have to find a way to get it to work.

Okay people... Feedback... All sorted!! YAY.
Touch HD Rom: RUU_BlackStone_HKCSL_WWE_1.19.831.0_Radio_52.49a.25.26_1.09.25.14_Ship.exe
Can find it on the wiki.
CK3100 Firware version 4.18b (latest as of today).
I would suspect my problem was Dutty's ROM as the CK3100 would indicate "Failed" as soon as a connect was made, then the Touch HD which just hang there. I would have to hard reboot. This happened on my year old CK3100 firmware and the latest.
With the WWE Stock ROM I just re-loaded, the CK3100 said "Failed" as the connection was made, but the Touch HD progressed to prompt me for the "1234" code. I entered it, and the two paired 100%. Took 30 seconds from start to finish.
So go out and get your CK3100 SwissRV

Dominion said:
Okay people... Feedback... All sorted!! YAY.
Touch HD Rom: RUU_BlackStone_HKCSL_WWE_1.19.831.0_Radio_52.49a.25.26_1.09.25.14_Ship.exe
Can find it on the wiki.
CK3100 Firware version 4.18b (latest as of today).
I would suspect my problem was Dutty's ROM as the CK3100 would indicate "Failed" as soon as a connect was made, then the Touch HD which just hang there. I would have to hard reboot. This happened on my year old CK3100 firmware and the latest.
With the WWE Stock ROM I just re-loaded, the CK3100 said "Failed" as the connection was made, but the Touch HD progressed to prompt me for the "1234" code. I entered it, and the two paired 100%. Took 30 seconds from start to finish.
So go out and get your CK3100 SwissRV
Click to expand...
Click to collapse
Ah, but what if you want a CK3100 and like Duttys V2.1 Xtreme??

That is my dilemma. I have always used Dutty's ROM's on each of my HTC phones.
It is sad to not be able to use it, but I would rather have hands free in my car than a custom ROM - as awesome as it is.
Hopefully Dutty can fix it, then we can have the best of both worlds
With Dutty's ROM, my Garmin Mobile XT would fix so damn quick. It was unbelievable how fast it was ready to navigate. With the stock ROM, I am back to waiting, waiting, waiting... Need to find a radio upgrade to go with the stock ROM.

Thanks Dominion, I just ordered after reading that the "normal" ROM works.

My stock Telstra T8285 ROM would not work with my Parrot car kit. It got as far as entering the code (1234) during pairing, however it fails to pair after that.
So, I flashed Dutty's latest ROM, and I still have exactly the same problem this morning.
I am going to try the Parrot firmware next.. I will let you all know if it works.

Hi,
I have the parrot 9100 and it works like a charm with dutty 3.9. This should be the same for the 3100.
Instead of connecting the phone via the car kit you can try to connect it via the phone. Go to advanced bluetooth settings and add a bluetooth device. This worked for me. Parrot rules
Do I have to mention that the car kit has to be visible then ;-)

My HD works fine with my Parrot CK-3100. I´ve stock spanish 1.14 rom. No problem. Update parrot firmware and must work it..
F

Quality problems with HD and CK3100
I have a Touch HD (Orange unlocked) ROM 1.09.25.14. I have reported sound quality problem to Parrot UK who recommended latest f/w (4.19) which I installed. I still have poor audio quality on most calls (unintelligable sometimes), but OK on handset if call transferred back to it. I tried a Sony Ericsson phone which worked fine on CK3100. It appears to be an HD bluetooth issue. Anyone got an ideas?

pastyman said:
I have a Touch HD (Orange unlocked) ROM 1.09.25.14. I have reported sound quality problem to Parrot UK who recommended latest f/w (4.19) which I installed. I still have poor audio quality on most calls (unintelligable sometimes), but OK on handset if call transferred back to it. I tried a Sony Ericsson phone which worked fine on CK3100. It appears to be an HD bluetooth issue. Anyone got an ideas?
Click to expand...
Click to collapse
I have exactly the same problem with my blackstone, with italian stock rom. Tried with a nokia and everything ok.
does someone have an idea? something I can try to test with advanced configuratiobn tool on bluetoth config?

Connecting to Audi's MMI

I picked up my Audi A4 last week, and the MMI + telephone connection high works to a limited degree with the Touch HD.
It correctly identifies the Orange network, 3G, varying signal strengths, and can dial out and receive calls, but I don't have access to other functions such as the phone's last dialled calls, missed calls, phonebook/contacts list (biggest problem!), etc.
I'm using the original 1.14.405.3 (22273) WWE rom which came with the HD, but has anyone had any success with the MMI by using other roms?

Guess this does not help, but I had the same problem with a brand new mercedes C200 and Dutty's 2.8 firmware...
Cheers
[update]
maybe this thread helps a little: http://forum.xda-developers.com/archive/index.php/t-456900.html
some say it worked after upgrading to 1.19...
personally I think bluetooth has always been ****ty

Pretty interesting that a version of Duttys made it stop working, at least it shows bluetooth compatibility is affected by different roms. Thanks for the link, it seems the JetWare program might work too, but updating the rom is a last resort for me since I've never done it before. I'll try JetWare first, and if it stops working after a few days, I'll go for the rom update. Thanks again!

You'r welcome! I am on Duttys 3.0 right now but never had a car again with bluetooth so couldn't test
If you never flushed your HD - try! You will be massively excited I swear
Compared to the original firmware the phone was unusable slow and had a ugly user interface... I can really suggest Duttys 3.0! Once you are through the process of flashing it's quiet easy...
Cheers

Heh, maybe I'll go for the regular handset option for my next car, seems like it'd be less of a headache. Anyway I upgraded my HD to 1.19 and there was no change in displaying phonebook contacts, so I decided to flash Dutty's v3.3 and it still doesn't work properly...but I'm liking Dutty's a lot, definitely glad I upgraded to it. Thanks for suggesting it!
I'm back to square one again though, so if anyone else has some advice/experience with getting it to work, I'm all ears

Anyone at all?

Is the Audi new or used? If it is used you might have an older version of the MMI software. Good luck getting Audi to do the upgrade for you. Check out the forums at Audiworld.com.
I have an A6 and have the same problems.
Have you tried Jetware? I used that for awhile but I found I would rather use a headset now.

I use a Touch Pro with my 09 A4 and I have the same problem. Everything works great except when it comes to syncing the phone book. After pairing the phone with the car, a message pops up asking if I'd allow the car to access my contact. I'd answer yes, but then nothing happens.
For some unknown reason, I was able to upload the phonebook once. I don't know what I did differently that time but the phonebook mysteriously showed up in the car memory. However, the next time I started the car the phonebook was gone.

Hi everyone. My HD works fine on my 2006 Audi A8L. After initial pairing with the MMI (default pairing code is "1234") you have to wait a little while and the phone book and recent calls pop up. In the Phone > Setup of the MMI I selected only to use phone memory.
One issue I have is that the 150 contacts I have are somehow displayed in 2 iterations of the alphabet, each showing only a half the contact list.
Also good to know. Pairing with Audi's MMI is only possible the first 5 minutes after you turned the power to the car on, ie. turning the key one notch, or starting the engine, so be sure to have your Touch HDs bluetooth on already.

Audi's Bluetooth phone features are on a phone by phone basis, Audi have a list of all the handsets that they have tested and the features that are available using that phone and the firmware for the phone that it needs to produce those results.
I work for Audi so if there's any questions I'll do my best to answer. (I work in parts)

Bluetooth BMW and HTC HD2

Hi
I have a BMW X5 and a HTC HD2 with the newest ROM. When I enter the car, HD2 is recognised automatically by the car and I can place phonecalls dialing from my HD2. The only thing that does not work is that BMW tries to upload my phonebook from the phone but it does not get it. BMW says "please wait" - forever.
Before I flashed the ROM, this worked. Anyone has any ideas? I would even pay for someone in Zurich who comes and fixes this. One thing I could do of course is to downgrade my ROM again. But before I do this, I want to explore any other options.
Thanks a lot!
PS: jetwaremobile.com definately does NOT work on HD2

I have exactly the same issue. The HTC HD2 works ok for calls etc but the phone book upload is "please wait" forever. Very annoying. I have the standard up to date ROM and BMW X5 2009 model. Any help would be great.
Thanks
mrickenbach said:
Hi
I have a BMW X5 and a HTC HD2 with the newest ROM. When I enter the car, HD2 is recognised automatically by the car and I can place phonecalls dialing from my HD2. The only thing that does not work is that BMW tries to upload my phonebook from the phone but it does not get it. BMW says "please wait" - forever.
Before I flashed the ROM, this worked. Anyone has any ideas? I would even pay for someone in Zurich who comes and fixes this. One thing I could do of course is to downgrade my ROM again. But before I do this, I want to explore any other options.
Thanks a lot!
PS: jetwaremobile.com definately does NOT work on HD2
Click to expand...
Click to collapse

So any ideas? Now we are already two you can make happy! Thanks

Hey..
I don't have a BMW neither a bluetooth radio BUT i somewhere read in this forum, that there is a fix, to let the hd2 be recognized as normal phone
I know I'm not that much help , but I hope u can find the thread here good luck =)

HD2_Noob said:
Hey..
I don't have a BMW neither a bluetooth radio BUT i somewhere read in this forum, that there is a fix, to let the hd2 be recognized as normal phone
I know I'm not that much help , but I hope u can find the thread here good luck =)
Click to expand...
Click to collapse
I have a 2008 BMW, and I did experience this the first time..I sat there waiting for a few mins adn then got bored...but after I had turned the car off, been away and come back..it transferred straightaway.
Funnily enough, when I had my iphone (yes..sorry) I had the little image of the phone next to the BT signal on the display. I don't get this straight away with the HD2, but it always eventually appears..and then stays there until I hard reset my phone and do a ROM upgrade and then start the pairing again..where I just get the BT signal...then randomly..a few weeks later, the phone image appears again....very odd

Works fine here with a BMW 5x from 2008.. Using miris 6.5.x ROM

Funnily enough, when I had my iphone (yes..sorry) I had the little image of the phone next to the BT signal on the display. I don't get this straight away with the HD2, but it always eventually appears..and then stays there until I hard reset my phone and do a ROM upgrade and then start the pairing again..where I just get the BT signal...then randomly..a few weeks later, the phone image appears again....very odd
Click to expand...
Click to collapse
Hi, I also have a 2008 BMW (E93) and I do see the phone logo. It also syncs about 250 of my >3000 contacts. With my TyTN2 I used "Jetware Mobile" to sync just one dedicated category. But that doesn't work anymore with MinMo 6.5

schrej said:
Hi, I also have a 2008 BMW (E93) and I do see the phone logo. It also syncs about 250 of my >3000 contacts. With my TyTN2 I used "Jetware Mobile" to sync just one dedicated category. But that doesn't work anymore with MinMo 6.5
Click to expand...
Click to collapse
oh yes it does!
in fact, this is the only thing that works in Jetware with WM 6.5 - nothing else works in my case
i have a 2005 X5

bmw
i have a 2006 bmw X5 and the phone book works perfect so does everything else very happy )

zipolly said:
i have a 2006 bmw X5 and the phone book works perfect so does everything else very happy )
Click to expand...
Click to collapse
Which ROM do you use 1.66? or earlier? With my earlier ROM I had no problems, but since I upgraded to 1.66 (German), the phonebook does not transfer...

Bluetooth auto control problem
I can’t control my bluetooth (on/off) when using Inesoft phone profiles/controls; I have also tried other programs but no success(in another program the window of bluetooth was disabled); through all programs, I could control phone, WIFI, and gprs but not the Bluetooth. The only way to turn the Bluetooth on/ off is the Comm Manager (Manually); could anyone help please. Thanks

2006 bmw
I use the latest 1.66 wwe rom off t he htc website with no problems at all .

zipolly said:
I use the latest 1.66 wwe rom off t he htc website with no problems at all .
Click to expand...
Click to collapse
thank you, I am glad it worked for you...you must have a newer generation ULF than me then.
Is your phone HD2? mine is Toshiba TG01..I have managed to make it work 50/50 of the times, but I do not know WHAT CHANGES are between it working and not working...it is very frustating to know (and experience it working) that it can/should work, but not being able to

I have a new HTC Mini HD and have the same problems with my 2009 BMW 3. BT Headset function works just fine, but iDrive keeps trying to sync the telephone book, unsuccesfull. Instead, my phone's battery gets drained. Anyone any sollutions?

Unfortunately I don't have an answer for your question, but it sounds like it might have something to do with the bluetooth stack used for that ROM/Radio not being recognized by the car. Perhaps the layer that deals with data transfer is removed. Sorry I can't be of more help here.
What I can do to help is to offer a warning. I am a former BMW Client Advisor, and have been told many, many times by service technicians that using phones which are not specifically approved by BMW can affect your car's ECU (brain) and if it needs to be repaired or replaced, it will not be covered under warranty. That could be just nonsense to force you into buying only phones which BMW has tested (or vendors have paid for a marketing fee), or it might be spot on, in which case you run a pretty big risk.
Hope this helps.

OK, problem solved. BMW updated my carsoftware to its newest version last week and now my HD2 works perfectly with my car (again). I can make calls AND my phonebook is synced as well.
Hint1: Try if your phonebook sync problem exists with the SIM contacts as well as with the phone contacts
Hint 2: worldwideweb.bmw.com/com/de/owners/navigation/bluetooth/compatibility_check_intro.html

a_petrov303 said:
oh yes it does!
in fact, this is the only thing that works in Jetware with WM 6.5 - nothing else works in my case
i have a 2005 X5
Click to expand...
Click to collapse
zipolly said:
i have a 2006 bmw X5 and the phone book works perfect so does everything else very happy )
Click to expand...
Click to collapse
Hi All,
I have a BMW X5 2005 model. I can pair the phone OK but it constantly disconnects and reconnects once the transfer of the phonebook occurs. The phonebook transfers always start from scratch when this happens and nothing gets loaded to the car's phonebook.
If a call comes in, or if I make a call while it is connected (like within 5 seconds) the phone stays connected for the duration of the call.
I have tried all the Regisrty tweaks and none change the behaviour.
I also read it is because the HD2 uses Widcomm BT stack and not the MS BT Stack.
Zippolly and a_petrov303 and all those that have it working, can you please tell me which Rom you are using? I am using the latest Energy's 6.5.x rom. i noticed someone mentioned Miri's 6.5.x Rom works.
Thanks,
Rob

I have a 07 E60. The HD2 pairs fine, synchs contacts fine, but the sound quality is so bad it's not useable. Of course bmw says it's not a compatible phone, but I think there is a problem with the car as my Diamond won't find it, even though it is supposed to be supported

its mainly due to the car bluetooth, BMW etc don't make the car kit mostly siemens do and they are slow on the uptake of doing updates.

anybody found a snap-in for the hd2 yet?
I have a 7-series F01 and it is really annoying to have to deal with that usb cable...
Ontopic
I had the BT problem too, deleting the profile and repairing the phone did the trick for me...