How to turn off 3G and GPRS ?
Disabled all data connection but weather tab still retrieve data.
look for modaco - nodata
Try that too but not working.
weather tab -> menu -> settings -> disable the automatic download
or
start -> settings -> connections tab -> connections -> delete the data connections
Related
Guyz,
my exec shows 'Connected' to my wireless access point (KasuDEN) but when i'm trying to access any internet page in exec it's trying to connect to 'O2 Active' which i don't want to do....
how do i make use of my broadband wireless connection in my exec pls ?
Kindly throw some light .....
Thanks in advance
Go to Start -> Settings -> Connections -> Connections -> Advanced -> Select Networks -> and change "Programs that automaticaly connect to the Internet should connect using:" to "My Work Network"
mikeycrawford said:
Go to Start -> Settings -> Connections -> Connections -> Advanced -> Select Networks -> and change "Programs that automaticaly connect to the Internet should connect using:" to "My Work Network"
Click to expand...
Click to collapse
Thanks mate...it worked...
mikeycrawford said:
Go to Start -> Settings -> Connections -> Connections -> Advanced -> Select Networks -> and change "Programs that automaticaly connect to the Internet should connect using:" to "My Work Network"
Click to expand...
Click to collapse
HI, I have the same problem. I made the same changes and still does not work.
My current config I can use terminal services to connect to my other machines, but when I open internet explorer it says connection was lost and to re connect.
Is this a bug or is there another setting I need to make.
I set both to " My work Network "
Thanks in advance..
Hello! I have a problem with WLAN. I couldn't find where to set up my proxy and port settings for WLAN. If I go to the start > settings > conections I can't set up a wireless network, just 3g, bluetooth etc. (but there are settings for proxy), but if I go to start > settings > network cards and then tap Add new there are just options that i need exept those two. Help me please!
Ok. Now for everybody who keeps getting crazy charges for their phone for data charges when all they really use is MMS, this short guide is your friend. This assumes you have a CDMA phone (idk about GSM right now) and Arcsoft MMS. This was tested on an Alltel ROM and seems to work great. I am not responsible for any additional charges that you may receive but I did work as hard as possible to create a carrier foolproof solution. If you do not care about MMS, skip steps 7-10.
Here goes:
1. Install a DCD Carrier cab. It doesn't matter which one. This will allow you to change your Connection settings if you have a carrier like Verizon or Alltel that prevents you from doing so.
2. Soft reset in so the cab will take effect.
3. Go to Start -> Settings -> Connections -> Connections -> Advanced -> Select Networks
4. Change the first drop-down box to 'My Work Network' or another blank connection.
5. Press OK twice and soft reset.
6. Go back to Start -> Settings -> Connections -> Connections -> Advanced -> Select Networks and verify that your connection settings have indeed changed.
7. Go to Start -> Programs -> Messaging -> SMS/MMS -> Menu -> MMS Options -> Servers
8. Edit the MMSC server you would like to send and receive MMSs on.
9. Go down to 'Connect via:' and select your carrier's connection settings.
10. You're done!!! Enjoy your MMS enabled, no data, less money on your bill phone!!!!
Thanks alot but the best solution is using this program
http://forum.xda-developers.com/showthread.php?t=251819
Sorry i am really a newbie,but how do i update the weather by using Wifi??because it is always automatically connected to GPRS for the update and there is data charge.....help is appreciated...
My Jade uses, if available, WiFi. Did you set up your WiFi with encryption key etc properly on your Jade? Should use this, if activated...
faizalhacker said:
Sorry i am really a newbie,but how do i update the weather by using Wifi??because it is always automatically connected to GPRS for the update and there is data charge.....help is appreciated...
Click to expand...
Click to collapse
Hai Faiz
Connect with ActivSync. That will do the trick.
You could use nodata to block gprs, just see your other thread about GoogleMaps.
And make sure your connections are set up properly....
start -> settings -> connections (tab) -> connections -> advanced (tab) -> select networks -> both options should be set to 'my work network'.
Go back to connections tab -> advanced network -> disable HSDPA
go to text service tab(or sms tab) -> text message through GSM
Now you've disabled all GPRS data traffic, set up your wifi connection and you should be good to go.
Mine doesn't seem to like wifi networks. It connects to them ok but then email and opera won't work.
If I connect via my service provider using 3G everything works fine.
I don't mind this as my contract includes 500mb of data per month and I don't use it online that much as I still find it easier using a PC if I'm at home or in the office.
I also find that if I have unique switched on to search for wifi networks it kills the battery life so I don't have it enabled.
I'm sure you will be able to get it to work, I just haven't botherd due to the reasons above.
Can anybody tell me that from where can we add the GPRS settings link IP, port etc ?
THanks
go to start -> Settings -> Connections -> Connections -> Add a new connection.
ramersonw said:
go to start -> Settings -> Connections -> Connections -> Add a new connection.
Click to expand...
Click to collapse
Thanks dude...