Hello! I have a problem with WLAN. I couldn't find where to set up my proxy and port settings for WLAN. If I go to the start > settings > conections I can't set up a wireless network, just 3g, bluetooth etc. (but there are settings for proxy), but if I go to start > settings > network cards and then tap Add new there are just options that i need exept those two. Help me please!
Related
Guyz,
my exec shows 'Connected' to my wireless access point (KasuDEN) but when i'm trying to access any internet page in exec it's trying to connect to 'O2 Active' which i don't want to do....
how do i make use of my broadband wireless connection in my exec pls ?
Kindly throw some light .....
Thanks in advance
Go to Start -> Settings -> Connections -> Connections -> Advanced -> Select Networks -> and change "Programs that automaticaly connect to the Internet should connect using:" to "My Work Network"
mikeycrawford said:
Go to Start -> Settings -> Connections -> Connections -> Advanced -> Select Networks -> and change "Programs that automaticaly connect to the Internet should connect using:" to "My Work Network"
Click to expand...
Click to collapse
Thanks mate...it worked...
mikeycrawford said:
Go to Start -> Settings -> Connections -> Connections -> Advanced -> Select Networks -> and change "Programs that automaticaly connect to the Internet should connect using:" to "My Work Network"
Click to expand...
Click to collapse
HI, I have the same problem. I made the same changes and still does not work.
My current config I can use terminal services to connect to my other machines, but when I open internet explorer it says connection was lost and to re connect.
Is this a bug or is there another setting I need to make.
I set both to " My work Network "
Thanks in advance..
OK.
When I'm at home, I use my Wifi AP to connect to the Internet and my home network. I have to set my settings to:
Settings --> Connections --> Connections --> Adcanced --> Select Networks --> My Work Network.
When I'm on the move and my HTC TyTn is connected to KPN UMTS I hve to manually set my settings to:
Settings --> Connections --> Connections --> Adcanced --> Select Networks --> KPN GPRS / UMTS.
Is there any chance that this can be set to any kind of automatic mode, a scripting tool on my todayscreen or other solution???
I am not familiar with an automatic way to switch networks, but here is what I do on my Jamin:
My GPRS settings are under My ISP (just tap 'add new connection in the main connections tab, note My ISP has to be selected for use in 'advanced' for this option to be available)
When I connect to my home WiFi (or any other WiFi) I select 'this network connects: to the internet'.
In advance->network selection both lists are on My ISP.
This way I never have to switch between networks and all apps (except push mail that insists on GPRS) use WiFi if available and GPRS if not.
Thx
Wow, thanks!!
4 months of trying, mindbreaking hours. While the solution is so simple!
IT WORKS!
levenum said:
I am not familiar with an automatic way to switch networks, but here is what I do on my Jamin:
My GPRS settings are under My ISP (just tap 'add new connection in the main connections tab, note My ISP has to be selected for use in 'advanced' for this option to be available)
When I connect to my home WiFi (or any other WiFi) I select 'this network connects: to the internet'.
In advance->network selection both lists are on My ISP.
This way I never have to switch between networks and all apps (except push mail that insists on GPRS) use WiFi if available and GPRS if not.
Click to expand...
Click to collapse
I need to do what the opening post dictates also, but I dont quite have a grasp on the above.
Can anyone make it any clearer? Sorry
Hello! I have a problem with WLAN. I couldn't find where to set up my proxy and port settings for WLAN. If I go to the start > settings > conections I can't set up a wireless network, just 3g, bluetooth etc. (but there are settings for proxy), but if I go to start > settings > network cards and then tap Add new there are just options that i need exept those two. Help me please!
P.S. I have WM5 and Qtek 9000 (HTC Unversal)
OK, after about 10 minute trying, I finally get it done.
When you select one AP name in Wi-Fi setting,it will ask which profile will the connection connects to.( I use Chinese version, I guess it will be "Default Internet" and "Default Company" ).The two connection is the two you select in setting->connection->connection->advance tab, the upper is "Internet" the lower is "Company", and you can make a new profile here using the "New" button,here you will find proxy setting and enter some proxy , because you are just using this profile in wi-fi ,so the "moderm" can be left blank.
When you have done the setting, you can turn on Wi-Fi, browse some web site, in taskMgr(additional application I installed) you will find the ppc has establish a tcp connection to the proxy server you set up.
Hey! uhm... Does anybody know how to restrict X1's internet connection [3g ( "UN"solved! ) GPRS (solved ) UMTS\HSDPA (solved ) etc..] except Wifi ? Our provider has a bit too high fees for data transfers... I'm quite newbie to WM at all! IF YOU DO CAN YOU GIVE ME A GUIDE?
THANK YOU FOR YOUR REPLY!
P.S. I searched
Go to settings > connections > connections > advanced > select networks. There you change the "programs that automatically connect to the internet" to "My Work Network". That will disable any automatic internet dialing.
Neni zač
NoData
I am using a WM6.1 and I cant connect on the wireless connection in my university. The reason for that is inorder to connect on that university network, I need to make the WM to autodetect the proxy settings. Or atleast manually write them.
Excuse my lack of information on the matter, but inorder to log on the network using my laptop for example, I had to check the autodetect proxy settings in my browser, and then it asked me for a password and a user name every time I try to surf the net. How to do that using my PPC?
go inte settings > connections tab > connections then under my work network press the set up my proxy server link and from there you should be able to enter all the details you need similarly to your uni's settings.
ikeaaxel said:
go inte settings > connections tab > connections then under my work network press the set up my proxy server link and from there you should be able to enter all the details you need similarly to your uni's settings.
Click to expand...
Click to collapse
thanks dude,
fixed, just had to untick the proxy settings