Database Users

P3300 not restarting after upgrade

Hello Team,
My P3300 is stopped on start screen (IPL, SPL, GSM, OS...) with HTC picture and is not starting anymore...
I tried the WM6 upgrade and i don't know how to restart it from my old ROm or the new one.
Please Help
Many Thanks

Many of Us have been in your spot here is a good start for you, but the answer is read read read, many topics like yours and alot of people have grown tired of the same posts daily, just trying to keep you from getting the wrath of the few that sit and wait for such a thread to start
http://forum.xda-developers.com/showthread.php?t=311650
and good luck, post with your questions and I will do what I can to help, but it boils down to
Use the original rom/USPL/New Rom
http://forum.xda-developers.com/showthread.php?t=311479 Read this entire thread if you have the patients, I wish I would have saved the links for a future reference, but these two links will get you going where you need to go

Hi Morpheus022
I'm having the same problem.
I will let you know when I have something.
If you have a solution first let me know also.

did you gave the device a hard reset?
may it's stuck in the loader and if you give the device a hard reset he will start up normaly

pvdhelm said:
did you gave the device a hard reset?
may it's stuck in the loader and if you give the device a hard reset he will start up normaly
Click to expand...
Click to collapse
I did it but nothing change. Nothing is running

Windows Mobile 6.1 Lock in to Beta Massage

Hello Everyone,
I'm new to all this, I bought my HTC Touch ELF0100 HTC P3452 and after a week of use it start showing the Beta test release software massage, I been reading over the forums without any success on how to solve this issue, I can't use my new phone now, please any help would be appreciate it, I forget to mention that I bought it on Ebay and it came from china, I been trying to contact the vendor with no response from his part. Again, please help me or point me to the right direction on my search for a solution of this issue.
Thanks
Esojrod
ELF0100
HTC 3452

It might be an unoriginal HTC device.
Take out your battery and check around whether you see a HTC logo, or some other words.

Windows Mobile 6.1 Lock in to Beta Massage
Thanks for replying,
If I take the battery out I can see the HTC logo on the lower right corner of the battery housing.
This maybe relevant or not, but I noticed that when I connect the device to my laptop and try to sync it, a massage pop out saying that the " device is a prototype and remember to change the vendor ID".
Is there any way I can reinstall windows mobile on it. At this time I do not have any information on the device.
Thanks for your help.
Esojrod
ELF0100
HTC 3452

Hello, follow my simple guide.
Sorry for the late reply, was settling some of my chemistry and physics work.
http://forum.xda-developers.com/showthread.php?t=525815
(Read the 7th and 8th post)
Than post everything you see there to here.
Feel free to ask me any questions.
PM if urgent.

Wait, if that dont work, go to the elf upgrading forum and Hard SPL your device.

Hello,
Thanks for all the valuable information and posting you send me, unfortunately I'm not able to sync my elf with activesync and I cant either hard reset or neither of the buttons seems to be working beside the one to control the volume, when I press the power button and this one the phone display a " Enter bootloader / updated from SD Card? " message on the screen.
Something that I can do with this little brick now?
Thanks for your help.
Esojrod
ELF0100
HTC 3452

wait, im lost.
so what did you do to your device?

Hi
Did you by your device new or seond hand as this message may be displayed after flashing the unbricker test rom
so if it is second hand this device maybe was bricked and you will need to CID unlock and flash a new rom or search for an official rom for it

I buy it on ebay and supposedly was new, when I receive it it work fine but I noticed that the date was wrong and corrected it after that all I can see is the Beta test message when it load windows mobile 6.1.
Any help you guys can provide would be greatly appreciated.
Thanks for your help.
Esojrod
ELF0100
HTC 3452

Make sure you leave negative feedback, so others do not get duped! if you cannot hard reset like normal Touch instructions, it is a Clone Elf or Elfin.. FAKE! Let others know!
the beta thing does not really mean its a fake, just could be installed incorrectly the OS, but if you caanot Hard Reset, that is a sign of a fake..... REPORT, NEG HIM!

Thanks guys,
I just found out that this is a fake ELF, I hard reset it following this link , now it it out of the Beta message, but if I try to correct the date again goes back to the same screen with it.
I know that you guys do not support fake ELF, but can I flash the rom on it to a new one, or does anybody know how to get rid of the message and use to current date and time?.
Thanks for your help.
Esojrod
ELF0100
Fake HTC 3452

Usually flashing a genuine HTC rom will brick a unoriginal phone.
You may want to try and there is a thread on it.
http://forum.xda-developers.com/showthread.php?t=529206
See how it goes.
NOT ADVISABLE.

ELF JTAG In Need

Hi to all Masters,
I am in need to flash my elf via JTAG but am not able to find anyways after googling so finally i decides to ask for help hear.
I need JTAG pin outs image , Its s/w & process to work on its spl hope i can get this hear aa waiting for masters to help me out..........

JTAG?
Why do you need to flash in this manner?

Yes Good Question bro.....
Have got one P3450 & some one tryed to change its language & loaded P3452 rom on it & not its stuck in tri colour/ Boot mode any ways i found its DID & CID using snoopy & mtty but this DID:-ELF010050 & CID:- VODAP102 is not avaible so the ways i know to give this cell life is in 2 options
1:- Great Olipor can do this i know very welll as he has did same one for me in past but he charges very high to creat fixer for such sets....................& this time its not so affordable soooooooo
2:- I planed to give some time on this work & try with its JTAG if it can be possible.....
If any one knows ways pleas co-operate...
Thanks to all In advance how keeps affords to build thisup......

You mentioned CID locked and such?
I thought there was a free CID unlock tool in the ELF Upgrading forums.
And yes, even if you are stuck at that 3 colour boot screen, you can still plug in the usb cable and unbrick your device from there.

jeremy89632 said:
You mentioned CID locked and such?
I thought there was a free CID unlock tool in the ELF Upgrading forums.
And yes, even if you are stuck at that 3 colour boot screen, you can still plug in the usb cable and unbrick your device from there.[/QUOTE]
How ? to unbrick withought its proper rom can u pleas healp out on it ? Have added u on my yahoo if possible pleas let me know. Waiting...........
Click to expand...
Click to collapse

alright, you can reach me by email.
because my laptop is with acer service centre.
Do you have a memory card?

Yes bro i have Memory Card........... & mailing u in few seconds
& i like your sologon
" Knowledge is power, sharing is powerful "
Share as much as you can in your life, as you may not know how many lives you will impact.
Start sharing today, because you wont know how long you can share if you don't start.

Thanks for the compliments
Glad to help.

So what process ill i need to do & yeha i ill like to know your Good Name if u dont mind

Finall no s/w stuff is working to solve this issue i need JTAG can any one help me.........................................................................

Hey, how is it going?
I sent you a few links last time, so did it work out, or .. ?
Have you flashed your phones to other ROMS before?
Or you are using the default ROM.

Thanks bro for those links but its none of my use i tryed alll but no results now am sure i need its JTAG or some one who can flash my spl in boot mode.........

let me offer you a solution.
You told me that you have a memory card right?
Great.
Follow this.
http://wiki.xda-developers.com/index.php?pagename=Elf_SD_Card_Flashing
Cheers.
I always used to flash onyx rom using this method and its working great.
I think you can use this to flash spl / ipl or anything else. (with nbh files)
Drop me an email if you bump into any problems.

Finally My cell Got Life Back i did it naturally it costed me a lots of time & patients incluading actavitation of QMAT but i did it & am happy that i did it on mine........... Any ways thanks to alll who supported.
Butttttt still i ill like to have ways for JTAG if any one can provide........

So wait, did your phone worked in the end?

Yes its done man & thanks to u tooooooooooo

Great to hear that.
If you have any more issues, hit us back again

please help total thicko

please help im wishing to upgrade my offical rom from 1.43 to 1.48 but says my phone is not suitable??????im totally thick coming from nokia to windows,i did use search but was unable to find the answer.
thanks phil

Hello and welcome on board,
Can you post up the exact error message you are getting please?
Also read this thread...http://forum.xda-developers.com/showthread.php?t=609477 which you will fond useful and come back with any questions.
Incidentally you are not a fool for asking as long as you have searched first.
WB

hi mate thanks for the reply,when i go to the htc offical rom download,i'm asked to enter my serial number,which i do but says my device is not suitable and won't let me proceed any further??
cheers phil

got a major problem now ive tried to update to 1.48 but it crashed now i get a warning traingle on start up,and can go into bootloader screen and it says upgrade rom code error please try again???someone please help.i hope i havent bricked my phone

Is your HD2 branded? (bought it in combination with a contract?)

hi mate its on vodafone contract buts its not branded.

Hi again,
Have you tried to hard reset your phone to see if the old rom boots up again?
If it does not then you might want to reflash your existing rom onto your phone using the SD card method (look at the threads at the top of the Rom Development page to find what you are looking for).
If it works and you are still keen to upgrade the rom you need to read the threads on using either the Goldcard or HardSPL methods to upgrade.
Come back and let us know how you got on.
WB

hi mate i was having the exact same probs as the chap in the hd2 bricked thread,same messages etc and stopping at 9% i took there advice and reflashed the hpsl again which has worked a treat,i'm now a little dubious bout trying to upgrade as i don't fancy bricking it.
ive emailed htc to see why i cant upgrade from 1.43 to 1.48 seems odd it says my phone isnt suitable.
p.s thanks for the help mate much appreciated

OK, wait until you hear back from them. However if you are now up and running and have installed HardSPL, I think you will find that flashing a new radio on its own might help solve your problems.
I think if you look at the thread you were referring to (this one...http://forum.xda-developers.com/showthread.php?t=618084), IIRC, MysticGenius runs through a procedure for doing this that helped him sort out a similar problem.
Good luck with it.
WB
PS: Lesson learned here though is to read exhaustively on the topics on here BEFORE jumping in as fixing problems later can be both time consuming, if you are lucky, and a pain in the rear. As for that horrible sick feeling you get when you think you have bricked £500 worth of phone....wouldn't recommend it to my worst enemy!
WB

Yet another Telus S510 Bricked - Help needed

Hi guys
Really like the forum
Ok
So i've been asked to unlock a this phone as a favor
So got home after having some drinks(not the best idea) and tried unlocking it
Long story short i installed a wrong spl as i understand and now the phone stays on the splash screen
I did lots of research in the forum, allot of ppl have the same problem, but didnt find a complete answer on how to fix this
as i now understand i should first application unlock it, then hard spl and then flash custom rom
On the Bootloader it says
"cEDA100
SPL-0-39.0000
MicroP-Cedar.W(LED) v58B"
And on the bottom "Serial" witch as i now understand means its not application unlocked?
So when i try to flash it it allways stays on 0%
And as i said it stops on the htc splash screen
Tried hard resetting the first way, but nothing. Cant find the original telus rom and i dont have an htc donor to do the 3rd hard reset way
Any help would be much appreciated right now guys ASAP cause am leaving canada by 2mrw
Thanks for reading
Hope u can help

Moved to general as not rom development

Anyone?
C'mon guys xD
Give me something
^^