hi again
When I open wireless lan settings the check box for on is not shown.
How to I fix this? Can it be fixed in the registry?
So my wirless lan option is alway off and I have no way to turn it on.
albedairy said:
hi again
When I open wireless lan settings the check box for on is not shown.
How to I fix this? Can it be fixed in the registry?
So my wirless lan option is alway off and I have no way to turn it on.
Click to expand...
Click to collapse
What handset are you using? If it's a Nike then it's because you can't get WiFi on it.
do you have a wifi card in?
my device is Imate JasJam
Is the problem recent or old ??? have you upgraded the ROM or it is the original one.......Did you try soft /hard reset??
NO, this recent problem after upgraded the ROM to wm6
i tried all ROM, back to wm5 and wm6,wm6.1
Discussed in the Internet and found many people suffering from this problem But without a solution
Check your Active Sync Settings on your desktop computer....be sure to check "allow data connections on device when connected to PC".
Related
Hi everybody, I've just recieved my wireless LAN card and I'm having troubles finding documentation on how to do what I want to do. I actually want to do three things with my PDA once WiFi is working.
A I'd like to be able to ActiveSync through WiFi instead of connecting the cable. My laptop has a wireless LAN card, but I don't know how or if I need to set up a special connection between the two.
B I would like to be able to connect with my Magician through my laptop, so I can use its internet connection on my Magician.
C My Magician should also be able to connect to a wireless access point at my college, maybe I can have two network settings on my Magician so I wouldn't have to switch between them all the time?
Thanks very much from a Magician newbie .
Alright, scrap B, I managed to do that but I had to turn off WEP... If anyone knows how to keep the connection secure, let me know . But syncing still doesn't work via WiFi.
Edit: Scrap A as well, with a little bit of tinkering I think I got it done .
I can get all the items working but using my Wi-Fi network and not an Ad-Hoc.
All you need to do is go into Settings>Connections>Connections>Advanced>Select Networks> Here you select the "Internet" for both. This way you I use IE or email etc it connects into the internet and when I select Active Sync it also connects via the internet setting where it see's my "ActiveSync" running on my PC and connects. Make sure the tick box is tick against "Allow Network" in the activesync settings.
As for the Work side of things i dont have a wi-fi network but from memory once you set up the "Network Cards" on your PPC it will connect to which ever one it see's first, someone correct me if I'm wrong please.
ampda said:
I can get all the items working but using my Wi-Fi network and not an Ad-Hoc.
All you need to do is go into Settings>Connections>Connections>Advanced>Select Networks> Here you select the "Internet" for both. This way you I use IE or email etc it connects into the internet and when I select Active Sync it also connects via the internet setting where it see's my "ActiveSync" running on my PC and connects. Make sure the tick box is tick against "Allow Network" in the activesync settings.
As for the Work side of things i dont have a wi-fi network but from memory once you set up the "Network Cards" on your PPC it will connect to which ever one it see's first, someone correct me if I'm wrong please.
Click to expand...
Click to collapse
Hi, my spectec suddenly stopped working. The list show my wifi as available but am unable to go on the net. I have tried reinstalling the driver, doesn't work. This started yesterday, I have not changed or install anything else. Could it be a faulty card or faulty mini ? My wifi is working great on my notebook. WEP is off. What else can I do ? Thanks.
If all fails I try a hard reset and only install the Wi-Fi driver and go from there.
Do a complete backup with say Sprite Backup that way you can restore your PDA back to original.
The other option is to use the modified driver from the E300 Card found in this post
http://forum.xda-developers.com/viewtopic.php?t=27069&highlight=spectec+e300
But you need to uninstall the SPECTEC driver first.
Thanks ampda. Have uninstalled the spectec and will use the E300 as suggested. See how this works. Will only go to hard reset as a last resort or perhaps just wait for the universal ??? :lol:
Thanks ampda. Have uninstalled the spectec and will use the E300 as suggested. See how this works. Will only go to hard reset as a last resort or perhaps just wait for the universal ??? :lol:
Hellow, can you learn me how to connect active sync via wifi please ? Thank you. I have that same card
Alright, on your PC ActiveSync:
- File -> Connection Settings. I marked the USB and Ethernet options.
On your PDA:
- Start -> Settings -> Connections -> Network cards. Here select the network your PDA should connect to. It should connect to "The Internet", on the tab "Network key" I have selected Open and Disabled, because I use an ad-hoc connection.
That should do it, just hit sync on your PDA !
You may have to disable and enable your wireless connection on your PC to get things to work.
Slofsky said:
Alright, on your PC ActiveSync:
- File -> Connection Settings. I marked the USB and Ethernet options.
On your PDA:
- Start -> Settings -> Connections -> Network cards. Here select the network your PDA should connect to. It should connect to "The Internet", on the tab "Network key" I have selected Open and Disabled, because I use an ad-hoc connection.
That should do it, just hit sync on your PDA !
You may have to disable and enable your wireless connection on your PC to get things to work.
Click to expand...
Click to collapse
File -> Connection Settings. I marked the USB and Ethernet options.
On my active sync 4 i don't see ethernet options[/b]
I'm using version 3.8 and I see that option :O! Here, let me take a screenshot for you.
ActiveSync 4 has no syncing over network, it has been taken out. Go back to 3.8 if you wanna use it.
Private-Cowboy said:
ActiveSync 4 has no syncing over network, it has been taken out. Go back to 3.8 if you wanna use it.
Click to expand...
Click to collapse
OK thank you
You know MS developers have o get AS4 ready for the WM 5.0 release because WM 5.0 needs AS4. They were a little lazy so they got deadline problems and have to take network sync out for now. They will put it back in in a future update but AS4 as well as AS4.1 dont offer it right now.
it don't ghet it to work
Hi,
I have installed ROM 2.17.7.6 FRE.
When using EDGE, I do connect to the Internet with IE, but whenever my mobile to my laptop connected to the internet, the Wizard cannot access any site at all.
What does the connection status show when you tap the network icon on the top taskbar where it also displays the network info and signal strength?
The attached shows my MDA II's status when it is connected to my PC via USB and ActiveSync. Your display may differ since the Wizard uses WM5.
Hi Triband81
Does not say anyhting regarding internet connection over the PC. Just shows the network I am using (Orange).
Should I modify a setting somewhere for this?
OK that's certainly interesting. My guess is that it is somehow related to your ROM. I haven't used WM5 so I don't know if you have also make some changes to the ISP configuration settings under Menu --> Settings --> Connections Tab -->Connections (this is how to get to that menu in Windows Mobile 2003 Second Edition).
On the ActiveSync Box when connected with USB.
Click FILE > Connection Settings
and make sure that for the setting "This Computer is Connected to:"
is set to Internet.
Had this problem before and when i changed that to internet, it worked.
Hope this helps
It works!
Thx rxr! That was it.
Cool,
thanks for the heads up, rxr. I'll remember to check there if I should have any problems.
can anyone help me on how to connect to the internet via Wi-Fi without using GPRS.
turn wifi on. it must serch acess points automaticly. then follow instruction. at least, you must know password or your MAC adress must be registred on internet provider.
Hi I have a O2 Atom and tried connecting WI-FI with my Laptop but it would not. Can you tell me the procedure. I tired turning the Wifi on but it will not. I went to settings>connections>wifi Utility>Menu>Turn On Wifi but it just shows satuts as Wifioff. I checked in Menu>about and it shows Driver Version: Wifi not enabled, Firmware Version: Wifi not enabled, Mac Address: Wifi not enabled.
I am using the latest ROM Official update. What could be the problem? Is there any tweak to solve this problem. Please assist someone.
if you have the latest ROM, use wireless manager to turn on wifi.
tap on anthena on upper bar, then tap "wireless manager", then turn wifi on.
regards
Wifi OFF Will not turn on
I tired it but it would not turn on. I can turn on and off the radio or the bluetooth but the wireless. Would not go on. So I tired through Settings as mentioned before but that too does not help. Please tell me what I can do?
1. Run selftest, to be sure, that it isn't hardware problem
2. Try HARD RESET
In your notebook configure wireless software to Ad Roc, default is infrastructure
I tired Self Diagnostic and the WLAN Module Test Detected a Mac Addr: 02-02-b3-92-a8-c4. Then I reset and then tried to turn it on but does not turn on.
I checked my computer settings and it is set to Ad-Hoc. :?
Please someone assist me
I have noted one thing for sure that when I am away from my computer and have checked the wireless Manager shows the Wifi: Off.
When I click Menu > Wi-fi Settings it goes to creating a new profile. But when I am close to this laptop I want to connect to the profile page does not show. :!: :!:
WHY is this happening :?: :?: :?: :?: :?:
SOLUTION to WIFI Problem In O2 Atom
I had tremendous problems with my O2 WIFI which would not connect to my laptop WIFI LAN Network. I asked O2 People & Lot of people on this and other forum but got no perfect response.
Practically trying many options I by chance put back the old ROM upgrade of O2 2006123-45 and tried switching on the WIFI and lo and behold it worked fine.
Then I reload the new ROM 20060426 again and it works fine.
This proves that if you reload the NEW Upgrade ROM more than once it locks the WIFI.
Wi-fi Shut-off when we do the first activesync.
I tried closing all programs by going to settings => memory => running programs => close all.
After that I did the soft reset and started the process "Start => Settings => Connections => WiFi Utility => Menu => Turn on WiFi.
Menu => Jump to Network Cards 3. Under Wireless, select your desired network. (If your network is hidden, kindly tap on "Add New")
Enter your network name (if needed), proceed to Network Key.
Select your Authentication, Data Encryption type and your Network key.
Proceed to 802.1x if needed (it is usually disabled)
Tap on Ok, go to Network Adapters => O2 Wi-Fi Wireless Adapter
Configure your IP and Name Server if needed. (If your network allows automatic assign, you might want to exclude this portion)
Tap on Ok, Ok. Proceed to WiFi Status, check if the status is Connected and IP Address is obtained.
Kindly try to use Internet Explorer to surf the internet"
and started the Wi-fi but it would not go on it showed Wi-fi off instead of the routine radio off.
When if went to Wi-fi => about. It showed Driver: Wi-fi not enabled, Firmware Version: Wi-fi not enabled, MAC Address: Wi-fi not enabled.
I tried the hard reset also yet the Wi-fi would not turn on.
So I reinstalled latest version 20060426-mot0822 of the Atom and before I did activesync I ran the Wi-fi and it worked well . After the first Activesync the same problem started.
For Activesync I am using the new version 4.5.0, Build 5059, Beta taken from the Microsoft site where it has the facility to keep on the Allow wireless connection on device when connected to the desktop yet the Wi-fi switches off.
There seems to be a problem with you software and your technical department needs to study it deeply and provide a suitable solution for it
Will it be the same if we will to connect to the internet in a hotspot area???
Dude i had the same problem..use the wi fi companion program i got off the net (illegal srry cant post it here)..it has fixed all my wi fi problem.
pocket msn
When I access my wifi... I can surf my internet but I can't sign in my pocket msn messenger. How shuold I fix it?
hsanghavi said:
I tired it but it would not turn on. I can turn on and off the radio or the bluetooth but the wireless. Would not go on. So I tired through Settings as mentioned before but that too does not help. Please tell me what I can do?
Click to expand...
Click to collapse
Wifi doesnt work if you are using the usb port as it will connect to your computer. I guess that is the problem for you?
My phone is 577W ,and i am using WM6.1 Pro, and when i had connected to a wifi router ,where can i see the connection state of wifi,such as IP and other things???
Start, Settings, Connections, there should be a Wifi and Wireless LAN.
Thanks
Dave
i know how to set wifi, but when i had connected to a router,i still couldn't find where i can see the connection status ??? double click the tray icon ?? there is nothing ?
My IP, the Router SSID, Mac address etc are all in Wireless LAN
Dave
maybe is the problem of my system? the items in setting -> connection are
wifi ,blue tooth, wireless manager , wireless receive & send , connection , name register, there is not a item called wireless LAN ??
elequent said:
maybe is the problem of my system? the items in setting -> connection are
wifi ,blue tooth, wireless manager , wireless receive & send , connection , name register, there is not a item called wireless LAN ??
Click to expand...
Click to collapse
Ah, I don't know where to install it from.
The exe is called WLANSettings.exe on my Kaiser ROM.
I think it is also called WLanMgr.exe on other ROMs.
Thanks
Dave
I couldn't find both of them on my phone , so maybe I should update my system sometime. Thank you very much ,Dave.
hi everyone...
i believe all of u can help me with your expertise...
my problem is:
my wifi connection is ok, and no problem with the internet if i browse using my pc. just recently, my hd couldnt browse the internet...
last time when i bought the hd, it was all ok...
any advise?
tajboy said:
hi everyone...
i believe all of u can help me with your expertise...
my problem is:
my wifi connection is ok, and no problem with the internet if i browse using my pc. just recently, my hd couldnt browse the internet...
last time when i bought the hd, it was all ok...
any advise?
Click to expand...
Click to collapse
What exactly is the problem? When connected via wifi, you are unable to surf the net, update stock & weather? Or is it just internet access?
Go to Settings > connections > wifi > wireless networks > network adaptors and set 'My network cards connects to' to 'the internet'
Would also change Settings > connections > wifi > advanced > power mode and set this at best performance
Let me know if this works
Is the problem with just surfing the internet, or no internet at all? You can try to update the weather and/or stocks, just to see if the problem is with the connectivity (in which case you should try to follow the previous advice) or with the browser itself (for example with Black Perl ROM the first time you open Opera, there is a problem with rendering of the page, so you have to close it and reopen again).
Fallen Spartan said:
What exactly is the problem? When connected via wifi, you are unable to surf the net, update stock & weather? Or is it just internet access?
Go to Settings > connections > wifi > wireless networks > network adaptors and set 'My network cards connects to' to 'the internet'
Would also change Settings > connections > wifi > advanced > power mode and set this at best performance
Let me know if this works
Click to expand...
Click to collapse
i've tried the settings but it seems to appear the same problem...
when i try to open yahoo, it says "could not locate remote server, bla bla bla... make sure your internet connection is active and check whether other applications that rely on the same connection working".
i also tried to update the weather and it says "there was a connection error while attempting to download weather data".
any idea?
tajboy said:
i've tried the settings but it seems to appear the same problem...
when i try to open yahoo, it says "could not locate remote server, bla bla bla... make sure your internet connection is active and check whether other applications that rely on the same connection working".
i also tried to update the weather and it says "there was a connection error while attempting to download weather data".
any idea?
Click to expand...
Click to collapse
Are you connected to active sync or wmdc while you are trying to access the net (i.e. do you have your phone plugged into you pc)?
Check |START|SETTINGS|CONNECTIONS|USB To PC| and make sure you have "Enable advanced network functionality" checked.
If all else fails, soft reset, if that fails... hard reset
If in Internet explorer is ok then Check opera:config for a wrong proxi !
(opera keep setings from last conections)
buzz83 said:
Are you connected to active sync or wmdc while you are trying to access the net (i.e. do you have your phone plugged into you pc)?
Check |START|SETTINGS|CONNECTIONS|USB To PC| and make sure you have "Enable advanced network functionality" checked.
If all else fails, soft reset, if that fails... hard reset
Click to expand...
Click to collapse
my hd wasnt connected to pc... i even tried to connect using my 3g...
the 3g is connected but still cant browse the internet... i dont think theres a problem with my opera... since i tried to update the weather it appears the same errors..
I had this problem today - wifi connected but opera and weather updates not working.
I selected
Start->Settings->Connections(tab)->Connections(icon)->Advanced->Select Networks
and set "Programs that automatically connect to the Internet should connect using:" = "My Work Network" (was "Orange Internet").
This worked fine and I can now surf and download. I don't know if it will affect my 3g connection yet but I will try it later.
install schaps advanced config and disable "Proxy Auto Detection" in Internet Explorer section
Is your problem similar to this?
http://forum.xda-developers.com/showthread.php?t=508418
Sorry for not having the solution, just trying to determin what would be the cause.
Which firmware do you have?
perhaps it will be easier to change it directly in the registry.
one can see that this is not relevant to internet explorer only.
Code:
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings]
"EnableAutoDetect"=dword:00000000
MDuarte said:
Is your problem similar to this?
http://forum.xda-developers.com/showthread.php?t=508418
Sorry for not having the solution, just trying to determin what would be the cause.
Which firmware do you have?
Click to expand...
Click to collapse
my problem is similar to this.... maybe i'll try to take my hd to the htc stores so that they can check for... i've tried all the reccomendations in this forum.. once i figured how to fix it, i'll post the solution... thanks guys
Worked for me as well.
thezenmaster said:
I had this problem today - wifi connected but opera and weather updates not working.
I selected
Start->Settings->Connections(tab)->Connections(icon)->Advanced->Select Networks
and set "Programs that automatically connect to the Internet should connect using:" = "My Work Network" (was "Orange Internet").
This worked fine and I can now surf and download. I don't know if it will affect my 3g connection yet but I will try it later.
Click to expand...
Click to collapse
Thanks, this solution worked for me as well. Wifi and 3g both work with "My Work Network"