Related
Hi, I know that here ais lot of threads about removing hrad-spl, but noone works for me.
I cant connect my Herald to computer (activesync doesnt want to be connected).
Can anyone help me how to flash original spl prom sdcard or from bootloader (i cant flash any rom from bootloader, i only cant use sctivesync)
I hope you can uderstand me, and i hope you will help me. Thx Stepan
i've never heard of anybody removing spl using SD card flash, but heres how it SHOULD go.
extract the SPL.nbh from an RUU using something like 7-zip
extract it to root of memory card and rename heraimg.nbh
go into bootloader, it should detect
follow instructions on screen (slide side slider)
wait (it takes unusally long for sdcard flashes)
I tried this, but it doesnt work :-( I need to get it repaired.
any other sugestion?
I tried sspl (jumpSpl) and It dosnt work, there is only white screen after running it :-(
I need help, please.
How to remove HARD-SPL withou activesync.
Thank you very much.
how do you mean it didn't work?
you tried the SD card method right?
it didn't work how?
So. I flasher SPL.nbh, and nothing happened. I think it is because of overwrite protection of that hard-spl (right?)...
Does anyone know how to make sspl (jumpSpl) working?
Or how remove hardspl overwrite protection, or how to overwrite hardspl.
thx
Does anyone know how to get back original SPL, without activesync?
I need my Herald
if you can't connect to your computer even in bootloader then something might be worng with your herald's mobo or something
I CAN connect to pc if i am in bootloader (i can flash rom from bootloader).
I cant olny connect to activesync :-(
Dou you have any solution in this case?
you don't need activesync to flash rom from bootloader. you just need that generic "pocket pc" connection. Try using the un-HSPL process while your device is in bootloader
I have just bought a singapore Sim locked handset .. I need to Flash a english rom and unlock it .. i have downloaded the rom the Hard spl but before that i was trying to update using SEUS but it went to the bootloader mode and itdetected the drivers then suddenly says one of the usb is malfunctioned and cannot reconize the device now i have tried 3 systems but nogo...i need help to get hardspl installed without using the usb port and a computer and then i can flash a eng rom on it using msd card.. and i have tried hard reset/chking in bootloader mode/and active sync also not working
have you try this?
Program --- Setting -- Connection ---USB to PC
clear ..... Enable advanced network funcionality
(Clear this check box if Activesync does not recognize the device)
goodluck
Or flash it with a generic ROM using the microsd method.
EDIT: Never mind. Read the first post too quick.
Thanks a lot .. it worked .....i unchecked it and it worked i have a english version of it now ..now one more problem left is simlock any solutions for that???? thnks a lot for helping me appreciated
Few days ago my Wizard died all of a sudden. When turned on it only gets to the point when it shows "HTC smart mobility" and stays there. So not even to the screen with IPL, SPL. I tried soft/hard resetting, playing with battery but it was all no go, same.
I can get to the red-green-blue bootloader screen however, shows IPL 3.08, SPL 3.08. If i connect via USB cable to computer, bootloader screen shows "USB" on bottom. The ROM on the device was TNT's (not sure which version), Windows Mobile 6.1. It worked for ages without any problems with this ROM before this.
ActiveSync does not recognise Wizard at all, I cannot establish connection and therefore downgrade/upgrade the ROM becouse upgrade programs (for exmaple with ROM got originally with the device) say they cannot contact the device.
What are my options, please help.
hy
in my opinion , it is normal for active sync to not recognize your phone , because it's not turn on properly ,i mean it only recognize the phone when you enter windows mobile.
if i were you i would try to flash any rom i like and see if it works. i hope this helps
But ROM upgrade/downgrade program requires ActiveSync connection to run and I can't establish it...How to solve the situation, please advise?
when you are in bootloader screen and your phone is connected to the pc by usb cable just start the downgrade/upgrade program and it should work.
i did that. rom update utility complains that it cannot connect with mobile...
that was tried with:
1. official t-mobile ROM that was on the device when I got it
2. CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE ROM
my IPL and SPL versions now are 3.08
sorry , i can't think of anything that might help you.
same problem
phones a brick.
I can get to the bootloader , i can even perform a succesful hard reset.
But it doesnt get recognized by the computer in bootloader mode. is there any way to flash the rom if the computer doesnt recognize the device?
regards
Try this look for nbd v8.1 or v8.3 .
hold the camera button and do a soft reset but keep holding the camera button until the 3 color screen comes up it should sync your phone then run the nbd rom or original cingular ship rom like this one ** RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_1 ** i prefer original then other but that's me. Hope this help you.
Hello everyone!
I got a HTC Prophet with english windows mobile. I've wanted to install a german ROM, and used this:
http://www.handy-faq.de/forum/htc_p...ophet_touch_ix_rom_deutsch_download_1005.html
I've runned a .bat file and the installation startet. But then i closed the window with the installation insinde (undeliberate). and now the prophet won't load windows. it always stops at the boot screen, where the infos are:
IPL 2.15.0001
SPL 2.20.0001
I can run the BootLoader mode and connect the Prophet to my PC. on the left bottom it says "USB" but when I run the installation again it says "no device connected".
i got windows 7 ultimate in 32bit version.
I hope you can help me, 'cause it's the phone from my dad and i won't get him angry
Greetings from Germany!
Bianca
geffi said:
Hello everyone!
I got a HTC Prophet with english windows mobile. I've wanted to install a german ROM, and used this:
http://www.handy-faq.de/forum/htc_p...ophet_touch_ix_rom_deutsch_download_1005.html
I've runned a .bat file and the installation startet. But then i closed the window with the installation insinde (undeliberate). and now the prophet won't load windows. it always stops at the boot screen, where the infos are:
IPL 2.15.0001
SPL 2.20.0001
I can run the BootLoader mode and connect the Prophet to my PC. on the left bottom it says "USB" but when I run the installation again it says "no device connected".
i got windows 7 ultimate in 32bit version.
I hope you can help me, 'cause it's the phone from my dad and i won't get him angry
Greetings from Germany!
Bianca
Click to expand...
Click to collapse
Hi this is a easy problem to fix dont worry but first u need to read this http://forum.xda-developers.com/showthread.php?t=353547 you need to hardspl your device first then install the NVID rom in the link read the recovery solutions carefully oh and about active synce try this
Go in to Active Synce settings and uncheck allow usb connections that will help to detect your device when flashing the NVID rom after that just use any flashing tool to install the rom on your device problem solved just read the link if u dont understand as this happened to all of us before so we understand how u must feel
Hope this helps
Heya and thanks for your answer!
I did read the terms of use in the post u linked, but I got always the same problem:
No device is found. on the BootLoaderScreen it says "USB" and Windows 7 detected the Mobile Phone.
But the HardSPL didn't found the phone
I try to take the battery out and put it in after one minute, but it didn't work
geffi said:
Heya and thanks for your answer!
I did read the terms of use in the post u linked, but I got always the same problem:
No device is found. on the BootLoaderScreen it says "USB" and Windows 7 detected the Mobile Phone.
But the HardSPL didn't found the phone
I try to take the battery out and put it in after one minute, but it didn't work
Click to expand...
Click to collapse
Did you try flashing the NVID - AKU 2.* WM5 rom for recovering your Prophet on your device first then hardSPL your device? you need to install the rom first then hardspl it after that flash any other rom here http://www.4shared.com/file/57952591/3955ed98/NVID_RUU.html?dirPwdVerified=2948f2e flash this to your device and remember to uncheck allow USB Connections in active sync and just it should work if u still need more help al be happy to help you out and since ur using windows 7 use this tool to flash any rom to your device ok http://forum.xda-developers.com/showthread.php?t=534707 since am using both vista and xp and they work well so remember flash the NVID rom first then hardspl and try flashing back the rom you wanted to use on your device ok
hey!
i installted Windows XP and then load the HTC Prophet in BootLoaderMode.
I do HardSPL and it works. Then I install thisNVID. The phone rebootet, but windows didn't load. when i try to install the rom (i posted the link in first post) but it says already, that no device is connected.
the phone didn't load windows
geffi said:
hey!
i installted Windows XP and then load the HTC Prophet in BootLoaderMode.
I do HardSPL and it works. Then I install this NVID. The phone rebootet, but windows didn't load. when i try to install the rom (i posted the link in first post) but it says already, that no device is connected.
the phone didn't load windows
Click to expand...
Click to collapse
Sorry but first you need to recover your device by first installing the NVID rom and good u have windows xp did you did what i said about active sync uncheck allow usb connects then flash the NIV rom then use lazytool thats what i use on my windows xp to flash the rom u wana use what happened when u try to install the NVID rom? first you must manualy go too the bootloader menu in other to flash it you know reset the device and hold both the commanager and camura button until you enter the bootloader menu then flash the NVID rom if it works then do a hardspl then flash any roms using lazytool it should work when u said the phone rebooted but windows did not run what did you see on the screen? after the reboot? also the NVID rom is windows mobile 5 so you device should boot up windows but al look into this for you ok
PS this is important you should know that your device is G3 or G4 and from the looks of you spl it looks like a G4 device this is very important beouse if u flashed with G3 you can damage ur device but dont worry the guys here have managed to fix this so if ur flashing any rom use the G4 option ok but please look over these instructions http://forum.xda-developers.com/showthread.php?t=353547 as they helped me when i had the same problem
I just Private message you check ur inbox
When i made soft reset (after install any program). mda made hard reset and start bootloader mode. I can't write new rom. What can i do? If i start installing flash rom .exe after few whiles:error 201: get device data error. CAN NOT GET DEVICE DATA
Mod. edit: not dev related, moved to general
gl though
marcin-25 said:
When i made soft reset (after install any program). mda made hard reset and start bootloader mode. I can't write new rom. What can i do? If i start installing flash rom .exe after few whiles:error 201: get device data error. CAN NOT GET DEVICE DATA
Click to expand...
Click to collapse
I had same problem. I just remove battery and wait sometime. It should fix that. Well.. for me it fixed
Yes it's works, but is any chance to fixed it, upgrade new rom or something.
Prapably someone tryied upgrade bigstoragerom. If i could have backup rom, that's no problem, but i don't have. Other rom not start from sd card
I installed WWE 03, because it don't change radio. There was my problem. When I tryed to install roms before i change radio to 1.12 and wwe 03 work fine. So try like I do But you need install via usb cable and windows xp like i do (I don't have windows xp in my pc so I used Vmware workstation)
What's that rom WWE 03? I have 1.00.10 radio, rom 1.13.00 WWE, so? Could you send me working rom, who can flash my pda?
WWE 03 is cotulla rom. It had windows mobile 6.1. And I tryed to install this one, but lot time had errors. Firstly, I try to install this rom and I finaly upgraded radio with this rom 1.12, but OS installation stuck on 0%, so I cancel it. Noww I tried install this rom and everything working. No bootloader after soft reset, working good
Whitch rom you upgrade radio? your link not work I try to install WWE 03, but. i run upgrade.exe, next : your device software is about to be upadte from: (empty) to: (empty) . I click upgrade and here Checing the inforamtion on your device ... please wait, and i'm waiting sooo long :/ nothing change. I think that i must upgrade radio to 1.12, but how? I try many way
First link should work. It work for me. To succesfuly check your devise you should connect pc and PDA via active syns with windows XP. Then it will check your device and upgrade should work for me it worked
I have connected pda (windows xp) activesyns. Always, every rom, whitch i want to upgrade: update from: (empty) to: (empty). Only if i turn ON pda, then upgrade from: 1.0.10 to 1.12, click NEXT and pda goes to bootloader. "checking devace data" and nothing happened. I thing the last chance is upgrade rom from sd card in bootloader mode, but it must be backup rom from own pda This is the end :/ i may throw my megican to trash. Thanks for answers.
You should turn on PDA then connect to pc after that will be upgrade from to filled. When you click next automaticly go to bootloader and install new rom
Yes, i try that. Turn on, connect, upgrade, then pda goes to bootloader mode and nothing happened - "checking device infromation ...... " all the time. Do you know any way to upgrade from the sd card. I can't do a backup and change 416 bytes in new roms, like a say xda-developers tutorial. Without that pda not flash new rom from sd.
If you know anyone from your friends that have magician try get backup from him. If you don't have, last thing that I can advise, try other roms. You can find it there