My current PPC 6800 camera app only creates filenames like IMAGE_001, etc
I had a PPC 6700 and the camera app on that gave me the option to create filenames that were timestamps -> 20081123132345.jpg (YYYYMMDDHHMMSS.jpg)
I need to replace the camera app on my 6800 to one that worked like the camera app on my 6700 (or something similar). Please note that I do not have my 6700 any more so a simple "Copy it off you old phone" won't work.
Can someone please u/l a copy of the camera app from the 6700 so I can switch out the one I have on my 6800.
TIA
Related
My mini has this habit of creating alot of folders like 0504080001, 0505080001, and so on to store my pictures taken from its camera. It's very frustrating to navigate each folder just to find one photo. Any one knows how to disable it from creating such folders and instead just store all my photos under ONE folder??
thanks!
You need to upgrade the camera to the latest version either by upgrading the ROM (1.12) or by finding an installer for the camera app itself (don't know if it exists for the latest ROM version)
Does the 1.12 ROM give us the facility to store all the pictures in one folder?
say I just leave the multiple folders alone, can we actually view ALL the pictures under Album, without having to switch from one folder to another??
???
nobody knows if it is possible to display all photos as if they were in the same folder???
If you use the application "Pictures" you can select to see all the pictures from the SD Card as if it was in the same folder.
has this problem of multi directory been fixed yet? I am having the same problem.
I notice the camera app. in wm5 dopod 818 pro doesnt' have this problem.
I have had some suggestions on how to semi-permanently disable the camers so I can go into buildings where cameras are not allowed. I guess the best was to overwrite the camera.dll file with a blank (unless someone has a better idea??) Can anyone help me I find, back up and replace the old .dll file on my new Tmobile MDA Vario Wizard? I can not seem to access these type files and see the extensions from active sync to my laptop.
Thanks for any help,
Kube
How Do I Disable the Camera on MDA?
Isn't easier just to give the hardware button another function...?
(Allthough everybody knows you can rename files and still can use the formerly used function. I know, as a navy weapon engineer, I won't risk it and still won't allow it!!!)
In Windows, go to Control Panel, Folder Options, View tab, and check Show hidden files and folders. This will allow you to see all files on your Wizard and PC.
any place that actually cares that you not bring a camera in is not going to be satisfied with a software fix.
that said, how about a small piece of electrical tape over the lens?
Disable the Camera Reply
Thanks for the tips so far. Reply to tips: I have already assigned the camera button on the side to contacts but you can still turn on camera via programs. I would like to pop out the lens, but can't find out how to do this?? I have already put a lable over the lens a temp fix. The change in control panel to view hidden files through active sync worked to find the camerapicturedll and video files. How can I create a .dll with no info? Then I could replace the .dlls I have copied off and saved. Perhaps I could just delete them, but I have not tried and not sure it will let me. Any thoughts?
Hi! I was wondering if anyone can tell me if there is a way to assign a hardware button for the camera flashlight or even a screen icon. I read somewhere that somebody was working on a program for it. Thank you for your time.
Look for a proggy called pflash. It'll turn your screen white and temporarily disable the backlishgt timer. assign that to a hardware button and you're done.
Thanks Nate, I was hoping there was a program that would use the camera's led flash as a torch. I found veejay's program, unfortunately it didn't work for my mda. I'll give pflash a try though.
No prob, I think it was a free proggy by David Anders (easy enough to find via google). He's also got an AWESOME RSS reader too.
I've got my MS Voice Command on my 8125 and added a shortcut to Pflash to the \windows\programs directory and renamed it flashlight and VC hs no trouble understanding it and calling it too!
Flashlight with Mortscript
Maybe you can try with this.
Unzip both attached files.
Install Mortscript app and copy flash.mscr file to PPC.
Run flash.mscr file.
It works on my Atom Exec/WM5. The .mscr file sorta run the test Flash command from the Atom Exec's Self Diagnostics apps.
Cheers,
del0000
Plamp
Found plamp here
http://www.freewareppc.com/misc/plamp.shtml
WM5 compatible - HTC Phones only
This program is used to permit control of the flash light on various HTC Phones, to allow it to be used as a torch etc.
Note: this app may will cause permanent damage to your flash led over prolonged periods.
The app will disable itself after prolonged use, but still, use it at your own risk.
I cannot confirm what hardware it will work on, other then the Universal phone.
look here: http://www.vijay555.com/?Releases:VJCandela
Juncker - my app is not compatible with wizard. I don't have a wizard to test on so never wrote support for it.
V
del0000 said:
Maybe you can try with this.
Unzip both attached files.
Install Mortscript app and copy flash.mscr file to PPC.
Run flash.mscr file.
It works on my Atom Exec/WM5. The .mscr file sorta run the test Flash command from the Atom Exec's Self Diagnostics apps.
Cheers,
del0000
Click to expand...
Click to collapse
That worked really well.
What abt the light dmg topic... use long time = killing the light?
Anybody have any luck running that mscr on the 8125? I couldn't get it to work
I haven't found any other way to control the flash w/o starting up the camera...
del0000 said:
Maybe you can try with this.
Unzip both attached files.
Install Mortscript app and copy flash.mscr file to PPC.
Run flash.mscr file.
It works on my Atom Exec/WM5. The .mscr file sorta run the test Flash command from the Atom Exec's Self Diagnostics apps.
Cheers,
del0000
Click to expand...
Click to collapse
can i make this work on ATOM?
Do something work for the wizard now?
At this point, still no. But I for one would be willing to put my wizard on the line to test a version of vijay555's program for the wizard.
Can anyone go to this site and download the webview.exe file launch the dll module and show the controls for my security cameras on their pda or pocket pc.
I have tried this on the 700wx and also on the 6800 mogul. I like the mogul much better so I took the treo back.
I can get to this site from a regular size desktop and also my laptop. When you go to the site it asks you to download the webview.exe file and run it. This puts the webview.dll file (module) in the same directory that you downloaded the webview.exe file to; with no problems. It then launches the web interface with a login screen. You login to the server and look at the 16 cameras in real time. When I try with my mogul I get a message that says webview.exe is "not a pocket pc application"
I tried copying and pasting the webview.dll file to my mogul but I don't know where to put it or how to launch the webview.dll module.
the compression I am using to show the live stream is h.264 or I can use mpeg4.
IP address: 70.63.106.214
Please help....
Greg
Hmmmmm
I 'm on the XDA's developers site;I just knew all my questions would be answered by now.
Look Guys, I don't want to come off sounding like a pompous idiot who thinks he can prod u guys into doing his homework for him. It's just that I got this 6800 on recomendations that I had read in the forums and I really do want to keep this one.
I have purchased three phones in the past week. I started out with the Treo 755p took it back because it had the Palm OS I was sure that was not going to work, but the Sprint sales guy assured me this was better than the 700wx because in his opinion Palm OS was better than WM5. I played with it for two days reboxed and took it back, I switched it for the 700wx because it has Windows OS the best and newest thing in Palm. He was right; it is, if you don't have a need to see streaming security cameras.
I took it back to another sprint store because the guy had gotten frustrated and says to me He can not switch phones more than once. Hmmmmmm
In the past few days I have been reading the forums; I think it was at Treocentral, or somewhere and I came across one of those articles' "which is better types" TREO or Mogul, I went to the Sprint store in our super mall and I found a working display of the Mogul.
I played with the thing for about two minutes and was blown away. I said to my self I have to get this to work for the security web cams; but not just for the camera's; I want to offer this as a turn key solution to my client...He has a treo 700w. I know he is going to be pleased with this. The size difference in the screen; the sliding keyboard, I am nuts about this thing already....
I'm not talking about jpeg's refreshing every 5 sec; I'm talking live streaming video from 16 cameras with the option to control PTZ's
All I Have to do is get the Internet explorer part on the Mogul, to work with the camera's software request to download and install webview.dll I don't know where to put this file on the Mogul, I don't know how to put it on the Mogul (yet). Ihave only had the Mogul for one day
go to the site, and please help
The Ip address is 70.63.106.214
if the exe was written for desktop windows its not going to run on windows mobile, simple as that, youll have to see if the company that makes the security cameras also makes a pocket pc app for them
gmboat1 said:
When I try with my mogul I get a message that says webview.exe is "not a pocket pc application"
Click to expand...
Click to collapse
And there is your answer.
It isn't a PocketPC application. And you are trying to run it on a PocketPC.
Won't work.
The only occasional exception is .net applications that sometimes work on a desktop and PDA.
What brand of camera are you connecting to? There are some apps out there for network cameras so I may be able to help you.
Good point!
defaultdotxbe said:
if the exe was written for desktop windows its not going to run on windows mobile, simple as that, youll have to see if the company that makes the security cameras also makes a pocket pc app for them
Click to expand...
Click to collapse
I guess I was thinking about installing the webview.dll and that would have solved the problem. I am not sure about the software for the camera maufacturer they are from China, and not much info to go on...
When I go to the site: HTTP://70.63.106.214/default.ht
I get this msg: "To enable control work: Tools-> Internet Options-> Security-> Custom Level Reset to: low or Download and Install it
When I download and install the file; (webview.exe) it is a executable that unpacks webview.dll ver. 2.0, in the same folder with webview.exe.
I did not realize or I am not sure if the webview.exe is the program interface for the application to work, but now that makes sense. I thought the httpsvr.exe that is running on the DVR PC was the app for the web interface and would allow all this to work on any platform.
I guess if there is a way to decompile the webview.exe and make the neccessary changes to include the pocket pc header information; recompile it, test it, fix it test it again. then this would probably work. There is not enough information on the software manufacturers to begin trying to find a solution for this.
I have absolutly no programming skills. I realize now, that this may be a question for the developer/hack forum.
I would like to give it a try though. So if you can point me in the right direction; or if the Mods would repost this thred in the Dev/hack forum; maybe those guys would probably know what tools I would need to get started in this.
I appreciate all your help and it has made me think about the resolution, and the approach to my problem in a different way. Thanks
Greg
PC based DVR
ScottC said:
And there is your answer.
It isn't a PocketPC application. And you are trying to run it on a PocketPC.
Won't work.
The only occasional exception is .net applications that sometimes work on a desktop and PDA.
What brand of camera are you connecting to? There are some apps out there for network cameras so I may be able to help you.
Click to expand...
Click to collapse
They are not Internet Cams; I have the regular BNC connectors that pigtale into a 15 pin video connector that attaches to a PCI camera card 8 cams, I have two of the camera cards installed in each pc. I also have an ATI radeon 9550 with wideo out for the hardware compression of the video signal to the PC monitor this works for NTSC and PAL signals.
Hi,
I'm really interested in trying PocketCM ImageViewer 0.4, but I can't get it to run on either my X7501 or my HTC Universal. When I run the .exe, an ImageViewer app shows up in my task manager, but if I switch to the app the device is non-responsive. I've tried running the .exe file in different directories, ones with small images/large, all jpg files, the program directory, etc - no luck.
App: http://www.pocketcm.com/imageviewer.php
XDA Thread: http://forum.xda-developers.com/showthread.php?t=333559
Has anyone had any success getting it to work on this device?
Galt
**Edit** - Ok, tracked down version .3, works really great, performance even with large images is pretty amazing. Renaming all my .jpg to .JPG now...
http://pocketcm.com/downloadfile.php?f=ImageViewer-0.3.zip