Database Users

[REQ] HTC touch apps

i have a tmobile Wing running wm6 and i have tried all htc touch apps on this website and they dont work for me... can someone either upload working apps(like the contact manager, the comm. manager, the cube thing) or upload a working ROM of the HTC touch(which will work on the WING) for the 64 bit computer??

how are you installing them?
you realise you put the cab file onto the phone then execute it there rather than your pc right?
thats the impression i get from your post...

yes i know that, i am not a nub... i have installed many apps, but they end up screwing up my phone cause it works so slowly

bump ...

All the HTC touch apps that I found from explode, they all work fine on my SX66.
Can you describe more about your phone, and how you install the application?
What symptom/behaviour are you seeing on your phone?

well, i transfer it to my storage card, and then run it. later i get a successfully installed message. i soft-reset my phone and then either the program doesn't start up, puts my phhone in a infinate reset mode, or doesnt work correctly.
the htc cube is installed, but i can see the cube! i see this S icon, and a P icon when i slide my finger from bottom to up . since it didnt work, i unistalled it.
the contact manager from the all htc apps extracted sticky starts up, but i cannot change the theme! i see the regular old contacts manager with a white bar, when i run my finger over it, it shows a letter, and scrolls to it, but doesnt have the touch interface i need, and its not graphical at all
and the comm. manager REMOVES my comm. manager, rather than adding one
i am running wm6, boots fine now, the following htc apps
-audio manager
-htc touch theme
-htc album
-htc touch skin for wmp
-spb backup
-htc touch wait cursor(got from freewarepocketpc.net)
that should explain a lot

mr_ding said:
All the HTC touch apps that I found from explode, they all work fine on my SX66.
Can you describe more about your phone, and how you install the application?
What symptom/behaviour are you seeing on your phone?
Click to expand...
Click to collapse
explode? can you please post some links and i will try them and replay asap

The 'htc cube' your talkin about is not the actual cube. its called FTouchFlo and is used to scroll and launch programs by using gestures. the changing between s and p is changing between launching mode and scrolling mode. What your looking for is the TouchFlo cube, which i belive must be cooked into a rom to work well. there are other options out there that can be cab installed, just search around the forums.

u mean something like this?
http://forum.xda-developers.com/showthread.php?t=343583
i tried that but in the instructions, i dont know what the prequisites are n i dont have em
i copied the shortcuts to the startup folder and then i ran the program in the folder containting the exe file that came with the zip
can someone post a cab, that i run, and will configure my phone that it works... i dont want to do the "remove the following apps from the startup folder...", the cab file should do that...

i also have problem with touchflo. i saw a lot of threads on it and i dun know which 1 i have to follow and install.
and if any expert here can help me.
1. i am on wm6. not htc theme.
2. i am on wisbar and wisbar desktop
3. device is atom life.
and i want to use the touchflo. can anyone assist me?
can i do the swiping even my screen is on the wisbar?
can anyone help me with this.
help is greatly appreciated.
thanks!

htc theme is not an operating system. it just alters the way it looks. im runnign wm6 also
wisbar is okay and i dont think it affects touchflo, except wisbar uses up too much memory
so who ever has touchflo working on wm6, can u please post a link to the file, and specific instructions on how to install?

killeredge said:
htc theme is not an operating system. it just alters the way it looks. im runnign wm6 also
wisbar is okay and i dont think it affects touchflo, except wisbar uses up too much memory
so who ever has touchflo working on wm6, can u please post a link to the file, and specific instructions on how to install?
Click to expand...
Click to collapse
yes. i want also.

bump? ...

bump ??

come on ppl, i am sure that someone has gotten touchflo to work

HTC Weather App

Is anyone else having trouble with the weather app on the diamond. I keep getting the connection error dialogue box no matter how i try to connect to get the updates.

Yes there was a problem with this yesterday but today everything is ok for me ... if not try this http://forum.xda-developers.com/showthread.php?p=2821451&posted=30#post2821451

it wasnt working a few days ago, however just checked it now and it seems its working

I got the same problem for a day, then I reload the new juicy rom 2.6 problem solve.

Sorted
Thanks guys, the database editor set default url did the trick.

htc weather app
I think I may have fixed this issue on my phone. I guess alot of phones are having this problem. I found that my manilla files for the sprint TF3D theme was missing a file. So I installed the andreas falke weather database and it installed the missing file and now it works fine.

Hello everybody,i'm quite new to the windows mobile platform,just got my Touch Diamond a few months ago and i have the original HTC Rom instaled.Yesterday i was experiencing problems with the weather app and read this topic and the on given in the second replay,and decided do give it one more then to see if it will work on it's own.Today i went in the "Settings Tab" - "Data" Tab and unchecked "Download weather automatically" then i checked it again,hit the "Back" button got a messenge from hy HTC telling me something about the weather and all was fine after that.You can try it and see if it works
Cheers

TouchFlo 2D Problem

Yesterday i downloaded a Manilla 2D in .cab file. I copied to my phone, install and i have on my screen "Tap here to launch TouchFLO", i take it but it dont work. Can anyone tell me wtf? Plz help

Gonna need a little more info than that, chief.
For instance:
Are you running WM5, or WM6?
Which release of M2D did you try to install?
Do you have HTC Home installed?
Did you RTFA?
...and lastly, try posting your problem in the thread for that application, not in a board three clicks away from it, where the guy that cooked it might never see your questions.

Fazi93 said:
Yesterday i downloaded a Manilla 2D in .cab file. I copied to my phone, install and i have on my screen "Tap here to launch TouchFLO", i take it but it dont work. Can anyone tell me wtf? Plz help
Click to expand...
Click to collapse
Dude which version of touchflo 2D did you download ? Downloading a single cab install for the Wizard is crazy. Download the 18 Release and make sure you install the Shared DLL's and the HTC Patch for older devices BEFORE installing the manilla cab. The easier alternative is to backup your device and flash a Manilla 2D rom found in the Wizard Mobile 6 Forum

unable to launch touchflo 2d
Hi guys, im using a HTC touch 3G running on windows mobile 6 if im not wrong. My touchflo juz stopped working and "tap here to launch touchflo" juz pops up. But even after i tapped it wont work. I have not installed any programs prior to this problem it juz struck me outta the blue. Any idea how can i resolve this? THANKS!

icopral said:
Hi guys, im using a HTC touch 3G running on windows mobile 6 if im not wrong. My touchflo juz stopped working and "tap here to launch touchflo" juz pops up. But even after i tapped it wont work. I have not installed any programs prior to this problem it juz struck me outta the blue. Any idea how can i resolve this? THANKS!
Click to expand...
Click to collapse
Are you ABSOLUTELY sure you didn't change M2D panel settings, turn on a new panel, or otherwise run a program like M2DC that would create registry entry changes? Did you accidentally enable something other than Manila in the Today settings? Also, check to see if you have enough free memory to actually run it. Lots of people miss the fact that you need to clear out temp files occasionally, and WM5/6 does a terrible job of it. Use ClearTemp if you appear to be running out of memory. Also, make sure that programs you open are actually getting closed. Filling up RAM with running programs (especially those that run on startup, like battery minders, lock programs, script programs, etc.) could also prevent M2D from running.

Where are the programs?

Hi guys,
Ive downloaded Touch-ITs very good touch flo and so started to download other programs. So far ive done the keyboard and that works a treat.
Problem is ive downloaded the mp3 trimmer and social network engine installed them but cant find them anywhere...how do i access them? can these be used as tabs on the touchflo screen as i really like the interface?

x1fan said:
Hi guys,
Ive downloaded Touch-ITs very good touch flo and so started to download other programs. So far ive done the keyboard and that works a treat.
Problem is ive downloaded the mp3 trimmer and social network engine installed them but cant find them anywhere...how do i access them? can these be used as tabs on the touchflo screen as i really like the interface?
Click to expand...
Click to collapse
mp3trimmer already comes WITH itje's rom. no need to install it again. which "social network engine" are you talking about?
you'll find all programs if you click "start" (upper left) and then "all programs" (lower left).

I used this thread http://forum.xda-developers.com/showthread.php?t=442154 to get the cabs and installed them. Cant find the option to trim MP3s at all. and i downloaded the Touch-It Blackstone Social Network engine. Any ideas?
Im hoping that by downloading the engine that the social networking sites would pop up under the internet tab where youtube is...you know where i mean?

oh, my mistake. you installed the cab and not his rom with manila cooked in...
okay, i'm sorry, but i never used stock rom with manila-cab. but i can tell you this:
- manila works best if cooked in, use a custom rom (i.e. itje's touch-it v.10. but there are many good roms, have a look in the rom-developing-part)
- the cab you used is from november 2008, there's a newer version out now
- "social engine": never saw it in the internet tab, it connects your contacts with a corresponding facebook-friend.
so, bottom line:
programs should show where i told you above, even in the cab i think. and: manila as a cab is slow, cooked-in it flies these days.

caliban2 said:
oh, my mistake. you installed the cab and not his rom with manila cooked in...
okay, i'm sorry, but i never used stock rom with manila-cab. but i can tell you this:
- manila works best if cooked in, use a custom rom (i.e. itje's touch-it v.10. but there are many good roms, have a look in the rom-developing-part)
- the cab you used is from november 2008, there's a newer version out now
- "social engine": never saw it in the internet tab, it connects your contacts with a corresponding facebook-friend.
so, bottom line:
programs should show where i told you above, even in the cab i think. and: manila as a cab is slow, cooked-in it flies these days.
Click to expand...
Click to collapse
I am LOST, however up for installing whatever makes it run that little bit smoother! I like the look of manila i am using now but if there is an upto date one then i can give that a go.
I havent found the ROM you suggested but will keep looking, the first thread i came across (the main one) seems to have the download links removed, any ideas?
Thanks so far mate, youve been a star

Ahhhh think i have found the ROM now just waiting for the file to download now for the installation...

Trying to enter bootlegger mode and all im getting is the coloured screen, try to connect to PC but doesnt do anything, just stuck on coloured screen.....

x1fan said:
Trying to enter bootlegger mode and all im getting is the coloured screen, try to connect to PC but doesnt do anything, just stuck on coloured screen.....
Click to expand...
Click to collapse
typing this from my mobile, so to keep it short:
- you need to apply "hard-spl" first to flash a custom rom (it's a sticky)
- if you're flashing itje's v.10.2, be aware that there is a bug for some people with sending sms. i NEVER had it though. also you'll need to apply 2 or 3 fixes.
- READ READ READ!
if you're going to flash ANY custom rom you'll have to learn a lot. "just install and everything's perfect" won't work. and everytime you flash a new rom you'll loose all data on your phone, so make backup first!!!
if you're willing to get into this - do it. it's worth it and it will really improve your x1. if you want to have everything working out of the box with many restrictions - apple makes such a device...

Ill let you know how i get on, im just loading 10.2 now so we shall see

x1fan said:
Ill let you know how i get on, im just loading 10.2 now so we shall see
Click to expand...
Click to collapse
have fun then.
hope you did a backup of your data - if not, don't come yelling if it's all gone...
edit: the fixes needed
since the thread on v10 is pretty much to read (it started as v7...), for starters the 3 fixes needed with this version.
- Advanced Network (found in itje's first post, under the dl-link for the rom itself)
- "v10.2_corrected_highlights.zip" (also posted by itje, somewhere in the thread, search for it)
extract the files in these two zips to your \windows-directory (on your x1) with total commander (comes with the rom)
- v10.2_smaberg_1_percent_battery.cab (install normally. this fixes a bug that the battery-meter always shows 100% full. alternatively you could install another icon-set from this forum. watch out if they're for WinMob 6.1 or 6.5 though!)
the cooked-in build of opera mobile 9.5 doesn't work with the hardware-keyboard of xperia. either install build 16194 (iit's from an official x1-rom) or try opera mobile 9.7 beta.
every other question you should ask in the thread of the rom you've chosen.
this should set you up, from here on it's all tweaking, lots of reading, learning and adding apps to your likeness.

i have a problem like this one: i installed the touch it manila cab and then i installed the touch it htc album but... i cannot find the program... what do i have to do?
EDIT: ok i found two exe files in the windows folder wich are : HTCAlbum.exe and AlbumSearch.exe, and when i run each of them i have HTC Album... btw the problem is that i have no text in the menus... what may be the problem?

Thanks for all the advice guys...im installed and up and running and so far so good, no issues at all, the sms seems to be working fine etc.
Ill apply the fixes as noted so far as and when i come across the issues!
Cheers again all

caliban2 said:
- v10.2_smaberg_1_percent_battery.cab (install normally. this fixes a bug that the battery-meter always shows 100% full. alternatively you could install another icon-set from this forum. watch out if they're for WinMob 6.1 or 6.5 though!)
Click to expand...
Click to collapse
I cant find this CAB

jup, sometimes the search function takes getting used to... here you go.

caliban2 said:
jup, sometimes the search function takes getting used to... here you go.
Click to expand...
Click to collapse
Mate i looked everywhere, searched forums and then even threads but couldnt locate the cab, im slowly getting used to the site and where to find things so hopefully wont be pestering too much soon
Thanks again

-=W1S3=- said:
i have a problem like this one: i installed the touch it manila cab and then i installed the touch it htc album but... i cannot find the program... what do i have to do?
EDIT: ok i found two exe files in the windows folder wich are : HTCAlbum.exe and AlbumSearch.exe, and when i run each of them i have HTC Album... btw the problem is that i have no text in the menus... what may be the problem?
Click to expand...
Click to collapse
still nothing for my missing menus text problem?

HTC Sense and WM Today

Can both HTC Sense and WM Today pages coexist similar to the way SPB Shell works by have the Today page in the background?

There was a program called "TouchFlo Detacher" that I used on my Touch HD. Now I know this won't work with Sense, as it's designed to work with TouchFlo, but I'd imagine that it would be a simple change to put in the relevant class names for the Sense UI.
It replaced one of your softkeys with a toggle button so you could flip between TouchFlo and Today, and it was VERY fast! (It didn't close and later re-open TouchFlo - it simply hides it as Today is always in the background.)
Have a search for TouchFlo Detacher and ask the author if he'd be interested. He may ask you to beta test it for him
Edit:
Here you go - I found it for you...
http://forum.xda-developers.com/showthread.php?t=480475

Thanks Great starting point
Thanks Great starting point

SDBArbifox said:
Thanks Great starting point
Click to expand...
Click to collapse
You're welcome mate

Check this out
http://pocketnow.com/tweaks-hacks/ui-switcher-now-supports-sense-mobile-shell-titanium-more
4-in-1 switcher: TF3D/Sense, Mobile Shell, Titanium, Today screen
Looks good... "we discovered a very useful tool for switching between HTC Sense/TouchFLO 3D and Mobile Shell 3.5.x with a single tap of a shortcut"
Hope it works for u

bshakil said:
Check this out
http://pocketnow.com/tweaks-hacks/ui-switcher-now-supports-sense-mobile-shell-titanium-more
4-in-1 switcher: TF3D/Sense, Mobile Shell, Titanium, Today screen
Looks good... "we discovered a very useful tool for switching between HTC Sense/TouchFLO 3D and Mobile Shell 3.5.x with a single tap of a shortcut"
Hope it works for u
Click to expand...
Click to collapse
Looks good, but I personally don't like MortScript, so would rather a windows app, like the above-mentioned one.

I just recently installed M2D on my LG Incite and installed the communcations cab thing and got it to work but, after I had to hard reset and now I cannot figure out how to get the communcations tab to start working again. I dowloaded it onto my phone and just can find the icon under programs where it was before. Any help? Thanks!
*aww my first post! Look at how ignorent I was back then lol.

froggylover1345 said:
I just recently installed M2D on my LG Incite and installed the communcations cab thing and got it to work but, after I had to hard reset and now I cannot figure out how to get the communcations tab to start working again. I dowloaded it onto my phone and just can find the icon under programs where it was before. Any help? Thanks!
Click to expand...
Click to collapse
You shouldn't hijack threads.
I suggest you try one of the following...
http://forum.xda-developers.com/showthread.php?t=499578
http://www.lg-incite.com/
or keep googling

I am apologize but i cannot find an answer anywhere! I have tried googling for hours now and ive already seen that post. Thanks.

PurpleLlamaLover said:
I am apologize but i cannot find an answer anywhere! I have tried googling for hours now and ive already seen that post. Thanks.
Click to expand...
Click to collapse
Pretty sure you've figured it out by now eh?