Hi there,
i have problem with screen alignment after I dismanteled my trinity and cleaned it because it was all dusty.
After putting everything together my screen was not aligned. I tried to align but it just kept asking me to align forever.
I did dismateled it again and put together, flashed rom again but it is the same...
Anybody having any idea ? please...
New digitizer ...
it seams that only solution is new digitizer..
so I ma waiting for it, hope it comes fast...
Hello,
I broke my screen (only digitizer) and bought an replacement. After replacement i could not align my screen. When i touch the first cross, nothing happens. i had to soft reset the phone to bypass the alignment. The screen 'works' that means that it responds to touch, only is misaligned.
What is your experience with the new digitizer?
Arjan
Fixed the alignment problem. FtouchFlo was interfering with the screen alignment. After stopping FtouchFlo i could align it just fine. Screen is working with the new digitiser
Related
HI Guys
Recently I found that after extensive using the screen with stylus, screen alignment goes for a toss, When trying to do the screen alignemen again, after tapping centre and the for corners, alignemnt doens;'t happen and again the same screen appears....
Infact my screen is not at all damaged..
Does any one have idea if this is a bug in ROM or some other issue which is addressed ?
Currently my ROM is 1.13WWE and Radio 1.12 (PM10A)
Hi..
I bought a Vodafone V1605 ( HTC Tytn ) from ebay... the auction description indicated some alignment problems that could be resolved by screen re-alignment...
But when i got the package i found that the problem is worse than that... as you can see in the picture ( http://img81.imageshack.us/img81/4319/tytnscreenul8.jpg ) the top-right of the screen seems to be with problems.... I tries to draw several horizontal lines... and in the top-right part of the screen i got some waves...
I'm thinking about returning the phone... but can this be resolved by purchasing a new touch-screen ? I've seen that buying a replacing touch-screen is not very expensive....
Best regards,
A new touch screen might help. What also is a known issue is the screws at the back of the screen. Try to tighten these it helped for some guys allready.
I replaced my touch screen after i cracked it and now i can't get it to align at all.
I click anywhere on the screen and it thinks it's a click in the top left of the screen as the start menu opens up.
Haven't been able to find anyone to answer my posts for help either.
If there is dirt on the edges of the screen (between screen and cover) it can cause alignment problems as well. I had to recalibrate mine several times a day at some point as dirt would move and press different locations, biasing the digitizer. I got tired of it, dismantled the phone, took the LCD out, cleaned it as well as the inside of the case, and put it back together. No more issues so far.
kilrah said:
If there is dirt on the edges of the screen (between screen and cover) it can cause alignment problems as well. I had to recalibrate mine several times a day at some point as dirt would move and press different locations, biasing the digitizer. I got tired of it, dismantled the phone, took the LCD out, cleaned it as well as the inside of the case, and put it back together. No more issues so far.
Click to expand...
Click to collapse
Had exactly the same problem (and solution) for the screen alignment problem of my Xperia X1. I removed a tiny plastic piece (most likely a leftover from production process) which stuck between the metal frame and the touch screen. After that I could easily align the touch screen and have no alignment problems anymore.
Be careful to not break the screen - I used a thin sewing needle and tweezers to remove the plastic piece.
I just replaced my digitizer today (bought the handset from ebay - faulty touch screen). After replacing my digitizer, my touch screen still doesnt work, even after hard reset - when asking to 'tap screen to set up device' it wont respond to any taps.
Any ideas ?
Same here. Digitizer replaced but touch screen still not responding. Im afraid that problem is in motherboard
Any one any sugestion?? Phone is not under waranty any more.
Hi everyone! im new to the forum So Ello everyone))) I,v had my wizard fr a month now and it was fine untill screen alignment become bad so i press on button and button next to it opened. Because of this i have clicked on Screen Align to align the screen but it started to loop (( dont know why because touch screen it self works perfectly. So what i supposed to do to align my screen? im using my phone by keyboard now because i just cant press any button on screen because it needs alignment. THX to anyone who has read this.
The wizard doesn't like being kept in a pants pocket. If you press with your finger firmly, running it all around the edge of the screen, that might cure the temporary insanity. Otherwise, set it aside (not in your pocket) for several minutes and try again. I got a leather belt case for mine to cure this issue.
If I'm guessing right, the first problem was that the touchscreen seemed to be very weird, so you tried to re-align it, and it always fails.
noup the problem was that i have bought the phone about 3 weeks ago it was working but when i tried screen alignment it just started to loop. I pressed it about 50 times(them 5 crosses) i dont know what to do (( because screen alignment now is crap (to exit screen alignment i need to get off battery and put it back)
After a busted screen I replaced the LCD and Digitizer. After that I didn't make any changes to the software (ROM, nor settings) of the HTC.
LCD works fine, but my screen alignment is bad. On almost all items I have to thick on one item beneath it to get it, also some items are not reachable due to this problem.
I managed to start the alignment proces with the use of the Remote Alignment tool, alle goes well but the upper two crosses. The digitizer simply doesn't respond to these and after al while starts over again.
Is it normal that you have to align your screen after a digitizer replacement?
Will it help to hard reset my HTC? (I'm using a hacked ROM, last one from Dutty WM6.5, so it doesn't start automatically with the alignmentproces)
When the upper crosses don't respond in the alignment proces, does this mean the Digitizer isn't ok?
I found a thread about Remote Screen Alignment on this board (/showthread.php?t=355010). Will this help for me? The phone is almost unusable so installing / using PHM Registry Editor will be almost impossible.
Lot of questions, hoping for some answers
Almost 2 days, 69 views and no answer?
Please guys, I'm missing my beloved HD