Hi,
I have XV6700 phone and been using "cooked" ROMs for some time. Everything is working just fine, however just recently I noticed strange problem with my LCD.
It seems that the very bottom line of the picture is displayed all the way on top. It's like whole picture is rolled down by a pixel.
I was trying to find some solution on the internet, however I found nothing. I've just replaced the LCD screen (I broke previous one), however I had the same problem with my previous screen. I don't remember if I had this problem with original Apache ROM.
My current ROM is CE OS 5.2.20924 (Build 20924.1.5.0).
Does anybody notice similar problem and know how to adjust position on that LCD?
Thanks in advance,
Jacek
Related
I have problem with my camera after changing whole Main Board in Service. Unfortunately I didn't tested camera with orignal ROM so I don't know if it's HW problem or WM6 problem.
Picture is broken to (mainly) green boxes (see attachments). It already happend with my previous MB and WM6 ROM, but problem disappeared without any intervent from outside. Any Idea what it is and what to do?
I got the same Problem
I got the same problem still trying to find a fix.. flashed my rom a few times and still no change ruuning schap's 4.00 wm6.
Hope to find a solution..
It looks like a software fault but how or were can one find a fix..
I got the same but before it was working fine :s could be because i dropped it a few times to many? not sure though works fine on black satin but now i got the the green blocks to
That does not look like anything to do with the ROM or indeed any software setting. I'd say that's a hardware matter - BUT hopefully just the connection between camera and m/board. If you have no guarantee/warranty then I suggest removal of and refitting the camera.
You'll need to remove the scroll wheel assembly first.
Scroll wheel assembly removed exposing the camera multi-connector. (This connection is the problem I think).
Make sure this connector is flat and firmly inserted.
Mike
This happens to me occasionally. normally when the battery is low.
Though it did happen for a little while after my phone decided it needed to go play in a puddle last christmas. Once it dried out it was fine
i got this when i dropped my handset at first after i dropped this. with with a bit of brute force and a few dropps after it works fine again
Like the above post saying it it nothing to do with the rom or any software it is the connection between the camera and motherboard
Hello guys ... never thought i`d post a problem thread but here i am.
Here is the situation: sometimes the screen graduately fades to black&white vertical lines. It happens 90% of the time i use the volume key in Today screen, sometimes it happens sudently when i`m navigating windows menus (Programs, Settings), and oftenly in iGo (2006). Problem doesn't ocur when the keyboard is out.
I have searched but nobody seems to have this problem.
P.S. Attached a zip with a short movie of what exactly happens, maybe someone has a solution.
I thought a OS upgrade would solve the problem, but it didn`t (i recently upgraded to TNT WM 6.1). Could it be my wizard is a G4 and i used soft spl to upgrade? (didn't install a original rom before upgrade)
I have a different screen problem. My touch screen does not recognize when I do try to use touch selection using my finger or stylus. Anyone with any suggestions?
I`ve found a thread on the HTC Hermes forum:
http://forum.xda-developers.com/showthread.php?t=321163
It seems to be a loose display connector, or not sufficient pressure on it. Hope i`ll get the time to disassemble the wizard to see if i can fix the darn think.
Nobody else with this problem, or other solutions?
Yep, same problem, found the same solution
http://forum.xda-developers.com/showthread.php?t=303872
too scared to fix it
I took the darn thing apart a couple of months ago, and noticed that the problem is with the display cable ... when the slide is closed, the cable is bent (at 180 deg), and probably the cable wires have thinned. (the problem never appeares with the slide open.
Didn`t think of a way to fix that darn bend, so i`m back at square one. Did notice though that the fadeing seems to be in direct connection with the backlight setting.
I have had the same problem as the first post and now I've got the problem of the second, any ideas?
Try flashing the 2.19er Radiorom, that solved this problem for me.
OK I have had my T-mobile Wing aka HTC Herald since last April.
Just a few days ago I encountered a problem with my lcd. And I would like your guys feedback if possible before I purchase an lcd replacement.
My problem is when I slide open the wing my screen starts to fade, (almost making it look like a negative from a picture) after that it starts to fade to different colors.
Now the problem persists when the phone is closed, however if I tap the top of my wing and hold it the screen becomes normal, but once I let go it starts to fade again.
I would like to know if any of you experienced this with ur phone and if a replacement lcd screen will fix the problem or am I sol?
If it helps im running my wing on Open Touch v6.0 WM 6.1 Build 20273.1.3.3
Thanks in advance.
LCD problems
Hello,
I too have some weird LCD problems and instead of creating a new thread I thought of posting in this one.
For the past few months, whenever I get a call or resume my phone from standby mode using the power button the entire screen goes white or sometimes it has green or blue colored lines all over them. I have to keep on pressing the power button few times to get proper display. Also whenever I open the qwerty keyboard the display goes blank. Since I am out of warranty Tmobile is not ready to replace the phone and I contacted the HTC customer service and they told that the display unit and some hardware stuff is gone and it needs to be replaced and will cost a minimum of 170$ and will increase if they had to replace some other hardware.
Please note that, my screen is NOT broken and the touch screen too works fine. Recently the display has gone completely blank or too faded even to see whats there in the screen I could barely see the today screen.
I searched and I did not find any similar issues that other folks have faced. Since the LCD and the touch screen is not broken replacing them is not going to fix the issue, correct? I was using open touch and recently I updated the latest official Tmobile release of ROM 6.26.xxx. I also tried the hard resets too.
Any other ideas/suggestions will be of great help for me. Thanks in advance.
I am having some similar problems as well, but my problem is much more severe. My screen is completely black and it just happened this past weekend. When i slide the phone the screen used to flicker but now it black as well. Phone works fine but is useless due to the fact the the screen is out. I remember seeing a program where you can interact with your phone via your pc when something was wrong w/ your screen (cracked, broken, etc.) I have searched the forum but to no avail. The program was very simple and effective. I plan on replacing my phone but would like to retrieve some info off the one I have. I just need that program! Anyone please HELP US!
handsome22 said:
I am having some similar problems as well, but my problem is much more severe. My screen is completely black and it just happened this past weekend. When i slide the phone the screen used to flicker but now it black as well. Phone works fine but is useless due to the fact the the screen is out. I remember seeing a program where you can interact with your phone via your pc when something was wrong w/ your screen (cracked, broken, etc.) I have searched the forum but to no avail. The program was very simple and effective. I plan on replacing my phone but would like to retrieve some info off the one I have. I just need that program! Anyone please HELP US!
Click to expand...
Click to collapse
link to the thread containing some info about the software... its called my mobiler
thanks for the info
Hi everybody,
I recently received a Qtek 9100 from a friend, but I'm having some issues with it.
Firstly, it has Windows Mobile 6.5 installed and I'd like to revert to the OEM version, 5.0, hoping for it to be less buggy, but I could not find a decent method. Could anyone advise, please?
Secondly, I'm having some issues with the display. At first I suspected a hardware issue, now I'm not that sure about it.
So,... after freezing (as WM6.5 seems to have this function really well implemented), I reset the device and instead of the boot screen I got a flickering light screen with all sorts of horizontal and vertical lines. I checked with eBay, found a new screen at a decent price and just as I was about to order the new screen, the display started working again, until last night when a soft reset sent it back where we started from, meaning all sorts of lines.
Now I'm thinking it's either a hardware issue such as a bad contact, or the lines are caused by the damn WM6.5. I'm leaning towards the hardware problem, since the boot loader doesn't show properly either.
Any advices would be greatly appreciated. Thanks in advance
It can be Omap overclocking. Try to look at the wiki for a original rom for your phone
it's hard to say what rom it had since i got it with wm6.5.
i found a link on this forum to a file called RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_cingular.rar
it seems to be one of the many originals, so i'll try to flash this one as soon as i can figure out the connection issue with ActiveSync. I tried both 4.0 and 4.5 but they both fail to connect i need to fix the pda's display (or wait until it solves itself, like the previous time) in order to troubleshoot the connection error
Can you get into bootloader?
no, i keep getting those flickering horizontal and vertical lines. the odd piece is that anything else besides the connection seems to work. my guess is that the active sync connection can be solved via connection manager, but since i cannot see a damn thing... it's gonna be complicated.
my best guess is to buy a new display from ebay since i found some real cheap ones ($9) and replace it, hoping this would solve the hardware issue.
is there anybody else who got those mad lines? perhaps there's a less complicated solution to this problem that you would like to share
apparently, this is not a common issue, good to know
nobody had horizontal and vertical flickering lines?
I have HD2 since 2 months ago and it worked perfectly till a few days ago when the screen appears with some strange colors, not the normal ones. The touch screen works perfectly and the phone works ok. It's just that the colours are different from the original ones. Then after a few minutes or so it comes back to normal.
Any idea?
Thanks for your help.
did it fell off the ground before ?
nope, never felt down
any idea?
maybe your LCD flexband/cable is not tight fit in the slot..under the lcd-glass
had that before with sony cellphone
i would take it to service if you dont want to loose warranty.
picture of flexband:
http://www.pda-square.de/images/product_images/info_images/4297_0.jpg
Last year I had same problem happen to my laptop.
vorza said:
I have HD2 since 2 months ago and it worked perfectly till a few days ago when the screen appears with some strange colors, not the normal ones. The touch screen works perfectly and the phone works ok. It's just that the colours are different from the original ones. Then after a few minutes or so it comes back to normal.
Any idea?
Thanks for your help.
Click to expand...
Click to collapse
yes, I a agree powerslave69
After receiving back my Laptop from repair's (manufacture). A week later your problem came about. It was discovered by manufacture on return that the 'Wire Tape' connection was lose at one end between graphics card and screen. So when the Laptop was first repaired it was overlooked that the connection not right when the manufacture put it back together.
Best to send It back right now and they should replace it with a new one
Problem gone !!
Had the same (I think) problem. The colours on the screen went "blurry" & lost it's sharpness. Took it to service and they just re-flashed it with the newest ROM. Don't think that's the right solution to the problem though...
i already tried to flash it with the newst rom available on htc web site but it didn't work.
I brought the phone to the service. I'll let you know.
Thank you.
just curious, did you happen to have a custom rom with 576MB of ram enabled?
see this thread h t t p : / / forum.xda-developers.com/showthread.php?t=677979
no, it's the original rom. never applied a custom rom
Did you get this sorted out?
I think im having the same problem, since about a week ago i get horizontal bands of discolouration across the screen, at first it seemed to only affect Sense, but now any program running shows these bands of colour (like a purple colour band across the screen). Sometimes it is fine but now seems to be mostly like this.
Still on the original ROM...
richo27 said:
Did you get this sorted out?
I think im having the same problem, since about a week ago i get horizontal bands of discolouration across the screen, at first it seemed to only affect Sense, but now any program running shows these bands of colour (like a purple colour band across the screen). Sometimes it is fine but now seems to be mostly like this.
Still on the original ROM...
Click to expand...
Click to collapse
i have the same bands descoloration, the green tends to blue, i have to yellow bands, and text caracters in black screen comes yellow.
i was with Android froyo in miri ROM V17, i flash a few times the same miri v17 and radio 5.12.....
the problem is that I'm in hollidays for a month, and just have those rom and radio, that i flash via storage card.....because I'm with a macbook without WIndows switcher.
i thought goes to a cibercafe to try another rom.
What did you thing it is? what could i do?
please have merce, and help me.
i just have a few megabits in my plan data, to search a solution.
thanks by advance
No need more help, i have solve the screen issue.
so what was the solution?
Mine is ok now, went away by itself, but the problem pops up every now and then.
richo27 said:
so what was the solution?
Mine is ok now, went away by itself, but the problem pops up every now and then.
Click to expand...
Click to collapse
dont solve anythink, the issues continue....like yours...sometimes less sometimes mucher.
Has anyone sorted out this issue ?? Cos now mine is having the same problems...
I have checked around on other forums and no one seems to have the problem.
oh, and my HD2 is out of warranty, so I hope it won't cost a fortune if ihave to get it fixed....
Sorry for digging up an old thread but:
another one with strange colors over here. White is whit, black is black, but green, red and blue look a lot "paler". The colors are much less vibrant then they used to be.
The backlight of my hardware powerkey stopped working a thesame time. Other hardware buttons are fine...
question is.. will this get fixed under warranty? Anyone had thesame issue and sent his phone out to be repaired?
same problem now and then...someone help
if i apply a little preassure near the bessels or the usb port...screen becomes normal but you can never say when the problem might appear again...help !
backlashsid said:
same problem now and then...someone help
if i apply a little preassure near the bessels or the usb port...screen becomes normal but you can never say when the problem might appear again...help !
Click to expand...
Click to collapse
Seems like a loose contact on display ribbon cable. It happens after caring the phone long time in pockets usually in the summer when it's hot and sweat can enter in the phone. Contacts don't like moisture, in special sweat, it's corrosive. In addition, when caried in back pockets it will be slightly deformed and it is the second cause of that failure.
Strange colors on HD2 screen
I had a similar problem a while ago, horizontal green/yellow bands across the screen. At first it was intermittent but then became permanent. I had to send it back to HTC for a fix.