hi
when i install a theme using tf3d config it does not install properly, the it say memory low message , that always comes up , i have got enough memory on my phone and still that message comes up.
also it does not install correctly because nothing comes up on home screen
help would be appreciated
thank you
bump
anyone help please
Related
hi, thx for ur help in advance.
everything started after i overclocked me wizard and tried to instal skype for low cpu. the clock in TCMPM showed 240 so i thought it is gonna be enaugh but unfortunetly i could instal it. it just frezzes on the instalation screen and thats it...by the way wizard dyspalyed info that phone is running on low memory so i removed some apps but didnt help. after using memory clear utility i did a hard reset. but right now i cannot instal anything. every time i download *.cab file to my phone and i save it to my storage card and try to instal it just dosnt work. what is the problem can someone sort this out ?? any advice !!!
cheers, matt
Hi,
I have a cingular 8525 with the default cingular ROM ( will change it later want to wait a litle while)
I am trying to install a Cab and i get this notification:
the installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions
I know this is a simple registry hack and i seen a couple but I have not seen anything specific to hermes.
Please give me a link to directions
Thank You
Here... Install this CAB to the phone
This did not help
I installed the Remove Security Cab and it installed with no problem, but when i try to install: CommButton-Toggle-Vibrate-Fix.CAB
I still get the same notification.
Thanks
Did more searching still cant solve it
I read some more posts and found that making sure processes are not running might solve the problem.
I went to memory and stoped all programs and I sitll can't install the: CommButton-Toggle-Vibrate-Fix.CAB
Are there like system processes which are not showing up in memory - running programs ? Maybe I need to get into those and stop them?
Any other sugestions?
Please point me into the right direction.
Thank You
medmenz said:
I read some more posts and found that making sure processes are not running might solve the problem.
I went to memory and stoped all programs and I sitll can't install the: CommButton-Toggle-Vibrate-Fix.CAB
Are there like system processes which are not showing up in memory - running programs ? Maybe I need to get into those and stop them?
Any other sugestions?
Please point me into the right direction.
Thank You
Click to expand...
Click to collapse
Purely on the point of running processes - these will not show up in programmes in memory (except in very broad terms). An application such as sktools will show running processes.
(I am not saying this will solve your problem though)
Mike
ok i will try getting a prog and stoping more stuff to see if i can install?
Any other sugestions?
Tried using SKtools to stop everyhing possible still cant install the CommButton-Toggle-Vibrate-Fix.CAB
Is there anyone out there that knows how to fix this problem???
Please Help
thanks
Is there a way maybe to instead of installing this cab file to do it manualy??
Can I somehow modify registry to do the same as this cab is doing?
thanks
As a general rule, if I have an "unstoppable" process, I power cycle the phone and then execute the cab without opening ANYTHING else (like the comm manager in this case). Give it a shot.
I just tried that turning it off and on and trying to install, also doing soft reset and trying to install. Nothing works as soon as I click on it in a second i get "Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions."
Please tell me what else I can try??
Finaly got what I wanted
I never got the stupid cab to install, but I found a different cab which let you assign vibrate to anything ( http://www.8525software.com/)utilities so when i hold PTT button it switches to Vibrate
Thanks for all that tried to help me.
Hi all!
You sure notice that the diamond normally lock the screen after very short time while performing phone call!
please let me know how can i dismiss or reduce that operation
b.t.w
I can not record phone call with the diamond becouse every time the diamond lock during phone call the voice recording application stop working and cut the call recording when the diamond lock it self!!!
thanks!!!
you could have searched. but your new so ill be nice. welcome to xda-dev and here is what you need!
Thanks but I installed that file and didnt see any progra that I can execute, where is the executable file of the program and how can I use it?
Thanks again!
Genesis 44:12
Folks!!!!
I can not see where is the executable of that installed file!!!
please please please tell me EXACTLY how to find it
THANKS!!
alon111 said:
Folks!!!!
I can not see where is the executable of that installed file!!!
please please please tell me EXACTLY how to find it
THANKS!!
Click to expand...
Click to collapse
there's no executable, the cab probably adjusted some registry settings.
check and see (after a soft reboot) if it works when making a call...
works fine,thanks
How can I remove that application / registry if i want?
Unsuccessful Installation of NoSleep!!.cab
Why i cant install ? Easily getting message Installation of NoSleep!!.cab was unsuccessful ... Any suggestions ????
Same here
Hi all, I've got my jewel for 2 days so... thanks very much for your utstanding work.
I have the same question: It works ok, but if I need to unistall it how can I do it.
Thanks in advance for your help.
hey everyone i just wanna first say that I have gotten a new phone called Touch pro 2. I really want to add themes but i cannot. I downloaded the TF3D CONFIG also and no luck. Everytime i download a theme i dont know where it goes. It would be sooooo thankful and I would be really happy to recieve some help. Sorry I have real bad ocd and I stayed up all night trying to figure it out. Please help me.
kangmuha said:
hey everyone i just wanna first say that I have gotten a new phone called Touch pro 2. I really want to add themes but i cannot. I downloaded the TF3D CONFIG also and no luck. Everytime i download a theme i dont know where it goes. It would be sooooo thankful and I would be really happy to recieve some help. Sorry I have real bad ocd and I stayed up all night trying to figure it out. Please help me.
Click to expand...
Click to collapse
You just download the Theme cab file to your device which will save to your My Documents folder or your Storage Card. Disable TouchFlo3d or Sense by going from the Start menu to Settings/Personal Tab/Today and uncheck it and click OK. Then using File Explorer find the cab you downloaded and click on it to install. Select install to device. Then soft reset(reboot) and re-enable TouchFlo3d/Sense.
hi friends
I am using htc p3400i since last year nowadays from somewhere i got the wing linux option to convert the same system to android but after some process i got the massage on the screen " TSLIB calibration utilities" " touch the crosshair on the screen" but after that i am not able to touch the cross hair so at the last stage i couln't get the proccess finished so if anyone have the solution than do guide me.
thanks in advance
Are you sure that you have installed wing-linux-0.4.2-gene.cab?
yep dear
i am installing the same if you have converted the same into android than plz let me know how is it working and guide me for the procedure
thanks in advance
pranavjoc said:
yep dear
i am installing the same if you have converted the same into android than plz let me know how is it working and guide me for the procedure
thanks in advance
Click to expand...
Click to collapse
first make sure that you have atleast 650MB free space on SD card.Then install wing-linux-XXX-rootfs.cab on SD Card.It will take sometime then install wing-linux-XXX-GENE.cab on SD Card.During installation dont get your backlight turned off bcoz sometimes i have seen that it corrupts installation.Now run Winglinux from start menu.There is run button and default.txt simply press run button and wait.Then it will ask to allocate disk space dont do anything and wait.wait.....Then angstrom screen will appear.again WAIT.And finally there is touch screen calibrate screen and LoL it is working.
I don't know that why you can't touch crosshair.
Any way try again.Good luck for it.But Android is still not usable on GENE:-(
There is no sound and sometimes no network.For more go to http://wing-linux.sourceforge.net/trac/wiki/HTCGene.Do it for your Fun.
Have a nice day.