cant connect with pc - P3300, MDA Compact III upgrading etc.

evertime i plug my device in my pc comes up with unknown device
how can i flash a new rom if my pc cant see the orbit? cant use active sync either

What's your operating system?

o2 version of windows mobile 6
i read breifly about a dll but i cant find it on the site or cant remember where i read about it
its basically like the orbit is not sending the driver information to the pc, yet the it still charges the orbit when plugged in

Try connecting the Orbit to another PC, or at least to another USB port on your PC. And don't use USB hubs, plug the device directly into PC's USB.

Related

O2 Atom drivers

I do not have a Companion CD for my O2 Atom - can anyone help me where can I download all the drivers?
What kind of drive? you just need ActiveSync
I instaled activesync 4.1 but I can not get it connected with my Atom. I tried USB cable and bluetooth. It always comes up with message "Your device was not detected". Could anyone make a copy of Companion CD and upload it here on the ftp? Thank you.
Something is wrong wiht your USB (cable, port or device). Try to connect another device (pendrive for exemple). You just need Activesync.
U were rite, there was sometthing wrong with my USB hub, though other devices were working with it. Anyway myAtom is now connected thru ActiveSync. Thanx.

Help!!!! windows can't recognize the device

HELP!
I'm a new to PPC. I've got an O2 mini, I charged the device well just now, but now when I connect the device to my computer, always says that the USB device is not operating well and windows can't recognize the device. Is there anyone could let show me what's wrong? what should I do? Thanks!!!!!
Hello,
Are you sure you have installed Active sync in your Desktop?
Regards
Carty..
Is your USB cable plugged into a front USB port on your computer??
If so, try plugging it into the back. Some front USB ports do not have enough power to recognize the MDA Compact, and you get that same "USB not recognized" error. Most back USB ports are powerful enough.
uninstall activesync ... reboot system install again ! should work
the comupter may of just seen the modem side of it it happened to me you need to go into your hardware file on your pc and delete any modems you don't recogonize (carefull you don't delete the wrong one (i exepct no responsibility if you do)) and then re install active sync v 4.1 fom microsoft site. then plug it in again good luck
Thanks all you guys. I have got this problem resolved. There is sth wrong with my cable and I have bought a new one. Noe everything is going well.

qtek s200 device driver for windows

am a newbie i just bought a qtek s200 but i didnt find its CDrom included and everytime i connect it to my Pc it asks for the device driver....where can i download the drivers from ?
You should download ActiveSync from Microsoft.com, install it, then plug in your phone. Windows will then automatically install the necessary drivers.
Good luck.
I had the same problem with a normal USB cable.
I lost my cable and the sync does not work with a normal cable ??
Do you have a origional cable ?
it worked thank you
HTC USB Modem driver
ActiveSysnc software is useless, when you need to use your phone as GSM(GPRS) modem via USB connection! I couldn't find out "HTC USB Modem driver". Maybe because I didn't know, what I'm looking for, till i found it.
Anyway here's link http(Colon)//uloz(dot)to/3934398/gsm-usb-modem.zip*
*only address, i'm not permitted to post links yet

Universal rom flash problems

Would it be possible to re-flash a universal on a different computer if it failed on a pc with vista on it? i got error 101 on the pc with vista.
I'll be attempting the same rom-flash on pc with xp on it. The problem is that activesync doe not find the xda. The xda just shows usb v1.00 and serial when i disconnect the usb.
Any help would be appricated
Open your device in Bootloader mode,
Connect it via USB,
Open the ROM uploader exe,
Click next....
It won't be a problem, i think. It should work anywhere, not on just vista or xp..

connect touch2 with pc

What do i need to do to connect my touch2 with the computer with windows 7. I dont have any software cd when i connect it the pc beeps (like every time u plug in something in to the usb) but i cant see the phone in my computer.
you have to download and install windows mobile device center. i'd find a link but kinda busy at the moment. but search for it. it's free.
Link........http://www.microsoft.com/downloads/...ea-9df9-4920-af33-3a0e2e4e7beb&displaylang=en

Categories

Resources