Related
Hi everybody.!
Im newie in xda technologies, and I have an S200 Qtek.
Im try to upgrade to WM6 and, if it possible, install TouchFlo.
Thanks in advance
Do you mean the "Cube" or finger scrolling?
Finger Scrolling is in almost every new ROM that's out, the Cube is only in "TE" (Touch Edition) ROMs. Have a look around the Prophet Mobile 6 Forum for ROMs.
and please read the guides on ROM flashing before doing anything...
MMMMM the cube, or finger scrolling, is not the same..?
I find this video in youtube...
http://www.youtube.com/watch?v=DWaGDTvwmmc&NR=1
I have the some phone.
Well... I reed tonight, becarefoul everythig and then may be try it...
Thank you very much for the fast answer
Regards.
The finger scrolling is like the iPhone, the Cube is the frontend including the Quick Dial application.
Chriscitalia said:
Hi everybody.!
Im newie in xda technologies, and I have an S200 Qtek.
Im try to upgrade to WM6 and, if it possible, install TouchFlo.
Thanks in advance
Click to expand...
Click to collapse
its realy quite easy...
*** for the follwing make sure the prophet is connected to pc via usb***
1...extract the jumpspl to men card
2...execute jumpspl --- (the screen gos white)
3...extract and execute wm 6.1 touch evalution installer (romupgateutility_nv_g4 or g3)rom in the wiki section\scroll down to prophet and then look for rom upgrading.
4...g4 and g3 are diffrent versions of prophets do to the chip intalled inside... (in boot screen 0001 »g4 001»g3)
5...extract FTouchflocubeESv2.cab to mem card
6...install FTouchflocubeESv2.cab
7...wala you have a qtek s200 with the latest wm6 and fully touchflo capabel ,cube and scrolling. ENJOY.........
4...g4 and g3 are diffrent versions of prophets do to the chip intalled inside... (in boot screen 0001 »g4 001»g3)
Click to expand...
Click to collapse
If it ends in a "1" it's a G4...
If IPL/SPL are something like 2.10.0001, then the device is G4, if it's 2.10, the device is a G3.
hello, i download the files, but it dosen´t work, have an error that can not open the TouchSettings because i need a trust certify,or cannot find one of the components, if the problem continues i have to reinstall or restore this file. I have done it severel times but the seme error, what can it be worng??
by the way my spl = 2.g4.4PDA, would tha be the problem?
Regardas from El Salvador, Central America.
conde20 said:
hello, i download the files, but it dosen´t work, have an error that can not open the TouchSettings because i need a trust certify,or cannot find one of the components, if the problem continues i have to reinstall or restore this file. I have done it severel times but the seme error, what can it be worng??
by the way my spl = 2.g4.4PDA, would tha be the problem?
Regardas from El Salvador, Central America.
Click to expand...
Click to collapse
I'm having same problem.
But i didnt installed wm6. only installed the touchflo application
Hi All
did anyone get this to work? as this is all new to me i do not want to try and ugrade as if it fails, i do not have the know how to get myself back to where i started off.
Thanks Chris
I tried but seams to always get stuck in the colored screen in the start up... if I do the things to fix this (found in the wiki, will it still work?) because my didn't the dosen't work properly btw the screen didn't get with for me when installing jumpSPL... any ideas what went wrong?
Hi!
At first - iam german speaking and so iam sorry about my english, if it is not perfect...
Now my problem: I just installed WinVista on my desktop pc an i want to install also activesync to keep my calender/contacts etc... By the way i have Bepe 0.67 Premium German.
So i started everything (a green program looks like for childes) now it is called windows mobile device center, an the first thing the program did is clean-up my touche cruise. no numbers & no calender. s**t.
So i get a little nervous and i search for a backup to get my files back. And i find it. On my MicroSD Card on the device. so i start "SpriteBackup" and the program runs, go, go, go and next next next - loading... and restart.
So... it loads... show me my rom number, the HTC Logo comes -- an then -- nothing. The logo stands on the screen, doing nothing. the only thing i can hear is a sound like when you press I/O for a few seconds, when the window with "would you really shut down" comes.
And so i start searching for a solution. and the ROM could be the solution. because i think i loaded the backup file from the first "original" system, not the bepe 0.67. an so i think the rom is not working with the older version. and because the active sync wont connect to the phone, i can not put a other rom on it, or play again the bepe rom in.
so... understand? and any ideas?
I think you can't do anything at this point... If it is possible flash the original ROM then restore your backup and then take a backup with PIM Backup (search forum) which is cross ROM compatible...
Then flash bepe's rom again and restore the backup you made with PIM backup!
the problem is that activesync cannot connect with the device - and so i can not update the rom or anything...
To update the rom just manually enter the bootloader by holding the camera button while doing a soft-reset. Then at the tri-colored screen connect the usb cable and run rom updater (assuming you have hard-spl installed ofcourse )
yeah! thank you!
now i only have to find the missing numbers...
Have a nice day!
Here are some bootscreens and a splashscreen (for this you must have Unsigned Hard SPL from Olinex or someone other on your device) for your diamond. Download the boot.rar, there is a flash-tool inside for the splash-screen. The welcomehead must be copied in windows.´If you use the welcomehead for the Gold-Theme, please rename it in welcomehead.192.png, before you copy it to windows. After a reboot you see the changes.
Good luck.
My picture is not in the download It is only an example, what you can do with splash-screens to personalize your diamond.
hello sir .. i have a problem with this splash screen which i bought my diamond
from a cell company .. and the logo of this company starts in the splash/boot screen .. and i want to remove it and i dont know how ?!?!?
to clear everything to you .. when i start my diamond .. first this show up (( HTC Touch Diamond )) logo .. then the company logo (( AirTel )) then .. (( Windows Mobile 6.1 ))
i just want to remove this annoying logo of (( AirTel )) could you tell me how ??
or could anyone tell me how ?
Here are some of mine.
whats with buddy and his beard? creepy...
Neo XL said:
Here are some bootscreens and a flashscreen (for this you must have Unsigned Hard SPL from Olinex or someone other on your device) for your diamond. Download the boot.rar, there is a flash-tool inside for the splash-screen. The welcomehead must be copied in windows.´If you use the welcomehead for the Gold-Theme, please rename it in welcomehead.192.png, before you copy it to windows. After a reboot you see the changes.
Good luck.
My picture is not in the download It is only an example, what you can do with splash-screens to personalize your diamond.
Click to expand...
Click to collapse
Hello Sir. I also have a problem with my Diamond. I installed these bootscreens and after 3 or 4 hardresets and installing a new ROM they are crap. Except the one with the guy and the not-kitchy diamonds on top. Please help me I have searched everywhere I even read the stickies.
badrey said:
hello sir .. i have a problem with this splash screen which i bought my diamond
from a cell company .. and the logo of this company starts in the splash/boot screen .. and i want to remove it and i dont know how ?!?!?
to clear everything to you .. when i start my diamond .. first this show up (( HTC Touch Diamond )) logo .. then the company logo (( AirTel )) then .. (( Windows Mobile 6.1 ))
i just want to remove this annoying logo of (( AirTel )) could you tell me how ??
or could anyone tell me how ?
Click to expand...
Click to collapse
You have to flash at first Unsigned Hard SPL from Olinex (1.40 or 1.93...depending to your diamond. Here you can find the tools. After this you can create your own splash-screens or take some out of this forum. The third screen is named welcomehead.192.png. It´s a graphic with 640x640 pixel. You have to copy it in windows. If you have downloaded my files, there are this files inside.
Edit: I didn´t read right...at this time i don´t know a way to change the 2nd screen... in original roms it´s the htc animation. Maybe, if you flash a rom, this screen would be changed in the same way.
Note: Don´t use the exe-tool, if you hadn´t flashed Hard SPL before.
Blazeitup123 said:
whats with buddy and his beard? creepy...
Click to expand...
Click to collapse
This is only an example, how you can brand your phone with a picture of yourself. It´s me on the pic....don´t worry. Thieves will be angry about this, because they will be always remembered to the owner
buciuman said:
Hello Sir. I also have a problem with my Diamond. I installed these bootscreens and after 3 or 4 hardresets and installing a new ROM they are crap. Except the one with the guy and the not-kitchy diamonds on top. Please help me I have searched everywhere I even read the stickies.
Click to expand...
Click to collapse
What are you doing? Why do you make so often a hard reset? I posted this yesterday, and you reset since this 4 times? Read the posts before.... If you flash new roms, maybe there were splash-screens inside. I flashed yesterday two roms, and my splash-screen is like it was before. Why did you copy my photo on your diamond? It was only an example Try to flash again, if there are problems.
You can read also this post post to learn more about building splash-screens
Hi all, I was trying to manually change in windows directory the welcomhead file, but it's read only... How can I change it?
Thanks, Andrea
Genius2000 said:
Hi all, I was trying to manually change in windows directory the welcomhead file, but it's read only... How can I change it?
Thanks, Andrea
Click to expand...
Click to collapse
The actual file in windows is the file out of the rom. If you copy the welcomehead to windows with total commander, normaly there is no problem. Otherwise you can try, to unmark read only and copy after this your new file to windows. I am doing this since many years, before on my prophet and other pda´s. After reboot you have your new bootscreen.
Neo XL said:
The actual file in windows is the file out of the rom. If you copy the welcomehead to windows with total commander, normaly there is no problem. Otherwise you can try, to unmark read only and copy after this your new file to windows. I am doing this since many years, before on my prophet and other pda´s. After reboot you have your new bootscreen.
Click to expand...
Click to collapse
Done with total commander, many thanks!
Ciao, Andrea
I can't install android on my hd2 I already installed HSLP3 2.08 also running energy rom
manilla version 2.5.20191914.0
radio 2.12.50.02_2
OS version 5.2.23148
Ive tried so many android builds some times when i run it the little android white letters appear as it should but there shrunk and appear at the left top cornerof my phon ive only been able to run it twice and android worked bt after a reboot it went back to the htc screen for hours and never was able to get it started pls someone pls help me ive been trying to slove this proble for weeks bt haven't been able to solve it please some help me!
format your sd card then try again. or flash different rom like chuckydroid or vbnrom.
ive tried that too no results
hello
iabf said:
ive tried that too no results
Click to expand...
Click to collapse
energy rom is just fine, try 2.12.50.xxx radio, donwload the android build you want and unzip to desktop on pc, grab android folder and place on root of your sd...... you cant always use the android bootloader on this WM rom unless you edit the startup on android build...... on WM go to start>tools>file explorer> make sure keypads lights are on and hit CLRCAD first, then hit HARET and just let it go all the way, some builds take longer on first boot cuz data.img is being created so wait bout 5-10-15 min ........ dont forget to turn off auto backlights on WM before doing all this.. good luck...
Maybe a change back to HSPL2 would help..
Do you happen do have extended battery?
ive done tha many times bt it just goes into these really small letters at the left top corner of tha phone it doesn't load up like other android boots ive seen and it goes to htc screen what culd it bcuz it never loads up after hours
hello
iabf said:
ive done tha many times bt it just goes into these really small letters at the left top corner of tha phone it doesn't load up like other android boots ive seen and it goes to htc screen what culd it bcuz it never loads up after hours
Click to expand...
Click to collapse
ok, start all over again.... download and do task29, reinstall your energy rom upgrade radio again, apply settings i gave you and try to boot again..... let me know how it goes
What type of sd card are you using, try a different sd card... That eliminates the sd card as the culprit.
I have the original 16gb sd card that comes with the phon and im sure its not corrupted bcuz it works great
can u explain a little better what kenel and linux is or if i hve to update tha too i really dont undestand what that really is?
matutemhn said:
energy rom is just fine, try 2.12.50.xxx radio, donwload the android build you want and unzip to desktop on pc, grab android folder and place on root of your sd...... you cant always use the android bootloader on this WM rom unless you edit the startup on android build...... on WM go to start>tools>file explorer> make sure keypads lights are on and hit CLRCAD first, then hit HARET and just let it go all the way, some builds take longer on first boot cuz data.img is being created so wait bout 5-10-15 min ........ dont forget to turn off auto backlights on WM before doing all this.. good luck...
Click to expand...
Click to collapse
Hey Ill be installing android soon when I get back my phone from warranty, and I dont know what auto backlights are(my motherlanguage isnt english) and how to turn them off?
Can you tell me?
Also explain if it is a hd2 with 320mb ram
Sent from my Desire HD using XDA App
OK i got Mdeejay_FroYo_HD_v._3.7 to work on my phon but it sais it cannot connet to the internet does anybody know what files i should change or how can i fix this? pls help
InterNet ExpLorer dont work on android how can i fix this?
i got Mdeejay_FroYo_HD_v._3.7 to work on my hd2 but everytime i trie to go to the internet it says there is no connection avaliable how can i fix this ploblem pls someone help?
This is what i did
I flashed the newest hard spl i think it is number 3.0 and changed the radio to 2.12.50 and after i put energy rom on it what will upgrade my ram to 570 or something. I am very happy with that rom very fast and stable. Now im using FroyoStone Sense - V3.2][Kernel: linux_on_wince_htc 2.6.32.15] from darkstone.
Im sorry for all the winmo 6.5 hardcore users. I tweaked and played with it for a time now. But now im using froyo from my sd card (very fast and stable) I want nothing else. I hope there will be a rom soon so i can cook a android rom on my hd2 leo. I think the biggest reason for me is the amount of good quality apps.
Peace out.
I've been searching for two whole days to find some WWE cooked roms for the asus p535, and i could barely find anything, so i have been searching for roms on russian sites (i love my mom, she translated a lot of info for me) I am posting this because almost 99% of links from English forums/websites are dead, and someone might be in desperate search for rom updates, just like i was. I can't put up the credits though because, as i said, i don't speak russian and i didn't want to bother my mom with it more than necessary.
I will try to periodically update this post in case i find anything new.
TO FLASH ANY ROMS YOU MUST FIRST RUN THIS EXE IN ORDER TO UNLOCK YOUR LANGUAGE
http://asapload.com/info?id=131732
Instructions on flashing roms:
1. Get a mini sd card 2gb or less
2. Format it to Fat16 filesystem (recommended, not necessary)
3. Place ASUS.UnlockLangID.exe and GalaxyII.nb0 on the ROOT of your sd card
4. Run ASUS.UnlockLangID.exe
5. Press dpad up + record + camera + power buttons simultaneously and then push the soft reset button
6. You should see a white screen with text on it, insert your usb cable or usb charger and the update should start.
7. After the update it will automatically soft reset your device
WINDOWS MOBILE 6.1 ROMS:
English lite 6.1 rom MINI: http://asapload.com/info?id=131730
English with some things russian (Some settings and voice command) : http://asapload.com/info?id=131733
English touch flo 6.5 styled rom:http://asapload.com/info?id=131735
English HTC Diamond styled 624MHz overclocked rom:http://asapload.com/info?id=131734
(Found the same on xda: http://forum.xda-developers.com/showthread.php?t=403882)
6.1 Clean:
6.5 HTC Home:
(Source: http://allppcrom.blogspot.com/2008/10/asus-p535-rom-wm61-v476108.html)
WINDOWS MOBILE 6.5 ROMS:
WM6.5_23004 (older 6.5 with slim startbutton/app rows):http://asapload.com/info?id=131737
WM6.5 with SPBshell (I use this one. It has 128mb ram support, and you can disable spbshell by deleting /windows/start up/spbshell.ink shortcut): http://asapload.com/info?id=131729
WM6.5 Pdaviet: http://asapload.com/info?id=131738
(Original link: http://www.ctrlpda.com/showthread.php?56671-ASUS-P535-ROM-WM6.5-PDAVIET-%28Build-23064.5.3.0%29&)
Linux for asus p535
NOTE: This is not a ROM! For installation instructions refer to the manual in the link below:
http://sites.google.com/site/siteofhx/Home/linux/linux-running-on-asus-p535
Link for the 64mb version:http://asapload.com/info?id=131740
Link for the 128mb version: http://asapload.com/info?id=131742
5. Press dpad up + record + camera + power buttons simultaneously and then push the soft reset button
Is any other way to do this without the reset buton? ... because mine is broken.
Thanks.
you can't gog to bootloader without combinaison button... if your button is broke, you can easily open your P535... mine is still here... sometimes i use this one to test my skins on small res...
I already opened my P535, i've just bought it. It had broken screen(the screen is fine but the touch does not work) and have change it myself by my P525 Asus screen(that works fine). Same screen P535 and P525, same batery....
I also want to try Android on P535.I loved P525 so much and now it looks very bad.
I think I need to take P535 to service, for repair that reset buton .
I wonder if there is Titanium to work on WM6 P535. Does anybody knows?
Sory for my bad english.
Thanks.
Windows mobile 6.5 works like a charm on P535... when i use my P535, i made some rom with a Friend... French & english version...
support 64 Mb & 128 Mb, clean and full stuff version...
LastesT ROM are here... http://forum.xda-developers.com/showthread.php?t=508315
About your broken Reset... you can use USB flash method... now i remember method using actve Sync...
Read more info with link !
Thanks, but I read on your site (i think) and in the tutorial it say this
"Connect your P535 to PC via USB port. Press Rec+Power button (at the same time) and then Soft Reset (Press Rec+Power button util Boot Loader program startup you will see message Waiting)."
This mean that I also cannot instal, and i am afraid to brick the phone.
To P525 I managed to change many times, in miniSD mode.
By USBloader I managed to brick my Samsun Wave s8500, so if I need to press Reset... I am afraid to brick this one to. (Of course Wave works now thanks to a friend... after 8 weeks of trying...)
But there isn't Titanium for WM6? I only want to have Titanium for the menu, not necesarly WM6.5, if it's posible.
Anyway in few days I'l take the phone to service to see that the reset buton can be fixed.
Very good job with that roms.
Thank again.
1 - TITANIUM is WM6.5 basic UI
2 - USB loader is only used to turn your device on bootlader mode then flash using MiniSD
3 - Flash is easy as well... my P535 has been flashed more than 500x... and is still alive... Flash on P535 is very easy...
If you have some trouble... you can upgrade using official method to WM6.1... no more version after this one...
Have fun !
I mean I am afraid only because cannot press reset... If the reset buton can be fixed I will instal WM6.5 ...
I tried official (I think), update by WI-FI and update by PC-Sync ... there is an error, code 80072ee7 ...
I'l wait to fix the reset buton.
Thanks for the answers.
Can someone help me please?
5. Press dpad up + record + camera + power buttons simultaneously and then push the soft reset button
when i do this, i get the white screen with do i want to reset or just carry on green button for reset, so if i press this, it just simply resets my current os and hasnt loaded a new rom
i can get to the same screen by just pressing reset and dpad up.. is this the same?
how do i actually get it to load the new os off the sd card? as i seem to fail at that point
thanks
its ok done it now, but all roms seem pretty much same crappy
does anyone have a link to one of the ones that run something like the htc touch flo interface? i have seen this one but couldnt find a donwload for it
I have instaled the one like HTC(I think) ... name is "rom0.zip"=> galaxyII.NBO I think is the one with SPBshell
I like this phone now more than S8500( this only has superamoled screen), on this OS
Can the screen be replaced by one with 256k colors?? The phone is better with a better screen. Don't knnow how to explain .
Thanks to Award982 for making this topic.
Thanks to Lesscro for creating this ROMs
lesscro said:
Windows mobile 6.5 works like a charm on P535... when i use my P535, i made some rom with a Friend... French & english version...
support 64 Mb & 128 Mb, clean and full stuff version...
LastesT ROM are here... http://forum.xda-developers.com/showthread.php?t=508315
About your broken Reset... you can use USB flash method... now i remember method using actve Sync...
Read more info with link !
Click to expand...
Click to collapse
Lesscro, i tried downloading from your site but your links from multiupload do not work. Can you please re-upload them? And also, do you maybe still have the kitchen for it and would mind sharing?
jason4656 said:
its ok done it now, but all roms seem pretty much same crappy
does anyone have a link to one of the ones that run something like the htc touch flo interface? i have seen this one but couldnt find a donwload for it
Click to expand...
Click to collapse
English touch flo 6.5 styled rom:http://asapload.com/info?id=131735
Try this one, but it isn't something very good... asus p535 is pretty much a dead phone now, no one has one these days, and i bought mine by accident two weeks ago (my neighbors father had one for gps and didn't need it anymore), because i've been looking for one for three years already (i had one but it died and i sold it for parts). There are barely any people still using this phone. If i get an english kitchen by any chance, i will try to make a good stable rom with 6.5 wm and touchflo 2d.
award982 said:
English touch flo 6.5 styled rom:http://asapload.com/info?id=131735
Try this one, but it isn't something very good... asus p535 is pretty much a dead phone now, no one has one these days, and i bought mine by accident two weeks ago (my neighbors father had one for gps and didn't need it anymore), because i've been looking for one for three years already (i had one but it died and i sold it for parts). There are barely any people still using this phone. If i get an english kitchen by any chance, i will try to make a good stable rom with 6.5 wm and touchflo 2d.
Click to expand...
Click to collapse
for some reason i can never access that site, is it working for you guys? ive tried from 2 ips and 2 computers, get same problem.
Yeah, it seems down :/ weird, it's not long ago since i've uploaded the roms up If you use skype i could send you it through there
can you transfer on big file or something?
Sorry about delay, i serach on my HDD... i can't found any ROM or any kitchen...
at this point... i have no more nb0 available... multiupload seems to be dead actually... maybe last build is still active...
but i need check multiupload !!
last build is 28238 Wm6.5.5 WWE 64 & 128 Clean & full version
Hi, user your rom, ok?
with WCE 6.5, you can do more
GPS Maps
I wonder how to download maps for GPS...
I connect to computer and try to download by tomtom automatically, but it's an error., I guess because is tomtom for HTC.
How cad I have GPS with maps?
I instaled WM6.5 with sbbshell
Thanks.
if you use tomtom, you need buy it... XDA is not a warez site...