I just test my Polaris wireless speed on http://www.dslreports.com/mspeed. The browser is Opera 9.5 and the new IE6.
The D/L speed on Polaris with WIFI is lower than my HTC Tornado with only 802.11b.
So i think maybe the 802.11g is disabled default in Polaris. How can i enable it?
BTW, my router is Linksys wireless N.
Thanks!
Use SKtools.
T1TAN20 said:
Use SKtools.
Click to expand...
Click to collapse
Many thanks, now my polaris in very very fast
And what has to be done with SKTools?
My SkTools in italian language: Ottimizza ---> TCP/IP ----> Supporto WLAN 802.11G change in si [yes]
Now the polaris in Wlan have double speed
rspillo said:
My SkTools in italian language: Ottimizza ---> TCP/IP ----> Supporto WLAN 802.11G change in si [yes]
Now the polaris in Wlan have double speed
Click to expand...
Click to collapse
I cant find this option in SKTools latest ver.4.4.4.1 (registered)
But i got the 1200-1700 kbps, is that mean the G has been enabled in this ROM?
Before i have 600 Kbps, now 1700, you?
lanny said:
I cant find this option in SKTools latest ver.4.4.4.1 (registered)
But i got the 1200-1700 kbps, is that mean the G has been enabled in this ROM?
Click to expand...
Click to collapse
Look in Tune Up!-->Network (Tab)-->WLAN 802.11g Support. Set this to Yes if its No.
psychedelicNerd said:
Look in Tune Up!-->Network (Tab)-->WLAN 802.11g Support. Set this to Yes if its No.
Click to expand...
Click to collapse
Got it! 10X buddy!
But the speed looks like similar to before.
there's a thread about that:
http://forum.xda-developers.com/showthread.php?t=292421
I swear i could connect to G before, but then it broke a week ago.
now sktools shows it's off!
I went to the registry and the key Parms didn't have those values. I just created them. Should the work?
Related
On the top of the screen you have the GPRS icon which looks like [G], however the phone is EDGE, right ?
The tool I found the web allows you to display the EDGE icon like [E].
Just copy the CAB file to your ppc, execute it and reboot !
Works fine.
Pixel69 said:
On the top of the screen you have the GPRS icon which looks like [G], however the phone is EDGE, right ?
The tool I found the web allows you to display the EDGE icon like [E].
Just copy the CAB file to your ppc, execute it and reboot !
Works fine.
Click to expand...
Click to collapse
Nice ! Thanks...
Does this just show an E for everything or when I am on GPRS instead of Edge it switches appropriately?
just replaces it entirely - so if you're not actually on an EDGE network, but on a GPRS network, you'll see an 'E'.
Damned if you do, damned if you don't
We really want to know whether we are on a GPRS network or an EDGE network. I installed ROM 1.6.7.1 from Qtek on my K-Jam and I have the E & G icons and they switch back and forth depending on network coverage.
you see G and E *AFTER* doing the reg hack or *WITHOUT* doing it? Ths is what we're all looking for.
thanks!
McHale said:
you see G and E *AFTER* doing the reg hack or *WITHOUT* doing it? Ths is what we're all looking for.
Click to expand...
Click to collapse
*after*. by default, EnableDifferGprsEdgeIcon is set to 0 in qtek 1.6.7.1 ROM. after setting it to 1 and soft-reset it works.
gah, was using the wrong sim! now it works - sorry about that
i have installed the new rom... tried to do the regisry hack by changing it from 0 to 1.but the icon still shows [G]..alot of other ppl seem to have the same problem..dont knw why....
but at the end of the day, i aint quite fussed wether its G or E
FWIW, I did this registry hack & my phone is now displaying G when in GPRS territory, and E when in EDGE territory.
I just got back from a trip to Bangkok, where I use the DTAC network. When in parts of Bangkok where EDGE is available (Siam Square, Sukhumvit, Asoke, etc) my phone would display the E icon. When in areas with GPRS only (Saphan Kwai, Mo Chit, etc) then it displayed the G icon. My reported speeds on dslreports.com/mspeed confirmed my observations (GPRS approx 35-40k/sec, EDGE approx 75-80k/sec)
Screenshot
Hello all,
I found that registry hack two weeks ago.
Works well and efficiently !
I've succesfully tested it with 3 french carrier.
Martinlbb
doesnt work, qtek 9100 latest rom..
run your cab, soft reset, didnt do anything?
i dont understand, got edge coverage here.
Re: doesnt work, qtek 9100 latest rom..
tavi said:
run your cab, soft reset, didnt do anything?
i dont understand, got edge coverage here.
Click to expand...
Click to collapse
What ROM do you have? ROM 1.6.7.1?
This hack doesn't work for some old ROMs.
is there a way to display a diffirent icon ??
I have ROM 1.3.1.4 and I have no problems. :roll:
This hack works on the Dopod 818Pro (WWE)!! I'm on Cingular in California and it does flip between "G" and "E" depending on where I am. Also works throught the U.S. between places with GPRS and EDGE....
VERY COOOOLLLLLLL!!!!
ualvoyager
qtek 9100 ROM
still doesnt work,
ROM version 1.6.7.1 WWE
ROM date 11/28/05
Radio version 01.13.10
protocol version 4.0.13.24
ExtROM version 1.6.7.101
Hi to all,
I've the problem that this hack dosn't work on my VPAcII. I just figured out that I've 3 bitmaps in the windows-folder of my device: gprs.bmp", "gprs_connect.bmp" and "GPRSConnectPPC.bmp" - these bitmaps are displayed when I'm online - but I can't find any bitmaps with "E" inside? Can anyone of you where the hack is working find out if there are such bitmaps with "E" in the windows folder of the device - and if yes (I'm shure that they are there) post these bitmaps in the forum, would be very happy if I can get them...
many thanks
Gerald
Re: qtek 9100 ROM
tavi said:
still doesnt work,
ROM version 1.6.7.1 WWE
ROM date 11/28/05
Radio version 01.13.10
protocol version 4.0.13.24
ExtROM version 1.6.7.101
Click to expand...
Click to collapse
have you done registry hack before? i've the same ROM and it works. maybe you're just outside EDGE coverage?
gekap said:
I've the problem that this hack dosn't work on my VPAcII. I just figured out that I've 3 bitmaps in the windows-folder of my device: gprs.bmp", "gprs_connect.bmp" and "GPRSConnectPPC.bmp" - these bitmaps are displayed when I'm online - but I can't find any bitmaps with "E" inside? Can anyone of you where the hack is working find out if there are such bitmaps with "E" in the windows folder of the device - and if yes (I'm shure that they are there) post these bitmaps in the forum, would be very happy if I can get them...
Click to expand...
Click to collapse
it does NOT depend on bitmaps, unfortunately. it was already investigated in some other topic and the conclusion was that EDGE icon is hidden probably in tapires.dll file.
i've EDGE icon working, but i don't have any edge.bmp in \Windows folder
Hi, is there any status of hsdpa is activatet??
like an H in the top line??
whats the normal internet speeds with:
gprs
edge
umts
hsdpa
??
now i have found the mobile version of dslreports speedtest...
about 450 kbit with umts ... not very fast... i think
My best speeds i've obtained...
GPRS- 44kbits
UMTS- 380kbits
HSDPA- 1100kbits
no zphone skin on pin screen
johnk1973 said:
My best speeds i've obtained...
GPRS- 44kbits
UMTS- 380kbits
HSDPA- 1100kbits
Click to expand...
Click to collapse
ok thanks... helps alot...
looks like no hsdpa is available ...
status? of hsdpa is where shown??
one other questions about the zphone skins...
after installing the extended rom files the "enter PIN" Windows is not skined with the zphone skin... befor installing the extended rom it was skinded??? what can i do??
Re: no zphone skin on pin screen
futureshock said:
johnk1973 said:
My best speeds i've obtained...
GPRS- 44kbits
UMTS- 380kbits
HSDPA- 1100kbits
Click to expand...
Click to collapse
ok thanks... helps alot...
looks like no hsdpa is available ...
status? of hsdpa is where shown??
one other questions about the zphone skins...
after installing the extended rom files the "enter PIN" Windows is not skined with the zphone skin... befor installing the extended rom it was skinded??? what can i do??
Click to expand...
Click to collapse
There is no indication that you are using HSDPA if you are using UMTS already, you just notice the speed difference.
In the TyTN wiki - tools it tells you how to check if HSDPA is enabled.
Look here for Fieldtest.exe application:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Utils
Select "HSDPA CQI STATUS" in the menu, if it shows any number bigger than 0 when you have a data connection established means that you're using HSDPA.
Interesting... Running this on my M3100 on Orange and there were a couple of 4's and a couple of 1's. Though O hadn't rolled out HSDPA yet?
andyf1 said:
Interesting... Running this on my M3100 on Orange and there were a couple of 4's and a couple of 1's. Though O hadn't rolled out HSDPA yet?
Click to expand...
Click to collapse
Same here. But download speed only reachs 380 kbps althouth Telefonica say there is HSDP in Madrid
Hi There,
Just found the following info there:
http://www.clieuk.co.uk/wm.shtml
Can output packets to a cap file (ethereal) among other things.
Direct link to the software:
http://www.microsoft.com/downloads/...01-49d4-4506-a03b-c41bc76c2f51&DisplayLang=en
And for those overlooking the instructions:
Only install in ROM, not on Storage/SD
Cheers,
Hal
Software placeholder
Here is the software, just in case some can't access this page.
Now the question is: does it work in L2 promiscuous mode? Would be nice to troubleshoot basic WiFi...
Enjoy,
Hal
Network Analyser ?
Does this software only work on ARM devices ? Can't get it to work with my HTC TyTN
Re: Network Analyser ?
Chrille1101 said:
Does this software only work on ARM devices ? Can't get it to work with my HTC TyTN
Click to expand...
Click to collapse
works great on my wizard
Re: Network Analyser ?
Menneisyys said:
Chrille1101 said:
Does this software only work on ARM devices ? Can't get it to work with my HTC TyTN
Click to expand...
Click to collapse
works great on my wizard
Click to expand...
Click to collapse
I'm wondering how it works overall.. I haven't tried it yet, as I've had this fit of customizing OS ROM's that I think I finally have out of my system.. Need to put it on my device, just haven't gotten that far yet.
I would really like to test this little util, but doesn`t work on my O2 Trion.
Chrille1101 said:
Does this software only work on ARM devices ? Can't get it to work with my HTC TyTN
Click to expand...
Click to collapse
Works fine on my Tytn.
ROM 1.18.255.3
Radio 1.03.03.10
ExtROM 1.18.266.106
New fixed rom available for download from PDAViet.
http://rapidshare.com/files/123320849/POLARIS_WM6.1_v1.52.61.20_B19214.7z
See http://pdaviet.com/forumdisplay.php?f=161 for V20 details, testing now..
Zip assword as always: PhamQuang
Hi, thanks! Can you please upload it somewhere else aswell?
What's new? I can't see the original thread somehow
Testing.
jbekker said:
What's new? I can't see the original thread somehow
Click to expand...
Click to collapse
Hi jbekker, see http://forum.xda-developers.com/showthread.php?p=2315649#post2315649 for details.
gadjet said:
Hi jbekker, see http://forum.xda-developers.com/showthread.php?p=2315649#post2315649 for details.
Click to expand...
Click to collapse
Please more details
change log
any know what the changes made since v18 are?
programs included?
Awesome..
What can I say except THANK YOU, THANK YOU PhamQuang, and PDAViet.
Excellant release, all my prevoius bugs fixed, fastest my touch cruise has ever been, TomTom is mega fast now, everything seems so much faster, even the internet pages loading is almost twice as fast...
V20 rocks...
xrrkrrkx said:
any know what the changes made since v18 are?
programs included?
Click to expand...
Click to collapse
I'd like to know that too... Plz someone who has it tell us!! (Or translate)
gadjet said:
What can I say except THANK YOU, THANK YOU PhamQuang, and PDAViet.
Excellant release, all my prevoius bugs fixed, fastest my touch cruise has ever been, TomTom is mega fast now, everything seems so much faster, even the internet pages loading is almost twice as fast...
V20 rocks...
Click to expand...
Click to collapse
How about very big error with video playback? Its fixed?
Mirrors anyone?
Uploading mirror now..
reyjabs said:
Mirrors anyone?
Click to expand...
Click to collapse
Hi reyjabs.
Check back in 20 mins mirror should be uploaded by then..
Edit:
http://rapidshare.com/files/123408822/POLARIS_WM6.1_v1.52.61.20_B19214.7z
Pretty much udk R3 but :
Pro's
The twist of the cube is (original) nicer
More 40MB of storage and 10MB of Program RAM, but after instaling :
-Opera 1126 of course
-Acrobat pdf : http://forum.xda-developers.com/showthread.php?t=395400
-A nicer dialpad
-Diamond keyboard
-Streaming media : http://rapidshare.com/files/122045134/HTC_Diamond_Streaming_Media.cab
-If it was possible to install Arcsoft MMS (not working, hang, so no MMS!)
it would lead us to more or less the same RAM as udk's
But everyone can choose what to install and that's cool
Con's
Largetitlebar (i like it, and the dll is there but can't enable it and can't install the cab).
Newmenu (can install it dow)
Didn't test FM radio and videocall yet.
TouchFlo 3D..
jpl69 said:
Pretty much udk R3 but :
Pro's
The twist of the cube is (original) nicer
More 40MB of storage and 10MB of Program RAM, but after instaling :
-Opera 1126 of course
-Acrobat pdf : http://forum.xda-developers.com/showthread.php?t=395400
-A nicer dialpad
-Diamond keyboard
-Streaming media : http://rapidshare.com/files/122045134/HTC_Diamond_Streaming_Media.cab
-If it was possible to install Arcsoft MMS (not working, hang, so no MMS!)
it would lead us to more or less the same RAM as udk's
But everyone can choose what to install and that's cool
Con's
Largetitlebar (i like it, and the dll is there but can't enable it and can't install the cab).
Newmenu (can install it dow)
Didn't test FM radio and videocall yet.
Click to expand...
Click to collapse
Hi jpl69.
Its a good PDAViet rom for sure, not tried any of the udk rom's yet though, still waiting for someone to come up with new touch flo 3d built into a rom..
xrrkrrkx said:
any know what the changes made since v18 are?
programs included?
Click to expand...
Click to collapse
Hi xrrkrrkx.
Still waiting for someone to translate change log..
gadjet said:
Still waiting for someone to translate change log..
Click to expand...
Click to collapse
There is no changelog since the ROM is based on a build which PhamQuang has never used before.
It's based on latest AT&T Kaiser ROM and uses WMP skin by Aqrab and Audio Manager skin by Poorlyduck.
Sascha
Video calling is not working....
Does it work for someone else?
Anyone know how to fix?
Otherwise very fast and stable.
Thanks!
Mehrab
jpl69 said:
Pretty much udk R3 but :
Pro's
The twist of the cube is (original) nicer
More 40MB of storage and 10MB of Program RAM, but after instaling :
-Opera 1126 of course
-Acrobat pdf : http://forum.xda-developers.com/showthread.php?t=395400
-A nicer dialpad
-Diamond keyboard
-Streaming media : http://rapidshare.com/files/122045134/HTC_Diamond_Streaming_Media.cab
-If it was possible to install Arcsoft MMS (not working, hang, so no MMS!)
it would lead us to more or less the same RAM as udk's
But everyone can choose what to install and that's cool
Con's
Largetitlebar (i like it, and the dll is there but can't enable it and can't install the cab).
Newmenu (can install it dow)
Didn't test FM radio and videocall yet.
Click to expand...
Click to collapse
Edit
MMS works arcsoft mms version 5.0.31.7
Videocall works just search for Taiseer enable 3G video telephony cab
had to install flashlite and now i have the same config has i had in udk less the largemenu and for my surprise i have more 20MB storage ram then i had with udk r3
can anybody post a list of programs included and screenshot?
Mehrab said:
Does it work for someone else?
Anyone know how to fix?
Otherwise very fast and stable.
Thanks!
Mehrab
Click to expand...
Click to collapse
for video calling, a cab built by taiser999 exists...you could find it in his posts
cheers
citrix80 said:
can anybody post a list of programs included and screenshot?
Click to expand...
Click to collapse
+10000 Already!!!
I have 3G dataconnect in Universal (WM6.1 Tomal) is it possible at use Universal with USB-cable or wlan-connection so that i can go to internet with my laptop through Universal?
If i can what settings do i need change example in wlan-settings?
Thanks, MadAri
yes with internet sharing
nasr345tt said:
yes with internet sharing
Click to expand...
Click to collapse
Is that a program or settings? Where can i find it in Universal?
>MadAri<
MadAri said:
Is that a program or settings? Where can i find it in Universal?
>MadAri<
Click to expand...
Click to collapse
Hi, i did find it at program-files and it works find. Thanks.
>MadAri<