On the top of the screen you have the GPRS icon which looks like [G], however the phone is EDGE, right ?
The tool I found the web allows you to display the EDGE icon like [E].
Just copy the CAB file to your ppc, execute it and reboot !
Works fine.
Pixel69 said:
On the top of the screen you have the GPRS icon which looks like [G], however the phone is EDGE, right ?
The tool I found the web allows you to display the EDGE icon like [E].
Just copy the CAB file to your ppc, execute it and reboot !
Works fine.
Click to expand...
Click to collapse
Nice ! Thanks...
Does this just show an E for everything or when I am on GPRS instead of Edge it switches appropriately?
just replaces it entirely - so if you're not actually on an EDGE network, but on a GPRS network, you'll see an 'E'.
Damned if you do, damned if you don't
We really want to know whether we are on a GPRS network or an EDGE network. I installed ROM 1.6.7.1 from Qtek on my K-Jam and I have the E & G icons and they switch back and forth depending on network coverage.
you see G and E *AFTER* doing the reg hack or *WITHOUT* doing it? Ths is what we're all looking for.
thanks!
McHale said:
you see G and E *AFTER* doing the reg hack or *WITHOUT* doing it? Ths is what we're all looking for.
Click to expand...
Click to collapse
*after*. by default, EnableDifferGprsEdgeIcon is set to 0 in qtek 1.6.7.1 ROM. after setting it to 1 and soft-reset it works.
gah, was using the wrong sim! now it works - sorry about that
i have installed the new rom... tried to do the regisry hack by changing it from 0 to 1.but the icon still shows [G]..alot of other ppl seem to have the same problem..dont knw why....
but at the end of the day, i aint quite fussed wether its G or E
FWIW, I did this registry hack & my phone is now displaying G when in GPRS territory, and E when in EDGE territory.
I just got back from a trip to Bangkok, where I use the DTAC network. When in parts of Bangkok where EDGE is available (Siam Square, Sukhumvit, Asoke, etc) my phone would display the E icon. When in areas with GPRS only (Saphan Kwai, Mo Chit, etc) then it displayed the G icon. My reported speeds on dslreports.com/mspeed confirmed my observations (GPRS approx 35-40k/sec, EDGE approx 75-80k/sec)
Screenshot
Hello all,
I found that registry hack two weeks ago.
Works well and efficiently !
I've succesfully tested it with 3 french carrier.
Martinlbb
doesnt work, qtek 9100 latest rom..
run your cab, soft reset, didnt do anything?
i dont understand, got edge coverage here.
Re: doesnt work, qtek 9100 latest rom..
tavi said:
run your cab, soft reset, didnt do anything?
i dont understand, got edge coverage here.
Click to expand...
Click to collapse
What ROM do you have? ROM 1.6.7.1?
This hack doesn't work for some old ROMs.
is there a way to display a diffirent icon ??
I have ROM 1.3.1.4 and I have no problems. :roll:
This hack works on the Dopod 818Pro (WWE)!! I'm on Cingular in California and it does flip between "G" and "E" depending on where I am. Also works throught the U.S. between places with GPRS and EDGE....
VERY COOOOLLLLLLL!!!!
ualvoyager
qtek 9100 ROM
still doesnt work,
ROM version 1.6.7.1 WWE
ROM date 11/28/05
Radio version 01.13.10
protocol version 4.0.13.24
ExtROM version 1.6.7.101
Hi to all,
I've the problem that this hack dosn't work on my VPAcII. I just figured out that I've 3 bitmaps in the windows-folder of my device: gprs.bmp", "gprs_connect.bmp" and "GPRSConnectPPC.bmp" - these bitmaps are displayed when I'm online - but I can't find any bitmaps with "E" inside? Can anyone of you where the hack is working find out if there are such bitmaps with "E" in the windows folder of the device - and if yes (I'm shure that they are there) post these bitmaps in the forum, would be very happy if I can get them...
many thanks
Gerald
Re: qtek 9100 ROM
tavi said:
still doesnt work,
ROM version 1.6.7.1 WWE
ROM date 11/28/05
Radio version 01.13.10
protocol version 4.0.13.24
ExtROM version 1.6.7.101
Click to expand...
Click to collapse
have you done registry hack before? i've the same ROM and it works. maybe you're just outside EDGE coverage?
gekap said:
I've the problem that this hack dosn't work on my VPAcII. I just figured out that I've 3 bitmaps in the windows-folder of my device: gprs.bmp", "gprs_connect.bmp" and "GPRSConnectPPC.bmp" - these bitmaps are displayed when I'm online - but I can't find any bitmaps with "E" inside? Can anyone of you where the hack is working find out if there are such bitmaps with "E" in the windows folder of the device - and if yes (I'm shure that they are there) post these bitmaps in the forum, would be very happy if I can get them...
Click to expand...
Click to collapse
it does NOT depend on bitmaps, unfortunately. it was already investigated in some other topic and the conclusion was that EDGE icon is hidden probably in tapires.dll file.
i've EDGE icon working, but i don't have any edge.bmp in \Windows folder
Related
Hello all,
So I got me a QTEK 9000 with the following set:
ROM Version : 1.13.64 WWE
Radio Version : 1.03.00
Protocol Version :42.36.P8
Here's a few probs I have:
1.) I'm missing that darn BTIcon in my tray. Can anyone post a link to a CAB file enabling me to install the sucker?
2.) When applying the manual VGA tweak for 640X480 res I do not see the Windows Start icon or any other icon in the top bar besides time displayed on the top righthand side.
Please advice and/or provide BTIcon.CAB specifically for HTC Universal or QTEK 9000. I tried all the other options on this website already.
Thanks,
D
Aaah come on people. No one that can help me out here?
So no BT icon on settings/comms?
jah said:
So no BT icon on settings/comms?
Click to expand...
Click to collapse
Settings/Comms sports the BT Icon beautifully but it doesn't show in the Tray and Top.
Try this freeware: http://oz.sciox.org/ozbt.html
jah said:
Try this freeware: http://oz.sciox.org/ozbt.html
Click to expand...
Click to collapse
Thanks my friend. Already tried that one. Tried all solutions so far on this board. So far it does not seem to work for my QTek 9000.
dennisaion9000 said:
jah said:
Try this freeware: http://oz.sciox.org/ozbt.html
Click to expand...
Click to collapse
Thanks my friend. Already tried that one. Tried all solutions so far on this board. So far it does not seem to work for my QTek 9000.
Click to expand...
Click to collapse
try flashing it with a different rom, a jasjar rom perhaps....
San
Hello Dream,
Thanks for the advice but in my opinion something as simple as a Bluetooth icon should be solveable without referting to a complete ROM change. Please advice.
Best regards,
D
try
http://forum.xda-developers.com/viewtopic.php?t=29894&highlight=bluetooth+icon
try
http://forum.xda-developers.com/viewtopic.php?t=29894&highlight=bluetooth+icon
Mikey Mike said:
try
http://forum.xda-developers.com/viewtopic.php?t=29894&highlight=bluetooth+icon
Click to expand...
Click to collapse
thank you thank you thank you.
I am just curious, when you say BT icon, are you referring to the small icon on the tray that shows the connection for the phone, BT, WiFi, and All?
Hi,
Regarding your missing icons in VGA mode. The 96.dll files have been "signed" with a developers certificate (SDK) therefore you need to load the SDK certificate on to your system before these system resources will be permitted to operate.
There should be a file called SdkCerts.cab which you need to install first.
Please note that the use of the SDK certificates will pose a security risk to your system.
Regards
MichaelG
I've got an XDA Mini, but installed using the corporate install - no O2 rubbish.
I used the registry hack to change the dialpad back to the original WM5 one, but now the smartdialler thing won't work. I've changed back to the O2 one and it works again.
Any suggestions to get smartdialler working with the WM5 dialpad?
Cheers.
The extended Rom contains additional configuration and registry settings as a CAB. I reset mine without the O2 stuff then ran Smartdialing_enable_0915_signed.CAB from the extended rom directory. Restart the device after that and you've got the smart dialler back (well thats how it worked for me anyway!).
Does not work. It is possible more in detail?
I think will not work!
I Have a T-Mobile MDA Vario, chnge registry too because don't like T-Mobile Dialer skin, and smartdialer not work anymore... same as bsterngillet.
Now I change ROM to Qtek and work dialer and smartdialer WM5 default... and is much light = speed!
artirm said:
Does not work. It is possible more in detail?
Click to expand...
Click to collapse
When you say not working, do you mean the .CAB file is not there or that nothing happens when you run it?
If it isn't there I could post my copy to the internet but other than that I am only going on my experiences with UK ROM's I'm afraid! On another thread, user 'Plantagoo' has cleared up what the CAB files do more so it may be that your device does not have the smartdialler program (I'm just guessing here!).
Where to take Smart Dialing for Pocket PC ver. 2.2?
Hi people!
What cab file (if any) can i grab from the extended ROM to set up the GPRS settings for O2 XDA Mini S?
I have been entering them myself, just thought it would be nice if there was a cab file to do this as when i let the customising in 3 seconds run that sets up GPRS.
Hope u can help!
for witch operator?
faria said:
for witch operator?
Click to expand...
Click to collapse
O2
what gprs rom
This one works on my magician on O2 its form O2_UK_XDAIIs_140237 extended rom on the ftp. There is one on one of the imate jam roms that allows you to sellect any major network, sory tried the rom binned it cant remember which it was, got big storage now.
Would be handy to have a list of all the cabs for just each operator settings.
what gprs rom
This one works on my magician on O2 its form O2_UK_XDAIIs_140237 extended rom on the ftp. There is one on one of the imate jam roms that allows you to sellect any major network, sory tried the rom binned it cant remember which it was, got big storage now.
Would be handy to have a list of all the cabs for just each operator settings.
what gprs rom
This one works on my magician on O2 its form O2_UK_XDAIIs_140237 extended rom on the ftp. There is one on one of the imate jam roms that allows you to sellect any major network, sory tried the rom binned it cant remember which it was, got big storage now.
Would be handy to have a list of all the cabs for just each operator settings.
thanks uniqueboy, the settings in the cab you posted look spot on!
that would be a good idea if we could get all the settings in one post!
Thanks
8)
jt
o2 paygo
ho hell here is the whole bunch
UK_Jersey_Telecom
UK_O2_Contract
UK_O2_PAYG
UK_Vodafone_Contract
UK_Vodafone_PAYT
UK_T-Mobile
UK_Virgin
UK_Orange_Contract
UK_Orange_PAYG
I saw it on a post for Herald (http://forum.xda-developers.com/showthread.php?t=308773&post=3) and tried to install it on my 8125 but it doesn't work. The installation can run through. However no function is in effective.
Does anyone have more info about it? Can we make it work for Wizard?
I SECOND that request how the heck is this suppose to work i have been trying to use it on my 8525?
its an app u run from the programs menu, looks like a small mixing board if im not mistaken.... just helps to kick more life out of the phones speakers....
im not sure what went wrong with yalls installation, works just fine on my mda, thought its only a small improvement
it installs but it does not work it maybe the sound chip on the mda is different correct me if im wrong
the greyzter said:
its an app u run from the programs menu, looks like a small mixing board if im not mistaken.... just helps to kick more life out of the phones speakers....
im not sure what went wrong with yalls installation, works just fine on my mda, thought its only a small improvement
Click to expand...
Click to collapse
Hi, Greyzter: you are the only one that reported it work on a Wizard. Could you kindly list some details about your device such as hardware version, OS, etc. so we can compare? I have a Cingular 8125 (Wiza100, G3) with NBD 7.1 ROM (WM6).
The installation is fine. Some noticable things include 1) change media manager theme, 2) cannot toggle "equalizer" and 3) no effect when selecting any preset or change the sliding bars.
ultraprimeomega said:
it installs but it does not work it maybe the sound chip on the mda is different correct me if im wrong
Click to expand...
Click to collapse
That is what I am thinking as well. If this is the case, it won't work unless some one can work out correct driver.
The bottom line is: we need an equalizer for playing music but neither WMM nor Htc Media Manager has one built-in. Install another media player would be the only way to go but it is not preferred.
so the bottom line is htc audio booster is not compatible to wizrd or hermes?
clia said:
Hi, Greyzter: you are the only one that reported it work on a Wizard. Could you kindly list some details about your device such as hardware version, OS, etc. so we can compare? I have a Cingular 8125 (Wiza100, G3) with NBD 7.1 ROM (WM6).
heres the specs on my not so uber phone....
WM5, original T-Mo 2.26 rom ( i know, i suck, just scared i may brick my phone), g3
wiza200
cpu - omap850
195mhz ( whats a safe way to overclock??)
rom- 2.26.10.2
radio - 2.25.11
ext rom - 2.26.10.105
i hope that was enuf info to give u some clues and insights.
as far as the program, i did nothing fancy, just installed the cab file str8 from my mini sd card.
Click to expand...
Click to collapse
T-Mobile Wing Users (aka HTC Herald) would like to know also . . .
If this HTC Audio booster app will work, please PM me and let me know or just respond here if anyone gets this working successfully, and what must be done to make it work.
Thanks.
This program is already made for the herald, wizard and hermes users are trying to get it to work for theirs, here is link to the thread:
scroll down a bit to find the cabs in post #3.
http://forum.xda-developers.com/showthread.php?t=308773&highlight=htc+audio+booster
Hey guys, i've been using the DXM MusicID on my 8525 for a while now (great program btw thanks to everyone who made it accessible to us) on the TNT 19199 build but i recently updated to a new rom Build 19400 ROM from Dvha79_ddt (www.pdaviet.net). DXM MusicID used to work with me over the tmobile proxy 5.99 plan, but now that ive updated, it doesnt work over Edge. It works fine over WiFi, so i don't think its a problem with the program itself. I also cant seem to get the HTC Home proxy hack for tmobile to work either, it just makes the entire home plugin disappear completly, i dont know if thats related or not but i thought id just put it out there.
bump.............