Related
Today I unlocked my 9100 and a friend's MDA VARIO. On both I put the KJAM ROM. Works like a charm. Thanks for all the good info I found here.
A few questions.
I have enabled the Extended ROM on my 9100 and saw that the KJAM also put it's own files there. The original ER had also a config file. I didn't see it in the KJAM rom. Does this mean that I can put all my favourite files there without editing a config?
Like to put mobipocket, resco's sudoku and spb's pocket plus there. Maybe also the disable certificate cab. What about serials? Is it possible to automagically have them registered there?
Is there a softphone/SIP proggy out there? Using at home a SIPURA 1001 for SIPDiscount/Voipbuster/Budgetphone. Would be fun that I could call for free with my QTEK9100 on every open Wireless Network.
To all.. Have a very prosperous 2006!
For VoIP I am using sjphone. Works quite good. You can get it here: http://www.sjlabs.com/sjp.html
I am using the 2003 version.
Thanks for putting me in the right direction. Installed SJPhone today, and already made my first phonecalls with it connected to SIPDiscount. Also made a setting for Budgetphone.NL. The idea was to get called on a normal local fixed line with it. Have it working till the part the phone rings. But with SJPhone I can't seem to pick up the line.
All,
when I stream from mycast.orb.nl and try to open a playlist or a file I get: "This protected file type is not supported on this device, and will not be downloaded."
Any suggestions?
I have allready installed TCMP.....but it won't help, I'm on the latest 2.05 test WWE rom.....
same here....
Yep, me too.
It happens for all videos and music that I've tried to stream (WindowsMedia.com, for example). Haven't actually tried any locally stored files, 'cause all my music is in .ogg format, and they seem to work in Pocket Player.
I've gone back to the 2.3 ROM for now. I did condider using the Swedish AKU3.3 ROM with the English patch, but I can't be bothered with the hassle for now, and the AKU3.3 upgrade wasn't so amazing, so I'm happy to wait for a final HTC version...
Orb is working fine with the 2.06 Cingular ROM. Sorry I don't have an an answer for you
Good to know that the Cingular ROM is ok, I guessed that it was a problem specific to this ROM. I'm looking forward to seeing a fully functioning 3.3 ROM without all the extra bloat now then...
sub69 said:
Good to know that the Cingular ROM is ok, I guessed that it was a problem specific to this ROM. I'm looking forward to seeing a fully functioning 3.3 ROM without all the extra bloat now then...
Click to expand...
Click to collapse
Same here, thanks, I will flash the SA rom....and hope for a good AKU 3.3.....
URPREY said:
Orb is working fine with the 2.06 Cingular ROM. Sorry I don't have an an answer for you
Click to expand...
Click to collapse
Did you remove the cingular proxies? because mine wouldn't stream from orb or others (cnn, bbc, etc.) without doing the reg hack disabling the proxies.
fone_fanatic said:
Did you remove the cingular proxies? because mine wouldn't stream from orb or others (cnn, bbc, etc.) without doing the reg hack disabling the proxies.
Click to expand...
Click to collapse
No, I changed nothing.
using cingular rom as well, works great on wifi connection and gprs/3g connection, no editing of settings needed, other than switching what connection to use so it connects correctly to either wifi or gprs.
you need to get rid of that rom the 2.5 one.... i had the same problems with all that.. i changed it to the cingular 2.6 one and perfect it works... the only problem i am having is when i download videos off the internet it does not give me the option of where to save it to.. i want to save it to my SD card but idk how to change it?
any update ?
This must be a PIE configuration (registry) issue, right ? The behavior reminds me of a "system policy" on desktop windows.
Minimo can download the .asx file fine; PIE instead displays the dialog:
-----------------------------------------
File Download
-----------------------------------------
This protected file type is not
supported on this device, and will
not be downloaded.
OK
-----------------------------------------
I payed $40 for this program and it was working fine on the stock WM6 rom that came with the T-Mobile Wing.
Now, on the touch it 2.3 rom it installs and connects fine but there is no text box. I've tried a dozens times reinstalli and nothing seems to work... any ideas anyone?
Reinstall your stock rom, there is stock T-Mobile RUU floating around...If you look in the "customizing" group, you can find a standalone plugins (cube,home plug cabs) you can install on top of your stock rom. Looks just like Touch-it minus some apps that come with touch it.
I would do the page pool mod on the stock rom. I am running a stock rom on my wing with page pool mod and the home plug. It rums perfect. I had lots of bugs on my phone as well with the touch it, like they say "Every install is a differant one on a phone"
So, some people might have bugs and some might not have any...
also uninstall the OZ client,,that crap wont quit after its started!
Plus other useless apps.
MY IM+ runs perfect, the only problem is this new version does not want to work with the proxy settings. I need to find the older version!
Are you running proxy? If yes, what version IM+ are u using?
goodluck.
Did you run the Network Wizard config tool to set up your internet connections etc...? If your phone isn't configured to connect to the internet, nothing that uses internet will work.
megaman81 said:
Reinstall your stock rom, there is stock T-Mobile RUU floating around...If you look in the "customizing" group, you can find a standalone plugins (cube,home plug cabs) you can install on top of your stock rom. Looks just like Touch-it minus some apps that come with touch it.
I would do the page pool mod on the stock rom. I am running a stock rom on my wing with page pool mod and the home plug. It rums perfect. I had lots of bugs on my phone as well with the touch it, like they say "Every install is a differant one on a phone"
So, some people might have bugs and some might not have any...
also uninstall the OZ client,,that crap wont quit after its started!
Plus other useless apps.
MY IM+ runs perfect, the only problem is this new version does not want to work with the proxy settings. I need to find the older version!
Are you running proxy? If yes, what version IM+ are u using?
goodluck.
Click to expand...
Click to collapse
i'm using 4.22... and also can you direct me to the customizing group? thanks
http://forum.xda-developers.com/forumdisplay.php?f=260
Hmm... I installed the official USA RUU T-Mobile ROM onto my wing... MY IM+ now works but it is very nnoticably slower then the touch it rom.
i wish there was a way around this so I can use IM+ on the touch it rom
do the following on your stock rom
4mb page pool
over clock to 260mhz using battery status
i had the same problem, i switched to Agile Messenger and it works perfectly
here's your answer: Palringo
EP3hatch03 said:
i had the same problem, i switched to Agile Messenger and it works perfectly
Click to expand...
Click to collapse
does agile messanger work with Tmobile proxy?
megaman81 said:
does agile messanger work with Tmobile proxy?
Click to expand...
Click to collapse
i second that notion lol.
OK BeeJive has released Jivetalk (alpha) for WinMo6.x pro devices
It is truly a marvel on my Hermes(Cingy 8525)
Heres my issue I cannot get it to run for the life of my on my Herald(tmo wing)
I have tried several roms and it wont work
Open Touch, Touch-IT, and another i cant remember at this time
I want some other Wing users to see if they have the same issue also
Also I will post some screenshots to make your mouth water!!
yeah i have open touch 4.0 lite and it doesn't work, fails to startup. when i had the original tmobile rom on my wing, it worked.
The JiveTalk cab of yours work perfectly on my O2 terra, a Herald variant.
Used to use Palringo until today but JiveTalk seems to take over that place, thanks btw
I checked out the Jive site and there you could make a HTC P4350 and a T-Mobile Wing selection.
I'm not sure if this is just a marketing questionaire or a hardware id related question field.
Which version did you pick?
When I login to various IM networks the status messages is "On HTC P4350",
my assumption is that it could be hardware related.
Try if selecting the Wing version makes a differences if not try to use JiveTalk over WiFi,
because your mobile carrier might block the appropriate port via proxy.
CONFIRMED
ultraman69 said:
yeah i have open touch 4.0 lite and it doesn't work, fails to startup. when i had the original tmobile rom on my wing, it worked.
Click to expand...
Click to collapse
FLASHED BACK TO TMO ORIGINAL (on my HERALD)
And it worked like a charm
This app is tht HOTT to me
I cant understand why it wouldnt work with the custom roms though
Make a ROM cooker cn shed some light on that
PS: Your Welcome Gambit.
I figure get it while its free!! because one day it will cost $
Im keeping a copy of every version, but i believe on first startup it will authenticate to jivetalks server first so that maybe frivolous
UPDATE
Now WORKING on Binky11's v3.3 ROM (On my Hermes) ALSO!!!
VP3Gv3.62 WORKING
Working on Vp3G 3.62 Hermes ROM!!!
looks like v 0.5.2.13 is out, it is still not working for me on ot4 lite. getting a typeloadexception, anyone have any ideas?
ultraman69 said:
looks like v 0.5.2.13 is out, it is still not working for me on ot4 lite. getting a typeloadexception, anyone have any ideas?
Click to expand...
Click to collapse
The roms it doesnt work on are because they do not have SQLCE cooked in
Must be "cooked in" for jivetalk to work
Works on all Binky11's ROMS and all vp3G's as well
SQLCE and .NET CF are both required for JiveTalk to work.
I haven't managed to get Jivetalk to work on my phone, after trying to install everything... still errors every time...
duprade said:
SQLCE and .NET CF are both required for JiveTalk to work.
I haven't managed to get Jivetalk to work on my phone, after trying to install everything... still errors every time...
Click to expand...
Click to collapse
Same here. Got .NET CF 2.0, 3.5 and SQL CE installed and still no luck.
Itje's 7.1 ROM was the the last ROM JiveTalk could run properly.
Anybody know how to enable the today plugin for the newest JiveTalk? It's not under start>settings>today>items.
you have to download it separately. after you do that and install it will show up where the normal today plugins show up in that list. it shows up for me.
does anyone know where it saves logs? or how to delete them? i think they are taking up a lot of my memory, i only have 3.2MB left and i am not putting ANYTHING on my phone and cleartemp clears like 500KB
Care to show me the download for the today plugin because it's nowhere to be seen on there site =O?
i couldn't begin to tell you where it is. the only reason i know about it is because when i updated it told me i can either edit a css file (or something) to have it work or install the cab that will automatically add it.
just checked, i don't have the cab anymore.
has anyone gotten it to work with cooked roms?? im using heralds serg's rom?? thanks guys!!
I went back to the OEM and got the today plug-in back. It is working fine on my ROM (for the Kaiser).
i emailed bee jive people and they told me it should work on custom ROMs.
however, i have a tmo wing running on papa black diamond but it doesnt work however many times i tried it. i used to have it on my blackberry and it is really the best messaging software out there
**EDIT - i found a solution to the problem.. follow instructions and install the following from this topic:
http://forum.xda-developers.com/showthread.php?t=370772
Unbelievable...
thanks cbbplanet, I never thought I would ever see JiveTalk running on Papamopps' ROM.
I know it runs out of the box on Itje's, ICP's and tttrans's ROMs, but i never got it to work on this one.
Perfect, you made my day
cbbplanet said:
i emailed bee jive people and they told me it should work on custom ROMs.
however, i have a tmo wing running on papa black diamond but it doesnt work however many times i tried it. i used to have it on my blackberry and it is really the best messaging software out there
**EDIT - i found a solution to the problem.. follow instructions and install the following from this topic:
http://forum.xda-developers.com/showthread.php?t=370772
Click to expand...
Click to collapse
NIIIICE
Alas we have upgraded to KAISER's
But good to know !!
Anyone know how to make it work with tzones proxy?
smanzor88 said:
has anyone gotten it to work with cooked roms?? im using heralds serg's rom?? thanks guys!!
Click to expand...
Click to collapse
Works fine on mine, using opentouch 5.1
I have been playing with it for a day or so. it will only send pictures, dont know about videos dont have any. sent dozens of pictures so far so good. i will load a video when i get off of work. also the cab file. have dcd 3.3.4 on my mogul
I also have a mogul. Are you using wm6.1?
Thanks...
yes 6.1 latest dcd rom...trying to load the cab file
Sweet! Will it work on the Vogue?
here is the cab i used let me know if it works for you guys...the only "problem" i found was to access my messaging on my mogul i have to press the messaging button several times before the app comes up!
where's the cab?
can someone upload it for me cant upload from my phone...still at work ill email it to someone if they can upload for me. thanks!
Hey all,
I covered this a while ago - my first post HERE at PPCGeeks has everything you need to get this working on Sprint.
The issue now is trying to get it to work with the 5.x version of Arcsoft MMS.
Later,
Matt!