When i start IGO With bluetooth on, it wont find automatically or something so how get it work :$
Related
Suddenly, my bluetooth gps does not work. When I use GPSInfo application, and I do the COLD Start, it just display :
$PSRF
...OK
The Magician can detect the gps device, but cant gather any gps info anymore.
It is globalsat BT-338
Please help.
Hi Gogol,
I have the same globalsat BT-338 and i experience the same problem, The only way around this was to delete the Bluetooth pairing and re-pair them. I dont use the GPSInfo application but use TomTom5 and have to do the above most times i want to use the sat nav. Pain really
Nogs
Before anyone says anything, yes I have tried looking.....
I have a problem with TT5.21 where I can connect to the BT GPS several times but then all of a sudden TT won't connect again. The only way I can do it is to delete the pairing with the GPS reciever and re-pair it setting up the COM ports again. It will then work fine 3 or 4 more times and I have to do it again.
I know the GPS works fine as it works perfect on my Alpine (believe it or not).
Has anyone any ideas?
Thanks in advance.
Yes, I have this problem too, no set times or obvious reasons as to why tomtom loses gps, still appears in bluetooth device list, but tomtom cannot see it, only way to get tomtom to recognise the gps is to delete pairing and re-pair gps.
Eventually figured it out. When setting up the initial pairing (or was it com port), I cleared the use secure connection radio box and it seems to be fine now.
Thanks for your response though and I hope this works for you too.
Is it possible to use both TomTom (with a bluetooth GPS node) and a bluetooth headset at the same time?
I've managed to do it although that was on an old O2 ROM, not the new one.
Hi All,
I'm running the new Rom for a week now and i'm very happy with it.
Although I my Jamin has reset itself once or twice my SD card never dissappeard.
There's a new problem I'm having:
When I start TomTom 5.21 my GPS (Adapt) and activate my bluethoot GPS TomTom keeps telling me there's no GPS..
When I delete the partnership from the Bluetooth settings, then create a new partnership.. it says BT GPS wants to connect, and I have to enter the pin. After This my GPS is working again.. Untill I power of my GPS.
Anyone had the same experience.. or even better... the solution?
Thanks.
Hi , I'm running Copilot and noot had any issue. i no longer use TomTom due to their incompatability. It always seems you have to have an update with every new device with them.
Not very helpful I know but I would hazard a guess its due to TomTom and not your upgrade.
I have an adapt (ad-700) receiver and do not have any problem. I always start the gps device first and then tomtom (tomtom activates bluetooth by itself).
I also get the message "no device" but after 10 seconds or so it finds the gps mouse.
Thank you all. Tried reinstalling TomTom.. after some a couple of try's it worked finally. Thank you for the response.
Hi,
I have recently got an O2 XDA Mini S, and I have TomTom 6 installed I have a generic non-TomTom Bluetooth GPS receiver (BT 77) which I got from eBay this works fine with my PDA.
The only problem I have had with it from day one is that I have pair my Bluetooth GPS each time that I use it. If I don't TomTom doesn't seem to detect it. E.g. go to Setting -> Connections -> Bluetooth then delete BT GPS, then I have to search for Bluetooth devices add it again and setup the ports each time I want to use TomTom. Then TomTom will pick it up.
Is this normal? Having to delete my GPS device and then add it again to be able to use it? I normally wait until my GPS has a lock on the satellites before opening TomTom.
Any suggestions on how I get my GPS setup permanently?
I have TT6 and TT's own receiver with Qtek 9100...works fine, pair it once and that's it.
Hi
Are you entering the four digit security code when asked ?. Mine did this till I got the code from the web site for my receiver.
Hope this helps
---------------------------
Mda Vario
T-Mobile
TomTom 6
[email protected] said:
Hi
Are you entering the four digit security code when asked ?. Mine did this till I got the code from the web site for my receiver.
Hope this helps
Click to expand...
Click to collapse
I think you will find that the code you will need is 2003, but you maybe have to check the web site too!
[email protected] said:
Hi
Are you entering the four digit security code when asked ?. Mine did this till I got the code from the web site for my receiver.
Hope this helps
Click to expand...
Click to collapse
The code in the guide that came with my GPS was 0000 and this works fine when I have to pair my GPS up, which you normally only have to do once.
I think I solved the problem though. Normally I have Bluetooth off and then tapping on TomTom would load up and then TomTom would automatically fire up Bluetooth for me. While it looked like TomTom was running Bluetooth fine it wouldn't actually detect my GPS.
Turning on Bluetooth before running TomTom seems to do the trick as it will detect it within about 7 seconds. Must just be a bug on Windows Mobile 5 or TomTom 6.
sebastianf said:
The code in the guide that came with my GPS was 0000 and this works fine when I have to pair my GPS up, which you normally only have to do once.
I think I solved the problem though. Normally I have Bluetooth off and then tapping on TomTom would load up and then TomTom would automatically fire up Bluetooth for me. While it looked like TomTom was running Bluetooth fine it wouldn't actually detect my GPS.
Turning on Bluetooth before running TomTom seems to do the trick as it will detect it within about 7 seconds. Must just be a bug on Windows Mobile 5 or TomTom 6.
Click to expand...
Click to collapse
Well ok that is wierd cus it, i just start up tomtom and then select the gps and it works find!!! but i guess different with different gps units!!! but good to see that it is working for you now!
I have the same GPS unit as you and I don't have the issue you describe. If I manually enable Bluetooth before starting TomTom 6 it works, if I don't manually enable BT and then start TomTom 6, BT is started by TT6 and it still works. It probably takes a few seconds longer but it still connects quite quickly.
I have TT6 configured for 'Other BT GPS' on Com6. Com 6 appears as 'BT GPS' and is unsecured.
Andy
In the Bluetooth settings area for your GPS, make sure the "Secure Connection" box is NOT ticked. This should sort you out.
Ok so I have upgraded from my old herms to a Touch Pro, however I cant let go of my hermes was an awsome phone.
I want to use it for a dedicated GPS. I have tom tom 6 installed and a BT GPS reciver all which work perfectly when the phone is turned on (sim card inserted) but when the phone is turned off from comm manager or the sim card is removed the GPS wont lock on for whatever reason.... this is crazy as BT on the phone seems to work fine I can pair it with the BT GPS reciver but wont lock on. As soon as the phone is on bang gets a lock and it all works as it should.
Is there any way around this?