Suddenly, my bluetooth gps does not work. When I use GPSInfo application, and I do the COLD Start, it just display :
$PSRF
...OK
The Magician can detect the gps device, but cant gather any gps info anymore.
It is globalsat BT-338
Please help.
Hi Gogol,
I have the same globalsat BT-338 and i experience the same problem, The only way around this was to delete the Bluetooth pairing and re-pair them. I dont use the GPSInfo application but use TomTom5 and have to do the above most times i want to use the sat nav. Pain really
Nogs
Related
I have an Qtek S100 and an Leadtek 9537 gps reciever, worked good with bt and all first times, but now i cant get any satelites, TOMTOM says im not connected to any satelites and tomtom gps shows the same only stands try to connect, but nothings happening what to do please help, i have hard resetted and installed everything again and even take away the battery with same result BT connection work fine, but not connected btw the reciever and satelites. Is it broken????
Hi,
I'n bought an Oasis Bluetooth GPS Reciever. Is paired it with my Universal according to the tomtom install guide find on this site.
Unfortunately I cant get the dahm thing to work.
Tomtom keeps saying: No Usable signal.
Anyone got an Idea?
thnx
Hy guys,
I have a QYEC WIZA 200 and I have installed a TTN 5.21 with WM5.
I have paired the GPS BT into the BT connection and put it on the COM6 with secure connection. It looks it is paired.
Once I go on the TTN menu I select other BT GPS then choice com6 but no connection. It looks that TTN5 doesn't see the GPS.
Any idea how to solve the problem ???
Many thanks
MIKA
TT5 and BT GPS
What's the name of your BT GPS - when it has been identified?
It MUST end in GPS...
Charlie Grillo
I use BT-GPS 338 with sirf star III. It is strange that the PDA but a question mark ? before the name of GPS BT. It is like it cannot understand what kind of device it is.
The GPS BT instruction says to set up the connection speed to 38400 but I do not know where to set up this.....
Thanks
Hi
Ok - installed TomTom6
First of all I removed TomTom 5, rebooted and then installed TomTom 6 as per this site:
http://ppcwarez.org/index.php
Ok - so all went well, installed inc UK map fine.
Isue is the Blutooth. I have a BT GPS. So I removed it, repaired it, entered access key of 0000, gave Outgoing com port as 6. Started TomTom , configured GPS to use another Bluetooth GPS receiver, selected com6 and they found each other. The issue is when I turn off the BT GPS unit and the restart it, TomTom wont find it the GPS unit. I have to remove it from the Bluetooth setting on the OS and repair - with the ley being the code of 0000
If I try and pair the TomTom with the TomTom Blueotth GPS reciever - it has the key symbol with 0000 in - but it wont pair. Now, this seems to have been carried over from the previous installation. Can I remove they key for this device - as this may work?
Any ideas?
Scott
i have the same bt gps you need to delete the bt partenship and call it gps only instead of bt gps that should work
Hi!
I have the same problem. Tried to rename to gps, but no luck.
Every time I turn off the Bluetooth GPS, I have to delete the partnership, redo the partnership, assign an outgoing COM port, and then finally tomtom6 sees the bluetooth gps again .....
Any clues?
Thanks.
I would appreciate any help offered,
I have searched the threads but have not found much applicable
My problem is that I cannot get My Universal to talk consistantly to the Rikaline 6033 GPS the BT link will not stay up.
I am using a T-Mobile Universal with the excelent
JASJAR_WWE_19096_19505_11300_AKU_3_2_ship Rom
The only way I have found of getting the GPS to talk to the Universal BT
is to install "Virtual Earth Mobile",
get it to pair with the Rikaline GPS
and then run TOMTOM 6
TT 6 will then recognise the GPS on COM0
Every time I switch it off and back on I loose the conection and have to go through the whole rigmarole to get it to go again.
I have tried opening the other comms with WM5GPSfix but it doesn't seem to help
If someone has managed it and can let me know I would be very grateful
TIA
A side issue,
What is the reason that the first connection with AS 4.2 takes so long?
Thanks