Accidently Format the ROM! NEED HELP! - JAMin, XDA Neo, S200 General

I did a stupid thing today, while I was trying to partition the SD Card I accidetly partition and formated the ROM and now My Dopod 818 Pro is stuck!
Is there a way to repartition back and install the ROM back to what it was?
I have tried to recorver back the ROM but i just don't show the device at the Administrative Tools.
Please Help!

Solved!
I did it!
been trying some roms and initially it dosn't work, then later I saw the thread FLASHING TOOL For all nk.nbf (WM6.1), 3 color bootup? SOLUTIONS read post 1......... and decided to try it after removing the battery and the sim card and it works..!
This thus teach me a lesson!
hope that this will also help those who have this similar problem!
Thank to dioxda2

Related

Flashing through SD

Hi all,
I just my very first PDA a HTC 3300. The thing is it has a portuguese ROM and I would like to install a English ROM. It is CID/Network locked and i tried flashing it via the SD method but with out results.
When I do the bootloader sequence I get a white screen saying checking SD contents and then it goes straight to the 3 colored screen not showing me the screen that is in the wiki site. Can anyone help me with this beginners problem.
Thanks a lot,
FreakyFreak
if is cid locked dont try 2 flash,U'll only brick ur device.buy unlock code from imei-check its worth it
Thanks. I did just that. It was quick and easy. And I've already flashed my device with the original HTC ROM. But I don't like it that much. Do you have any suggestion on which one to flash. I don't want any useless programs and the gps programs to be intalled. I got my own gsp prog that I want to use.
Thanks,
FreakyFreak
i use dopod shipp
Didn't I read somewhere that Dopod will lock the pda again? Could you clear this for me.
Thanks,
FreakyFreak
any solution????
FreakyFreak said:
Hi all,
I just my very first PDA a HTC 3300. The thing is it has a portuguese ROM and I would like to install a English ROM. It is CID/Network locked and i tried flashing it via the SD method but with out results.
When I do the bootloader sequence I get a white screen saying checking SD contents and then it goes straight to the 3 colored screen not showing me the screen that is in the wiki site. Can anyone help me with this beginners problem.
Thanks a lot,
FreakyFreak
Click to expand...
Click to collapse
has any one got the solution to that...? a have O2 Orbit that boots only to the HTC logo with the ROM version...IPL.....and SPL I`v tried to flash from the memory card but it does exactly the same as above. Can someone give a solution coz I`v tried with a working "Artemis" (i don`t know if it is CID/locked) but it is a working device,and the result is exactly the same,it shows "checking SD contents" and goes to the colored boot screen.
savich said:
has any one got the solution to that...? a have O2 Orbit that boots only to the HTC logo with the ROM version...IPL.....and SPL I`v tried to flash from the memory card but it does exactly the same as above. Can someone give a solution coz I`v tried with a working "Artemis" (i don`t know if it is CID/locked) but it is a working device,and the result is exactly the same,it shows "checking SD contents" and goes to the colored boot screen.
Click to expand...
Click to collapse
You tried to Formatting in FAT32?Please did it before.
no luck...
joke_drummer said:
You tried to Formatting in FAT32?Please did it before.
Click to expand...
Click to collapse
Yes I did...same thing...maybe we are missing some kind a file,to tell the Arteimg.nbh to start loading.....
you will not be able to flash from sd card.
to flash from sd card you need a specific service card. when this card is inserted, you can flash from the card.
with uspl, flashing from sd card is not supported.
regards,
thanx
fdp24 said:
you will not be able to flash from sd card.
to flash from sd card you need a specific service card. when this card is inserted, you can flash from the card.
with uspl, flashing from sd card is not supported.
regards,
Click to expand...
Click to collapse
...I thought so, well......if someone comes up with the solution,please post it. Thanx !!!
fdp24 said:
you will not be able to flash from sd card.
to flash from sd card you need a specific service card. when this card is inserted, you can flash from the card.
with uspl, flashing from sd card is not supported.
regards,
Click to expand...
Click to collapse
Not true, i succesfully flashed several times o2 wm6ship. ROM thru SD(ordinary 2GB, not even cleaned-only ARTEIMG.nbh in root). But it must be original operators ROM. Cannot be cooked rom or from diff. operator.
you right, except original rom for device. meaning correct model id and cid.
regards,
phsnake said:
Not true, i succesfully flashed several times o2 wm6ship. ROM thru SD(ordinary 2GB, not even cleaned-only ARTEIMG.nbh in root). But it must be original operators ROM. Cannot be cooked rom or from diff. operator.
Click to expand...
Click to collapse

Upgrade problems

Hi all !
I have a CID-unlocked Artemis.
Tried to flash O2 English WM6 ROM today.
Now i'm stucked on boot screen.
Is it possible to perform a reflash via BootLoader ?
SD method did not work. I copied the ARTEIMG.NBH file to SD, but bootloader does not see it.
Anybody can help ?
Try this link this may help you
http://forum.xda-developers.com/showthread.php?t=311447&highlight=MTTy
If you are sure that the phone is CID unlocked, you should be able to download any rom's from any of the network operators and reload it from the bootloader. then you can try to upgrade WM6 again
In order to SD Flashing your SD card must be formated at FAT32
Pocha said:
In order to SD Flashing your SD card must be formated at FAT32
Click to expand...
Click to collapse
I'm really a stupid one ! Thanx ! I've tried with FAT16....

HTC 3300 wrong ROM upgrade,,no display,,pls HELP

i have made a mistake
have tried to upgrade my T-MOBILE MDA COMPACT III(aka htc p3300) with the HTC TOUCH ROM
it started to upgrade and an error occured
then i have lost the display and all
when i connect it to my laptop using USB i hear a beep in my computer but active syn didnt find any device
i have downloaded the correct rom version from T-Mobile but it doesnt seem to work
i dont know what to do now..please help me it has to be recovered
there must be some way pls pls anyone help me to get my working phone back
will appreciate your concern
thanks
Regards
Faraz Feroz
as i said on the other post
well you have to get the original ROM for your device.. see their website.. it should be there for free. or try to get it from anyplace.. (the original rom)
and then flash it using SD Card flashing
info for flashing it by that are here:
http://wiki.xda-developers.com/index..._Card_Flashing
hope it will work
i think you can get it from here
http://www.tm-phonedownloads.com/sd_compact3.html
if WM6 did not work.. try WM5
thanks i m downloading it...but tell me one thing if there is a software issue then why isnt ther any display i mean no backlight no display no charging led
having same problem with both WM5 and WM6 upgrades!!
"error occur : invalid update tool
this update cannot be used for your pda phone, please get newer update utility"
i think that becuase the bootloader , ISP or one of these stuff are corrupted.. don't know.
and as i told once i got my artemis completely dead
and finally i got it fixed by putting the ARTEIMG.nbh in SD card as they said in the wiki and then by pressing the camera button and the power.
and it started flashing it as the SD card flashing but it took about 30 mins .. and there was three phases in the flashing progress which it was the first time i see.
having same problem with both WM5 and WM6 upgrades!!
"error occur : invalid update tool
this update cannot be used for your pda phone, please get newer update utility"
Click to expand...
Click to collapse
did you flashed it by SD card or RUU?
if you used RUU try by SD card flashing
did u get the same prob? i mean the phone seems to be dead? if so...there is a hope then
well...i used RUU simply downloaded it and tried to install by setup,,, dont know about card flashing but will try
where can i find that NBH file?
do u have that .NBH file?
you have to extract the file you using a program like winrar
there will be few files.. one of them is the nbh
that's how i got the nbh file.
and about the SD card flashing is here...
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing

Updating XDA Orbit

Hey Guys!! I hope, you can help me...
I want to install a other ROM on my Orbit. But it allways brake up at 3%. So, i thought, maybe it would help to install the original ROM. Ok, now i've got the oooooold original WM6. wow...
I want to install a version of 6.5, but everytime it stops at 3% with the notice, that my ruu is corrupted (Error [270]).
So i tried to flash via SD-Card. Renamed the ROM from RUU_Signed.nbh to ARTEIMG.nbh but sometimes the orbit means, that the ROM isnt certificated but mostly the Orbit cant find anything.
So, please help me
Hi there,
I used to have a similar problem every time I tried with WM 6.1 till yesteray.
The solution I found was,
Use USPL (http://forum.xda-developers.com/showthread.php?t=311403&page=69)
Before you start USPL, be sure to remove SD card and SIM card from your phone and follow the procedure as in PDF there
Then flash whatever ROM you want to.

[Q] Help on bootloader

today i tried my own cooked ROM to flash from my kingston 4GB SD card.After 10 minutes i got message SD Update Failed! now my GENE is bricked.
My real problem is that my camera key isn't working hence it is not possible to go to bootloader.And also it is impossible to repair it.I have many experience flash ROMs but this time i need your help urgently.Please notify me if you have any other method to go to bootloader.I had put wince.nls in my ROM.
Thanks in advance
This forum is my last hope
can't go to bootloader?
what a tragedy!

Categories

Resources