HTC Shadow (T Mobile) and Active sync - MDA III, XDA III, PDA2k, 9090 ROM Development

I bought an HTC with WM 6.0 (Model T-Mobile Shadow) and connected to the PC via USB.
Installed Active X 4.5 ( from the MS website) and the connection works (I can transfer files)
However, after the synchronization with Outlook is working for about 30 seconds it cuts the process and shows Error Code 85010014.
I looked in The Internet and it seems a quite common problem with Windows Mobile.
Anyone can help please....

dan_eh said:
I bought an HTC with WM 6.0 (Model T-Mobile Shadow) and connected to the PC via USB.
Installed Active X 4.5 ( from the MS website) and the connection works (I can transfer files)
However, after the synchronization with Outlook is working for about 30 seconds it cuts the process and shows Error Code 85010014.
I looked in The Internet and it seems a quite common problem with Windows Mobile.
Anyone can help please....
Click to expand...
Click to collapse
This forum is specifically for Blue Angel.
Maybe you should post this request in the appropriate forum. Chances are better that you will receive an answer.

Related

Sync Problems with wizard and MS Active Sync 4.1

Hey guys,
Ok this sync is really bugging me, first it took me ages to work out why when i plugged it in the connection went green ina ctive sync and said connecting but wasnt working no matter how long i gave it - turns out it was a firewal problem,
but now when i plug in my wizard and the wizard says connecting under active sync but my computer active sync doesnt do anything, i tried switching usbs restarting both PC and Wizard to no avail, i know my PC is seeing somthing there because it says at first (when i plug into new USB port) found device etc etc, but then it installs it as a network connection and trys to aquire an IP/Network address from it!! that doesnt seem right to me!
Any advice would be great
Thanks
Nathan
hmm has anyone with a working active sync noticed if its installed as a network device for you? does the wizard work as a USB - GPRS modem? because that would explain that bit.
Thanks
Hmmm...
I'm gonna guess that no one is responding because you've basically said some things that lead everyone to believe you've not researched your device or problem before starting a new thread about issues that have been covered time and again.
First, by default Windows Mobile 5 (WM5) connects using the Network Connection method. If you want to use the old USB Serial connection your will need to upgrade to an AKU 2.2 or AKU 2.3 Rom.
Second, if you use the search function (see the top center of the screen) you will find numerous threads discussing several issues with ActiveSync.
Newbies are always welcome but you need to at least try to find your answers before just plopping donw a new thread.
Hi,
I did a search, and tried most of the suggestions, but i dont get this AKU2 thing? and couldnt find a deifnition.
but anyway im since broken the phone so thanks anyway guys
Check your vpn option and firewall option. If you using cisco vpn then uncheck "statefull firewall (always on)".

Vista Sync-ing with Outlook

Has any one got the above working ?
Whenever i run the setup program
C:\Windows\WindowsMobile\setup.exe
I get the message Windows Mobile Device Center Could not be installed because at leat one windows componebnt is missing
What do i do to fix this inorder to sync my phone with my pc ?
enclosed is a screen shot of device mgr
regards
mark
Strange, Mobile center is preinstalled on the Windows vista.
What version of vista are you using?
Have you tried to install activesync 4.5?
version of vista is BusinessN
I have not installed active sync 4.5 since microsoft are saying the the new product to use is Mobile device centre and active sync does not work
my phone is the Atom Exec
could try re-installing WMDC from the microsoft website http://www.microsoft.com/windowsmobile/devicecenter.mspx
Warning: This would require using the winows genuine advantage tool.
still does not work
Still dosn't even install?
Dissapointing. I was thinking how nice it was to be free of Activesync.
Has the Artmeins been connected to windows yet? did it attempt to recognise new device and install drivers?
On a side note it's nice that Microsoft put so much effort into improving their error messages. A windows component is missing eh? er which one!!!
PS. This may sound crazy, but have you attempted to connect the Artemis with it switched off. I allways had trouble connecting windows Mobile devices with them turned on, but never had same difficulties with the device in standby, I now do this automatically, so can't comment on if it happens still in Vista. The issue was that when on, often the device was not recognised.

Urgent help! uspl white screen active sync not connected

Hi
I have just run start_uspl.exe on my orbit 1, after following instructions re- soft reset.
Phone is showing white screen asdescribed in tutorial
PDA ROM update utility has opened on xp laptop.
Instructed to conect via active sync.
Active sync cannot find device.
I have not touched phone and do not want to brick it.
Any giidance would be appreciated.
Thanks Colink
I am also facing similar kind of problem...with my compact MDA III.
Hi
Non connection of active sync after running start_uspl.exe sorted.
The white screen on my Orbit and No Connection on Active Sync was not a problem and a phone switch off with soft reset took me back to normal use.
Solution for running start_uspl.exe and installing new ROM; variations from uspl instructions. (Found by searching this forum + interpretation)
Run start_uspl.exe as described. (dont worry that it jumps from 70% to 100%)
At white screen disconnect USB
don't close anything
Reconnect USB, wait until PC recognises USB device (no name)
active sync does not show connected - ignore this
double click the ruu application for the ROM you want to install
(or in the case of artemes touch 4.01 or 4.02) click step 2
start_uspl.exe dialogue will ask you to confirm 4 facts - click "I completed the steps ..." + next - even though active sync is NOT connected to phone
(It takes a little courage to ignore the non connection of active sync)
start_uspl.exe dialoge will show zero details for current rom - ignore this
Click update and follwow any other instructions
When windows desktop shows on Orbit, don't worry that it takes about 3 minutes before the "tap screen", to set up, message shows on orbit.
I have done this a few times, with different roms and it works fine (if a little nerve racking).
The only bad news is (and many on this forum will not like this) - the interface doesent 'touch' the iPhone - excuse the pun.
I am not an apple / ipod fan, but have been using my iPhone for 6 months, it has lots of silly negatives, but interface, email and browsing is 'the best' - in my humble opinion.
ColinK
its server side problem on al WM6.1
KB955741 A message stays in the Outbox, and the message is resent until it is deleted manually on Windows Mobile 6.1-based devices in an Exchange 2007 Service Pack 1 CAS proxying scenario
Few days ago I install UR5 on CAS, all users working throw CAS-to-CAS proxy works perfect!, UR5 Resolves white screen problem!

TD2 + Windows 7

Hi there everyone. I'm having some problems synchronizing my TD2 that I would really appretiate some help with.
I'm using a pretty vanilla TD2, retail with no significant changes. I was synchronizing it with Outlook 2003 on my previous PC with no problems what so ever. Now, i've moved across to Windows 7 (64bit Enterprise) and Office 2007, and I cannot for the life of me get it working.
I've tried a number of things, including changing over the "Enable faster data synchronizing" option under USB to PC connections, upgrading to the new WM6.5 rom, and even connecting via bluetooth - all in vain.
Does anyone have any idea as to whats going wrong, and how I can go about correcting it?
Thanks in advance for any help with this issue.
Make sure you have Windows Mobile Device Centre 6.1 installed as Active sync won't work with 7.
WMD Centre
Hi
I have Windows 7 64 bit and mine works better than Vista.
Go to this link:
http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/device-center-download.mspx
Download appropriate version (32bit or 64 bit). Install it. Then plug in your TD2. Make sure you see some sort of notification on your phone and your PC that it has picked up the device. Wait for any configuration to occur.
Go to Windows Update and check if you need to install any HTC Usb device driver. If so install that too.
Restart once all installed. Plug in your TD2 into computer and activate Windows Mobile Device Centre and follow the prompts.
Oh and open activesync on your TD2 and check you haven't more than the 2 partnerships otherwise this causes problems too.
Cheers
Aussie

[Q] active sync and internet connection setup.... pls help

boss, i am using following
1. device- htc hd2 , win mob6.5
rom- 1.66.415.9 wwe.
2. laptop- win xp with active sync 4.5.with a dsl connection.
i have been using the internet of my computer by active sync in my htc hd2. and everything was working very nicely. my hd2 have been connecting to laptop and the internet of laptop in a second and was very good. suddenly few days ago the htc weather stopped updating.
my data plan (sim) dont have any internet connection. i,some time use the wifi of my work place. from yesterday my phones few features got disrupted, like i can connect to active sync internet of my laptop and use-1.opera browser, 2.intenet explo. 3.google maps. 4.facebook for win mob. 5.spb tv 5.palringo.. without any problem
but i cant use 1.win. my phone, 2.marketplace 3.magic mobile currency converter 4.open market. when ever i try too connect them or start this applications, they replies could not establish a connection. check your internet connection.
i have been trying to fix it. i used all the methods i found in xda website, like active sync config, uninstall-install, active sync>file>connection>this com is connected to internrt. registry tweak to add d-word value allowLPS and all
on device i checked connection setup, kept my work connection in advanced setup, changed them did a lot of things. i updated the connection database of all operator also, but no result.
still all those application cant find any internet connection in my hd2, where as others are connecting nice and working well. i tried to uninstall and install those programmes in my device but no resolve
pls if you guys can help. i have been happy with this win mob, even people was telling lot of doubt about win mob, because i found out xda developer, which makes it worth to keep a win mob device in pocket.

Categories

Resources