Hi
I have just run start_uspl.exe on my orbit 1, after following instructions re- soft reset.
Phone is showing white screen asdescribed in tutorial
PDA ROM update utility has opened on xp laptop.
Instructed to conect via active sync.
Active sync cannot find device.
I have not touched phone and do not want to brick it.
Any giidance would be appreciated.
Thanks Colink
I am also facing similar kind of problem...with my compact MDA III.
Hi
Non connection of active sync after running start_uspl.exe sorted.
The white screen on my Orbit and No Connection on Active Sync was not a problem and a phone switch off with soft reset took me back to normal use.
Solution for running start_uspl.exe and installing new ROM; variations from uspl instructions. (Found by searching this forum + interpretation)
Run start_uspl.exe as described. (dont worry that it jumps from 70% to 100%)
At white screen disconnect USB
don't close anything
Reconnect USB, wait until PC recognises USB device (no name)
active sync does not show connected - ignore this
double click the ruu application for the ROM you want to install
(or in the case of artemes touch 4.01 or 4.02) click step 2
start_uspl.exe dialogue will ask you to confirm 4 facts - click "I completed the steps ..." + next - even though active sync is NOT connected to phone
(It takes a little courage to ignore the non connection of active sync)
start_uspl.exe dialoge will show zero details for current rom - ignore this
Click update and follwow any other instructions
When windows desktop shows on Orbit, don't worry that it takes about 3 minutes before the "tap screen", to set up, message shows on orbit.
I have done this a few times, with different roms and it works fine (if a little nerve racking).
The only bad news is (and many on this forum will not like this) - the interface doesent 'touch' the iPhone - excuse the pun.
I am not an apple / ipod fan, but have been using my iPhone for 6 months, it has lots of silly negatives, but interface, email and browsing is 'the best' - in my humble opinion.
ColinK
its server side problem on al WM6.1
KB955741 A message stays in the Outbox, and the message is resent until it is deleted manually on Windows Mobile 6.1-based devices in an Exchange 2007 Service Pack 1 CAS proxying scenario
Few days ago I install UR5 on CAS, all users working throw CAS-to-CAS proxy works perfect!, UR5 Resolves white screen problem!
Related
Hi all. Heard there's a newer version of ActiveSync on another thread. namely Activesync 4.1. Can anyone give any feedback confirming this (although I think it's still in Beta stage). If so, isn't it worth a try given the problems encountered on the Universal using just Activesync 4.0.
Someone must know!
Here's the link: http://forum.xda-developers.com/viewtopic.php?t=28535
Well I have it installed and I don't see anything different. Probably bug fixes. Won't harm to upgrade.
i have 4.1 running, dont know if its connected to the activesync on universal always restarting but i can only sync with pc if i have the universal powered off, then when plugging it in i see the orange power led kick in, 10secs ish later active sync will start,
if i plug in when switched on i get a error bubble on pc saying i have a malfunctioning device, power off and plug back in, wait a bit, i have a working syncing device. wierd!!!!
i only got usb1 on this lappy and my other has 2.0 had same problem, so i dont think its a usb problem
no bugs on my side
i installed 4.1, and it works like a charm on both pda2k and universal
mikeycollins13 said:
It took a while to work out, but here it is: Skype works fine as long Activesync is not on. In the old machines, AS would kick in and appear in the memory only after you sync'd. Here it comes up automatically, whether you sync or not. In fact, you should see Active sync running in the background virtually always.
Clicking on the memory you'll see its always on, you press stop, and Skype works for 5-10 minutes, until AS turns tiself back on.
Any fixes for this in the registry?
Click to expand...
Click to collapse
Great stuff Nabil! Now, can someone please check if there are still issues with ActiveSync causing problems with Skype? I would do it, but I don't have my Universal yet! Waiting on the MDA Pro or Exec.
I'm not entirely happy that Activesync is workig the way it was intended & as I was unable to get this confirmed from several forum members, I ventured out of Xda developers.com to seek confirmation of my doubts.
I ended up reading a review of the new Dell Axim X51v Pocket PC, which as you may or may not know, uses WM 5.0 (but less the phone side of things). Not exactly to my surprise, i found that even in non-phone PPC devices, Active sync is a bit of a cause for concern!
Read here: Review of Dell Axim x51v PPC (WM 5.0)
Windows Mobile 5: Not All is Golden
I won't delve too much into Windows Mobile 5 in this review, since I'm focusing on the X51v itself, but I found Windows Mobile 5 very painful in two ways when I was setting up and using the X51v. First, after a hard reset I connected the X51v to my PC and set up a new partnership. ActiveSync 4.0 has a different partnership wizard if you have a Windows Mobile 5 device, and it's quite intuitive. I entered my hosted Exchange account information, then watched as basically nothing happened. The X51v synchronized with my desktop PC, but coughed up an 0x85020006 error when the device tried to sync with the Exchange server. ActiveSync 4.0 removes the option for Internet passthrough - I assumed that meant it was automatic, but after fighting with Connection Manager on the X51v for 15 minutes I gave up and disconnected. I turned on WiFi, and the X51v saw my access point - I entered my WEP key, started ActiveSync, and clicked sync. It worked! Within a few minutes I had all my data on the X51v - but why wouldn't the synchronization work in the cradle? I have no idea, but it's a serious problem.
Later, I wanted to see if a particular ActiveSync bug had been fixed: I've always had the problem where, after a backup and restore, the Pocket PC has been unable to synchronize against the Exchange server again. Only a hard reset would allow the Pocket PC to sync again. On the X51v, I did a backup using the included application, then hard reset and a restore. I restore the device, then after a soft reset I noticed the date was wrong. No matter, I fixed it and started a sync session. Much to my delight, the sync actually started, which is sometime that wouldn't have happened under Windows Mobile 2003SE.
My delight turned to disbelief, then anger as I saw what ActiveSync was doing: it duplicated 900 contacts, 50 emails, and 6 months worth of appointments! No warning, no "Replace, Remove, or Combine" dialogue box, simply a duplication. It will take me hours to fix this manually, unless I can find a tool to remove duplicates. I have memories of such a tool, but at this point I haven't had time to track one down. Any suggestions for one that will work with Outlook 2003 and an Exchange server? I'm unsure as to whether this is a problem with Dell's backup application, or with ActiveSync. The bottom line is that in this instance Exchange ActiveSync remains broken after a restore - and I'd rather have it break completely then duplicate all my data, so from my point of view it's actually gotten worse. I didn't think that was even possible!
Suffice it to say that while Windows Mobile 5 brings with it several key advantages - persistent storage is amazingly helpful - my experience with it so far has been mixed (WMP 10 Mobile retains its horrible library functions), and I have no shortage of feedback for Microsoft at the MVP Summit coming up in a few weeks. Windows Mobile 5 feels like one step forward and two sideways.
End of this part of the review. Full Review here: http://www.pocketpcthoughts.com/articles.php?action=expand,43092&start=2
What do you guys think? I think quite a few problems Universal owners are experiencing will dissapear once MS fix their ActivShite application!
Had my XDA Exec for a week now and its great until I try and do any thing computer related.....
only managed to get it to sync once and that was just luck, sometimes even when active sync says not connected I can still explore but wont sync but this happened only a couple of times?
the message says:
CRITICAL COMMUNICATIONS SERVIES HAVE FAIL TO START, TRY RESETTING THE MOBILE DEVICE, AND CONNET AGAIN.
which i have done loads of time including hard resets!
I had none of these troubles with my ipaq!
Tried:
uninstalling active sync (NOW 4.1)
turning off firewall
soft resets
hard resets
rom update (luckly done it the one time it did sync)
Calling O2 - dead loss tried to get me to call a premium rate number!!
Tried Microsoft’s sync 4 help page - this is when i got it to work the once, i opened properties in networks and checked and uncheck the box's and just seamed to come to life didn’t change any thing??
Tried it since and nothing happens?? Must have some thing to do with this but no luck so far..............
The second problem is TomTom 5 put on sd card put in xda and and it fires up for one second then nothing? Does the same when I open from PDA?
Ahhhhhhhh! its driving me crazy!!!!
sorry to go on but I desperately need help as don’t want to send it back?
Sorry also am I correct in saying you get a 2 week cooling of period with o2 so could send back with in this time and cancel contract?
@glen
did you try to install the latest 4.1 with the firewall switched-off?
What firewall s/w are you using?
(remember to uninstall all previous versions)
yes already had it running and used with ipaq 2210 and worked spot on!
and as mentioned fire wall is turned off
What firewall(s) are you running? I take it that when you say you switched your firewall off you also mean the WIndows firewall as well? What messages do you get when you plug it in? USB device not recognised or something, or does it not react at all?Have you tried trying to connect through Bluetooth, or by using a different USB port on your PC? If so and it still isn't working, there might be a fault in which case return it!
Fin
Also, sorry if its a silly question, but you have got at least Outlook 2002 on your PC?
pretty sure i have willcheck later? whys that?
It's just that if your device is connected (you can explore it etc) there doesn't appear to be a connection problem, the problem seems to be with synchronization, for which Outlook 2002 (or later) is needed. Maybe I'm barking up the wrong tree, but I had a similar problem when i tried to sync my Exec to my laptop (which only runs Office 2K) I had to install 2K2 from the disc which came with the Exec and all was fine.
At work I get a similar problem.
When I sync with the PC I need to start outlook first before connecting via usb, or else it comes up with an error and only allows me to explore the device.
At home it seems to work ok.
For me at work I think its down to activesync trying to do its thing before outlook has properly loaded.
i dont think this is the problem as i sure i have the xp pro version but will check when i get home...
but saying that the exec connets fine at work?
but thats windows 2k
On mine here are my observations and what I did:
1) I deleted poutlook.ink from the start up folder. This seem to help and at the same time reduces any notification errors after a soft reset which I noticed occurs if I have either sadaemon.ink and poutlook.ink on the start up folder. As of now I only have handymenu.ink in there, a program that I use to launch some system applications.
2) I also noticed that for my computer to recognize my EXEC, I need to plug it in when it is OFF. If I plug it in when it is ON, I get the message device not recognize. If I forgot and plug my EXEC while it is ON, definitely, the message device not recognize appears, so I just disconnect my EXEC from the USB cable. Then turn my device OFF by pressing the power button and plug it back to the USB cable after 10 seconds.
3) Remember not to connect your EXEC immediately via USB cable if you just closed the screen and assume it is already OFF. You have to make sure your EXEC is OFF by turning it OFF using the power button or at least you have exceeded your set time for device activity while on battery power.
4) If however after all these precautions and I still get that message device not recognize, which I seem to experience 1 in 50 tries. I just disconnect my EXEC from the USB cable, make sure I turn it OFF using the power button and plug it back in.
5) I also ONLY experienced this problem to have occured after I upgraded my radio version to 1.06.00. BUT this is a small price to pay for the added benefit of that upgarde.
With these in mind, I always connect without any problems. The message device not connected, I only experience 1 in 50 tries, so I am happy with that.
checked outlook and i have 2002 sp3, going to try the over thing mentioned
tried all those tips and i still get the same message:
CRITICAL COMMUNICATIONS SERVIES HAVE FAIL TO START, TRY RESETTING THE MOBILE DEVICE, AND CONNET AGAIN.
which i have done loads of time including hard resets!
I had none of these troubles with my ipaq!
Is your USB cable plugged directly into your PC? I have had problems syncing before when my device was plugged in through my monitor instead of directly.
Thanks chaps i sorted it at last!!! only took 2 weeks!!!
it was the firewall after all just turning it of was not enough uninstalled it the got norton and set up prop as on microsoft web sight.
job done!
just got to sort tomtom prob now, but brought step by step instrucions of ebay for a fiver!!
looks like a rip of but had bits of the guy before so figures crossed!
if any good ill post up here........
Activesync has been driving me nuts for the past 3 days.
I have been happily syncing my s100 with my desktop for several months, when all of a sudden it is only as Guest. What's most annoying, the help section of AS tells me that as soon as I plug in my device, the Connection Wizard will pop up. Merlin must be on holiday, because nothing turns up on my screen...
I have tried the following:
1. Uninstall - reinstall Activesync (acts the same way)
2. Restore a backup of the device (but Activesync will tell me it cannot complete the operation)
3. The "Get Connected" menu item - usb available, but no device found (then how can it see a "guest"?)
4. Looked helplessly or advice on MS's help topics, with a monumental headache as my only result.
I figure I must have toyed around with the connection settings on the S100 (although my growing suspicion is my brother has, as he intends to get a ppc as well and has been playing with mine to convince himself). I'm hoping the knowledge of the senior members here can help me out - I'd hate to do a hard reset and loose all my sms (about 700 inbox only).
Thanks for any help anybody can give!
C'mon... Nodody has an idea?
Anybody?
Please?
what version of active sync
http://support.microsoft.com/kb/259954
Also copied from another forum
If yes, suggest you try registering the MSXML.DLL and MSXML3.DLL. To
register these dlls, do the following:
On your computer, click Start, Run and type:
regsvr32 msxml.dll
You should receive a message stating that the registratoin succeeded.
Repeat the step and register the other dll as well. Type -
regsvr32 msxml3.dll
Restart the computer and attempt to synchronize.
Click to expand...
Click to collapse
Did you delete all existing partnerships from Activesync ?
Sorry, forgot to mention the version: 3.8 (as suggested by microsoft)
Deleting parterships was the first thing I did, even before uninstalling/reinstalling it. Could the problem be the Jam?
I have a new MDA Universal and I had an MDA Blue Angel before. Therefore, I had Active Sync installed on my laptop.
Sync on the Blue Angel did - and still does - work fine. Only the Universal does not get connected. It says on the desktop that it was trying to connect, but that takes forever and in the end, only the green arrows went circling about. On the device, I am missing a window pop-up which came under wm2003 when it connected on AS, but I guess they don't have this anymore. When I click on the sync icon on the pda, it tells me it was connected.
I have tried:
Uninstalling AS and re-installing it with and without re-booting my desktop in between
soft and hardresettin the pda several times
turning the windows firewall on and off and deactivating antivir
upgrading to AS 4.2
Downgrading back to 4.1
I cannot even delete partnerships. I dont even get that far.
It almost looks like AS is not properly installed on the pda... not knowing how I should change this since I cant install anything without a connection...
Any ideas?
sacha
Hi All,
failry new memeber when it comes to posting but have been using you guys as an essential source of bugfixing, problem solving and general HTC MDA advice since my TYTN.
I have spent sometime searching but not been able to find anyone with an issue similar to mine.
So heres the thing, recently exchanged my TYTN for a TouchHD and overall extremely impressed with both the handset and dev work done on here already.
I am running Dutty's 1.7 rom coupled with Radio ROM 1.09.25.35 all has been working and syncing wonderfully, however today when i try to sync up to my laptop to upgrade the radio to 1.10.25.25 i cannot get the darn thing to connect to activesync at all.
I am running XP SP3 and activesync 4.5 (again successfully until today)
I am using a non HTC USB lead which i know is generally a no no, however i sync'd up my kaiser with this lead for over a year and have been successfuly syncing my HD until today. I have tried an alterante USB lead just in case, again one with which i had no issue on the Kaiser.
I have tried to sync with the firewall on and off, also with my AntiVirus on and off
I have tried disabling Start_settings_USB-PC "enable faster data sync" to no avail.
I have tried the cusomary uninstall and reinstall of a fresh MS downloaded Activesync again no joy.
When I connect my HD to the pc and select connection type "Disk Drive" it recognises it instantly and allows me to browse the microSD card
When i connect with connection type "ActiveSync" it opens activesync, and displays connecting for smoe time and then decides it can't connect and offers me a diagnostic scan.
I have run the scan and saved the log file for information.
so basically the laptop can see my HD, activesync recognises a device has been connected via USB but refuses to finalise the connection. Oh obviously i have tried the "connect all using the connection" setting in activesyn on the HD as well. Figure the more i can tell you about what i have and havent done now the more time it saves you guys.
Its almost as if a process or service has been stopped or deleted on the device but i am buggered if i can figure if or what that maybe.
Any help appreciated guys. Obviosuly i will as a matter of course re-attempt all the above with the official HTC USB cable when i get home, but honestly dont see this being the issue considering the history of effectiveness of these cables.
I look forward to a flurry of interesting responses for me to try. Big thanks to all those who have made my WM PDA experience spot on to date.
Dboy
Update as promised.
Have got home and tried to connect using the HTC cable but still no joy.....
What could possible have gone wrong ?
No one any ideas ??
Hello,
I got a very similar issue, after some investigation I found out that it was my calendar causing this strange connection behavior.
Please do the following test,
1. delete your phone in active sync
2. reconnect your phone with the PC using the USB cable
3. When it asks for the synchronizing options (by default contacts, calendar,E-mail, favorites & M office one Note are ticked), REMOVE the tick of the calendar.
4. After finishing the setup wizard the synchronizing process will run as expected
So in my case I'm having trouble with the calendar, why ? I don't know but maybe someone else might have an explanation.
Good Luck
I encountered similar problems with ActiveSync previously but it was solved not via a soft/hard reset of my HD, but after I reboot my PC. Hope this can help you.
Note: I rarely shutdown or restart my laptop. I simply leave it to hibernate.
Reset HD Touch to get syn again.
One day could sync next day could not.
In the end did soft reset of phone all OK now.
Think the problem is I took a photo and it took ages to save it?
Thinking of put small hole in case so I can do a soft reset without the pain of unclipping cover. Any thoughts.