Hello,
I've some problems to install many programs on my tilt, since it has returned from repair.
I've this message almost every time.
"Installation failed.
Program or setting couldn't installed. Didn't have the required system authorization."
Rom vodafone win6.1
rom 3.28.163.3 FRE
date 06/17/08
radio 1.65.17.54
protocole 25.83.40.02H
I hope you can help me.
Thank you !!
Fred
I would back up and just hard reset.....
It's not allowing unsigned apps to be installed. Search for Kaiser unsigned apps & you will find the solution in the form of a cab &/or registry edit.
thank you,
i found "Security Configuration Manager Powertoy for Windows Mobile"
but in security mode off, i've the same problem...
Related
I have received a .cab file patch (self extract) to install it directly into the ppc device, but I am getting regularly the following message: Installation was unsuccessful, the program or setting cannot be installed because it does not have sufficient system permission. I have tried every possible solution on the web without success. Has anybody experienced such an issue? or is there a way to delete every possible security or protection key in the file.
Any help is highly appreciated, thanks
Can you upload the .cab?
Your problem is not with the cab. Your device is application locked so only cabs that are signed by a trusted certificate can alter system settings.
If you look in the WiKi or at least tell us what phone you have we might tell you how to unlock it so you can install your cab.
I have an eten M700 with WW6 onboard, and the file that I want to install is BT.CAB patch. Since the upgrade to WW6 every file issued by e-ten corp has to passe through security certificate check. Now I do believe that you are right about the fact that this the device is application locked .
So, how can I unlock this device to be able to install .cab files? Any help please, I need this file.
Thanks for help
Did you try installing this cap directly after a softreset? Could be that some process is running that should be used by the CAB. I had exactly the same message when I was trying to install a comm manger while the old comm manager was running.
Yes I did, I have tried every possible solutions such as Hard reset, Soft reset, installed without any soft running on the background. It is a strange issue, I' ve this file from eten corp support in order to help me with the upgrade of the MS BT stack. The ww6 that I have on board is legall with imei and a key code, Any other sollution such as hacking the .cab file? thanks for assistance
Hi everybody I am trying to upgrade my i-mate PDA2K from WM2003SE to WM6,
but I get stuck before starting.
I installed the unlocker.cab downloaded here ftp://xda:[email protected]/BlueAngel/BA_WM5/Tools/xda-developers_Unlocker.CAB but when I launch unhide (or unlock, or hide, or lock) I get a "Impossible to find "unlockextrom" or any of its component" error
I tried to hard reset, but nothing changes.
Is there anyone who can help me?
Thanks
F
first time i heard of about this error.
it seems you have a software problem there regarding specifically the unlockextrom program.
hard reset your device. reinstall the programs for unlocking then run the unlocker and repart_doc.exe
Same Problem hier:
unlockextrom could not be found
Any solutions?
Update:
I tested this on two PH20B
Both are unlocked to all Networks.
Problem:
Path is fixed
e.g.: unhide 62#"\Program Files\ExtendedROMUnlocker\unlockextrom.exe" -unhide
Workaround:
copy "Programme\ExtendedROMUnlocker\unlockextrom"
to "Program Files\ExtendedROMUnlocker\unlockextrom"
After this you will see the Icon of the programms.
Solution:
Please create a new international Version
Hi Guys!
I'm using SuperMario Lite ROM (June 3) in order to test some usefull sw in my Blackstone in a system clearest as possible. I had tested many apps w/o problems and others that doesn't work or crash ..with consequent HS. Btw this is the first time i have found this problem and before doing the umpteenth "ROM sand-paper" should be intersting to find some solution in the reasonable future situation in which hard reset costs much more consequences.
The problem: I've tested JZ SmarMort v1.5 which has subsequently installed MortScript v4.2. Everything went well until I have decided to uninstall them. I have unistalled (in the order) JZ SmartMort and then MortScripts, btw beeing JZ SmartMort not uninstalling normally I have used (as suggested from SmartSmort) SDK Tools to unistall it completely. Than I have done a soft reset and now..???!
Any software I try to install gives the same result: "Installation was unsuccessful. The program or setting cannot be installed because it is not digitally signed with a trusted certificate." :O
I searched here in the forum but i haven't found solution yet.. anyway these are been my unfruitful attempts:
- Install SDK Certs --> same installation unsuccessful message as for any other progs
- Install Cert_SPCS --> see above
- Install Default Signed DisabledSecurity --> see above
- Install HD Tweak --> see above
- Change/Add:
[HKLM]\Polices\Polices 000010a DWORD: 1 (decimal)
--> nothing changes
I'd like to know Your opinions and suggestions.. anyone who knows how to solve this?
Waitin' for your replay.
NiceOne
(fN)
Try to find sdkcerts.cab on this forum.
FileFixer said:
Try to find sdkcerts.cab on this forum.
Click to expand...
Click to collapse
Hi FileFixer!
Has said in my previous post I've just tried to install SDKCerts.cab taken from here but not solved the problem. In fact, as for any cabs I try to install, I have the same results: "Installation was unsuccessful. The program or setting cannot be installed because it is not digitally signed with a trusted certificate." and then doesn't install.
Anyway THANK YOU very much for your interest and reply.
NiceOne.
fN
Problem solved HERE.
It can be close. THX!
(fN)
Hello!
Anyone here knows where I can download the latest version of quickgps?
I thought I saw it before but cannot seem to find it now.
Thank you.
James
Cab in last post
http://forum.xda-developers.com/showthread.php?t=365595&highlight=quickgps
r
Andrew
Hi all,
i am searching for the QuickGps cab.
(i send my phone to repair a screen issue, and they installed a news rom + hard reset, and i dont have anymore the quickgps program)
I have tried differents cabs, and also the one recommended on the link above.
i always get the same result:
- After installing the cab on the phone (internal storage) and not on the SD Card
- rebot
- click on quickgps icon:
"impossible to open the file. it is not signed or one of the components are not avaible"...
I have tried several cabs, and somes "fixed cabs" and nothing; I always get this error or another one (i dont remember exactly, something about empty page...")
any ideas?
For information, my phone HTC Touch HD
rom = SFR (france) 1.14.163.3 32434 FRE
Thanks... for any new hint
Hello guys,
i'm having problems to run the aplication tf3d congif, it gives me this error:
"ERROR: An unexpected error has occurred in Diamond TF3D Config.exe.
Select Quit and then restart this program, or select Details for more information.
I've deleted the .xml opera file in tool directory, nothing, i've looked up for registry in HKLM \ Drivers \ TouchPanel and there was DWORD.
What else could i possibly do???
Please help me out guys.
Thanks.
Anyone please?
Begging you
Im using 2.11.Gen.Y WWE Rom
wm 6.1 proffessional
CE OS 5.2.21056 (Build 21056.1.6.9)
Please help...
It gives me large detailed unexcpected error
(NotSupportedException) and then large text of parse errors, i really hope you could help me, thanks in advance.
I think TF3D.config is made for older OS-versions, you should search for Advanced Config...
I have installed Advanced Config, but it only disables, enables and change values of certain things, i need to change theme, tf3d config does that stuff, but i just can't make it work.
also me
i've same problem. wm 6.5 manila. i tried to cancel tweaks file but nothing.