Hi everybody I am trying to upgrade my i-mate PDA2K from WM2003SE to WM6,
but I get stuck before starting.
I installed the unlocker.cab downloaded here ftp://xda:[email protected]/BlueAngel/BA_WM5/Tools/xda-developers_Unlocker.CAB but when I launch unhide (or unlock, or hide, or lock) I get a "Impossible to find "unlockextrom" or any of its component" error
I tried to hard reset, but nothing changes.
Is there anyone who can help me?
Thanks
F
first time i heard of about this error.
it seems you have a software problem there regarding specifically the unlockextrom program.
hard reset your device. reinstall the programs for unlocking then run the unlocker and repart_doc.exe
Same Problem hier:
unlockextrom could not be found
Any solutions?
Update:
I tested this on two PH20B
Both are unlocked to all Networks.
Problem:
Path is fixed
e.g.: unhide 62#"\Program Files\ExtendedROMUnlocker\unlockextrom.exe" -unhide
Workaround:
copy "Programme\ExtendedROMUnlocker\unlockextrom"
to "Program Files\ExtendedROMUnlocker\unlockextrom"
After this you will see the Icon of the programms.
Solution:
Please create a new international Version
Related
Could someone please help?
I have an XDA Exec (HTC UNIVERSAL) Ive been searching for days to a solution for this without avail and you guys seem to know what your talking about! Im very new to this and need a solution to this error when i try to install some applications and run them:
" X cannot be opened. Either it is not
signed with a trusted certificate, or one of its components cannot be
found "
Is there any way you can disable this in WM5? my WM5 version is OS 5.1.1700 (Build 14354.0.1.1)
Or is there any way whatsoever you can get around this? please if anyone can help do let me know and post!!
Thankyou !!
Is your phone locked ?
It may be locked or your operator prevent installing all of 3d party applications. In this case reinstalling "clean" WM5 may help (I'm not sure though) - I'm only a newbie in WM5.
Another reason that application you run trying access trusted functions - like allocation of the physical memory. In this case I'm not sure what can be done - reinstallation of WM5 will not help.
Its unlocked! so if i re-install wm5 it wont say this when i install programs? i have tried resetting the phone and installing different roms but nothing works! is there any particular rom i should be looking to install? or anything i can put in the extended rom to install after a hard reset to sort this out? PLZ HELP!
I have had that problem, too and I was going crazy. Then I tried the following tweak but I do not really know why it should work, it just did:
in HKLM\System\ObjectStore is a reg key "RegistryType=1", which means Hive based registry.
When you set it to "RegistryType=0", which means FILE based registry, all changes you do in the registry will stay there also if you reboot with device's reset button...
BUT AFTER YOU CHANGE THIS VALUE, FIRST REBOOT HAS TO BE DONE WITH SOME SOFTWARE, NOT WITH THE RESET BUTTON.
Subsequent reboots can be done with reset button then. :lol:
there is another tweak that gets rid of the warning messages, but I did not use that one
really! which software could i use to reboot the phone??
also is resco registry okay to view and change this? it says registry type 0x0 (1) i have now changed it to 0x0 (0) is this correct? i performed a soft reset but im stil getting the error message! is this because i need to use software to reboot?
yep, the first soft reboot needs to be done with software. After that you can use the usual way again.
After I had done this I removed all "problem apps" and then reinstalled them and it worked.
What software did you use or could i use to reboot my ppc chuckchuck?
I would unlock (unhide, clean, install, re-hide) my ExtRom but I haven't found a procedure for Prophet.
Could I use any other PPC procedure/soft or is it different ?
Any hint where to search ?
Thanks
BUMP, please!
Tried this?
I have read here and at other sites such as buzzdev that the wizard unlocker works. It works "sort-of" for me. I don't know what I did before, but I added a ringtones folder long time ago, and I'm now unable to delete it. After a soft reset, it comes back.
You can try it. Others have had success
I've read the wiki and tried so many times to install *.cab files to my Hermes. But everytime i click on it it just show me xml source codes. Can anyone give me some advice? thanks alot.
my hermes spec:
ROM LSVW WM6 16/6
Radio 1.43.00
*sorry* didn't know i can't unzip it before put into the PDA. now it works.
I had similar problem, but mine included none of the installed apps showing up in "Remove Programs". I'd check to see if you have the same situatuion. Sadly, I don't know the cause and had to do a hard reset. I believe that it might have been caused by doing a restore of a backup, dunno.
I have received a .cab file patch (self extract) to install it directly into the ppc device, but I am getting regularly the following message: Installation was unsuccessful, the program or setting cannot be installed because it does not have sufficient system permission. I have tried every possible solution on the web without success. Has anybody experienced such an issue? or is there a way to delete every possible security or protection key in the file.
Any help is highly appreciated, thanks
Can you upload the .cab?
Your problem is not with the cab. Your device is application locked so only cabs that are signed by a trusted certificate can alter system settings.
If you look in the WiKi or at least tell us what phone you have we might tell you how to unlock it so you can install your cab.
I have an eten M700 with WW6 onboard, and the file that I want to install is BT.CAB patch. Since the upgrade to WW6 every file issued by e-ten corp has to passe through security certificate check. Now I do believe that you are right about the fact that this the device is application locked .
So, how can I unlock this device to be able to install .cab files? Any help please, I need this file.
Thanks for help
Did you try installing this cap directly after a softreset? Could be that some process is running that should be used by the CAB. I had exactly the same message when I was trying to install a comm manger while the old comm manager was running.
Yes I did, I have tried every possible solutions such as Hard reset, Soft reset, installed without any soft running on the background. It is a strange issue, I' ve this file from eten corp support in order to help me with the upgrade of the MS BT stack. The ww6 that I have on board is legall with imei and a key code, Any other sollution such as hacking the .cab file? thanks for assistance
Hello,
I've some problems to install many programs on my tilt, since it has returned from repair.
I've this message almost every time.
"Installation failed.
Program or setting couldn't installed. Didn't have the required system authorization."
Rom vodafone win6.1
rom 3.28.163.3 FRE
date 06/17/08
radio 1.65.17.54
protocole 25.83.40.02H
I hope you can help me.
Thank you !!
Fred
I would back up and just hard reset.....
It's not allowing unsigned apps to be installed. Search for Kaiser unsigned apps & you will find the solution in the form of a cab &/or registry edit.
thank you,
i found "Security Configuration Manager Powertoy for Windows Mobile"
but in security mode off, i've the same problem...