Anybody have the same problem today? The Weather tab in Tf3d have stoped updating, It says unable to update want to try again Y/N.
It have worked great before but today suddenly it stopped, is the servers down or what? anybody have it installed can check on their?
Thanks
I couldn't get weather to work at all at first. I had to uncheck the box in connections that says u connect through a proxy. I dunno if u have to do the same thing
Strange, because it have worked very well before and I have done nothing to the settings, but I will try it soon
EDIT:
Now it works, and I didn't do anything not even a soft reset or anything....may have been the server or the operator network
TF3D is a buggy piece of crap on the X1 right now..thats your problem.
mlinz said:
TF3D is a buggy piece of crap on the X1 right now..thats your problem.
Click to expand...
Click to collapse
I'm gonna have to agree with mlinz. I'd focus on modding that spb mobile shell. I think i'm gonna try and do something there when i get a chance
Related
I got my XDA Exec last week and was impressed apart from the speed of the unit when switching screen modes. I thought that the O2 active would be to blame, so found out how to stop it running, and voila my Exec was instantly faster.
After further reading I found that a hard reset and selecting corp (or corporate) mode would install the bare minimum, so I decided to try this to see if it was better. Unfortunately, the phone and gprs/3g now do not work, as the settings are not installed. Does anybody know how to set these up? The Exec does appear to be much faster so I would quite like to get it running in corp mode.
Thanks
Allan
AFAIK, Basic mode is identical to Corp mode, except that it does pre-configure the connection settings. The O2 Active interface doesn't appear in Basic mode.
However, I think Basic mode does include an O2 icon in the Start bar and a battery monitor thingy there too. It's relatively easy to stop them appearing by deleting the relevant links from the \Windows\Startup folder though, and then you have a clean Exec like God intended
The one thing did like about corp mode was that it didnt say "running in basic mode" when resetting, and it had a battery monitor on the today screen. But I guess I can live without those...
Allan
Remember: The "Search" button is your friend
SiliconS said:
AFAIK, Basic mode is identical to Corp mode, except that it does pre-configure the connection settings. The O2 Active interface doesn't appear in Basic mode.
Click to expand...
Click to collapse
The Basic mode also uses the O2 Phone Dialer skin, which is removed in the Corp install.
Dave Baumann said:
Remember: The "Search" button is your friend
Click to expand...
Click to collapse
Erm, I have already used the search and couln't find anything thats why i made a new post!
Allan
Dave Baumann said:
SiliconS said:
AFAIK, Basic mode is identical to Corp mode, except that it does pre-configure the connection settings. The O2 Active interface doesn't appear in Basic mode.
Click to expand...
Click to collapse
The Basic mode also uses the O2 Phone Dialer skin, which is removed in the Corp install.
Click to expand...
Click to collapse
Oh. Just tried selecting Corp and did a soft reset and the phone looks exactly the same to me. Ah well. It's not exactly an ugly skin so I don't care if it is the O2 one.
What does the non-O2 skin look like?
allanmb said:
Dave Baumann said:
Remember: The "Search" button is your friend
Click to expand...
Click to collapse
Erm, I have already used the search and couln't find anything thats why i made a new post!
Allan
Click to expand...
Click to collapse
Try clicking that link, it leads you to your answers!
SiliconS said:
What does the non-O2 skin look like?
Click to expand...
Click to collapse
Similar, but less "flashy", but more in-keeping with the default WM5.0 theme.
Doh! Thanks Dave, didnt notice that was a link before!
Is there anything else I would need to setup in corp mode that would otherwise be setup in basic mode? I cant think of anything off-hand.
Also, if you know anything about this it may be useful. I connect to 3g but the connection often hangs. In IE I see either "connecting..." or "locating..." in the status bar and nothing else. The only way to fix this once it gets to this state is to reset the unit. Merely restarting the connection doesnt seem to work. I get similar probs in any prog that uses the 3g connection, they just stop working. (I am in good reception areas too).
Do you think this is a setup issue, a simcard or phone issue? I am inclined to think it might be a simcard issue.
Thanks
Allan
allanmb said:
Doh! Thanks Dave, didnt notice that was a link before!
Click to expand...
Click to collapse
Hehe - No worries.
Is there anything else I would need to setup in corp mode that would otherwise be setup in basic mode? I cant think of anything off-hand.
Click to expand...
Click to collapse
I've just done this myself yesterday, and all the services I've tried appear to be working - I can send and recieve calls, text and use the web. The only thing I've not tried yet is MMS. The only thing missing from the Corp mode that I would like is a decent battery bar, but I'd imagine that I'll be able to find a little utility that will do that.
Also, if you know anything about this it may be useful. I connect to 3g but the connection often hangs. In IE I see either "connecting..." or "locating..." in the status bar and nothing else. The only way to fix this once it gets to this state is to reset the unit. Merely restarting the connection doesnt seem to work. I get similar probs in any prog that uses the 3g connection, they just stop working. (I am in good reception areas too).
Do you think this is a setup issue, a simcard or phone issue? I am inclined to think it might be a simcard issue.
Click to expand...
Click to collapse
To tell you the truth, I don't know. This is the first time I've used a 3G phone myself (been a user of all previous XDA's, none of which were 3G) so I had to get my SIM switched over. All I did notice is that one my account was switched to the new SIM connectivity seemed to be very bad in the 3G areas - I phone O2 about it and they said they had some issues with their network then. That was last week, but now everything seems to be fine.
To you restore your battery meter in corporate mode you need to make sure that batterNFO.exe is here
\Windows\Mobile Solutions\O2ActiveUI\Modules\BatteryNFO\batteryNFO.exe
and makesure that batteryNFO.lnk is here
\windows\startup\batteryNFO.lnk
if anyone needs a copy of the file let me know and I will post a link
If you install the gprs monitor from the o2 app disc, it has a nice little battery info built in to the gprs monitor icon.
Allan
ice_coffee said:
if anyone needs a copy of the file let me know and I will post a link
Click to expand...
Click to collapse
Yes, please - the files haven't been extracted on my XDA since I did a hard reset and started in Corp mode.
Cheers.
Dave Baumann said:
ice_coffee said:
if anyone needs a copy of the file let me know and I will post a link
Click to expand...
Click to collapse
Yes, please - the files haven't been extracted on my XDA since I did a hard reset and started in Corp mode.
Cheers.
Click to expand...
Click to collapse
Im sorry I got it wrong, I thought I had got it because there was an on screen battery indicator in corporate mode, but I have come to realise that it might have been their already (the one next to the wireless manager)
This is error of Rom Windows Mobile 6 Profesional R0
1. Play WMA by Window MediaPlayer not best!
2. have not PowerPoint
3. Problem with Wifi
4. .....
powerpoint
xman21219xx said:
This is error of Rom Windows Mobile 6 Profesional R0
1. Play WMA by Window MediaPlayer not best!
2. have not PowerPoint
3. Problem with Wifi
4. .....
Click to expand...
Click to collapse
regarding with the powerpoint, just scroll down abit in the first post, it's there. Enjoy...
Anth
xman21219xx said:
This is error of Rom Windows Mobile 6 Profesional R0
1. Play WMA by Window MediaPlayer not best!
2. have not PowerPoint
3. Problem with Wifi
4. .....
Click to expand...
Click to collapse
New Problem with mail2web.
and other problems in wm5 are still there, i return to wm5.
anyway,thanks to Helmi!!!!
4-in regional settings, there are no settings for Turkey
Oh my god, I doubt today we are going to read lets say 10more post claiming "My regional setting is missing"
Yes, there are not all regional settings... Its well known!
----
Not from you man
1 thread & 1 post what's more?
i opened my thread before this thread and when this thread opened about report of this rom i wrote this problem here again?
is it more?
windows media player plays music files not well. The rest seems good.
kerio said:
Oh my god, I doubt today we are going to read lets say 10more post claiming "My regional setting is missing"
Yes, there are not all regional settings... Its well known!
----
Not from you man
Click to expand...
Click to collapse
good point maybe a sticky thread with known problems?
dosnt ring when the light of screen is closed
my contact broken
please since upgrade to wm6 i cannot add my number to contact, please fixs it, but thanks for wm 6
you failed to do the reset + no/yes/yes + mail button routine after flashing.
pharmartacist said:
please since upgrade to wm6 i cannot add my number to contact, please fixs it, but thanks for wm 6
Click to expand...
Click to collapse
Ok, running it for one day
- After battery exchange (i have 2 of them), the password (simple PIN) i couldnt enter the device. The correct code just wasnt working. Made hard reset + cleaned up registry and storage and it was ok.
- Sometimes the radio just dont wake up. Maybe it is just problem with my BA as sometimes after the battery was taken out and colored stripes appear the radio and *next* version number are showing none (anyone knows why this happens?)
MioMap works perfectly, pairing the device with holux bluetooth gps works great.
anybody know to fix the error of window media player in this ROM?
It's very important for me?I can use other media's soft but....please help me!
root said:
- Sometimes the radio just dont wake up. Maybe it is just problem with my BA as sometimes after the battery was taken out and colored stripes appear the radio and *next* version number are showing none (anyone knows why this happens?)
Click to expand...
Click to collapse
I do not recall the exact reason this happens, but it is a known issue that happens after the battery is removed/replaced. The only workaround is to soft reset the device after this appears.
tuatara says:
Tuatara said:
First off ... have the "R NONE / G NONE" appear after changing the SIM and/or battery is relatively common. My phone does the same thing.
This is due to the GSM radio taking longer to 'cold boot' than the bootloader is giving it time for. Simply let it get a few seconds into the boot (before it starts loading the OS & redraws the screen). Then, hit the 'reset' hole once ... and everything will boot fine from then on.
Click to expand...
Click to collapse
Flightmodus
Hi,
I have a problem with the Flightmodus. After turned off Phone in Commanager, the phone is off for about 10min. Then the phone turns automaticly on. The same when I do a softreset. Has anyone a solution?
Christian
i don't have some problem with flightmode.Everything is very well!
Ok... another problem... sometimes (cant figure out what triggers that) my phone is not "online" on gsm network.
Everyhing looks like it is working ok, but it cant be called from outside and when i try to call out, it immidiatly disconnects. Then i have to reset it, after that it becomes accessible again (and i can make calls too...).
Highly annoying, i hoped WM6 will fix this but the same **** happens...
root
Hi, thats interesting. It may be caused by some software? Can you "recall" the problem with with clean ROM?
kerio said:
root
Hi, thats interesting. It may be caused by some software? Can you "recall" the problem with with clean ROM?
Click to expand...
Click to collapse
Yes. WM2005 helmi and WM2006 helmi. It just happend. And i am not using additional software for now, well... miomap, but it is not loaded in mem. It looks to me like radio hangs.
I have a t-mobile Vario III and the x-button worked fine from the title bar until i installed pocket plus 4, now having removed pocket plus as the UI seems much more responsive without it i have lost my x button from the top right of the screen :-(
In settings i have the boxes checked to enable it both for tapping and also to be on the home screen but its not there.
I went into settings and did a factory restore and now the x-button icon is gone from system settings completely !!
I have tried to install the x-button 2.0 cab from here without success as it just wont let me install it, either onto device or storage. (the original version on the device was 1.51)
Its really starting to bug me now lol so i`d be very grateful if anyone could help !
Thanks guys
Siox said:
I have a t-mobile Vario III and the x-button worked fine from the title bar until i installed pocket plus 4, now having removed pocket plus as the UI seems much more responsive without it i have lost my x button from the top right of the screen :-(
In settings i have the boxes checked to enable it both for tapping and also to be on the home screen but its not there.
I went into settings and did a factory restore and now the x-button icon is gone from system settings completely !!
I have tried to install the x-button 2.0 cab from here without success as it just wont let me install it, either onto device or storage. (the original version on the device was 1.51)
Its really starting to bug me now lol so i`d be very grateful if anyone could help !
Thanks guys
Click to expand...
Click to collapse
Try this one:
HTC X Button (Task Manager)
htc/X-Button-1.5.cab
Mike
Nope that doesn`t work either, it wont even try to install that one, unlike v2 which it at least tries to install before telling me it wasn`t successful.
Many thanks for trying tho
Siox said:
Nope that doesn`t work either, it wont even try to install that one, unlike v2 which it at least tries to install before telling me it wasn`t successful.
Many thanks for trying tho
Click to expand...
Click to collapse
Very odd. Tho' probably due to it being installed and perhaps even running but not showing correctly.
Another hard reset?
Mike
Thanks, seems another hard reset did the trick
Damn thing wont connect to the net automatically now when launching browser etc, however it does when using connection sharing with my laptop. Very odd lol
Thanks again
hey guys...just looking for some help. its not a big problem but i just got my hands on my HD yesterday and everytime i check whats running in the backround...theres Active Sync.
i close it and check back 2 minutes later and there it is again!
i noticed this on my diamond after i update it with the latest WWE ROM but didn't take to much notice of it because i was giving it to the girlfriend.
is it meant to run in the backround??
i haven't even connected it to the laptop yet
cheers,
Phil
Same problem for me !
eire77 said:
hey guys...just looking for some help. its not a big problem but i just got my hands on my HD yesterday and everytime i check whats running in the backround...theres Active Sync.
i close it and check back 2 minutes later and there it is again!
i noticed this on my diamond after i update it with the latest WWE ROM but didn't take to much notice of it because i was giving it to the girlfriend.
is it meant to run in the backround??
i haven't even connected it to the laptop yet
cheers,
Phil
Click to expand...
Click to collapse
I tried this http://forum.xda-developers.com/showthread.php?t=423540 from the Diamond forum, but it doesn't seem to work.
cheers mate,
i'm gonna give that a go and i'll let you know how i get on
eire77 said:
hey guys...just looking for some help. its not a big problem but i just got my hands on my HD yesterday and everytime i check whats running in the backround...theres Active Sync.
i close it and check back 2 minutes later and there it is again!
i noticed this on my diamond after i update it with the latest WWE ROM but didn't take to much notice of it because i was giving it to the girlfriend.
is it meant to run in the backround??
i haven't even connected it to the laptop yet
cheers,
Phil
Click to expand...
Click to collapse
I have the same on my old device, Mitac Mio A701. This is probably normal for Windows mobile device. Check out this thread too. there are solutions for this...
the most simple and elegant solution:
just add activesync to exclusive list in the task manager...
1. when you'll check and get activesync on (uninvited)
2. go to task manager.
3. Click and hold on the word Activesync and then select from the pop-up "add to exclusive".
4. go to exclusive tab and thick activesync (repllog.exe).
done. worked for me many times (many ROMs)
i've tried this one (thanks to KukurikU) ...and so far so good.
i think its still running in the backround somewhere but i can't see it.
will try the other ones suggested...for a permanent fix later
cheers
eire77 said:
the most simple and elegant solution:
just add activesync to exclusive list in the task manager...
1. when you'll check and get activesync on (uninvited)
2. go to task manager.
3. Click and hold on the word Activesync and then select from the pop-up "add to exclusive".
4. go to exclusive tab and thick activesync (repllog.exe).
done. worked for me many times (many ROMs)
i've tried this one (thanks to KukurikU) ...and so far so good.
i think its still running in the backround somewhere but i can't see it.
will try the other ones suggested...for a permanent fix later
cheers
Click to expand...
Click to collapse
yes you are right, you only prevented the application UI from running, the processes that's related to activesync are still running. there are several of them, so you may only have killed 1 or 2.
i don't understand why you want to kill activesync permanently. how do you sync your contacts and calendars and all that? :S
buggybug0 said:
yes you are right, you only prevented the application UI from running, the processes that's related to activesync are still running. there are several of them, so you may only have killed 1 or 2.
i don't understand why you want to kill activesync permanently. how do you sync your contacts and calendars and all that? :S
Click to expand...
Click to collapse
i don't wanna kill it permanently...i just don't want it running in the backround and the fix that i applied works fine for me but i don't understand why its running??
Kill ActiveSync Process when idle
Please see this...which I believe is an elegant solution to ActiveSync continous running...
http://forum.xda-developers.com/showpost.php?p=2135727&postcount=1
All of the sudden my Xperia cannot update:
1. Weather on SE Panels
2. Currencies on MSS Converter (the app saying there's no internet connection available, though there's one running!)
Looks like something stops connecting/using the connection although there's one!
Just to add - X1 perfectly works with all the browsers, email etc.
And SPB weather too...
Any help?
You're using WiFi?
Mr. Green said:
You're using WiFi?
Click to expand...
Click to collapse
No! Internet connection...
doministry said:
No! Internet connection...
Click to expand...
Click to collapse
omg ...
Or do you mean 3G?
I mean any available - edge, 3g, hsdpa.
No WiFi.
doministry said:
I mean any available - edge, 3g, hsdpa.
No WiFi.
Click to expand...
Click to collapse
not sure what the problem is, but do you use any R3A beta stuff??
And did you try to soft reset your device and check it again?
Sorry, but this is the only thing I can give you as advice :-s
****head said:
not sure what the problem is, but do you use any R3A beta stuff??
And did you try to soft reset your device and check it again?
Sorry, but this is the only thing I can give you as advice :-s
Click to expand...
Click to collapse
The problem is that when I want to update SE panel, what always make it display a current weather icon,
and I press "update" - nothing happens.
The icon is "dead" and shows no temperature.
And MSS Concverter when I choose to update online currencies
or check for updates, it says "no internet connection", however I'm online!.
So looks like my X1 is blocking it??
Well I did softreset my X1.
I don't use any R3 or other beta things,
as well as I don't touch any custom roms.
Maybe somebody?
arghh...
Did anybody encounter such problems with updating like I mentioned?
Why X1 blocks certain connections?