hi guys, i think i just messed up with my x1, the x1's close/ok button is gone, just the original one now, which is not as good as the x1's, is there any chance i can get it back apart from hard reset?
thank you very much.
You might have a look at Settings->Taskmanager
I have only a German version so I'm not quite sure about the naming, but I have a tab at the bottom labeled "Taste" which might be called "key" or "button" in the English version. There you can re-activate the X1 close Button by several options.
Related
Hi Vijay, I try your keypress utility on my Universal. However, have problems setting a "shift" key on the videocall hard botton. I changed the value to 16 according to the keylist. Any advice on this? Thanks.
stanip: this should be moved to the VJKeyPress thread...
VJKeypress can be used to simulate a key press, but for shift, it's like on your pc, just pressing shift and releasing. It won't do anything. I imagine what you want to do is simulate pressing and holding shift, to make CAPITALS. It doesn't do that.
I did make a set of programs to do this, pressing and holding shift, ctrl and alt, but I didn't release them because Tom Hiro's PQz came along and is an amazingly useful program. Try Tom's PQz, and if you get really stuck I'll see about releasing my app. Mine works usefully on non Universals as well, eg Magician (my main phone), but there are issues with the way the Operating System responds to having these keys held down, so it wasn't worth finishing off at the time.
V
Vijay, PQz is a great tool but I failed to find any feature to set a "shift" key for capital letters... Have been looking for this as I use Word quite often. The right shift key will save me the thumb stretch reaching out to the other side. Thanks.
stanip: it might be worth asking Tom to add any features you want, he's actively updating it seems!
I will look into the Shift key issue again, but I'm a bit busy on a few other projects. It might happen soon if I can get it out.
V
Vijay, already suggested to Tom... believe he is prioritizing it. Initially thought the keypress could solve this one faster.
It would be great if yours could help with this request.
My exec was back from repair....
and some of the keyboard doesn't corresponding to what they printed...
like:
printed actuall action
caontacts startup
ok no function
message phone
video call ok
startup ie
I read some other thread that we can re-map the left or right button on the today screen....
it seems that i can re-map the rest of the keyboard as well, logically.....
does any body have a clue?
thank you guys.....
Hello, i'm waiting from ebay an keyboard for qtek 9000(in this case, T-mobile MDA) and it was a qwertz layout.
the question is, if I change the original keyboard to a new keyboard with diferente button positions such as Ok button,video call button and others, will pda recognize the diference and atribute right function to each button?
url for new keyboard from ebay: http://cgi.ebay.com/Keypad-Keyboard...yZ150774QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Tanks a lot!!!
Seriously?
No it will not. the picture shows just a QWERT keypad with no electronics so it will not re-map anything (read: it will function exactly as the old keyboard)
remap via software
but how can i do that, which software will i use?
Tanks!
can i change sym.xxxx.txt file and fix ok, start,video call...blablabla buttons?
tanks for help!
I suppose you must find the correct language code for the keyboard,nothing else.
Someone cofirm?
PLEASE????
i don't now if i install imate rom, will solve the problem?
DESPERATED.........
Hell, the keyboard is compatible all most in every button, but wen I install it, after disassemble universal...the original space button was 1 contact, and this new one was 2 contacts.so, the new space button of new keyboard is not campatible....You can see in link, on the back side os keyboard!
At least, housing for universal of the same seller is very,very good!!!
regards
Hi!
I received a Touch HD few days ago and from the first time I noticed that something doesn’t works properly.
Initially the keyboard by default was the QWERTY one. I changed it to probe the compact one. I did the change with no problems (obviously was not a difficult issue). Well not so obviously because the problem was when I tried to return to full QWERTY keyboard.
I selected the fullQWERTY in the configuration menu, I pushed the OK button but when I tried to write a new message the compact keyboard was still there. I tried to change to any other keyboard but the result was the same. I haven’t installed any keyboard so is not a software incompatibility issue.
I reset the phone, check for rom updates, etc but I cannot select QWERTY keyboard. I have search about this but the only information I found is a post in this forum with no answer.
Please, any information about a possible solution will be greatly appreciated. Just imagine a wonderful HD without its QWERTY keyboard…
Thank you very much.
I have the same issue. A full reset did fix it but then it randomly happened again. Obviously that's not ideal!
Any ideas anyone?
Might it be worth an email to htc?
You checked for ROM updates using? I'm sure there is some registry key but not really certain.
Regards,
Carty..
I have encounter the same issue. I have found out that if you go through setting and select keyboard to change..it will not work...
It seems that touchflo took over the registry.....
Now the correct way to change your keyboard is to
1. press your keypad up.
2. you should see this little arrow beside the your keypad icon
3. when you tap the arrow you will see this menu pop up to pick the keyboard layout.
This is the ONLY WAY to change the keypad
Hope this helps
JuanQ said:
Hi!
I received a Touch HD few days ago and from the first time I noticed that something doesn’t works properly.
Initially the keyboard by default was the QWERTY one. I changed it to probe the compact one. I did the change with no problems (obviously was not a difficult issue). Well not so obviously because the problem was when I tried to return to full QWERTY keyboard.
I selected the fullQWERTY in the configuration menu, I pushed the OK button but when I tried to write a new message the compact keyboard was still there. I tried to change to any other keyboard but the result was the same. I haven’t installed any keyboard so is not a software incompatibility issue.
I reset the phone, check for rom updates, etc but I cannot select QWERTY keyboard. I have search about this but the only information I found is a post in this forum with no answer.
Please, any information about a possible solution will be greatly appreciated. Just imagine a wonderful HD without its QWERTY keyboard…
Thank you very much.
Click to expand...
Click to collapse
Hi everyone, I just got my brand new Jade, and I'm happy and satisfied with it: faster and more stable than my old Elf, I've got nothing more to ask.
Well, maybe one thing.. I miss my old keyboard.. the one I attached to this thread.
In fact, having the question and exclamation mark, and the the at, without switching pages, spared me some time.. it was fast and light.
Is there any way I can have it onto my Jade?
Cheers everyone
--
the times they're a changin'
Press keyboard icon (at Bottom Bar) - select "Other Input Methods" - Keyboard.
Not that easy, I would have figured that out..
the keyboard found in "Other Input Methods" looks alike the one I've seen on the Touch HD, it's bigger, it has an "iphone layout" (letters become bigger when selected and you can move your selection around the keyboard) and special characters (as well as question and exclamation marks) come in pages .. too bad I do not have a screen for that!
Could it be that the keyboard I'm looking for can be 'imported' from my Elf?
Edit: I've found in another thread the keyboard I meant that comes with the 3G, and that I'd like to change; here it is
Well, on mine I have both the keyboad layouts that you posted.
cignu said:
Hi everyone, I just got my brand new Jade, and I'm happy and satisfied with it: faster and more stable than my old Elf, I've got nothing more to ask.
Well, maybe one thing.. I miss my old keyboard.. the one I attached to this thread.
In fact, having the question and exclamation mark, and the the at, without switching pages, spared me some time.. it was fast and light.
Is there any way I can have it onto my Jade?
Cheers everyone
--
the times they're a changin'
Click to expand...
Click to collapse
Click the small up arrow next to the keyboard icon at the bottom of the screen.
Select 'Keyboard' at the bottom of the Settings Panel (below Full QWERTY).
Now go Start -> Settings -> Input and select 'Large Keys'.
Thanks Jademan, but that was the one I am already using.. I am gong to post you both keyboars so we can spot the differences.
Yet while I'm writing a doubt attacks me..
Could it be that the keyboard on the Elf (the one I like most) comes with the english language, while the one I have on the Jade comes with the italian language? Well, since in the Jade's one stressed letters are displayed, and right where the buttons I'd like to have should be, it could be reasonable..
....... so I just changed language, but nothing happenes, still the stressed vowels.
Damn ...
Edit: double post
cignu said:
Thanks Jademan, but that was the one I am already using.. I am gong to post you both keyboars so we can spot the differences.
Yet while I'm writing a doubt attacks me..
Could it be that the keyboard on the Elf (the one I like most) comes with the english language, while the one I have on the Jade comes with the italian language? Well, since in the Jade's one stressed letters are displayed, and right where the buttons I'd like to have should be, it could be reasonable..
....... so I just changed language, but nothing happenes, still the stressed vowels.
Damn ...
Click to expand...
Click to collapse
Yes, that's the problem, the MS keyboard on your Jade is Italian and uses the @ and & keys for different symbols. I think you may need to do some registry editing to get the keyboard up you want.
Jademan said:
[...] I think you may need to do some registry editing to get the keyboard up you want.
Click to expand...
Click to collapse
I have faith in you, xda-developers community!