Database Users

wizard qwerty uk k'board layout help

i have a wizard runing qtek-wwe rom qwerty keys work ok but not the symbols they seem to have shiften 1 space left the (s has !) (the d has @) ect i would like uk layout please, is there a quick fix i have seared and forum for some reg hacks but these dont seem to work help please

mrbubble said:
i have a wizard runing qtek rom qwerty keys work ok but not the symbols they seem us i would like uk one please, is the a quick fix i have seared and founf some reg hacks but these dont seem to work help please
Click to expand...
Click to collapse
Did you install a US ROM? If so you should be able to fix this by installing a WWE ROM I think.

Yes you can fix it, its a simple registry entry, in the
HCKU\ControlPanel\keybd entry
add a DWORD called LOCALE with a value of 0809
Regards
Riptos

T9 Dutch (and other) languages on Sysrius R0

Hi
I'm looking for a way to have dutch t9 on my Polaris. Currently I have only managed to instal a bunch of cab's and completely ruin my settings and need to reflash to correct the mistakes I have mad (installing a cab with language from Diamond). Could somebody who already succeeded help me with a step by step tutorial?

I don't have a step by step tutorial, but I would be interested in translating to dutch too. I saw this thread some time ago, but didn't have the time yet to try it out. Did you try that?

Try the gullum keyboards. There is an instruction, the only thing that won't work is the Touch keypad.
I changed 3 registry entries:
- HKLM\Software\Tegic\eT9\AvailableLanguages
I deleted some of them, got "0109, 010C, 0113" typed in it.
- HKLM\Software\HTC\ezsip\Librarycount
I changed it to "5", then I deleted the entries: Library5 to Library14 (Just everything from 5 up)
- HKLM\Software\HTC\ezsip\Library4
Changed the value to "8"
Go to input and change the t9 setting to the empty bar, et voila you have dutch T9
Good luck!
ps Don't know why I changed the entries, have been messing around a lot with entries to get T9 working and this is an old habit with which I got my T9 to work

Hi, use the gullum keys and the attachted t9 dictionary.

OK, thanks for your replies. I would like to grade it down into steps. Could you help me in understanding. I put the steps down here and lookinig for verification.
1. Acquire a cab with dutch dictionary. Is this rom/device/keyboard specific?
2. Change the registry to look for Dutch language on the device
3. Change the library count to be able to show dutch language here
4. What is the value change in library 4 for???
Help is much appreciated

greek keyboard still not, working (I think Russian too). right ?
anyone knows somithing different?

OK, Im still not there. Based on tweaks & tricks topic, kartus thread above and the current settings on other languages I made the following registry changes / additions. I installed the Gullum Dutch language CAB and now I have Dutch language by choosing the empty option. How do I get the empty box to show Dutch instead of being empty. Instead of just fixing it for now I would really like to do it a 100%
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9]
Originally "AvailableLanguages"="0109,010C,0107,0110,010A"
Changed into "AvailableLanguages"="0109,010C,0107,0110,010A,0113"
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\Sip\KdbFiles]
I added
"0A13"="spd.4x4.Dutch.kdb"
"0B13"="spd.5x4.Dutch.kdb"
"0C13"="spd.Lqwerty.Dutch.kdb"
"0D13"="spd.Pqwerty.Dutch.kdb"
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\Sip\Language KeyboardIDMapping]
I added
"0113"="0913"
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\LdbFiles]
I added
"0113"="NLlsUN_xt9.ldb"
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\IME\KDbFiles]
I added
"0613"="hpd.5x5.Dutch.kdb"
[HKEY_LOCAL_MACHINE\Software\HTC\ezsip]
I added
"Library5"=dword:00000008
Originally "LibraryCount"=dword:00000005
Changed into "LibraryCount"=dword:00000006
Click to expand...
Click to collapse
Can anybody help me get this working

Torpedojager said:
OK, Im still not there. Based on tweaks & tricks topic, kartus thread above and the current settings on other languages I made the following registry changes / additions. I installed the Gullum Dutch language CAB and now I have Dutch language by choosing the empty option. How do I get the empty box to show Dutch instead of being empty. Instead of just fixing it for now I would really like to do it a 100%
Can anybody help me get this working
Click to expand...
Click to collapse
I would like to know that too, how to get the line 'Dutch' in it. And also how to get the diamond keypad to work.

Why not wait for a dutch rom?
I know some people are working on it.

NeoS2007 said:
Why not wait for a dutch rom?
I know some people are working on it.
Click to expand...
Click to collapse
that's some good news!
thx

I Used WWE DCS rom, used the Nikki cab mentioned above with this settings and it works good in Dutch T9, I don't like dutch roms (-;
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9]
Originally "AvailableLanguages"="0109,010C,0107,0110,010A "
Changed into "AvailableLanguages"="0109,010C,0107,0110,010A,011 3"
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\Sip\KdbFiles]
I added
"0A13"="spd.4x4.Dutch.kdb"
"0B13"="spd.5x4.Dutch.kdb"
"0C13"="spd.Lqwerty.Dutch.kdb"
"0D13"="spd.Pqwerty.Dutch.kdb"
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\Sip\Language KeyboardIDMapping]
I added
"0113"="0913"
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\LdbFiles]
I added
"0113"="NLlsUN_xt9.ldb"
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\IME\KDbFiles]
I added
"0613"="hpd.5x5.Dutch.kdb"
[HKEY_LOCAL_MACHINE\Software\HTC\ezsip]
I added
"Library5"=dword:00000008
Originally "LibraryCount"=dword:00000005
Changed into "LibraryCount"=dword:00000006

QWERTY keyboard to QWERTZ keyboard help!

hello guys,
the hardware keyboard on my i-mate K-JAM is QWERTZ but when i updated its ROM version it became QWERTY i.e. when i press z on my keyboard it displays y
and the other symbols too have messed up
pls help!
thanks in advance!
-Evil Eye

Maybe you got a wrong language rom from the one you had, try installing your old rom again.
If not it may be a hardware issue, maybe have a look for the keyboard mappers if there are any and remap your keyboard keys back to the way they were maybe.
Hope this helps.
Exemike

i sorted it out by Resco Registry Editor
i changed the string values of locale file to 0407
all done
if anyone wants to know a step-by-step method, i would be happy to help
thanks

How can i install a german QwertZ Kezboard without de-installing mz new ROM?
Hey, i have tha same Problem. I installed a Kumara Garmin SKin for HTC Kaiser. But i dont wanna change this Rom to mz old one. - How can i change this qwerty-Keyboard back to mz old one and how can i make QWERTZ run on the Hardware-Keyboard too? And i want too ae, ue, oe, and so one in one Letter and of korse the ss in one LEtter. So, how can i make this run? Is there some adinn to install? And a seccond thing is, how can i set T9-Word-Recognitionto Germen? Thanks a lot of for your Replz!

Evil Eye said:
i sorted it out by Resco Registry Editor
i changed the string values of locale file to 0407
all done
if anyone wants to know a step-by-step method, i would be happy to help
thanks
Click to expand...
Click to collapse
unfortunately all those reg strings etc. doesnt work anymore. they (htc or ms) must have introduced a new reg string since built 20xxx.
I do have the same issue.

HELP - Keyboard issue

Hello XDA
I have just noticed that the "?" key (FN P) is not typing the ? but an ";". Does anyone have any ideas?
Thanks

Fn P on my UK QWERTY X1 has ; on the keyboard. ? is at the bottom and doesn't need the Fn key.

Wierd,
Mine has the ? mark on the P key in blue. There must be a setting then for this somewhere in the OS

Austrian QUERTZ has the "?" on "Fn"+"P" and the ";" is "SHIFT"+","
Seems you have an English ROM installed but you would need a German one.

ok my keyboard is:
"?" on "Fn"+"P" the ";" is on "SHIFT"+"," the "+" is on "Fn"+"N". Any ideas

You have flashed UK rom on non UK device, that is your problem. Most of non UK X1 have localized keyboards and they will work ok only with org language rom. The only way for you is to find keyboard driver and swap it to your X1 orginal language.

Ok I just did a hard reset and it flashed itself. So I need to reload it somehow?

ell82 said:
You have flashed UK rom on non UK device, that is your problem. Most of non UK X1 have localized keyboards and they will work ok only with org language rom. The only way for you is to find keyboard driver and swap it to your X1 orginal language.
Click to expand...
Click to collapse
Are you kidding me?
Does not changing CurLang value work on X1?
Go to HKLM\HARDWARE\DEVICEMAP\KEYBD and there find CurLang value. You need to open the file and change the 1033 to the value of your device. I do not have the values here, but they are on XDA, please search the forums for the answer.

Where is your device from?

I assume that Austrian and German layouts are the same.
Go to the key I posted above and change it to 1031, close your reg editor and there probably is not even soft reset needed...
EDIT: If that gives the wrong layout try 3079 after that. (I do not know of this code is supported)

Under the device settings it shows GENERIC_UK... Other then that no idea, I do know the manuals came in some other language.. so not sure.

Use registry editor program, like the free Total Commander and do as I posted earlier.
Go to HKLM\HARDWARE\DEVICEMAP\KEYBD and there find CurLang value. You need to open the file and change the 1033 on that to 1031. '
(Note that I am guessing that your device has the German QWERTZ layout?)

Loco5150 said:
Use registry editor program, like the free Total Commander and do as I posted earlier.
Go to HKLM\HARDWARE\DEVICEMAP\KEYBD and there find CurLang value. You need to open the file and change the 1033 on that to 1031. '
(Note that I am guessing that your device has the German QWERTZ layout?)
Click to expand...
Click to collapse
I just tested this and it does work. Changing CurLang to 1031 changes the layout to QWERTZ and "?" is under "P" etc... Soft reset needed after change.
People please use the SEARCH on the boards. All these type of problems most likely have been addressed in other devices.

Loco5150
I got total commander installed, where do I find the registry at? Currently I am seeing a directory listing.

go to \\plugins, there is registry folder...

Well we are close! now the z and the y keys are backwards. Any other numbers to try? Thanks!

Ok then your device is not with German layout?
Clownzer said:
I do know the manuals came in some other language.. so not sure.
Click to expand...
Click to collapse
What country is this device from, that would help you know... Did you bought it used?

Bought it brand new from someone on Amazon, not sure what country it was from other than the booklets where not in English.

Clownzer said:
Bought it brand new from someone on Amazon, not sure what country it was from other than the booklets where not in English.
Click to expand...
Click to collapse
Best thing would be that you find out what country your device is from, the booklets should give you that info...
I think that you have bought a device that had a English rom installed by the seller and he did the right localization for it. Now that you did a hard reset everything went back to the original rom setup.
This will be no problem when you find out where your device is from.
Does it have a carrier branding?

Ok it looks like the manuals are in Swedish Language... Viktig Information is written on the main manual.
Also
Sweden address on the back of one of than manuals

[REQ] HD2 Greek support

Hello,
Is it possible to extract the new Greek keyboard (SIP) and T9 from the newly released WM6.5 ROM for htc Topaz and use it in Leo?
I've tried - unsuccessfully - to do so, in order to install the Greek keyboard and T9 LDB to my Leo. The Leo comes with ROM 1.43.405.1 WWE.
Any help is greatly appreciated.

greek english keyboard for leo
http://rapidshare.com/files/307596879/leo_greek_keyboards_GR.cab

tsipistri said:
http://rapidshare.com/files/307596879/leo_greek_keyboards_GR.cab
Click to expand...
Click to collapse
It worked
Thank you very much.

Hello again.
Is it possible to include a Greek T9 dictionary with this Greek keyboard?

Keep in mind that there is a limitation on that. You can not send 160 greek characters per sms with this keyboard yet, it is limited to 70. We are searching for a solution on that.

Frontier said:
Hello again.
Is it possible to include a Greek T9 dictionary with this Greek keyboard?
Click to expand...
Click to collapse
The greek keyboard as well as the greek T9 are already pre-installed in your device. Some image files are missing however, and as a result of that you can not activate Greek language unless you either install the missing images (tsipistri's post) or modify the greek xml files to link to the english images.
These 2 solutions are posted here
I have not tested T9 with tsipistri's solution yet, but with the changed xml files T9 works flawlessly.
Regarding 160 sms, it seems right now that there is no ability for the ezinput application to write in GSM encoding. So, if you need 160 sms you can use Finger keyboard.

Hmmm Greek affiliates from Cosmote and from Chios island....
Well the Greek Leo ROM is out on my hands lads...why such an effort for extra cab files...
Kerdisame k tin Ukrania x8es

athanaso77 said:
Keep in mind that there is a limitation on that. You can not send 160 greek characters per sms with this keyboard yet, it is limited to 70. We are searching for a solution on that.
Click to expand...
Click to collapse
This will be possible with either a new SMS-oriented on-screen keyboard or a in-memory solution patch (like the one used by ACE Hellas) where non-GSM characters are swapped with the correct ones.
For the time being, I have no problem sending Greek SMS of 160 by simply employing some common logic: typing always in UPPERCASE English and switching to Greek uppercase only for the non-latin characters.

Frontier said:
This will be possible with either a new SMS-oriented on-screen keyboard or a in-memory solution patch (like the one used by ACE Hellas) where non-GSM characters are swapped with the correct ones.
For the time being, I have no problem sending Greek SMS of 160 by simply employing some common logic: typing always in UPPERCASE English and switching to Greek uppercase only for the non-latin characters.
Click to expand...
Click to collapse
Amazing idea! It works. I know how to fix it now.
Stay tuned for a working version with 160 sms. I will release it very soon.

English - Greek ezinput keyboard with ability to send 160 characters in greek sms
Instructions
1) Uninstall any other version of this or tsipistri's keyboard
2) Install the attached cab file
3) Click on the white box next to the space bar in order to change between Greek and English Unicode letters.
4) From either English or Greek keyboard click on 12# box in order to write sms with 160 Greek capital letters
5) All removed symbols have been relocated to ABC menu or to page 2 of 12# menu
I am now working on an alternative version that will include 3 different keyboards (Greek, Greek SMS & English)

Great job Step2p, I will try it when I'm back home
Thank you very much for your efforts.

A red skin version with some bugs corrected.
If you haven't noticed it yet, long press entries are already activated in the sms keyboard. If you long press the capital letters you will enter the symbols that normally appear above them.
The file size is larger due to the included skin images.

Step2p said:
Instructions
1) Uninstall any other version of this or tsipistri's keyboard
2) Install the attached cab file
3) Click on the white box next to the space bar in order to change between Greek and English Unicode letters.
4) From either English or Greek keyboard click on 12# box in order to write sms with 160 Greek capital letters
5) All removed symbols have been relocated to ABC menu or to page 2 of 12# menu
I am now working on an alternative version that will include 3 different keyboards (Greek, Greek SMS & English)
Click to expand...
Click to collapse
Ok that's great!but one problem..when turning in Greek there is no this--> ! symbol,only in english layout is over the top of a.

Hellas4 said:
Ok that's great!but one problem..when turning in Greek there is no this--> ! symbol,only in english layout is over the top of a.
Click to expand...
Click to collapse
Long press.. There is a menu coming out with both ά and !. ά is selected to be first choice in non-capital letters

Hi Step2p.
Many thanks for providing this nice keyboard.
There seems to be a problem when using it though, described originally here. The thread suggests that the problem is related to a registry hack, however, I have confirmed that I have the same problem irrespective of the registry setting. I am only noticing this behavior when using the greek keyboard.
Do you think you could have a look?

Italian & greek keybord
Is possible to intall this CAB on an Italian language HD2 ?

tsipistri said:
http://rapidshare.com/files/307596879/leo_greek_keyboards_gr.cab
Click to expand...
Click to collapse
=========================
the above link there is not now.
Help please

Greek sms Probleme on typing
Every keyboard what I can use for Greek writing give me the same problem, after some letters, the text is writing is in random way and I can not follow what I write, Any solution for this?
Regards.

Greek dialer keyboard
Replace files in Windows folder, after unmarking them as read only/system etc